Study guide

Pavement foundations, drainage, and excavation

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Pavement foundations, drainage, and excavation

Key Takeaways Explain This Topic AI

The subgrade must support the intended load without unresolved pumping.

Conventional and permeable foundations manage water differently.

Excavation depth includes every designed layer and finish elevation.

Last updated: October 2026

Note

A conventional paver system needs an adequate subgrade, specified foundation, consistent bedding, joint fill, and edge restraint. Select drainage, separation, density, and thickness from the actual design and CMHA/manufacturer guidance rather than a universal Oregon prescription.

Flexible pavement mechanics and specifications

Interlocking concrete pavement transfers load through the units, joint sand, bedding layer, aggregate base, and subgrade. Edge restraint prevents lateral spreading. A defect in one layer can produce rutting, movement, or ponding even when the pavers themselves are strong. Former ICPI technical guidance is now provided through the Concrete Masonry & Hardscapes Association (CMHA).

Determine the service loads and foundation design before excavation. Pedestrian work, residential driveways, roads, and permeable pavement can need different thicknesses and drainage details. The manufacturer's installation specification and project design govern exact depths, reinforcement, and material requirements. A customary section is an example, not a universal Oregon legal minimum. CMHA construction guidance .

Soil Subgrade Evaluation, Drainage Slope, and Pumping Conditions

The native soil subgrade forms the ultimate load-bearing foundation for any hardscape project. Before placing aggregate base rock, landscape contractors must evaluate subgrade soil mechanics, moisture conditions, and bearing capacity, typically quantified by the California Bearing Ratio (CBR) . Granular soils (clean gravels and sands) exhibit high CBR values (10% to 20%+) and excellent natural drainage. Conversely, fine-grained cohesive soils (silts and clays) exhibit low CBR values (2% to 5%) and are highly susceptible to moisture-induced volume changes and loss of shear strength.

Evaluate the exposed subgrade

Observe soft spots, organic material, buried debris, and water movement after excavation. Proof rolling, where appropriate and specified, reveals deflection or pumping under a controlled load. Equipment and load must suit site access, utilities, adjacent structures, and the design; a heavy highway roller is not a universal requirement for a residential patio.

Do not place base over an unresolved pumping area and expect a thin fabric to provide structural strength. Improve drainage, remove unsuitable material, or obtain the specified stabilization design. Geotextile separation limits intermixing; geogrid reinforcement performs a different function. Neither eliminates the need for an adequate subgrade and outlet.

Saturated soils and pumping

Wet fine soil can deflect and pump into an aggregate layer under load, weakening the foundation. The magnitude depends on soil, moisture, load, and section; do not assign a universal fifty-percent capacity loss. Determine whether drainage, excavation and replacement, stabilization, or a revised foundation is required.

A separator can reduce intermixing but is not automatically structural reinforcement. Select fabric filtration, strength, survivability, overlap, and anchorage for the actual materials. A geogrid can reinforce an approved foundation design but is not a universal cure for low CBR. Obtain the required design when field conditions differ from assumptions.

Drainage plane

Set subgrade and base to the approved drainage geometry, with the intended outlet and no local depressions. Conventional dense-graded pavement and permeable pavement use different water-management arrangements. A dense base does not make every joint impermeable, and open joints do not make an entire conventional foundation a designed infiltration system.

Use the specified finished slope and verify transitions, thresholds, and drains. One percent equals 0.12 inch per foot; one-eighth inch per foot is approximately 1.04 percent. Two percent equals 0.24 inch per foot; one-quarter inch per foot is approximately 2.08 percent. Label rounded construction pitches as approximations.

Calculating Excavation Depths and Lateral Base Extensions

Accurate excavation depth calculation is vital for ensuring finished hardscape surfaces align flush with adjoining doorways, thresholds, garage aprons, and landscape turf lines while accommodating necessary structural thicknesses.

The fundamental formula for calculating total profile cut depth is: Total Cut Depth = T paver + T bedding + T base \text{Total Cut Depth} = T_{\text{paver}} + T_{\text{bedding}} + T_{\text{base}} Total Cut Depth = T paver ​ + T bedding ​ + T base ​

Paver Thickness ( T paver T_{\text{paver}} T paver ​ ): Standard residential pedestrian pavers are manufactured to a nominal thickness of 2-3/8 inches (60 mm) . Vehicular driveways, municipal crosswalks, and commercial plazas require pavers with a thickness of 3-1/8 inches (80 mm) to resist wheel shear stresses.

Bedding Sand Layer ( T bedding T_{\text{bedding}} T bedding ​ ): Screeded to a uniform thickness of 1.0 inch (25 mm) in an uncompacted state. During vibratory compaction of the paver units, bedding sand intrudes upward into the bottom 3/8 to 1/2 inch of the paver joints, yielding a compacted bedding layer of approximately 7/8 inch.

Compacted Aggregate Base ( T base T_{\text{base}} T base ​ ): Varies depending on vehicular loading, native soil bearing strength, and frost depth.

Excavation Profile Depth Calculation by Application

Pavement Application Paver Thickness Bedding Sand (Loose) Compacted Aggregate Base Total Excavation Cut Depth Min. Lateral Base Extension

Pedestrian Walkway / Patio 2-3/8" (60 mm) 1.0" (25 mm) 4.0" to 6.0" (ODOT 3/4"-0) 7-3/8" to 9-3/8" 6.0" past edge restraint

Residential Driveway (Standard) 2-3/8" (60 mm) or 3-1/8" (80 mm) 1.0" (25 mm) 6.0" to 8.0" (ODOT 3/4"-0) 9-3/8" to 12-1/8" 6.0" to 8.0" past edge restraint

Vehicular Driveway (Weak Clay / CBR < 3%) 3-1/8" (80 mm) 1.0" (25 mm) 10.0" to 12.0" (ODOT 3/4"-0) 14-1/8" to 16-1/8" 10.0" to 12.0" past edge restraint

Commercial Streetscape / Heavy Loading 3-1/8" (80 mm) 1.0" (25 mm) 12.0"+ (ODOT 1"-0 & 3/4"-0) 16-1/8"+ 12.0" past edge restraint

Lateral Base Extension (Shoulder Support)

A common hardscape installation error is excavating an aggregate trench to the exact finished dimensions of the paver surface. When edge restraint spikes are driven along the extreme outer boundary of an un-extended base, wheel loads force the outer pavers outward, shearing the base edge and collapsing the perimeter.

CMHA guidance commonly extends the aggregate foundation beyond the edge restraint to provide support and room for anchorage. Use the actual design and restraint instructions; a six-inch shoulder is a common detail rather than a universal Oregon law. For an example explicitly specifying a six-inch shoulder on each side, the excavation is twelve inches wider than the finished walkway. Verify that the specified shoulder supports the restraint and fits property and utility limits.