Study guide

7.1 Legal Status of the Label, Its Anatomy & Its Numbers

Oregon Pesticide Applicator Laws & Safety Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Federal Pesticide Law, FIFRA & the Worker Protection Standard

1.1 FIFRA, EPA Authority & "The Label Is the Law" 1.2 Registration Pathways: Sections 3, 18, 24(c) & 25(b) 1.3 Restricted-Use vs. General-Use Pesticides 1.4 WPS: Covered Establishments, Notification & Training 1.5 Application Exclusion Zones, REIs & Early Entry 1.6 WPS: Decontamination & Emergency Medical Assistance 1.7 Other Federal Laws: FFDCA, ESA, OSHA/HCS & the Clean Water Act

2 Chapter 2: The Oregon Pesticide Control Act, ODA & State Agencies

2.1 ORS Chapter 634, OAR 603-057 & the Oregon Agency Map 2.2 ODA Authority, Investigations & Oregon Product Registration 2.3 Oregon Chemical-Specific Rules That Override the Label 2.4 Buffers, Forest Notification, Watershed Programs & Co-Existence

3 Chapter 3: Oregon Licensing, Certification & Recertification

3.1 Oregon Pesticide Licence Types 3.2 Licence Categories & When Oregon Requires a Licence 3.3 Certification Periods, Exams & Recertification Credits

4 Chapter 4: Oregon Recordkeeping, Prohibited Acts & Enforcement

4.1 Oregon Pesticide Application Records 4.2 Dealer, Private-Applicator, WPS & School Records 4.3 Prohibited Acts, Inspections & Penalties

5 Chapter 5: Pest Biology & Identification

5.1 Insect Anatomy, Metamorphosis & Mouthparts 5.2 Weeds, Plant Diseases & Non-Insect Pests 5.3 Vertebrate & Mollusk Pests, Scouting & Degree-Days

6 Chapter 6: Integrated Pest Management & Resistance Management

6.1 IPM Definition, Principles & Advantages 6.2 Economic Threshold & Economic Injury Level 6.3 Types of Control Methods 6.4 Pesticide Resistance & Mode-of-Action Rotation

7 Chapter 7: Pesticide Labeling & Safety Data Sheets

7.1 Legal Status of the Label, Its Anatomy & Its Numbers 7.2 Signal Words, Toxicity Categories & First Aid Statements 7.3 Directions for Use, Rates, REI & PHI 7.4 Environmental Hazards, Storage & Disposal, and Label Language 7.5 Safety Data Sheets & Complex Label Interpretation

8 Chapter 8: Pesticide Formulations, Adjuvants & Tank Mixing

8.1 Liquid Pesticide Formulations (EC, SC, SL, ME, ULV) 8.2 Dry and Specialty Formulations (WP, WDG, G, Baits & Fumigants) 8.3 Adjuvants, Surfactants & Spray Water Quality 8.4 Compatibility, the Jar Test & Tank-Mixing Sequence

9 Chapter 9: Toxicology, Exposure, First Aid & Reporting

9.1 Toxicity, Hazard & the Dose-Response Relationship 9.2 LD50, LC50, Toxicity Categories & Acute vs. Chronic Effects 9.3 Routes of Exposure & Absorption 9.4 Chemical Families, Signs & Symptoms of Poisoning 9.5 Emergency First Aid, Antidotes & Cholinesterase Monitoring 9.6 Oregon Incident Reporting & Emergency Contacts

10 Chapter 10: Personal Protective Equipment

10.1 PPE Selection, Chemical Resistance & the EPA Category Chart 10.2 PPE Components, Donning, Doffing & Care 10.3 Respirator Types, Filters & Cartridges 10.4 Fit Testing, Medical Evaluation & Cartridge Change-Out

11 Chapter 11: Pesticides in the Environment & Drift Management

11.1 Environmental Fate, Persistence & Degradation 11.2 Leaching, Runoff & Protecting Ground and Surface Water 11.3 Oregon Water Quality Programs 11.4 Drift Management: Particle Drift, Vapour Drift & Meteorology 11.5 Non-Target Safety: Pollinators, Wildlife & Endangered Species

12 Chapter 12: Application Equipment & Calibration

12.1 Sprayer Types, Components & Plumbing 12.2 Nozzles, Droplet Size & Sprayer Maintenance 12.3 Sprayer Calibration Principles, Formulas & Field Methods 12.4 Mixing, Loading & Pesticide Mathematics

13 Chapter 13: Storage, Transport, Disposal & Spill Response

13.1 Storage Siting, Security & Facility Requirements 13.2 Containment, Temperature Control & Storage Organisation 13.3 Transporting Pesticides Safely 13.4 DOT Placarding, Shipping Papers & Hazmat Rules 13.5 Container Rinsing & Waste Disposal 13.6 Spill Response: Control, Contain, Clean Up & OERS

7.1 Legal Status of the Label, Its Anatomy & Its Numbers

Key Takeaways Explain This Topic AI

The pesticide label is a legally enforceable document; using a pesticide inconsistent with its labelling violates FIFRA and ORS 634.372(2).

