Study guide

18.2 Chemical Feed, Dosage Calculations & the Pounds Formula

Oregon Water and Wastewater Operator Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification

1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees

2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal

2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates

3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins

3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)

4 Chapter 4: Source Water, Intakes and Wells

4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection

5 Chapter 5: Coagulation, Clarification and Filtration

5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

6 Chapter 6: Drinking Water Disinfection

6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control

7 Chapter 7: Specialty Water Treatment and Residuals

7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate

8 Chapter 8: Distribution System Infrastructure

8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating

9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality

9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs

10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons

10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons

11 Chapter 11: Biological Wastewater Treatment

11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems

12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control

13 Chapter 13: Solids Handling and Biosolids

13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503

14 Chapter 14: Wastewater Collection Systems and Pumping

14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety

15 Chapter 15: Collection System Rehabilitation and Overflow Control

15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control

16 Chapter 16: Laboratory Procedures and Water Quality Testing

16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting

17 Chapter 17: Equipment, Electrical Systems and Maintenance

17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA

18 Chapter 18: Applied Water and Wastewater Mathematics

18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower

19 Chapter 19: Utility Safety

19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules

20 Chapter 20: Emergency Preparedness, Security and Utility Management

20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

18.2 Chemical Feed, Dosage Calculations & the Pounds Formula

Key Takeaways Explain This Topic AI

The Pounds Formula ( Pounds/day = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal \text{Pounds/day} = \text{Flow (MGD)} \times \text{Dosage (mg/L)} \times 8.34\text{ lbs/gal} Pounds/day = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal ) is the central mathematical relationship governing chemical dosing and mass loading in water and wastewater utilities.

One milligram per liter ( 1 mg/L 1\text{ mg/L} 1 mg/L ) is equivalent to one part per million ( 1 ppm 1\text{ ppm} 1 ppm ), which equals 8.34 pounds 8.34\text{ pounds} 8.34 pounds of pure chemical per million gallons of water.

When dosing commercial chemicals that are not 100% pure, the required commercial feed rate equals the pure chemical mass requirement divided by the decimal active ingredient fraction ( Commercial Feed = Pure Mass / Active Fraction \text{Commercial Feed} = \text{Pure Mass} / \text{Active Fraction} Commercial Feed = Pure Mass / Active Fraction ).

Liquid chemical calculations require accounting for specific gravity ( SG \text{SG} SG ), where liquid solution weight per gallon equals SG × 8.34 lbs/gal \text{SG} \times 8.34\text{ lbs/gal} SG × 8.34 lbs/gal .

Chemical pump calibration utilizes drawdown tubes measuring milliliters per minute ( mL/min \text{mL/min} mL/min ), converted to daily liquid volume via the relationship 1 gpd = 2.629 mL/min 1\text{ gpd} = 2.629\text{ mL/min} 1 gpd = 2.629 mL/min .

Last updated: October 2026

9.2 Chemical Feed, Dosage Calculations & the Pounds Formula

Water and wastewater treatment processes rely on precise chemical addition to facilitate coagulation, flocculation, pathogen disinfection, pH stabilization, and fluoridation. Over-dosing chemicals squanders public utility funds, creates hazardous chemical residuals (such as disinfection byproducts), and risks permit violations. Under-dosing fails to achieve pathogen inactivation, destabilize colloidal turbidity, or precipitate phosphorus.

To control these processes accurately, operators rely on the Pounds Formula —the most frequently utilized calculation in environmental utility operations.

The Foundational Pounds Formula

The pounds formula calculates the daily mass of chemical required to achieve a target concentration in a given flow stream, or conversely, calculates the mass of pollutants (such as BOD5 or TSS) entering a treatment facility:

Chemical Feed (lbs/day) = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal \text{Chemical Feed (lbs/day)} = \text{Flow (MGD)} \times \text{Dosage (mg/L)} \times 8.34\text{ lbs/gal} Chemical Feed (lbs/day) = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal

Scientific Derivation & Unit Cancellation

To understand why this formula works, examine the definition of concentration. One milligram per liter ( 1 mg/L 1\text{ mg/L} 1 mg/L ) expresses a mass-to-volume ratio in the metric system. Because 1 liter of water 1\text{ liter of water} 1 liter of water has a mass of 1 , 000 grams = 1 , 000 , 000 milligrams 1,000\text{ grams} = 1,000,000\text{ milligrams} 1 , 000 grams = 1 , 000 , 000 milligrams , a concentration of 1 mg/L 1\text{ mg/L} 1 mg/L represents one part per million ( 1 ppm 1\text{ ppm} 1 ppm ) :

