Study guide
6.3 Types of Control Methods
Oregon Pesticide Applicator Laws & Safety Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Federal Pesticide Law, FIFRA & the Worker Protection Standard
1.1 FIFRA, EPA Authority & "The Label Is the Law" 1.2 Registration Pathways: Sections 3, 18, 24(c) & 25(b) 1.3 Restricted-Use vs. General-Use Pesticides 1.4 WPS: Covered Establishments, Notification & Training 1.5 Application Exclusion Zones, REIs & Early Entry 1.6 WPS: Decontamination & Emergency Medical Assistance 1.7 Other Federal Laws: FFDCA, ESA, OSHA/HCS & the Clean Water Act
2 Chapter 2: The Oregon Pesticide Control Act, ODA & State Agencies
2.1 ORS Chapter 634, OAR 603-057 & the Oregon Agency Map 2.2 ODA Authority, Investigations & Oregon Product Registration 2.3 Oregon Chemical-Specific Rules That Override the Label 2.4 Buffers, Forest Notification, Watershed Programs & Co-Existence
3 Chapter 3: Oregon Licensing, Certification & Recertification
3.1 Oregon Pesticide Licence Types 3.2 Licence Categories & When Oregon Requires a Licence 3.3 Certification Periods, Exams & Recertification Credits
4 Chapter 4: Oregon Recordkeeping, Prohibited Acts & Enforcement
4.1 Oregon Pesticide Application Records 4.2 Dealer, Private-Applicator, WPS & School Records 4.3 Prohibited Acts, Inspections & Penalties
5 Chapter 5: Pest Biology & Identification
5.1 Insect Anatomy, Metamorphosis & Mouthparts 5.2 Weeds, Plant Diseases & Non-Insect Pests 5.3 Vertebrate & Mollusk Pests, Scouting & Degree-Days
6 Chapter 6: Integrated Pest Management & Resistance Management
6.1 IPM Definition, Principles & Advantages 6.2 Economic Threshold & Economic Injury Level 6.3 Types of Control Methods 6.4 Pesticide Resistance & Mode-of-Action Rotation
7 Chapter 7: Pesticide Labeling & Safety Data Sheets
7.1 Legal Status of the Label, Its Anatomy & Its Numbers 7.2 Signal Words, Toxicity Categories & First Aid Statements 7.3 Directions for Use, Rates, REI & PHI 7.4 Environmental Hazards, Storage & Disposal, and Label Language 7.5 Safety Data Sheets & Complex Label Interpretation
8 Chapter 8: Pesticide Formulations, Adjuvants & Tank Mixing
8.1 Liquid Pesticide Formulations (EC, SC, SL, ME, ULV) 8.2 Dry and Specialty Formulations (WP, WDG, G, Baits & Fumigants) 8.3 Adjuvants, Surfactants & Spray Water Quality 8.4 Compatibility, the Jar Test & Tank-Mixing Sequence
9 Chapter 9: Toxicology, Exposure, First Aid & Reporting
9.1 Toxicity, Hazard & the Dose-Response Relationship 9.2 LD50, LC50, Toxicity Categories & Acute vs. Chronic Effects 9.3 Routes of Exposure & Absorption 9.4 Chemical Families, Signs & Symptoms of Poisoning 9.5 Emergency First Aid, Antidotes & Cholinesterase Monitoring 9.6 Oregon Incident Reporting & Emergency Contacts
10 Chapter 10: Personal Protective Equipment
10.1 PPE Selection, Chemical Resistance & the EPA Category Chart 10.2 PPE Components, Donning, Doffing & Care 10.3 Respirator Types, Filters & Cartridges 10.4 Fit Testing, Medical Evaluation & Cartridge Change-Out
11 Chapter 11: Pesticides in the Environment & Drift Management
11.1 Environmental Fate, Persistence & Degradation 11.2 Leaching, Runoff & Protecting Ground and Surface Water 11.3 Oregon Water Quality Programs 11.4 Drift Management: Particle Drift, Vapour Drift & Meteorology 11.5 Non-Target Safety: Pollinators, Wildlife & Endangered Species
12 Chapter 12: Application Equipment & Calibration
12.1 Sprayer Types, Components & Plumbing 12.2 Nozzles, Droplet Size & Sprayer Maintenance 12.3 Sprayer Calibration Principles, Formulas & Field Methods 12.4 Mixing, Loading & Pesticide Mathematics
13 Chapter 13: Storage, Transport, Disposal & Spill Response
13.1 Storage Siting, Security & Facility Requirements 13.2 Containment, Temperature Control & Storage Organisation 13.3 Transporting Pesticides Safely 13.4 DOT Placarding, Shipping Papers & Hazmat Rules 13.5 Container Rinsing & Waste Disposal 13.6 Spill Response: Control, Contain, Clean Up & OERS
6.3 Types of Control Methods
Key Takeaways Explain This Topic AI
Regulatory control is government-enforced quarantine, inspection and certification, such as Oregon's Japanese beetle and emerald ash borer quarantines.
Cultural control changes the production practice — crop rotation, sanitation, planting date, resistant varieties — to break the pest's life cycle.
