Study guide
11.2 Leaching, Runoff & Protecting Ground and Surface Water
Oregon Pesticide Applicator Laws & Safety Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Federal Pesticide Law, FIFRA & the Worker Protection Standard
1.1 FIFRA, EPA Authority & "The Label Is the Law" 1.2 Registration Pathways: Sections 3, 18, 24(c) & 25(b) 1.3 Restricted-Use vs. General-Use Pesticides 1.4 WPS: Covered Establishments, Notification & Training 1.5 Application Exclusion Zones, REIs & Early Entry 1.6 WPS: Decontamination & Emergency Medical Assistance 1.7 Other Federal Laws: FFDCA, ESA, OSHA/HCS & the Clean Water Act
2 Chapter 2: The Oregon Pesticide Control Act, ODA & State Agencies
2.1 ORS Chapter 634, OAR 603-057 & the Oregon Agency Map 2.2 ODA Authority, Investigations & Oregon Product Registration 2.3 Oregon Chemical-Specific Rules That Override the Label 2.4 Buffers, Forest Notification, Watershed Programs & Co-Existence
3 Chapter 3: Oregon Licensing, Certification & Recertification
3.1 Oregon Pesticide Licence Types 3.2 Licence Categories & When Oregon Requires a Licence 3.3 Certification Periods, Exams & Recertification Credits
4 Chapter 4: Oregon Recordkeeping, Prohibited Acts & Enforcement
4.1 Oregon Pesticide Application Records 4.2 Dealer, Private-Applicator, WPS & School Records 4.3 Prohibited Acts, Inspections & Penalties
5 Chapter 5: Pest Biology & Identification
5.1 Insect Anatomy, Metamorphosis & Mouthparts 5.2 Weeds, Plant Diseases & Non-Insect Pests 5.3 Vertebrate & Mollusk Pests, Scouting & Degree-Days
6 Chapter 6: Integrated Pest Management & Resistance Management
6.1 IPM Definition, Principles & Advantages 6.2 Economic Threshold & Economic Injury Level 6.3 Types of Control Methods 6.4 Pesticide Resistance & Mode-of-Action Rotation
7 Chapter 7: Pesticide Labeling & Safety Data Sheets
7.1 Legal Status of the Label, Its Anatomy & Its Numbers 7.2 Signal Words, Toxicity Categories & First Aid Statements 7.3 Directions for Use, Rates, REI & PHI 7.4 Environmental Hazards, Storage & Disposal, and Label Language 7.5 Safety Data Sheets & Complex Label Interpretation
8 Chapter 8: Pesticide Formulations, Adjuvants & Tank Mixing
8.1 Liquid Pesticide Formulations (EC, SC, SL, ME, ULV) 8.2 Dry and Specialty Formulations (WP, WDG, G, Baits & Fumigants) 8.3 Adjuvants, Surfactants & Spray Water Quality 8.4 Compatibility, the Jar Test & Tank-Mixing Sequence
9 Chapter 9: Toxicology, Exposure, First Aid & Reporting
9.1 Toxicity, Hazard & the Dose-Response Relationship 9.2 LD50, LC50, Toxicity Categories & Acute vs. Chronic Effects 9.3 Routes of Exposure & Absorption 9.4 Chemical Families, Signs & Symptoms of Poisoning 9.5 Emergency First Aid, Antidotes & Cholinesterase Monitoring 9.6 Oregon Incident Reporting & Emergency Contacts
10 Chapter 10: Personal Protective Equipment
10.1 PPE Selection, Chemical Resistance & the EPA Category Chart 10.2 PPE Components, Donning, Doffing & Care 10.3 Respirator Types, Filters & Cartridges 10.4 Fit Testing, Medical Evaluation & Cartridge Change-Out
11 Chapter 11: Pesticides in the Environment & Drift Management
11.1 Environmental Fate, Persistence & Degradation 11.2 Leaching, Runoff & Protecting Ground and Surface Water 11.3 Oregon Water Quality Programs 11.4 Drift Management: Particle Drift, Vapour Drift & Meteorology 11.5 Non-Target Safety: Pollinators, Wildlife & Endangered Species
12 Chapter 12: Application Equipment & Calibration
12.1 Sprayer Types, Components & Plumbing 12.2 Nozzles, Droplet Size & Sprayer Maintenance 12.3 Sprayer Calibration Principles, Formulas & Field Methods 12.4 Mixing, Loading & Pesticide Mathematics
13 Chapter 13: Storage, Transport, Disposal & Spill Response
13.1 Storage Siting, Security & Facility Requirements 13.2 Containment, Temperature Control & Storage Organisation 13.3 Transporting Pesticides Safely 13.4 DOT Placarding, Shipping Papers & Hazmat Rules 13.5 Container Rinsing & Waste Disposal 13.6 Spill Response: Control, Contain, Clean Up & OERS
11.2 Leaching, Runoff & Protecting Ground and Surface Water
Key Takeaways Explain This Topic AI
Leaching moves dissolved pesticide downward through the soil profile; runoff moves it laterally in water or attached to eroded soil particles.