1 mg/L = 1 ppm = 1 lb chemical 1 , 000 , 000 lbs of water 1\text{ mg/L} = 1\text{ ppm} = \frac{1\text{ lb chemical}}{1,000,000\text{ lbs of water}} 1 mg/L = 1 ppm = 1 , 000 , 000 lbs of water 1 lb chemical ​

Now consider 1.0 Million Gallons (MG) 1.0\text{ Million Gallons (MG)} 1.0 Million Gallons (MG) of water. Since one gallon of water weighs 8.34 lbs 8.34\text{ lbs} 8.34 lbs , one million gallons of water weighs:

1 , 000 , 000 gal × 8.34 lbs/gal = 8 , 340 , 000 lbs 1,000,000\text{ gal} \times 8.34\text{ lbs/gal} = 8,340,000\text{ lbs} 1 , 000 , 000 gal × 8.34 lbs/gal = 8 , 340 , 000 lbs

If we apply a chemical dosage of 1.0 ppm 1.0\text{ ppm} 1.0 ppm ( 1 lb of chemical per million pounds of water 1\text{ lb of chemical per million pounds of water} 1 lb of chemical per million pounds of water ) to one million gallons of water:

Mass = 8 , 340 , 000 lbs of water × ( 1 lb chemical 1 , 000 , 000 lbs water ) = 8.34 lbs chemical \text{Mass} = 8,340,000\text{ lbs of water} \times \left( \frac{1\text{ lb chemical}}{1,000,000\text{ lbs water}} \right) = 8.34\text{ lbs chemical} Mass = 8 , 340 , 000 lbs of water × ( 1 , 000 , 000 lbs water 1 lb chemical ​ ) = 8.34 lbs chemical

Therefore, 1 mg/L 1\text{ mg/L} 1 mg/L applied to 1 MGD 1\text{ MGD} 1 MGD always equals exactly 8.34 lbs/day 8.34\text{ lbs/day} 8.34 lbs/day . Setting up the unit cancellation grid confirms this:

( Million Gallons day ) × ( lbs Chemical Million lbs Water ) × ( 8.34 lbs Water Gallon Water ) × ( 1 , 000 , 000 Gallons Million Gallons ) = lbs Chemical day \left( \frac{\text{Million Gallons}}{\text{day}} \right) \times \left( \frac{\text{lbs Chemical}}{\text{Million lbs Water}} \right) \times \left( \frac{8.34\text{ lbs Water}}{\text{Gallon Water}} \right) \times \left( \frac{1,000,000\text{ Gallons}}{\text{Million Gallons}} \right) = \frac{\text{lbs Chemical}}{\text{day}} ( day Million Gallons ​ ) × ( Million lbs Water lbs Chemical ​ ) × ( Gallon Water 8.34 lbs Water ​ ) × ( Million Gallons 1 , 000 , 000 Gallons ​ ) = day lbs Chemical ​

Formula Rearrangements

Depending on the operational data available, the pounds formula can be rearranged algebraically to solve for dosage or flow:

Solving for Dosage (mg/L) : Dosage (mg/L) = Chemical Feed (lbs/day) Flow (MGD) × 8.34 lbs/gal \text{Dosage (mg/L)} = \frac{\text{Chemical Feed (lbs/day)}}{\text{Flow (MGD)} \times 8.34\text{ lbs/gal}} Dosage (mg/L) = Flow (MGD) × 8.34 lbs/gal Chemical Feed (lbs/day) ​

Solving for Flow (MGD) : Flow (MGD) = Chemical Feed (lbs/day) Dosage (mg/L) × 8.34 lbs/gal \text{Flow (MGD)} = \frac{\text{Chemical Feed (lbs/day)}}{\text{Dosage (mg/L)} \times 8.34\text{ lbs/gal}} Flow (MGD) = Dosage (mg/L) × 8.34 lbs/gal Chemical Feed (lbs/day) ​

Adjusting for Chemical Purity and Active Ingredients

The basic pounds formula assumes that the chemical being fed is 100 % 100\% 100% pure active ingredient (such as pure gaseous chlorine, Cl 2 \text{Cl}_2 Cl 2 ​ ). However, most water and wastewater treatment chemicals are supplied as dry mixtures, hydrated crystals, or commercial aqueous solutions containing inert binders, carrier water, or stabilizers.

