Study guide
Treated lumber and outdoor exposure
Oregon Landscape Contractor License Study Guide 2026
Track your progress as you read
Finished sections get a check mark.
1 1. Licensing and business: 1
Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility
2 2. Licensing and business: 2
Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens
3 3. Licensing and business: 3
LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing
4 4. Site safety and utilities
Excavation safety and hazard controls Oregon 811 notices and utility protection
5 5. Soil science and site preparation: 1
Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity
6 6. Soil science and site preparation: 2
Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds
7 7. Plants, turf, and establishment: 1
Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions
8 8. Plants, turf, and establishment: 2
Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth
9 9. Plants, turf, and establishment: 3
Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations
10 10. Plants, turf, and establishment: 4
Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials
11 11. Paving and concrete: 1
Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout
12 12. Paving and concrete: 2
Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing
13 13. Paving and concrete: 3
Concrete joints and curing
14 14. Walls and exterior structures: 1
Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings
15 15. Walls and exterior structures: 2
Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure
16 16. Walls and exterior structures: 3
Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions
17 17. Walls and exterior structures: 4
Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality
18 18. Design, grading, and drainage: 1
Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures
19 19. Design, grading, and drainage: 2
Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall
20 20. Design, grading, and drainage: 3
Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets
21 21. Design, grading, and drainage: 4
Bioretention sizing, media, and plants Swales and current DEQ erosion controls
22 22. Irrigation design and operation: 1
Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting
23 23. Irrigation design and operation: 2
Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage
24 24. Irrigation design and operation: 3
Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves
25 25. Irrigation design and operation: 4
Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions
26 26. Irrigation design and operation: 5
Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup
27 27. Backflow and potable protection: 1
Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies
28 28. Backflow and potable protection: 2
Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports
Treated lumber and outdoor exposure
Key Takeaways Explain This Topic AI
Treatment category must fit above-ground, ground-contact, or demanding structural use.
Protect cut surfaces as the treatment manufacturer directs.
Naturally durable heartwood and sapwood have different decay resistance.
Last updated: October 2026
Note
Match the wood's treatment category to exposure and structural importance, protect field cuts, and select compatible hardware. Oregon's residential low-deck exemption uses a not-more-than-thirty-inch height condition; do not import the two-hundred-square-foot rule for other structures into it.
Pressure-Treated Lumber Standards (AWPA Use Categories)
In the wet maritime climate of western Oregon and the freeze-thaw zones of eastern Oregon, wood exposed to exterior elements faces rapid biological degradation from wood-decay fungi (brown rot, white rot, and soft rot) and wood-destroying insects (subterranean termites, dampwood termites, and carpenter ants).
The American Wood Protection Association (AWPA) establishes the definitive national standards for pressure-treated wood through its Use Category (UC) System . Specifying the correct AWPA Use Category is critical for structural longevity and building code compliance:
- Treatment category Exposure Selection consideration
- UC1 / UC2 Interior dry / damp Not a substitute for treatment rated for weather exposure
- UC3A Above-ground exterior, coated with rapid runoff Confirm the protected use and maintenance conditions
- UC3B Above-ground exterior, uncoated or poor runoff Not rated for direct ground contact
UC4A General ground contact Appropriate general ground-contact treatment; some demanding applications require more
UC4B / UC4C Heavy / extreme ground-contact duty Critical structural use or severe conditions can control the category
UC5 Marine salt or brackish exposure Category varies with marine environment
Read the treatment tag, wood grade, preservative, retention, and approved use. UC categories describe exposure, not a guarantee of structural adequacy. Ground-contact treatment does not establish an allowable beam span or make a board suitable for drinking-water contact. AWPA treatment selection information .
Warning
A board labeled above-ground use is not appropriate merely because it is green or sold as “deck lumber.” Direct soil contact needs a ground-contact rating, and difficult-to-replace critical members can need higher treatment even above ground. Verify the design and label instead of predicting one fixed three-to-five-year service life.
Modern Preservative Chemistries
Following the phase-out of Chromated Copper Arsenate (CCA) for residential applications, modern wood treaters utilize waterborne copper-based formulations:
Alkaline Copper Quaternary (ACQ) and Copper Azole (CA / MCA): The dominant residential preservative systems. These formulations combine copper (a powerful, natural fungicide) with organic co-biocides—quaternary ammonium compounds in ACQ, or tebuconazole in CA—to protect against copper-tolerant fungi and insects. Micronized Copper Azole (MCA) utilizes microscopic, sub-micron copper particles suspended in water rather than chemically dissolved copper, resulting in a lighter wood color, improved surface appearance, and reduced chemical leaching.
Disodium Octaborate Tetrahydrate (DOT / SBX - Borates): Highly effective against wood-boring insects and decay, but water-soluble . Borate preservatives rapidly leach out when exposed to rain or soil moisture. Use only in the exposure permitted by the treatment listing. Ordinary diffusible borate treatment is not appropriate for unprotected weather or ground contact; do not assume all borate products and protected applications have identical limitations.
Mandatory Field End-Cut Treatment
Commercial pressure treatment forces preservative chemicals deep into the permeable outer sapwood of framing lumber, but refractory softwoods like Douglas-fir and Hem-fir contain dense inner heartwood that resists full preservative penetration. When landscape timbers or posts are cross-cut, notched, mitered, or drilled on the job site, the untreated inner heartwood is exposed directly to moisture and fungal spores.
Field treatment: Treat cuts, holes, and damage as required by the applicable AWPA M4 specification, product instructions, and code. Field treatment protects exposed wood; it does not reproduce full pressure treatment or make an incorrect use category acceptable.
Compatible product: Select the prescribed preservative, concentration, and application method for the original treatment and exposure. Copper naphthenate is a common exterior field treatment, but a generic “one-to-two-percent minimum” is not one exact universal requirement. Follow label precautions and allow the required preparation and drying before finishing or assembly.
Naturally Rot-Resistant Wood Species
Contractors frequently utilize native, naturally durable softwood species as sustainable, chemical-free alternatives to pressure-treated lumber in high-end residential landscaping.
Application check
At delivery, keep treatment tags and grading information with the job record. Two boards of the same nominal size can have different grades, moisture conditions, preservatives, and permitted use. Reject material that does not meet the accepted specification, and confirm an equivalent before substituting. Storage should protect the stock and maintain access to labels so the crew can distinguish structural and appearance materials.
Exposure review example
For a fence, examine both the post below grade and its ground-line zone, where moisture and oxygen can support decay. A trellis rail above grade may dry readily, while a buried retaining timber remains damp and is difficult to replace. The same retail treatment tag may not meet both specifications. A capped post top can reduce direct wetting but will not repair untreated end grain buried in soil. Plan cuts before installation so required field treatment can reach the surfaces that later become concealed.
Store wood with ventilation and keep it out of pooled water. Identify which members are structural and which are appearance trim before substitution. If a delivered species or treatment differs from the approved design, obtain an accepted equivalent; appearance and nominal size alone do not demonstrate equal strength, decay resistance, or fastener compatibility.