Mechanical and physical control uses barriers, traps, tillage, exclusion netting, heat or cold to remove or block the pest.
Classical biological control imports and releases a co-evolved natural enemy from the pest's home range for permanent landscape-level suppression.
Broad-spectrum chemistry that eliminates natural enemies causes secondary pest outbreaks and target pest resurgence, which selective chemistry avoids.
Last updated: August 2026
Types of Control Methods
Why this matters: "Types of control methods" is an explicit leaf of the IPM domain, and exam items almost always present a practice and ask you to name the category. Learn the five categories by the mechanism, not by the example.
1. The Five Control Categories (Tactics) in IPM
IPM organizes management strategies into five distinct categories, arranged hierarchically to emphasize preventive, non-chemical methods before chemical deployment. ┌────────────────────────────────────────────────────────────────────────┐
- │ THE 5 IPM CONTROL CATEGORIES │
- │ │
- │ 1. REGULATORY CONTROL (Quarantines, Inspections, Clean Seed) │
- │ 2. CULTURAL CONTROL (Crop Rotation, Sanitation, Irrigation, Soil)│
- │ 3. PHYSICAL / MECHANICAL (Exclusion Netting, Tillage, Mowing, Traps) │
- │ 4. BIOLOGICAL CONTROL (Predators, Parasitoids, Pathogens) │
- │ 5. CHEMICAL CONTROL (Selective Insecticides, Herbicides, etc.) │
- └────────────────────────────────────────────────────────────────────────┘
- Detailed Analysis of the Five Control Tactics
Control Category Core Operational Mechanism Practical Pacific Northwest / Oregon Field Examples
1. Regulatory Control Government-enforced legal quarantines, phytosanitary border inspections, nursery stock certifications, and mandatory eradication orders to prevent the introduction or geographic spread of invasive, high-consequence pests. • ODA Japanese Beetle Quarantine: Quarantining and inspecting uncertified nursery stock and soil root balls shipped into Oregon from eastern states.; • Oregon Noxious Weed Seed Laws: Zero tolerance for prohibited weed seeds (dodder, tansy ragwort, field bindweed) in certified grass seed lots.; • Emerald Ash Borer (EAB) Quarantine: Restricting the transport of ash firewood, green lumber, and nursery stock out of infested Oregon counties (e.g., Washington County).
2. Cultural Control Modifying standard agronomic practices, growing environments, or host plant vigor to make the habitat inhospitable to pests or disrupt their developmental life cycles. • Crop Rotation: Alternating grass seed fields with broadleaf red clover to break soilborne fungal pathogen ( Rhizoctonia ) and nematode cycles.; • Sanitation: Flail-mowing fallen orchard leaves in late autumn to accelerate decomposition and destroy overwintering apple scab ( Venturia inaequalis ) ascospores.; • Irrigation Management: Converting from overhead sprinklers to drip irrigation in vineyards to eliminate foliar leaf wetness required by Botrytis gray mold.; • Genetically Resistant Cultivars: Planting phylloxera-resistant grape rootstocks or rust-resistant wheat varieties ( Stripe Rust resistance).
3. Physical & Mechanical Control Direct physical removal, exclusion barriers, mechanical destruction, or environmental manipulation (temperature, humidity, light) that kills or blocks pests. • Exclusion Netting: Installing fine mesh netting around commercial caneberries and sweet cherries to physically exclude Spotted Wing Drosophila ( Drosophila suzukii ).; • Tillage & Cultivation: Disking row middles to uproot annual weed seedlings and expose subterranean cutworms to desiccation and bird predation.; • Mowing & Flaming: Regular mowing of orchard floor covers to suppress weed seed heads; propane flaming for weed control in organic onions.; • Temperature Extremes: Cold storage ( 32 ∘ F 32^\circ\text{F} 3 2 ∘ F ) of harvested apples to arrest codling moth development; steam pasteurization of greenhouse soil.
4. Biological Control Utilizing living organisms— natural enemies (predators, parasitoids, and pathogens)—to suppress pest populations below damaging threshold levels. (See Section 5 for detailed classification of Classical, Augmentation, and Conservation Biocontrol).
5. Chemical Control Deploying synthetic or naturally derived chemical active ingredients (insecticides, fungicides, herbicides, miticides, rodenticides) that kill, repel, or disrupt pest physiology. Applied strictly as a targeted, threshold-driven tool when non-chemical methods prove insufficient. Applicators must select selective chemistries, calibrate precisely, and rotate Mode of Action (MOA) groups.