Because commercial products are less than 100 % 100\% 100% pure, more commercial product must be fed to supply the required mass of pure chemical:

Commercial Chemical Feed (lbs/day) = Pure Chemical Required (lbs/day) Active Ingredient Fraction (decimal) \text{Commercial Chemical Feed (lbs/day)} = \frac{\text{Pure Chemical Required (lbs/day)}}{\text{Active Ingredient Fraction (decimal)}} Commercial Chemical Feed (lbs/day) = Active Ingredient Fraction (decimal) Pure Chemical Required (lbs/day) ​

Commercial Chemical Feed (lbs/day) = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal Purity (as a decimal) \text{Commercial Chemical Feed (lbs/day)} = \frac{\text{Flow (MGD)} \times \text{Dosage (mg/L)} \times 8.34\text{ lbs/gal}}{\text{Purity (as a decimal)}} Commercial Chemical Feed (lbs/day) = Purity (as a decimal) Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal ​

Common Chemical Strengths & Active Fractions

Chemical Name Common Form Commercial Strength / Purity Decimal Fraction

Chlorine Gas ( Cl 2 \text{Cl}_2 Cl 2 ​ ) Liquefied gas under pressure 100 % 100\% 100% pure available chlorine 1.00 1.00 1.00

Calcium Hypochlorite [ Ca(OCl) 2 \text{Ca(OCl)}_2 Ca(OCl) 2 ​ ] Granular or tablets (HTH) 65 % 65\% 65% available chlorine 0.65 0.65 0.65

Sodium Hypochlorite ( NaOCl \text{NaOCl} NaOCl ) Liquid bleach solution 12.5 % 12.5\% 12.5% available chlorine by weight 0.125 0.125 0.125

Commercial Liquid Alum Liquid solution ∼ 48.5 % \sim 48.5\% ∼ 48.5% dry alum equivalent 0.485 0.485 0.485

Quicklime ( CaO \text{CaO} CaO ) Dry granular / pebble 90 % 90\% 90% to 95 % 95\% 95% active CaO \text{CaO} CaO 0.90 to 0.95 0.90\text{ to } 0.95 0.90 to 0.95

Hydrated Lime [ Ca(OH) 2 \text{Ca(OH)}_2 Ca(OH) 2 ​ ] Dry powder 85 % 85\% 85% to 90 % 90\% 90% active Ca(OH) 2 \text{Ca(OH)}_2 Ca(OH) 2 ​ 0.85 to 0.90 0.85\text{ to } 0.90 0.85 to 0.90

Hydrofluorosilicic Acid ( H 2 SiF 6 \text{H}_2\text{SiF}_6 H 2 ​ SiF 6 ​ ) Liquid solution 23 % 23\% 23% to 25 % 25\% 25% acid ( 19.2 % 19.2\% 19.2% available F − \text{F}^- F − ) 0.192 0.192 0.192

Important

An operator must never multiply by the purity decimal when determining chemical feed. Multiplying would reduce the feed rate, providing less chemical than required. Always divide by the active purity decimal to calculate the larger mass of commercial product required.

Liquid Chemical Feed Calculations & Specific Gravity

Liquid chemicals—such as sodium hypochlorite, liquid alum, ferric chloride, caustic soda ( NaOH \text{NaOH} NaOH ), and aqueous ammonia—are metered volumetrically (gallons per day or milliliters per minute). Calculating liquid chemical dosages requires accounting for Specific Gravity (SG) .

Specific Gravity & Solution Weight

Specific gravity is the ratio of the density of a substance to the density of pure water ( 8.34 lbs/gal 8.34\text{ lbs/gal} 8.34 lbs/gal at 4 ∘ C 4^\circ\text{C} 4 ∘ C ):

Weight of Liquid Chemical (lbs/gal) = Specific Gravity × 8.34 lbs/gal \text{Weight of Liquid Chemical (lbs/gal)} = \text{Specific Gravity} \times 8.34\text{ lbs/gal} Weight of Liquid Chemical (lbs/gal) = Specific Gravity × 8.34 lbs/gal

