Study guide

13.2 Containment, Temperature Control & Storage Organisation

Oregon Pesticide Applicator Laws & Safety Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Federal Pesticide Law, FIFRA & the Worker Protection Standard

1.1 FIFRA, EPA Authority & "The Label Is the Law" 1.2 Registration Pathways: Sections 3, 18, 24(c) & 25(b) 1.3 Restricted-Use vs. General-Use Pesticides 1.4 WPS: Covered Establishments, Notification & Training 1.5 Application Exclusion Zones, REIs & Early Entry 1.6 WPS: Decontamination & Emergency Medical Assistance 1.7 Other Federal Laws: FFDCA, ESA, OSHA/HCS & the Clean Water Act

2 Chapter 2: The Oregon Pesticide Control Act, ODA & State Agencies

2.1 ORS Chapter 634, OAR 603-057 & the Oregon Agency Map 2.2 ODA Authority, Investigations & Oregon Product Registration 2.3 Oregon Chemical-Specific Rules That Override the Label 2.4 Buffers, Forest Notification, Watershed Programs & Co-Existence

3 Chapter 3: Oregon Licensing, Certification & Recertification

3.1 Oregon Pesticide Licence Types 3.2 Licence Categories & When Oregon Requires a Licence 3.3 Certification Periods, Exams & Recertification Credits

4 Chapter 4: Oregon Recordkeeping, Prohibited Acts & Enforcement

4.1 Oregon Pesticide Application Records 4.2 Dealer, Private-Applicator, WPS & School Records 4.3 Prohibited Acts, Inspections & Penalties

5 Chapter 5: Pest Biology & Identification

5.1 Insect Anatomy, Metamorphosis & Mouthparts 5.2 Weeds, Plant Diseases & Non-Insect Pests 5.3 Vertebrate & Mollusk Pests, Scouting & Degree-Days

6 Chapter 6: Integrated Pest Management & Resistance Management

6.1 IPM Definition, Principles & Advantages 6.2 Economic Threshold & Economic Injury Level 6.3 Types of Control Methods 6.4 Pesticide Resistance & Mode-of-Action Rotation

7 Chapter 7: Pesticide Labeling & Safety Data Sheets

7.1 Legal Status of the Label, Its Anatomy & Its Numbers 7.2 Signal Words, Toxicity Categories & First Aid Statements 7.3 Directions for Use, Rates, REI & PHI 7.4 Environmental Hazards, Storage & Disposal, and Label Language 7.5 Safety Data Sheets & Complex Label Interpretation

8 Chapter 8: Pesticide Formulations, Adjuvants & Tank Mixing

8.1 Liquid Pesticide Formulations (EC, SC, SL, ME, ULV) 8.2 Dry and Specialty Formulations (WP, WDG, G, Baits & Fumigants) 8.3 Adjuvants, Surfactants & Spray Water Quality 8.4 Compatibility, the Jar Test & Tank-Mixing Sequence

9 Chapter 9: Toxicology, Exposure, First Aid & Reporting

9.1 Toxicity, Hazard & the Dose-Response Relationship 9.2 LD50, LC50, Toxicity Categories & Acute vs. Chronic Effects 9.3 Routes of Exposure & Absorption 9.4 Chemical Families, Signs & Symptoms of Poisoning 9.5 Emergency First Aid, Antidotes & Cholinesterase Monitoring 9.6 Oregon Incident Reporting & Emergency Contacts

10 Chapter 10: Personal Protective Equipment

10.1 PPE Selection, Chemical Resistance & the EPA Category Chart 10.2 PPE Components, Donning, Doffing & Care 10.3 Respirator Types, Filters & Cartridges 10.4 Fit Testing, Medical Evaluation & Cartridge Change-Out

11 Chapter 11: Pesticides in the Environment & Drift Management

11.1 Environmental Fate, Persistence & Degradation 11.2 Leaching, Runoff & Protecting Ground and Surface Water 11.3 Oregon Water Quality Programs 11.4 Drift Management: Particle Drift, Vapour Drift & Meteorology 11.5 Non-Target Safety: Pollinators, Wildlife & Endangered Species