A shallow water table, coarse soil, low organic matter and heavy irrigation or rainfall together create the highest leaching risk.
Mixing and loading are the highest-risk operations for point-source contamination, because they concentrate product in one spot repeatedly.
Mix, load and rinse well away from wells, springs, sinkholes and surface water, or on an impermeable pad with a containment sump.
Any chemigation system must have functional anti-backflow protection so that tank contents cannot siphon back into the water source.
Last updated: August 2026
Leaching, Runoff & Protecting Ground and Surface Water
Why this matters: "Groundwater contamination", "pesticide transport in the environment" and "soil types" are three consecutive leaves of Domain 7. This section connects them to the engineering controls that actually keep pesticide out of the well.
1. Hydrological Transport Dynamics: Groundwater Leaching vs. Surface Runoff ┌────────────────────────────────────────────────────────────────────────┐
- │ PESTICIDE HYDROLOGICAL TRANSPORT │
- │ │
- │ PRECIPITATION / IRRIGATION │
- │ │ │
- │ ├─────────────────────────────────┐ │
- │ ▼ ▼ │
- │ [OVERLAND SURFACE RUNOFF] [SOIL INFILTRATION] │
- │ • Dissolved Phase (High Sw) │ │
- │ • Sediment-Bound Phase (High Koc) ├───────────────────┐ │
- │ │ ▼ ▼ │
- │ ▼ [MATRIX FLOW] [MACROPORE FLOW] │
- │ [SURFACE WATERWAYS] (Slow percolation) (Pores, cracks) │
- │ (Streams, Rivers, Estuaries, │ │ │
- │ Wetlands, Irrigation Canals) └─────────┬─────────┘ │
- │ ▼ │
- │ [UNCONFINED AQUIFER] │
- │ (Groundwater Wellheads) │
- └────────────────────────────────────────────────────────────────────────┘
- 1. Groundwater Leaching Dynamics & The GUS Index
Leaching is the downward movement of dissolved pesticide active ingredients through the soil profile (vadose zone) driven by percolating water, culminating in the contamination of underlying groundwater aquifers.
The GUS Index (Groundwater Ubiquity Score): Developed by Gustafson, the GUS index integrates soil persistence and sorption into a single predictive vulnerability score: GUS = log 10 ( t 1 / 2 ) × ( 4 − log 10 ( K o c ) ) \text{GUS} = \log_{10}(t_{1/2}) \times \left(4 - \log_{10}(K_{oc})\right) GUS = lo g 10 ( t 1/2 ) × ( 4 − lo g 10 ( K oc ) )
GUS > 2.8 > 2.8 > 2.8 (High Leacher): e.g., Picloram, Clopyralid, Atrazine, Hexazinone. Extreme groundwater threat.
GUS 1.8 – 2.8 1.8\text{--}2.8 1.8 – 2.8 (Transition Zone / Moderate Leacher): e.g., Metolachlor, Imidacloprid. Moderate leaching threat depending on site soil texture.