For example, commercial 12.5 % 12.5\% 12.5% sodium hypochlorite typically has a specific gravity of 1.20 1.20 1.20 : Weight of NaOCl Solution = 1.20 × 8.34 lbs/gal = 10.008 lbs/gal \text{Weight of } \text{NaOCl Solution} = 1.20 \times 8.34\text{ lbs/gal} = 10.008\text{ lbs/gal} Weight of NaOCl Solution = 1.20 × 8.34 lbs/gal = 10.008 lbs/gal

Active Ingredient Weight per Gallon

Once the total weight per gallon is known, multiply by the percent concentration by weight to determine the active chemical content per gallon:

Active Chemical (lbs/gal) = Solution Weight (lbs/gal) × ( % Concentration 100 ) \text{Active Chemical (lbs/gal)} = \text{Solution Weight (lbs/gal)} \times \left( \frac{\% \text{ Concentration}}{100} \right) Active Chemical (lbs/gal) = Solution Weight (lbs/gal) × ( 100 % Concentration ​ ) Active Cl 2 in 12.5 % NaOCl = 10.008 lbs/gal × 0.125 = 1.251 lbs active Cl 2 /gal \text{Active } \text{Cl}_2 \text{ in } 12.5\% \text{ NaOCl} = 10.008\text{ lbs/gal} \times 0.125 = 1.251\text{ lbs active } \text{Cl}_2\text{/gal} Active Cl 2 ​ in 12.5% NaOCl = 10.008 lbs/gal × 0.125 = 1.251 lbs active Cl 2 ​ /gal

Liquid Feed Rate in Gallons per Day (gpd)

Liquid Feed (gpd) = Pure Chemical Required (lbs/day) Active Chemical per Gallon (lbs/gal) \text{Liquid Feed (gpd)} = \frac{\text{Pure Chemical Required (lbs/day)}}{\text{Active Chemical per Gallon (lbs/gal)}} Liquid Feed (gpd) = Active Chemical per Gallon (lbs/gal) Pure Chemical Required (lbs/day) ​ Liquid Feed (gpd) = Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal Specific Gravity × 8.34 lbs/gal × ( % / 100 ) \text{Liquid Feed (gpd)} = \frac{\text{Flow (MGD)} \times \text{Dosage (mg/L)} \times 8.34\text{ lbs/gal}}{\text{Specific Gravity} \times 8.34\text{ lbs/gal} \times (\% / 100)} Liquid Feed (gpd) = Specific Gravity × 8.34 lbs/gal × ( %/100 ) Flow (MGD) × Dosage (mg/L) × 8.34 lbs/gal ​

Notice that the 8.34 8.34 8.34 constant in the numerator and denominator cancel out: Liquid Feed (gpd) = Flow (MGD) × Dosage (mg/L) Specific Gravity × ( % / 100 ) \text{Liquid Feed (gpd)} = \frac{\text{Flow (MGD)} \times \text{Dosage (mg/L)}}{\text{Specific Gravity} \times (\% / 100)} Liquid Feed (gpd) = Specific Gravity × ( %/100 ) Flow (MGD) × Dosage (mg/L) ​

Chemical Pump Calibration: Drawdown Cylinder Testing

Diaphragm and peristaltic chemical metering pumps deliver small flow rates that cannot be verified accurately with plant inline magnetic meters. Operators calibrate metering pumps using a graduated glass or PVC drawdown cylinder mounted on the chemical suction piping. ┌──────────────┐

  • │ Chemical Day │
  • │ Tank │
  • └──────┬───────┘
  • │
  • [Valve A] ── Normal feed from tank
  • │
  • ├─── [Valve B] ──► ┌───────────────┐
  • │ │ Drawdown Tube │ (Graduated in mL)
  • ▼ └───────────────┘
  • [Metering Pump]
  • │
  • ▼
  • To Injection Point
  • Drawdown Testing Procedure

Fill the drawdown tube with chemical from the storage tank.

Close the supply valve from the main storage tank (Valve A) while opening the calibration cylinder valve (Valve B).

Start a stopwatch and measure the milliliters ( mL \text{mL} mL ) drawn down over a known time (typically 1.0 or 2.0 minutes 1.0\text{ or } 2.0\text{ minutes} 1.0 or 2.0 minutes ).