The ingredient statement gives each active ingredient by common or chemical name with percentage by weight, plus the total percentage of other ingredients.

A brand name identifies the marketed product, the common name identifies the active ingredient, and the chemical name is its full structural designation.

The EPA registration number identifies the product; a three-part number identifies a distributor or supplemental registration.

The EPA establishment number identifies the facility that produced, formulated or repackaged the product, not the product itself.

Last updated: August 2026

Legal Status of the Label, Its Anatomy & Its Numbers

Why this matters: Domain 1 of the exam outline opens with "the label is the law" and then asks you to recognise the parts of the label. This section covers both, including the ingredient statement and the registration and establishment numbers that identify what you are holding.

1. Legal Status of Pesticide Labeling: "The Label is the Law"

The pesticide label represents a binding legal contract between the U.S. Environmental Protection Agency (EPA), the chemical registrant (manufacturer), and the certified applicator. Before a pesticide formulation receives federal registration under Section 3 of the Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA), the manufacturer must invest millions of dollars and years of toxicological, environmental fate, residual, and efficacy testing. The EPA reviews this scientific data and approves every word, symbol, graphic, and instruction printed on the label. +-----------------------------------------------------------------------------------------+

  • | LEGAL DEFINITIONS UNDER FIFRA |
  • +-----------------------------------------------------------------------------------------+
  • | 1. THE LABEL: |
  • | Written, printed, or graphic matter attached to, or inscribed directly upon, |
  • | the immediate pesticide container, package, or outer shipping wrapper. |
  • | |
  • | 2. THE LABELING: |
  • | The label PLUS all other written, printed, or graphic matter that accompanies the |
  • | pesticide at any time, or is referenced on the label. This includes: |
  • | * Supplemental labels (e.g., Section 24(c) Special Local Need registrations) |
  • | * Technical leaflets, product bulletins, and crop-specific brochures |
  • | * Web-referenced mandates (e.g., EPA Bulletins Live! Two Endangered Species system) |
  • | * Worker Protection Standard (WPS) safety guides and chemigation manuals |
  • +-----------------------------------------------------------------------------------------+
  • Federal and State Statutory Authority

Federal Law — FIFRA Section 12(a)(2)(G): Expressly states that it is a violation of federal law for any person "to use any registered pesticide in a manner inconsistent with its labeling." The term use encompasses every phase of chemical handling: transporting, unloader handling, storing, mixing, loading, calibrating equipment, applying, cleaning spray rigs, and disposing of empty containers and rinsate.

Oregon State Law — ORS 634.372(2): The Oregon Department of Agriculture (ODA) enforces state pesticide statutes. Under ORS 634.372(2), it is an unlawful act to "as an applicator or operator, apply any pesticide in a manner inconsistent with its labeling." ODA pesticide investigators inspect application sites, audit spray logs, and issue civil penalties or license suspensions for label violations such as off-target drift, exceeding maximum application rates, treating unlisted crops, or failing to wear mandated Personal Protective Equipment (PPE).

2. Anatomy of a Pesticide Container Label

Pesticide container labels follow a standardized layout established by EPA regulations under Title 40 of the Code of Federal Regulations (40 CFR Part 156). Applicators must systematically review every label section prior to purchase, transport, storage, mixing, application, and disposal.

Label Component Physical Location Legal & Operational Function

Restricted Use Box Top of front panel (bold border) Identifies Restricted Use Pesticides (RUP), states specific hazard rationale, and limits sale/use to certified applicators

Brand / Trade Name Front panel (prominent display) Commercial marketing name registered by the chemical manufacturer

Ingredient Statement Front panel Discloses the percentage by weight (% w/w) of active ingredients and aggregate inert ingredients

Common & Chemical Names Ingredient statement Discloses standardized generic name (ANSI/ISO) and structural scientific name (IUPAC/CAS)

EPA Registration Number Front or back panel EPA product tracking code: Company Number - Product Number - (Distributor Number)

EPA Establishment Number Front panel or container Identifies the physical manufacturing, formulating, or packaging facility where the chemical was produced

Signal Word & Child Warning Front panel (prominent) Indicates acute toxicity tier and displays mandatory statement: KEEP OUT OF REACH OF CHILDREN

