Study guide
Air gaps and physical potable-water separation
Oregon Landscape Contractor License Study Guide 2026
Track your progress as you read
Finished sections get a check mark.
1 1. Licensing and business: 1
Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility
2 2. Licensing and business: 2
Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens
3 3. Licensing and business: 3
LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing
4 4. Site safety and utilities
Excavation safety and hazard controls Oregon 811 notices and utility protection
5 5. Soil science and site preparation: 1
Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity
6 6. Soil science and site preparation: 2
Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds
7 7. Plants, turf, and establishment: 1
Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions
8 8. Plants, turf, and establishment: 2
Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth
9 9. Plants, turf, and establishment: 3
Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations
10 10. Plants, turf, and establishment: 4
Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials
11 11. Paving and concrete: 1
Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout
12 12. Paving and concrete: 2
Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing
13 13. Paving and concrete: 3
Concrete joints and curing
14 14. Walls and exterior structures: 1
Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings
15 15. Walls and exterior structures: 2
Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure
16 16. Walls and exterior structures: 3
Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions
17 17. Walls and exterior structures: 4
Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality
18 18. Design, grading, and drainage: 1
Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures
19 19. Design, grading, and drainage: 2
Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall
20 20. Design, grading, and drainage: 3
Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets
21 21. Design, grading, and drainage: 4
Bioretention sizing, media, and plants Swales and current DEQ erosion controls
22 22. Irrigation design and operation: 1
Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting
23 23. Irrigation design and operation: 2
Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage
24 24. Irrigation design and operation: 3
Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves
25 25. Irrigation design and operation: 4
Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions
26 26. Irrigation design and operation: 5
Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup
27 27. Backflow and potable protection: 1
Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies
28 28. Backflow and potable protection: 2
Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports
Air gaps and physical potable-water separation
Key Takeaways Explain This Topic AI
Measure an air gap from the supply outlet to the receiving vessel's flood-level rim.
The usual basic minimum is twice the effective outlet diameter and at least one inch, subject to applicable table and wall conditions.
A submerged hose or added extension can defeat an otherwise adequate physical separation.
Last updated: October 2026
Physical separation
An air gap is an unobstructed vertical separation through free atmosphere between the potable supply outlet and a receiving vessel's flood-level rim. Unlike a check assembly, it separates the two water systems physically. A properly maintained approved gap protects against both backsiphonage and backpressure because downstream water cannot remain connected to the supply outlet.
The flood-level rim is the level at which a vessel would overflow, not its ordinary operating water surface. A float valve can hold normal water several inches lower, but the valve can fail. Measuring only to the normal level understates the exposure. Use the actual rim and approved design, including any nearby wall or obstruction that affects the required gap.
The basic commonly taught minimum is twice the effective supply-outlet diameter and never less than one inch. Applicable plumbing tables and sidewall effects can require more. Do not use the nominal pipe size automatically when the effective outlet differs, and do not claim the simple formula overrides every fixture-specific listing. EPA cross-connection guidance explains the physical principle.
Measurement examples
For an effective outlet diameter of one-half inch under the basic condition, twice the diameter is one inch, which also meets the one-inch floor. A one-quarter-inch outlet still needs at least one inch, not one-half inch. A three-quarter-inch effective outlet requires at least one and one-half inches under the same basic condition. State the assumed condition before selecting an answer.
Suppose a fountain basin's flood rim is elevation 100.00 feet and the outlet's lowest point is 100.20 feet. Separation is 0.20 foot, or 2.4 inches. Compare that distance with the applicable outlet-based requirement and table conditions. Do not compare a distance in feet directly with a diameter in inches. If a later stone cap raises the rim, recalculate the gap.
An outlet near a wall can have a different approved clearance requirement because water can bridge or splash differently. Obtain the applicable code detail rather than move the pipe arbitrarily. The outlet must remain unobstructed; decorative covers or attached tubing can change its effective location.
Application to landscape systems
A potable supply can discharge into an appropriately designed storage or makeup tank through an approved air gap. The downstream landscape system then needs its own pump or gravity arrangement. Physical separation interrupts supply pressure; an air gap is not a transparent substitute for a pressurized pipe connection with no redesign.
For a pond makeup arrangement, position the outlet so high water cannot submerge it, provide safe overflow, and prevent an owner from attaching a hose extension into the pond. The extension creates a potential direct cross-connection even if the original rigid outlet had adequate clearance. A hose held above water by habit is not a permanent approved protection detail.
An RP relief discharge also needs an approved air-gap drainage arrangement, but that drainage air gap has a different role from the potable supply separation. It prevents a drain connection from contaminating the relief port. A small air gap at the drain does not turn the entire irrigation supply into a tank-fed physically separated system.
Failure modes and maintenance
Gaps fail through alteration, flooding, blocked overflow, submerged hoses, changed rims, or obstruction. Inspect after changes to paving, enclosures, planters, or basin equipment. A sump or enclosure that can flood may defeat the intended separation. Protect the receiving system's overflow and drainage as part of maintaining the gap.
Avoid splash and unsafe discharge without enclosing the gap in a way that defeats its function. Use the approved fixture or installation detail. A splash guard cannot connect the potable outlet to contaminated water. Protect the supply from physical damage and keep access for inspection and cleaning.
Record the approved dimensions and source of the requirement. If the owner later adds a pressure pump, chemical treatment, or another source downstream, the gap may remain protective when correctly maintained, but the complete system still needs review for its new use. Follow water-supplier premises-isolation requirements; internal physical separation does not automatically remove a required service assembly.
Choose from capability and feasibility
An air gap is often the clearest protection concept, but it can require storage, pumping, overflow, and structural space. An approved RP may be practical for a pressurized health-hazard connection, while a DC is limited to permitted non-health hazards. Select the solution with the authority, based on hydraulic conditions and the actual installation, not merely the lowest component price.
Reference table
- Effective outlet diameter Twice diameter Basic minimum under stated condition
- 0.25 inch 0.5 inch 1 inch
- 0.5 inch 1 inch 1 inch
- 0.75 inch 1.5 inches 1.5 inches
Check applicable table and wall conditions; measure to the flood-level rim.