12 Chapter 12: Application Equipment & Calibration

12.1 Sprayer Types, Components & Plumbing 12.2 Nozzles, Droplet Size & Sprayer Maintenance 12.3 Sprayer Calibration Principles, Formulas & Field Methods 12.4 Mixing, Loading & Pesticide Mathematics

13 Chapter 13: Storage, Transport, Disposal & Spill Response

13.1 Storage Siting, Security & Facility Requirements 13.2 Containment, Temperature Control & Storage Organisation 13.3 Transporting Pesticides Safely 13.4 DOT Placarding, Shipping Papers & Hazmat Rules 13.5 Container Rinsing & Waste Disposal 13.6 Spill Response: Control, Contain, Clean Up & OERS

13.2 Containment, Temperature Control & Storage Organisation

Key Takeaways Explain This Topic AI

Secondary containment must hold the volume of the largest container plus a margin, with an impermeable, curbed floor and no drains.

Keep the store above freezing and below the label's upper limit; freezing separates emulsions and heat accelerates chemical breakdown.

Mechanical ventilation must exhaust to the outside away from occupied areas and air intakes, not recirculate inside the building.

Store dry formulations above liquids so a leaking liquid container cannot contaminate or activate the dry products beneath.

Segregate herbicides from insecticides and fungicides, keep an up-to-date inventory, and use oldest stock first.

Last updated: August 2026

Containment, Temperature Control & Storage Organisation

Why this matters: A storage building keeps a site safe only if what goes wrong inside it stays inside it. That means secondary containment, temperature and ventilation control, and an arrangement of shelving that prevents a small leak from becoming a mixed-chemical incident.

1. Secondary Containment Engineering & Floor Design

The floor and secondary containment system of a pesticide storage facility represent the primary physical barriers preventing leaking concentrates, ruptured drums, and wash water from penetrating the subsoil and contaminating groundwater. ┌────────────────────────────────────────────────────────────────────────┐

  • │ SECONDARY CONTAINMENT ENGINEERING STANDARDS │
  • │ │
  • │ 1. FLOOR CONSTRUCTION: │
  • │ • Poured reinforced concrete slab, minimum 4 to 6 inches thick, │
  • │ poured over a continuous 10-mil polyethylene vapor barrier. │
  • │ • Cured with a high-density, chemical-resistant sealant: │
  • │ polyurethane, 100% solids epoxy, or novolac epoxy coatings. │
  • │ • Absolutely NO unsealed concrete, asphalt, bare earth, gravel, │
  • │ or wood flooring (porous materials absorb chemicals permanently).│
  • │ │
  • │ 2. CONTINUOUS PERIMETER CURBING / BERMING: │
  • │ • Seamless 4-inch to 6-inch high reinforced concrete curb or berm │
  • │ encircling the entire room perimeter. │
  • │ • Ramped interior drive-over thresholds at vehicle/forklift doors │
  • │ to maintain containment without impeding pallet jacks. │
  • │ │
  • │ 3. CONTAINMENT CAPACITY FORMULA: │
  • │ • The containment basin must hold at minimum 110% to 125% of the │
  • │ capacity of the largest single container stored within the room, │
  • │ OR 25% of the total combined volume of all liquid containers, │
  • │ whichever is greater. │
  • │ │
  • │ 4. PROHIBITION ON EXTERIOR FLOOR DRAINS: │
  • │ • Flooring MUST NOT contain floor drains connected to sewer lines, │
  • │ septic systems, storm sumps, drainage ditches, or soil sumps. │
  • │ • Any internal blind sump must be unperforated, chemically sealed, │
  • │ and pumped out only via dedicated hazardous waste recovery pump. │
  • └────────────────────────────────────────────────────────────────────────┘

Caution

The Critical Ban on Open Floor Drains Connecting a pesticide storage floor drain to a municipal sewer, storm drain, septic tank, or French drain is a direct violation of federal Clean Water Act provisions and Oregon DEQ water quality statutes. In a fire or spill event, an open drain channels thousands of gallons of concentrated poisons directly into public waters or septic leach fields, causing catastrophic environmental devastation and triggering crippling civil and criminal liabilities.

