Study guide

Earth pressure, stone walls, and footings

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Earth pressure, stone walls, and footings

Key Takeaways Explain This Topic AI

Under the simplified model, earth force grows with height squared.

Through stones connect wall mass rather than anchor it into soil.

Footings and reinforcing details depend on soil and loading.

Last updated: October 2026

Note

Wall design depends on height, soil, water, slopes, surcharge, and consequences of failure. Oregon residential rules distinguish walls affecting regulated buildings from local regulation of other walls. Check permit and design requirements before construction; four feet is not a universal exemption.

Lateral Earth Pressure Physics and Wall Batter

Every retaining wall is a civil engineering structure designed to hold back an unstable wedge of soil. The retained earth exerts a horizontal force known as active lateral earth pressure ( P A P_A P A ​ ) against the back of the wall stem. According to classical Rankine and Coulomb soil mechanics, the magnitude of this lateral thrust increases quadratically with the square of the wall height: P A = 1 2 K A γ H 2 P_A = \frac{1}{2} K_A \gamma H^2 P A ​ = 2 1 ​ K A ​ γ H 2

Where:

K A K_A K A ​ = Coefficient of active earth pressure (dependent on the soil's internal friction angle ϕ \phi ϕ )

  • γ \gamma γ = Unit weight of the soil (typically 110 to 130 lbs/ft³ for compacted earth)
  • H H H = Total retained soil height

This lateral thrust acts horizontally at a point one-third of the height ( H / 3 H/3 H /3 ) above the base of the wall, creating an overturning moment ( M O = P A × H 3 M_O = P_A \times \frac{H}{3} M O ​ = P A ​ × 3 H ​ ) that attempts to rotate the wall forward around its front toe, as well as a horizontal sliding force attempting to push the wall across its foundation.

The Engineering Function of Wall Batter

In a gravity retaining wall, the primary counteracting force is the downward gravitational force of the wall's own weight ( W W W ) , which produces a stabilizing resisting moment ( M R M_R M R ​ ) .

To increase this resisting moment without requiring excessively thick walls, masonry structures incorporate an intentional backward inclination known as wall batter :

Standard Landscape Batter Angle: Built leaning back into the retained hillside at a rate of 1 to 2 inches of setback per vertical foot of height (representing an inclination ratio of approximately 1:12 to 1:6 ).

Mechanical Benefit of Batter: Incline shifts the center of gravity of the masonry mass backward toward the retained slope. This dramatically increases the horizontal lever arm between the center of gravity and the toe pivot point, significantly increasing M R M_R M R ​ . Furthermore, a battered wall face directs a portion of the downward soil weight onto the stepped back of the wall, using the earth's own gravity to hold the wall down.

Dry-Stack Natural Stone Retaining Walls

Dry-stack stone masonry is an ancient landscape construction technique that relies exclusively on gravity, stone shape, friction, and skilled interlocking without a single drop of mortar. Because dry-stack walls lack rigid mortar joints, they represent flexible retaining systems that freely drain water through open joints and tolerate minor subgrade movement without cracking.

Dry-stack stone construction

Select durable stones with bearing surfaces suited to the design. Build on an adequate foundation, maintain the specified batter, avoid continuous vertical joints, and tie the front and rear of the wall with appropriate through stones or other designed bonding. Through stones connect the wall mass; they are not anchors into the retained soil.

Place drainage and backfill as designed and avoid trapping water. Height, base width, stone shape, soil, surcharge, and slope determine feasibility. Do not use one fixed through-stone spacing or width ratio as a universal safe design. Seek engineered review when loads or consequences demand it.

Mortared Concrete Masonry Unit (CMU) and Stone Walls

In contrast to dry-stack masonry or SRWs, mortared retaining walls are rigid structures . Because hardened mortar possesses high compressive strength but relatively low tensile strength, a mortared wall cannot tolerate differential settlement or frost heave without developing unsightly and structurally compromising diagonal shear cracks.

Footings and reinforcement

Mortared masonry walls require a foundation and structural design suited to bearing soil, frost conditions, lateral loads, and drainage. Footing width and depth, bar sizes, cover, laps, and grout placement are project-specific. A generic two-times-wall-width footing or forty-bar-diameter lap is not a universal code prescription.

Use the approved detail and inspect the subgrade before concrete conceals it. Place reinforcement on supports at the required cover and maintain continuity through corners and changes in grade. Do not substitute hollow ungrouted units where the design requires reinforced grouted cells. Keep mortar joints, cleanouts, grout placement, and curing consistent with the masonry system.

Application check

The simplified earth-pressure equation assumes specified soil and geometry. Water pressure, slopes, surcharge, compaction-induced loading, and layered soils can change the result. Use it to understand relationships, not to certify a field wall. Record the actual retained height and design assumptions, and obtain review when a vehicle pad or another wall is added above the retained area.