Study guide

Drawing sets, legends, and scale

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Drawing sets, legends, and scale

Key Takeaways Explain This Topic AI

Use the current revision and project legend.

Architectural and engineering scales express distances differently.

Check reproduction size against a known dimension before measuring.

Last updated: October 2026

Note

Quick Reference: Landscape plan sets provide the legal and technical blueprint for exterior site construction. Interpreting these documents accurately requires understanding the distinction between fractional architectural scales (e.g., 1 / 4 " = 1 ′ − 0 " 1/4" = 1'-0" 1/4" = 1 ′ − 0" ) and decimal civil engineering scales (e.g., 1 " = 20 ′ 1" = 20' 1" = 2 0 ′ ), recognizing topographic contour conventions (dashed existing vs. solid proposed), and locating critical spot elevations (FFE, TC, FL) that govern grading and drainage installations.

Structure and Sheet Types of Landscape Construction Drawing Sets

A professional landscape construction drawing set is a coordinated package of legal contract documents. Each sheet serves a specialized technical purpose, translating a landscape architect's or civil engineer's design into precise spatial dimensions, material specifications, and grading requirements for the contractor.

A complete set of landscape construction plans typically contains the following distinct sheets in sequential order:

Cover Sheet and Sheet Index: Contains the project name, client identity, site legal description, sheet index, vicinity map, governing municipal jurisdictions, and a project contact directory.

Demolition and Tree Protection Plan: Identifies existing site features to be removed, structures to be protected, and the critical root zones of preserved trees surrounded by mandatory Tree Protection Zones (TPZ) and chain-link or appropriate protective fencing.

Existing Conditions / Topographic Survey: Prepared by a licensed professional land surveyor, this sheet establishes property boundary lines, legal easements (utility, drainage, access), established horizontal and vertical benchmarks, and existing topographic contours.

Site Layout and Dimensioning Plan: Establishes horizontal spatial geometry for all proposed hardscape elements—walkways, patios, retaining walls, vehicular pavements, outdoor kitchens, and landscape carpentry structures—using baseline offsets, centerline radii, and fixed property line setbacks.

Grading and Drainage Plan: Details all earthwork operations, displaying existing (dashed) and proposed (solid) contour lines, spot elevations, drainage swales, catch basins, retention ponds, finished floor elevations, and pipe invert elevations.

Planting Plan: Illustrates the precise geographical location of all plant material, keyed via alpha-numeric symbols to a comprehensive Plant Schedule listing botanical names, common cultivars, container/caliper sizes, root conditions (e.g., containerized, balled-and-burlapped [B&B], or bare-root), and quantities.

Irrigation Plan: Outlines the hydraulic distribution system, including the potable water Point of Connection (POC), backflow prevention assembly, static water pressure, water meter size, mainline and lateral piping, electric remote control valves, sprinkler head layouts with precipitation rates, and controller specifications.

Construction Detail Sheets: Provide large-scale, structural cross-sections and assembly elevations for specialized elements such as segmental retaining walls, concrete footings, paver base sections, steps, pergolas, and subgrade drainage connections.

The Title Block, Legend, and Revision Block

Every sheet within a construction set includes standardized administrative and graphical reference blocks:

Title Block: Located along the right-hand margin or bottom edge of the sheet. It displays the project name and physical address, client name, landscape architect or engineer's professional license stamp and signature, sheet title (e.g., "Grading & Drainage Plan"), sheet number (e.g., C-2.0 or L-1.1), drawing date, and drafter/checker initials.

North Arrow: Establishes spatial orientation. Plan readers must verify whether the arrow indicates True North (astronomical north) or Magnetic North or Project North . Magnetic north follows the local magnetic direction; project north is a drawing orientation that may align with a building or site grid. They are not interchangeable.

Legend (Key of Symbols): Decodes all graphical linework, line weights, hatch patterns, and symbols used on that specific sheet. Legends define property lines, easement boundaries, utility mains (water, gas, electric, sanitary sewer), materials (e.g., flagstone vs. broom-finished concrete), and plant tags.

Revision Block (Delta Schedule): Positioned adjacent to the title block, this table documents post-bid or field-directed design changes. Each revision is marked with a numbered triangular delta symbol (e.g., Δ 1 \Delta 1 Δ1 ), the revision date, a description of the alteration, and the approving designer's initials. On the plan drawing itself, the revised area is enclosed within a scalloped "revision cloud" containing the corresponding delta symbol.

Architectural Scale vs. Civil Engineering Scale

Landscape contractors regularly encounter two fundamentally different measurement scale systems on construction plans: the Architectural Scale and the Civil Engineering Scale . Misinterpreting the scale type will lead to disastrous errors in material takeoffs, spatial layouts, and earthwork bids.

The Architectural Scale

The architectural scale is based on fractions of an inch representing one foot . It is commonly used on architectural and detail drawings; check each sheet rather than infer scale from its subject.

