Study guide
2.3 Coinsurance and the Coinsurance Formula
Oregon Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Oregon Property & Casualty Insurance Exam Overview
Oregon Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D - Coverage for Damage to Your Auto 7.2 Exclusions and Part E - Duties After an Accident 7.3 Part F - General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Oregon P&C Insurance Regulation & Licensing
1.1 Oregon Division of Financial Regulation (DFR) 1.2 Oregon Producer Licensing Requirements 1.3 Continuing Education Requirements
22 Chapter 2: Property Insurance in Oregon
2.1 Homeowners Insurance in Oregon 2.2 Commercial Property Insurance in Oregon
23 Chapter 3: Auto & Casualty Insurance in Oregon
3.1 Oregon Auto Insurance Requirements 3.2 Casualty & Liability Insurance in Oregon
24 Chapter 4: Ethics & Professional Conduct
4.1 Producer Duties & Responsibilities 4.2 Claims Handling & Unfair Claim Settlement Practices
2.3 Coinsurance and the Coinsurance Formula
Key Takeaways Explain This Topic AI
Coinsurance requires carrying coverage equal to a stated percentage (commonly 80%) of value; falling short makes the insured a co-insurer on every partial loss.
Formula: (Amount Carried ÷ Amount Required) × Loss, where Amount Required = Value × Coinsurance %.
Apply the factor to the loss, cap at the policy limit and at the actual loss, then subtract the deductible last; the factor never exceeds 1.0.
Coinsurance is based on value at the time of loss, so inflation can create a hidden penalty even on a once-adequate limit.
Agreed Value suspends coinsurance; inflation-guard endorsements and annual value reviews keep the limit at or above the required percentage.
Last updated: June 2026
Why Coinsurance Exists
Most property losses are partial , not total. Without a penalty for underinsurance, an owner would insure a $500,000 building for $100,000, pay a small premium, and still recover most partial losses — underfunding the insurer for the real exposure. The coinsurance clause corrects this by requiring the insured to carry insurance equal to a stated percentage of value (commonly 80% , also 90% or 100%). Fall short and the insured becomes a co-insurer , sharing every partial loss in proportion to the shortfall.
Coinsurance is part of the broader concept of insurance-to-value (ITV) : ITV = Amount of Insurance ÷ Property Value. Reaching the coinsurance percentage avoids the penalty.
The Coinsurance Formula Claim Payment = (Amount Carried / Amount Required) x Loss
- Term Meaning
- Amount Carried The limit actually purchased
- Amount Required Property Value × Coinsurance %
- Loss The actual amount of the loss
Three caps and rules govern the result:
The payment is never more than the actual loss .
The payment is never more than the policy limit .
The deductible is subtracted after the coinsurance calculation.
If Amount Carried ≥ Amount Required, the factor is capped at 1.0 — no penalty (and no bonus for over-insuring).
Worked Example — The Penalty Applies
Building value $500,000 , 80% coinsurance, so Amount Required = $400,000 . The owner carries only $300,000 . A $100,000 partial fire loss occurs; $1,000 deductible.
- Step Calculation Result
- Amount Required $500,000 × 0.80 $400,000
- Coinsurance factor $300,000 / $400,000 0.75
- Indicated payment 0.75 × $100,000 $75,000
- Less deductible $75,000 − $1,000 $74,000
The owner recovers $74,000 and absorbs the rest — the penalty for carrying 75% of what was required. Note the penalty hits a partial loss; it is not just a total-loss issue.
When carried meets the requirement
If the same owner carried $400,000+, the factor is 1.0: payment = $100,000 − $1,000 = $99,000 (capped at the loss and limit).
Avoiding the Penalty and Exam Traps
Practical defenses against a coinsurance penalty:
Agreed Value endorsement — suspends coinsurance entirely.
Inflation-guard endorsement — automatically raises the limit to track rising replacement cost.
Annual value reviews — keep the limit at or above the required percentage.
Peak-season / value-reporting forms — for fluctuating inventory.
Traps:
The factor never exceeds 1.0 — over-insuring earns no extra recovery.
Apply coinsurance to the loss , not to the building value, then cap at the limit, then subtract the deductible — in that order.
Coinsurance is based on value at the time of loss , not the value when the policy was written — inflation can silently create a shortfall.
A common distractor multiplies the factor by the building value rather than the loss — wrong.
Coinsurance vs. Insurance-to-Value Endorsements
The coinsurance percentage is a minimum , not a target. Carrying exactly 80% on an 80% clause means a total loss still leaves the insured 20% short, because the limit caps recovery. Most advisors recommend insuring to 100% of replacement cost and relying on inflation guard and a guaranteed/extended replacement cost endorsement to absorb rebuild-cost spikes after a catastrophe.
Key related endorsements and how they interact with coinsurance:
- Provision Effect on coinsurance Effect at total loss
- Agreed Value Suspends the clause Pays agreed amount
- Inflation Guard Keeps limit adequate Limit kept current
- Guaranteed Replacement Cost N/A Pays full rebuild even over limit
- Extended Replacement Cost N/A Pays limit + 25%–50%
Commercial nuance: the ISO BPP can be written with an Agreed Value option (the insured files a statement of values), which suspends coinsurance for the policy term. If the statement is not renewed, coinsurance snaps back — a tested gotcha.
Blanket Coinsurance and the Margin Clause
When one limit covers several buildings or locations on a blanket basis, coinsurance is measured against the total values reported on a statement of values. To prevent an insured from underreporting values to dodge the penalty, insurers attach a margin clause that caps recovery at a stated percentage (e.g., 110%) of the value shown for the damaged location. The interplay of blanket limits, the statement of values, and the margin clause is a step up in difficulty the exam sometimes reaches for.
Trap: Filing a low statement of values to cut premium can trigger both a coinsurance penalty and a margin-clause cap at claim time - the insured loses twice.
Reading a Coinsurance Question in the Right Order
Multi-step numeric questions resolve cleanly only if you process them in a fixed order. Lock in this sequence and the distractors fall away:
Compute required = value at loss x coinsurance %.
Compute the factor = carried / required, capped at 1.0.
Multiply the factor by the loss (not the value).
Cap the result at the policy limit and the actual loss .
Subtract the deductible last.
- Step Common wrong move
- Factor x loss Multiplying factor x building value
- Cap at 1.0 Giving a "bonus" for over-insuring
- Deductible last Subtracting it before coinsurance
Trap: Coinsurance is measured against value at the time of loss , so inflation can silently push an insured below the required percentage even though the limit never changed - the reason inflation-guard and agreed-value endorsements exist.