2. Environmental Engineering: Thermal Control (40°F–90°F) & Ventilation Dynamics

Pesticide formulations are complex chemical solutions containing active ingredients, inert organic carriers, surfactants, emulsifiers, stabilizing agents, and anti-foaming compounds. Maintaining strict environmental control within the storage facility is critical to preserving product stability, preventing container structural failure, and eliminating toxic atmospheric concentrations. ┌────────────────────────────────────────────────────────────────────────┐

  • │ TEMPERATURE CONTROL PARAMETERS: 40°F TO 90°F │
  • │ │
  • │ LOWER THERMAL BOUNDARY (< 40°F / 4°C) — FREEZING RISKS: │
  • │ • Liquid formulations (SL, EC, SC, ME) experience phase separation. │
  • │ • Active ingredients crystallize, precipitate, and settle as an │
  • │ insoluble, unmixable sludge on the bottom of the container. │
  • │ • Freezing water-based solutions expand by ~9%, cracking glass jugs, │
  • │ shearing plastic seams, bursting steel drum bungs, and rupturing │
  • │ pumps, valves, and sight gauges. │
  • │ • Emulsifiers break down permanently, causing spray tank nozzle │
  • │ clogging, extreme crop phytotoxicity, or total loss of efficacy. │
  • │ │
  • │ UPPER THERMAL BOUNDARY (> 90°F / 32°C) — HIGH-HEAT RISKS: │
  • │ • Volatile organic solvents vaporize, generating extreme internal │
  • │ container vapor pressure that causes plastic jugs to bloat, twist, │
  • │ and burst, or spray outward upon cap removal. │
  • │ • Flash points of petroleum distillates drop toward ambient levels, │
  • │ massively elevating fire and explosion hazards. │
  • │ • Chemical active ingredients undergo thermal hydrolysis and rapid │
  • │ decomposition, rendering expensive chemicals completely inert. │
  • │ • Highly volatile herbicides (e.g., ester formulations of 2,4-D) │
  • │ outgas vapors that penetrate plastic containers and cross- │
  • │ contaminate neighboring bags of seeds, fertilizers, and PPE. │
  • └────────────────────────────────────────────────────────────────────────┘

Formulation Class Freezing Hazard (< 40°F) High Heat Hazard (> 90°F) Critical Storage Management Rules

Emulsifiable Concentrates (EC) Solvent separates; AI precipitates as hard crystal matrix; loss of emulsification. Increased vapor pressure; lowered flash point; extreme fire hazard. Store on lower metal shelving; keep in heated zone ( > 45 ∘ F > 45^\circ\text{F} > 4 5 ∘ F ); keep away from heat sources.

Suspension Concentrates (SC / Flowables) Irreversible coagulation; settles into solid rubbery cake that cannot be re-suspended. Bacterial growth in aqueous carriers; product separation; gas generation. Never allow to freeze; shake containers periodically; store at 50 ∘ F 50^\circ\text{F} 5 0 ∘ F – 75 ∘ F 75^\circ\text{F} 7 5 ∘ F .

Dry Formulations (WP, WDG, DF, SP) Stable in cold if completely dry; condensation causes clumping and dissolves water-soluble bags. High humidity + heat causes caking, hydrolytic breakdown of packaging, and bag degradation. Store on elevated upper shelving or wooden pallets; never store directly on concrete; keep dry.

Microencapsulated (ME) Ice crystals puncture and rupture microscopic polyamide polymer capsules, releasing AI prematurely. Rapid polymer membrane degradation; capsule clumping; loss of timed release. Strict temperature control ( 45 ∘ F 45^\circ\text{F} 4 5 ∘ F – 80 ∘ F 80^\circ\text{F} 8 0 ∘ F ); protect from freezing under all circumstances.

Ventilation Engineering Standards

Toxic, solvent-laden, and volatile chemical vapors accumulate rapidly in sealed storage rooms, creating severe acute inhalation hazards for handlers and explosive atmospheric concentrations.