2. Biological Control: Agents & Strategies
Biological control harnesses natural ecological interactions to suppress pest populations. Biological control agents belong to three functional categories: ┌────────────────────────────────────────────────────────────────────────┐
- │ THE 3 TYPES OF NATURAL ENEMIES │
- │ │
- │ 1. PREDATORS: │
- │ • Free-living organisms that consume many individual prey over │
- │ their lifetime. │
- │ • Examples: Convergent lady beetles (consume aphids), green │
- │ lacewing larvae ("aphid lions"), predatory phytoseiid mites │
- │ (*Typhlodromus occidentalis*), syrphid fly larvae, spiders. │
- │ │
- │ 2. PARASITOIDS: │
- │ • Specialized insects (mostly tiny solitary wasps and tachinid │
- │ flies) whose immature stage develops inside or on a SINGLE host │
- │ insect, inevitably killing it upon completing development. │
- │ • Examples: *Trichogramma* wasps (parasitize moth eggs), *Aphelinus│
- │ mali* (parasitizes woolly apple aphids), *Encarsia formosa* │
- │ (parasitizes greenhouse whiteflies). │
- │ │
- │ 3. PATHOGENS (Entomopathogens / Microbials): │
- │ • Microorganisms that infect and cause fatal disease in pests. │
- │ • Examples: *Bacillus thuringiensis* (Bt - crystalline gut toxin), │
- │ *Beauveria bassiana* (entomopathogenic fungus), Baculoviruses │
- │ (Granulovirus targeting codling moth larvae). │
- └────────────────────────────────────────────────────────────────────────┘
- The Three Fundamental Biological Control Strategies
Biocontrol Strategy Core Scientific Definition Operational Deployment & Oregon Case Studies
1. Classical (Importation) Biological Control Locating, importing, testing, and releasing a specialized natural enemy from the native home range of an exotic, invasive pest that arrived without its natural predators. • Goal: Permanent, self-sustaining, landscape-level pest suppression.; • Oregon Case Study: Releasing the Cinnabar Moth ( Tyria jacobaeae ) and Tansy Flea Beetle ( Longitarsus jacobaeae ) from Europe to control invasive Tansy Ragwort in western Oregon pastures, saving livestock producers millions of dollars.; • Samurai Wasp ( Trissolcus japonicus ): Released to parasitize eggs of the invasive Brown Marmorated Stink Bug.
2. Augmentative Biological Control Releasing mass-reared commercial natural enemies into an agricultural or greenhouse system where resident natural enemies are absent or insufficient. • Inoculative Release: Releasing small numbers of natural enemies early in the season to allow them to reproduce and build up long-term suppression ( Encarsia formosa in greenhouse tomatoes).; • Inundative Release: Flooding a crop with massive numbers of "living biopesticides" for immediate, rapid pest knockdown ( Phytoseiulus persimilis predatory mites released in commercial strawberry fields).
3. Conservation Biological Control Modifying the local habitat and management practices to protect, attract, feed, and sustain existing native natural enemies and wild pollinators. • Insectary Plantings: Planting flowering perennial hedgerows (sweet alyssum, buckwheat) to supply nectar and pollen to adult parasitoid wasps and hoverflies.; • Beetle Banks: Establishing undisturbed grassy ridges within fields to provide overwintering shelter for predatory carabid ground beetles.; • Pesticide Selectivity: Eliminating broad-spectrum organophosphate and pyrethroid sprays that decimate beneficial predator populations.
3. Selective vs. Non-Selective Chemistry & Ecological Disruptions
When chemical intervention is required, product selection is critical to maintaining biological balance. ┌────────────────────────────────────────────────────────────────────────┐
- │ SELECTIVE VS. NON-SELECTIVE (BROAD-SPECTRUM) │
- │ │
- │ SELECTIVE PESTICIDES: │
- │ • Specifically target a narrow taxonomic group, single pest genus, │
- │ or unique physiological pathway. │
- │ • Poses minimal toxicity to non-target predators, parasitoids, and │
- │ foraging honey bees. │
- │ • Examples: *Bacillus thuringiensis* (Bt - toxic only to caterpillars),│
- │ 2,4-D (herbicidal only to broadleaf plants), Flonicamid / │
- │ Pymetrozine (selective aphid feeding blockers). │
- │ │
- │ NON-SELECTIVE (BROAD-SPECTRUM) PESTICIDES: │
- │ • Kills a wide array of organisms across multiple insect families or │
- │ plant classes indiscriminately. │
- │ • Decimates beneficial predators, parasitoids, and pollinators. │
- │ • Examples: Synthetic Pyrethroids (bifenthrin, permethrin), │
- │ Organophosphates (malathion, chlorpyrifos), Glyphosate (kills all │
- │ green foliar vegetation). │
- └────────────────────────────────────────────────────────────────────────┘
- Ecological Cascades of Broad-Spectrum Disruptions
Secondary Pest Outbreaks: Occurs when a broad-spectrum chemical application successfully suppresses the target key pest but simultaneously eradicates all natural enemies of a minor, non-damaging organism. Freed from predatory control, this secondary organism explodes into a catastrophic primary pest infestation.
Classic Oregon Orchard Scenario: A pear grower sprays a broad-spectrum pyrethroid to control codling moth. The pyrethroid wipes out beneficial predatory mites ( Typhlodromus occidentalis ). Within three weeks, Two-Spotted Spider Mite populations explode exponentially, bronzing foliage and requiring an expensive emergency miticide application.
Target Pest Resurgence: Occurs when a broad-spectrum chemical application knocks down the target pest population temporarily, but completely exterminates all resident predators and parasitoids. The surviving target pests (or incoming migrants from adjacent fields) rebound exponentially faster than the predator population because their food supply is abundant and their biological controls are gone.