GUS < 1.8 < 1.8 < 1.8 (Non-Leacher): e.g., Chlorpyrifos, Glyphosate, Permethrin. Negligible groundwater leaching risk.
2. Soil Characteristics & Geologic Vulnerability Factors
Hydrogeologic site conditions dictate whether a mobile pesticide will reach groundwater:
Soil Texture:
Coarse Sands & Gravels: Large pore spaces, low specific surface area, rapid hydraulic conductivity ( > 5 in/hr > 5\ \text{in/hr} > 5 in/hr ). Water percolates in hours, offering virtually zero chemical retention.
Clays & Silt Loams: Microscopic pore networks, enormous surface area, high cation exchange capacity (CEC), slow permeability ( < 0.2 in/hr < 0.2\ \text{in/hr} < 0.2 in/hr ). Retains water and chemicals in the root zone where microbial degradation occurs.
Organic Matter Content: Soils with > 3 – 5 % > 3\text{--}5\% > 3 – 5% organic matter provide abundant adsorption binding sites. Coarse soils with < 1 % < 1\% < 1% organic matter present severe leaching risks.
Depth to Groundwater: Shallow unconfined water tables ( < 10 – 20 feet < 10\text{--}20\ \text{feet} < 10 – 20 feet ) provide minimal vadose zone travel time, allowing mobile chemicals to enter drinking aquifers without sufficient time for degradation.
Geologic Features: Fractured basalt, karst limestone formations, and gravelly alluvium provide direct conduits from surface soils into deep aquifers.
3. Macropore Flow & Preferential Channeling
Traditional soil transport models assumed uniform, homogenous water movement through the soil matrix (piston flow). However, extensive field research demonstrates that preferential macropore flow is a major driver of groundwater contamination:
Macropores are continuous structural voids created by:
Deep earthworm burrows ( Lumbricus terrestris vertical channels).
Decayed taproots from previous crops or cover crops.
Desiccation cracks and fissures in heavy swelling smectite/vertisol clays.
Inter-aggregate structural fractures.
The Macropore Threat: During heavy rain or overhead irrigation, water bypasses the biologically active topsoil matrix, channeling dissolved pesticides directly down deep structural fissures at velocities up to 100 times faster than matrix percolation, transporting even moderately adsorbed chemicals to the water table within hours.
4. Surface Runoff & Soil Erosion Mechanics
Runoff is the lateral overland movement of water and suspended solids across the land surface when precipitation or irrigation exceeds the soil infiltration capacity:
Dissolved Phase Transport: Chemicals with high water solubility ( S w > 100 mg/L S_w > 100\ \text{mg/L} S w > 100 mg/L ) and low K o c K_{oc} K oc dissolve into the thin overland sheet of moving water, transporting in solution into surface drainage ditches, streams, and ponds.
Sediment-Bound Particulate Transport: Hydrophobic chemicals with high K o c K_{oc} K oc ( > 1 , 000 mL/g > 1,000\ \text{mL/g} > 1 , 000 mL/g ) adsorb tightly to fine silt, clay, and organic matter particles. During sheet, rill, or gully erosion, physical water force detaches and carries the topsoil particles with attached pesticide molecules into surface waterways.
Topographic Factors: Steep slopes ( > 5 % > 5\% > 5% ), long uninterrupted slope lengths, compacted soil surfaces, wheel tracks, and absence of vegetative cover drastically amplify runoff volume and sediment yield.