Mechanical Forced Exhaust Systems: Facilities must incorporate continuous or thermostatically/switch-activated mechanical exhaust systems capable of providing 6 to 10 complete air changes per hour .

Dual-Height Ventilation Geometry: Because pesticide solvent vapors (such as xylene, heavy aromatic naphtha, and organic esters) have vapor densities significantly heavier than air (air = 1.0; xylene = 3.7), exhaust intake louvers must be positioned 6 to 12 inches above the floor level to draw heavy toxic vapors out of the breathing zone. Fresh-air makeup intake vents must be positioned near the ceiling on the opposite wall to establish cross-room sweeping airflow.

Passive Ventilation Requirements: In small standalone storage sheds where mechanical power is unavailable, heavy-duty louvered vents backed with galvanized rodent-proof wire mesh must be installed at both floor level and ridge/eave ceiling levels on opposing walls.

3. Storage Organization, Chemical Segregation & Inventory Management

Improper arrangement of pesticide containers inside a storage facility leads to cross-contamination, catastrophic formulation mixing during minor leaks, and dangerous chemical reactions. ┌────────────────────────────────────────────────────────────────────────┐

  • │ MANDATORY CHEMICAL SEGREGATION RULES │
  • │ │
  • │ 1. VERTICAL SEGREGATION (DRY ABOVE LIQUID): │
  • │ • ALWAYS store dry formulations (WP, WDG, DF, Granules, Pellets) │
  • │ on UPPER metal shelves or elevated wooden/plastic pallets. │
  • │ • ALWAYS store liquid formulations (EC, SC, SL, ME, Oils) on LOWER │
  • │ shelving or directly on secondary containment floor trays. │
  • │ • RATIONALE: A leaking liquid jug on an upper shelf will drip onto │
  • │ and soak into dry powder bags below, contaminating formulations │
  • │ and creating catastrophic chemical reactions or dust explosions. │
  • │ │
  • │ 2. CHEMICAL HAZARD & PEST-CLASS ISOLATION: │
  • │ • Segregate herbicides, insecticides, fungicides, rodenticides, │
  • │ and plant growth regulators into distinct, labeled room bays. │
  • │ • ISOLATE VOLATILE HERBICIDES: Highly volatile phenoxy herbicides │
  • │ (e.g., 2,4-D, dicamba, triclopyr) outgas volatile vapors that │
  • │ can be absorbed by adjoining formulations, seeds, or PPE. │
  • │ │
  • │ 3. FLAMMABLE & COMBUSTIBLE LIQUIDS (NFPA-30): │
  • │ • All formulations with flash points < 140°F (Category 1, 2, or 3 │
  • │ flammables) must be stored in FM-approved, NFPA-30 compliant │
  • │ double-walled steel flammable storage cabinets. │
  • │ │
  • │ 4. ABSOLUTE PROHIBITION ON PROXIMATE COMMODITIES: │
  • │ • NEVER store pesticides in the same room with: human food, animal │
  • │ feed, livestock water, seed grain, veterinary pharmaceuticals, │
  • │ clean PPE, respirators, medical first aid supplies, or fertilizers│
  • └────────────────────────────────────────────────────────────────────────┘
  • First-In-First-Out (FIFO) Inventory Control

Chemical formulations possess finite shelf lives (typically 2 to 3 years under optimal conditions). Applicators must operate a disciplined First-In-First-Out (FIFO) inventory control program:

Date Marking: Upon receipt from the chemical dealer, permanently write the delivery date (month and year) on the container label or cap with a permanent industrial marker.

Rotation: Move older containers to the front of the shelf so they are consumed first during the operating season.

Inspection Protocol: Conduct monthly visual audits to inspect for bloated jugs, cracked caps, weeping seams, rusted metal bungs, crystallized precipitates, or deteriorating paper sacks.

External Emergency SDS & Manifest Binder: Maintain an active chemical inventory log and complete binder of Safety Data Sheets (SDS) in a weatherproof, clearly labeled lockbox mounted on the exterior of the storage building (or in the main administrative office). In a structural fire or chemical emergency, arriving firefighters must be able to instantly access the exact chemical inventory and hazard profiles without entering a toxic, burning building.