Common Architectural Scales:

  • 1 / 8 " = 1 ′ − 0 " 1/8" = 1'-0" 1/8" = 1 ′ − 0" (Representative Fraction 1 : 96 1:96 1 : 96 )
  • 1 / 4 " = 1 ′ − 0 " 1/4" = 1'-0" 1/4" = 1 ′ − 0" (Representative Fraction 1 : 48 1:48 1 : 48 )
  • 1 / 2 " = 1 ′ − 0 " 1/2" = 1'-0" 1/2" = 1 ′ − 0" (Representative Fraction 1 : 24 1:24 1 : 24 )
  • 1 " = 1 ′ − 0 " 1" = 1'-0" 1" = 1 ′ − 0" (Representative Fraction 1 : 12 1:12 1 : 12 )

3 " = 1 ′ − 0 " 3" = 1'-0" 3" = 1 ′ − 0" (Representative Fraction 1 : 4 1:4 1 : 4 , used for enlarged construction joinery details)

How to Read an Architectural Ruler: Architectural scales are open-divided . The main body of the ruler is divided into whole foot increments marked in ascending order. At the zero end of the scale, an extra segment representing one foot is divided into inches and fractions of an inch (1/2", 1/4", 1/8"). To measure a distance: place the nearest whole foot graduation on one point, and read the remaining fractional inches on the extended scale segment past the zero mark.

The Civil Engineering Scale

The civil engineering scale is based on full inches divided into decimal parts (multiples of 10). It is commonly used on civil and site drawings; a particular sheet or enlarged detail can use a different scale.

Common Civil Engineering Scales:

  • 1 " = 10 ′ 1" = 10' 1" = 1 0 ′ (Ratio 1 : 120 1:120 1 : 120 )
  • 1 " = 20 ′ 1" = 20' 1" = 2 0 ′ (Ratio 1 : 240 1:240 1 : 240 )
  • 1 " = 30 ′ 1" = 30' 1" = 3 0 ′ (Ratio 1 : 360 1:360 1 : 360 )
  • 1 " = 40 ′ 1" = 40' 1" = 4 0 ′ (Ratio 1 : 480 1:480 1 : 480 )
  • 1 " = 50 ′ 1" = 50' 1" = 5 0 ′ (Ratio 1 : 600 1:600 1 : 600 )
  • 1 " = 100 ′ 1" = 100' 1" = 10 0 ′ (Ratio 1 : 1200 1:1200 1 : 1200 )

How to Read an Engineering Ruler: Civil scales are fully divided along their entire length. Each inch is partitioned into 10, 20, 30, 40, 50, or 60 equal increments. Because it is decimal, numbers on the scale can represent tens, hundreds, or thousands of feet. For example, on the "20" scale ( 1 " = 20 ′ 1" = 20' 1" = 2 0 ′ ), each small tick mark represents 1 linear foot; a measurement of 5 major units equals 100 feet.

Plan Scale Representation Scale Family Representative Fraction (RF) Real-World Feet per Plan Inch Primary Landscape Application

3 " = 1 ′ − 0 " 3" = 1'-0" 3" = 1 ′ − 0" Architectural 1 : 4 1:4 1 : 4 0.33 ft 0.33\text{ ft} 0.33 ft ( 4 inches 4\text{ inches} 4 inches ) Paver edge restraints, wood joinery, footings

1 " = 1 ′ − 0 " 1" = 1'-0" 1" = 1 ′ − 0" Architectural 1 : 12 1:12 1 : 12 1.0 ft 1.0\text{ ft} 1.0 ft ( 12 inches 12\text{ inches} 12 inches ) Retaining wall cross-sections, steps, arbors

1 / 2 " = 1 ′ − 0 " 1/2" = 1'-0" 1/2" = 1 ′ − 0" Architectural 1 : 24 1:24 1 : 24 2.0 ft 2.0\text{ ft} 2.0 ft Small courtyard hardscapes, water features

1 / 4 " = 1 ′ − 0 " 1/4" = 1'-0" 1/4" = 1 ′ − 0" Architectural 1 : 48 1:48 1 : 48 4.0 ft 4.0\text{ ft} 4.0 ft Residential landscape and planting layouts

1 / 8 " = 1 ′ − 0 " 1/8" = 1'-0" 1/8" = 1 ′ − 0" Architectural 1 : 96 1:96 1 : 96 8.0 ft 8.0\text{ ft} 8.0 ft Large commercial planting and site layouts

1 " = 10 ′ 1" = 10' 1" = 1 0 ′ Engineering 1 : 120 1:120 1 : 120 10.0 ft 10.0\text{ ft} 10.0 ft Detailed grading plans, parking lot layout

1 " = 20 ′ 1" = 20' 1" = 2 0 ′ Engineering 1 : 240 1:240 1 : 240 20.0 ft 20.0\text{ ft} 20.0 ft Residential site grading, utility service plans

1 " = 30 ′ 1" = 30' 1" = 3 0 ′ Engineering 1 : 360 1:360 1 : 360 30.0 ft 30.0\text{ ft} 30.0 ft Medium commercial site and park layouts

1 " = 50 ′ 1" = 50' 1" = 5 0 ′ Engineering 1 : 600 1:600 1 : 600 50.0 ft 50.0\text{ ft} 50.0 ft Large subdivision civil grading, bioswales

1 " = 100 ′ 1" = 100' 1" = 10 0 ′ Engineering 1 : 1200 1:1200 1 : 1200 100.0 ft 100.0\text{ ft} 100.0 ft Master community plans, regional drainage basins

Warning

Never Measure Scaled Plans from Unverified Prints: Modern digital workflows frequently involve printing 24" x 36" (Architectural D) drawings onto 11" x 17" (Tabloid / B) paper or viewing auto-scaled PDFs. This destroys fractional scale integrity. Always locate the printed graphic bar scale and verify it with a physical ruler before taking scaled field dimensions.