2. Agricultural Water Quality Protection & Engineering Controls
Protecting Oregon's water resources requires rigorous on-farm engineering controls, spatial isolation, and certified hardware installations. ┌────────────────────────────────────────────────────────────────────────┐
- │ WELLHEAD & WATERWAY PROTECTION ARCHITECTURE │
- │ │
- │ [DRINKING / IRRIGATION WELL] ◄─── MINIMUM 100-FT SETBACK BUFFER ───► │
- │ • Cased, capped, grouted wellhead │
- │ • Bermed, impermeable mixing pad │
- │ • Air gap or Reduced Pressure Zone backflow preventer │
- │ │
- │ [SPRAY APPLICATION FIELD] │
- │ • Vegetative Filter Strip (VFS) along downslope border (≥ 25-50 ft) │
- │ • Grassed waterways in concentrated flow channels │
- │ • Riparian forest buffer along fish-bearing streams │
- │ │
- │ [CHEMIGATION SYSTEM] │
- │ • Reduced Pressure Principle Backflow Preventer (RPBP) │
- │ • Automatic low-pressure drain port │
- │ • Vacuum relief valve & check valve interlock │
- └────────────────────────────────────────────────────────────────────────┘
- 1. Wellhead Protection Standards & Setback Buffers
Domestic drinking wells and agricultural irrigation wells represent direct vertical pipes into groundwater aquifers.
The 100-Foot Setback Guideline: The National Core Manual advises keeping mixing, loading, calibration and equipment cleaning at least 100 feet from any wellhead, spring, sinkhole or surface water body, unless the work is done on an impermeable, contained mixing/loading pad with a secondary containment sump. Some product labels convert that guidance into an enforceable setback — read the label, because where the label states a distance, that distance is the law.
Physical Well Protection: Well casings must extend at least 12 inches above grade, be sealed with a sanitary well cap, and have a sound surface concrete pad and bentonite grout seal to prevent surface runoff from channeling down the outside of the well casing.
2. Chemigation Backflow Prevention Systems & Safety Hardware
Chemigation is the practice of injecting agricultural chemicals (pesticides, fertilizers) directly into an irrigation system (center pivot, drip, solid set sprinklers). Under federal pesticide labelling requirements for chemigation, every chemigation system connected to a groundwater well or public water supply must be equipped with functional, certified backflow prevention hardware : ┌────────────────────────────────────────────────────────────────────────┐
- │ MANDATORY CHEMIGATION SAFETY HARDWARE │
- │ │
- │ 1. REDUCED PRESSURE PRINCIPLE BACKFLOW PREVENTER (RPBP) / CHECK VALVE:│
- │ • Two independently acting, spring-loaded check valves with an │
- │ intermediate relief valve to prevent back-siphoning of chemical. │
- │ │
- │ 2. AUTOMATIC LOW-PRESSURE DRAIN: │
- │ • Positioned on the main irrigation line upstream of the check │
- │ valve to drain any chemical leakage away from the wellhead. │
- │ │
- │ 3. VACUUM RELIEF VALVE: │
- │ • Prevents siphon creation in the water pipe when the pump shuts │
- │ down or loses pressure. │
- │ │
- │ 4. POSITIVE-DISPLACEMENT CHEMICAL INJECTION CHECK VALVE: │
- │ • Spring-loaded valve with minimum 10 psi cracking pressure at the │
- │ injection port to prevent irrigation water from surging back │
- │ into the chemical supply tank. │
- │ │
- │ 5. FUNCTIONAL SYSTEM INTERLOCK CONTROLS: │
- │ • Electrical or mechanical interlock ensuring that if the water │
- │ pump stops, the chemical injection pump IMMEDIATELY shuts off. │
- └────────────────────────────────────────────────────────────────────────┘
- 3. Vegetative Filter Strips (VFS) & Riparian Management
Vegetative Filter Strips (VFS): Dense bands of perennial sod-forming grasses (e.g., tall fescue, orchardgrass) planted downslope of cultivated fields along field borders and stream banks (recommended minimum width 25 to 50 feet ).
Filtration Mechanics: VFS reduces overland runoff velocity, promotes water infiltration, traps up to 80 – 95 % 80\text{--}95\% 80 – 95% of eroded soil particles carrying high- K o c K_{oc} K oc pesticides, and stimulates rhizospheric microbial degradation of dissolved residues.
Grassed Waterways: Shaping and seeding natural field drainage swales with perennial turf prevents rill and gully erosion in areas of concentrated runoff.
Loading diagram... Pesticide Environmental Fate, Soil/Water Transport & Oregon Watershed Protection Architecture