First Aid (Statement of Practical Treatment) Front panel or adjacent panel Immediate emergency medical instructions organized by exposure route (oral, dermal, inhalation, ocular)

Precautionary Statements Front / inside panel Details human and domestic animal hazards, route-specific risks, handler PPE, and environmental hazards

Directions for Use Main body / foldout booklet Legally binding operational instructions: approved crops/sites, target pests, dosage rates, PHI, REI, and equipment bans

Storage and Disposal Concluding label section Legally mandated storage temperatures, spill containment, mandatory triple-rinsing rules, and container disposal protocols

3. Product Nomenclature: Brand, Common, and Chemical Names

Every pesticide active ingredient is described by three distinct levels of chemical nomenclature. Certified applicators must never rely solely on trade or brand names when selecting chemicals, planning tank mixes, avoiding rotational crop injury, or implementing resistance management programs. +-----------------------------------------------------------------------------------------+

  • | PESTICIDE NOMENCLATURE HIERARCHY |
  • +-----------------------------------------------------------------------------------------+
  • | 1. BRAND / TRADE NAME: |
  • | Commercial trademarked marketing name created by the manufacturer. |
  • | Examples: Roundup PROMAX®, Daconil 2787®, Warrior II®, Garlon 3A® |
  • | |
  • | 2. COMMON NAME: |
  • | Standardized generic chemical name assigned by ANSI (American National Standards |
  • | Institute) or ISO (International Organization for Standardization). |
  • | Examples: glyphosate, chlorothalonil, lambda-cyhalothrin, triclopyr |
  • | |
  • | 3. CHEMICAL NAME: |
  • | Formal, complex structural scientific name assigned by IUPAC (International Union of |
  • | Pure and Applied Chemistry) or CAS (Chemical Abstracts Service). |
  • | Example: N-(phosphonomethyl)glycine |
  • +-----------------------------------------------------------------------------------------+
  • Why the Common Name is Essential for Certified Applicators

Multiple Brands for One Active Ingredient: A single active ingredient is frequently formulated and sold by dozens of chemical companies under completely different brand names. For example, glyphosate is sold as Roundup®, Rodeo®, Accord®, Touchdown®, and Mirage®.

Deceptive Brand Similarities: Manufacturers often market multiple chemically distinct products under similar brand names (e.g., "BrandName Pro" containing an organophosphate insecticide versus "BrandName Plus" containing a synthetic pyrethroid). Applicators who rely solely on brand names risk applying the wrong chemical class, resulting in crop destruction, severe drift, or unlawful food residues.

Pest Resistance Mitigation: To prevent target weed, fungal, or insect resistance, applicators must rotate chemical Modes of Action (MOA) (e.g., rotating WSSA/HRAC herbicide groups or IRAC insecticide groups). Rotating between two different brand names that share the exact same active ingredient common name provides zero resistance management and accelerates pest resistance.

Brand / Trade Name Common Name (Active Ingredient) Chemical Name (IUPAC / CAS Structure) Primary Pesticide Class & Target

Roundup PROMAX® Glyphosate N -(phosphonomethyl)glycine Non-selective systemic herbicide (Group 9 EPSP inhibitor)

Daconil 2787® Chlorothalonil 2,4,5,6-tetrachloroisophthalonitrile Broad-spectrum multi-site contact fungicide (Group M05)

Warrior II® Lambda-cyhalothrin [1α(S*),3α(Z)]-(±)-cyano(3-phenoxyphenyl)methyl 3-(2-chloro-3,3,3-trifluoroprop-1-enyl)-2,2-dimethylcyclopropanecarboxylate Synthetic pyrethroid insecticide (Group 3A sodium channel modulator)

Garlon 3A® Triclopyr triethylamine salt 3,5,6-trichloro-2-pyridinyloxyacetic acid, triethylamine salt Selective post-emergence synthetic auxin herbicide (Group 4)

Admire Pro® Imidacloprid 1-[(6-chloro-3-pyridinyl)methyl]- N -nitro-2-imidazolidinimine Neonicotinoid systemic insecticide (Group 4A nAChR agonist)

4. Ingredient Statements: Active Ingredients vs. Inert Ingredients

Federal law requires every pesticide label to display an Ingredient Statement on the front panel disclosing the percentage composition of the product by weight: Active Ingredients (% w/w) + Other (Inert) Ingredients (% w/w) = 100.0 % \text{Active Ingredients (\% w/w)} + \text{Other (Inert) Ingredients (\% w/w)} = 100.0\% Active Ingredients (% w/w) + Other (Inert) Ingredients (% w/w) = 100.0%

Active Ingredients (a.i.)

