Study guide

Low-voltage lighting design, wiring, and commissioning

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Low-voltage lighting design, wiring, and commissioning

Key Takeaways Explain This Topic AI

Total fixture demand, transformer capacity, cable length, and voltage drop must be checked together.

Low voltage does not remove line-voltage licensing, product listing, or local permit requirements.

Aim and commission lights at night with mature plants and maintenance access in mind.

Last updated: October 2026

Design for visibility and use

Define what the lighting should accomplish: safe movement, step visibility, a focal tree, an entrance, or a gathering area. Distinguish task lighting from accent lighting. More brightness is not automatically better; excessive glare can make a path harder to see and affect neighbors. Aim light at the intended surface and shield direct view of the lamp where possible.

Review the daytime plan and the mature planting. A fixture placed behind a small shrub can disappear as it grows, while a stake beside a mower route can be damaged. Leave access for lamp or driver replacement, cleaning, and adjustment. Coordinate fixtures with irrigation spray, drains, mulch, and root protection. A below-grade uplight needs a product and detail suited to water exposure, not merely a decorative housing.

Select outdoor-listed fixtures, transformer, cable, connectors, and controls compatible as a system. Wet-location requirements, submersible use, supply protection, and manufacturer ratings are distinct. A fixture suitable for rain is not automatically approved for a pond. Low-voltage landscape scope does not authorize an LCP to install a new line-voltage branch circuit; use the appropriate electrical contractor and local permit review.

Load and transformer capacity

Total the actual connected fixture demand. Ten six-watt fixtures use sixty watts. Under an illustrative design rule limiting a one-hundred-watt transformer to eighty percent of rating, allowable load is eighty watts, leaving twenty watts for that design's reserve. The eighty-percent assumption is not universal: follow the transformer's continuous-load, output, and circuit instructions, including any VA rating and LED compatibility.

Keep output circuits within their individual limits as well as the overall capacity. A two-hundred-watt transformer does not necessarily permit all two hundred watts on any one terminal. Verify output voltage, number of circuits, protective devices, and permitted lamp or driver types. Include expected expansion deliberately rather than attach more fixtures until lights appear dim.

For a simplified twelve-volt, forty-eight-watt resistive load, current is forty-eight divided by twelve, or four amperes. Actual LED input behavior and transformer data can require a different design method. Use the fixture and transformer information rather than assume all lighting behaves as a simple resistance.

Cable and voltage drop

Voltage drop increases with current, conductor resistance, and distance. A basic two-conductor circuit requires accounting for outgoing and return paths. If each conductor has an assumed resistance of 0.0016 ohm per foot and one-way length is one hundred feet, total loop resistance is 0.32 ohm. At four amperes, the simplified drop is 1.28 volts. A twelve-volt source would leave about 10.72 volts at the far load under those assumptions.

This example assumes the entire current travels the full distance; distributed fixtures along a run require segment-by-segment analysis. A larger conductor, shorter run, several home runs, or approved higher-voltage tap can reduce a problem. Do not increase transformer voltage beyond fixture limits to compensate blindly. Check minimum and maximum voltage at the actual fixtures, including the nearest fixture, which may receive more voltage than the farthest.

Use cable suited to the installation and burial conditions, protect crossings and areas subject to tools or traffic, and maintain required separation. Join conductors with listed outdoor/direct-burial connectors and the manufacturer's preparation method. An indoor wire nut wrapped in tape is not a durable buried splice. Record cable routes and junction locations for future excavation and troubleshooting.

Controls and commissioning

Timers, photocells, and compatible smart controls determine operating hours. Locate a photocell where it senses ambient light rather than the fixture it controls; otherwise cycling can occur. Set the schedule to the owner's needs and applicable local lighting limits. Check the behavior after power interruption and explain manual override.

Commission at night. Verify every fixture, measure required voltages, check transformer loading, and adjust aiming from the user's actual approach. Inspect steps for clear edges without glare and paths for dark gaps. Aiming at foliage alone may obscure the surface people need to walk on. Check from adjacent property and street viewpoints to identify unwanted spill.

Troubleshoot by circuit: confirm source and controls, then output, cable, connections, and fixtures. If an entire branch is dark, a common supply fault is more likely than simultaneous lamp failures. If only the far end is dim, inspect loading, cable length, and connection resistance. Deenergize before modifying connections and leave the owner a circuit map, schedule, and maintenance instructions. LCB's LRB reference notes that low-voltage lighting and irrigation wiring may require local permits; verify the actual jurisdiction rather than promise permit-free work.

Reference table

  • Lighting design check Needed information
  • Transformer load Fixture demand and circuit ratings
  • Voltage drop Current, route, conductor resistance, and load locations
  • Location Wet or submersible listing, glare, plant growth, access
  • Commissioning Night aiming, output readings, controls, and schedule