The active ingredient is the specific chemical substance responsible for killing, destroying, repelling, mitigating, or controlling the target pest, or acting as a plant regulator, defoliant, or desiccant. The label must clearly state:

The official common name and/or formal chemical name of each active ingredient.

The exact concentration percentage by weight (% w/w).

For liquid formulations, the net active ingredient mass per unit volume (e.g., "Contains 4.0 pounds of active ingredient per U.S. gallon" or "Contains 480 grams a.i. per liter" ). This value is critical for calculating precise chemical tank mixes and complying with maximum annual active ingredient caps.

Inert Ingredients ("Other Ingredients")

Inert ingredients (officially designated as "Other Ingredients" on modern EPA labels) are non-pesticidal components added to the formulation to serve as liquid solvents, dry carriers (clay, talc), emulsifiers, surfactants, wetting agents, anti-foaming agents, stabilizers, or chemical preservatives.

Warning

Critical Legal & Safety Fact: "Inert" Does NOT Mean Harmless or Non-Toxic! The term inert is strictly a regulatory definition meaning the substance does not directly kill the target pest. However, inert ingredients can be highly toxic, corrosive, flammable, or hazardous to humans and the environment. For example, petroleum distillate solvents in Emulsifiable Concentrates (EC) pose severe chemical pneumonia and pulmonary aspiration risks if swallowed, dramatically increase dermal absorption of the active ingredient through human skin, and present high flammability hazards (low flash points). While manufacturers must declare the aggregate percentage of inert ingredients, individual proprietary chemical formulas are protected as commercial trade secrets unless specifically classified as toxic inerts.

5. EPA Registration Numbers vs. EPA Establishment Numbers

Federal regulations mandate two distinct identification numbers on every pesticide package. Applicators must know how to interpret and record these numbers. +-----------------------------------------------------------------------------------------+

  • | EPA IDENTIFICATION NUMBERS |
  • +-----------------------------------------------------------------------------------------+
  • | 1. STANDARD TWO-PART EPA REGISTRATION NUMBER: |
  • | EPA Reg. No. 12345 - 67 |
  • | │ │ |
  • | │ └────── Specific Product Identifier |
  • | └────────────── Primary Registrant / Company Identifier |
  • | |
  • | 2. THREE-PART EPA REGISTRATION NUMBER (DISTRIBUTOR / SUPPLEMENTAL REGISTRATION): |
  • | EPA Reg. No. 12345 - 67 - 8901 |
  • | │ │ │ |
  • | │ │ └─ Distributor / Subregistrant Identifier |
  • | │ └────── Primary Master Product Identifier |
  • | └────────────── Primary Registrant Company Identifier |
  • | |
  • | 3. SPECIAL LOCAL NEED (FIFRA SECTION 24c) REGISTRATION NUMBER: |
  • | EPA SLN No. OR - 240001 |
  • | │ │ |
  • | │ └────────── State Sequence & Approval Number |
  • | └─────────────── Issuing State Code (Oregon) |
  • | |
  • | 4. EPA ESTABLISHMENT NUMBER: |
  • | EPA Est. No. 12345 - OR - 001 |
  • | │ │ │ |
  • | │ │ └─ Specific Factory / Facility Identifier |
  • | │ └────── State of Manufacture (Oregon) |
  • | └────────────── Manufacturing Company Code |
  • +-----------------------------------------------------------------------------------------+
  • EPA Registration Number (EPA Reg. No.)

The EPA Registration Number indicates that the formulation has undergone complete federal scientific review, toxicological risk assessment, and registration approval by the EPA.

Two-Part Number ( 12345-67 ): The first component ( 12345 ) identifies the chemical company holding the primary master registration. The second component ( 67 ) identifies the specific registered formulation.

Three-Part Number ( 12345-67-8901 ): Indicates a Distributor Registration (supplemental registration). A distributor licenses the master product from the primary registrant to market under a private trade name. The third number ( 8901 ) identifies the distributor firm. Distributor products must possess identical active ingredients, uses, and restrictions as the master product.

Oregon Application Recordkeeping: Under Oregon Administrative Rules ( OAR 603-057 ), certified commercial, public, and private applicators are legally required to record the complete EPA Registration Number on daily pesticide application records.

EPA Establishment Number (EPA Est. No.)

The EPA Establishment Number identifies the physical facility or factory where the chemical was manufactured, blended, formulated, or packaged (e.g., EPA Est. No. 12345-OR-001 ). The two-letter state code identifies the facility location. The establishment number is used during chemical quality audits, batch contamination investigations, and container defect recalls. It is not required on daily Oregon spray application logs.