Calculate the pump pumping rate in mL/min \text{mL/min} mL/min : Pump Rate (mL/min) = Milliliters Consumed (mL) Time Elapsed (minutes) \text{Pump Rate (mL/min)} = \frac{\text{Milliliters Consumed (mL)}}{\text{Time Elapsed (minutes)}} Pump Rate (mL/min) = Time Elapsed (minutes) Milliliters Consumed (mL) ​

Convert mL/min \text{mL/min} mL/min to Gallons per Day (gpd): gpd = mL/min × 1 , 440 min/day 3 , 785.4 mL/gal = mL/min 2.6288 \text{gpd} = \frac{\text{mL/min} \times 1,440\text{ min/day}}{3,785.4\text{ mL/gal}} = \frac{\text{mL/min}}{2.6288} gpd = 3 , 785.4 mL/gal mL/min × 1 , 440 min/day ​ = 2.6288 mL/min ​ mL/min = gpd × 2.6288 \text{mL/min} = \text{gpd} \times 2.6288 mL/min = gpd × 2.6288

Solution Dilution and Batching ( C 1 V 1 = C 2 V 2 C_1 V_1 = C_2 V_2 C 1 ​ V 1 ​ = C 2 ​ V 2 ​ )

When preparing chemical solutions in a day tank (e.g., preparing a working polymer solution or diluting concentrated caustic soda), the mass of active chemical before dilution equals the mass of active chemical after dilution:

C 1 × V 1 = C 2 × V 2 C_1 \times V_1 = C_2 \times V_2 C 1 ​ × V 1 ​ = C 2 ​ × V 2 ​

Where:

C 1 = Concentration of stock / source chemical C_1 = \text{Concentration of stock / source chemical} C 1 ​ = Concentration of stock / source chemical ( % , mg/L , or lbs/gal \%,\text{ mg/L},\text{ or lbs/gal} % , mg/L , or lbs/gal )

V 1 = Volume of stock / source chemical needed V_1 = \text{Volume of stock / source chemical needed} V 1 ​ = Volume of stock / source chemical needed

C 2 = Target concentration of final prepared solution C_2 = \text{Target concentration of final prepared solution} C 2 ​ = Target concentration of final prepared solution

V 2 = Total volume of final prepared solution V_2 = \text{Total volume of final prepared solution} V 2 ​ = Total volume of final prepared solution

Rearranging to solve for stock chemical volume:

V 1 = C 2 × V 2 C 1 V_1 = \frac{C_2 \times V_2}{C_1} V 1 ​ = C 1 ​ C 2 ​ × V 2 ​ ​ Dilution Water Volume = V 2 − V 1 \text{Dilution Water Volume} = V_2 - V_1 Dilution Water Volume = V 2 ​ − V 1 ​

Dry Chemical Feeder Calibration: The Catch-and-Weigh Method

Volumetric and gravimetric dry chemical feeders (screw feeders, belt feeders, and oscillating hoppers) deliver dry alum, hydrated lime, or soda ash. Calibration requires physically collecting the discharged chemical over a timed interval:

Feed Rate (lbs/min) = Net Weight Collected (lbs) Collection Time (minutes) \text{Feed Rate (lbs/min)} = \frac{\text{Net Weight Collected (lbs)}}{\text{Collection Time (minutes)}} Feed Rate (lbs/min) = Collection Time (minutes) Net Weight Collected (lbs) ​ Feed Rate (lbs/hr) = Feed Rate (lbs/min) × 60 min/hr \text{Feed Rate (lbs/hr)} = \text{Feed Rate (lbs/min)} \times 60\text{ min/hr} Feed Rate (lbs/hr) = Feed Rate (lbs/min) × 60 min/hr Feed Rate (lbs/day) = Feed Rate (lbs/hr) × 24 hr/day \text{Feed Rate (lbs/day)} = \text{Feed Rate (lbs/hr)} \times 24\text{ hr/day} Feed Rate (lbs/day) = Feed Rate (lbs/hr) × 24 hr/day

  • Step-by-Step Dosing Calculations
  • Worked Example 1: Disinfection with Calcium Hypochlorite

A remote community water system in eastern Oregon treats an average daily well flow of 350 , 000 gpd 350,000\text{ gpd} 350 , 000 gpd ( 0.35 MGD 0.35\text{ MGD} 0.35 MGD ). The target free chlorine residual after a 30-minute contact period is 1.2 mg/L 1.2\text{ mg/L} 1.2 mg/L , and water testing indicates a chlorine demand of 0.8 mg/L 0.8\text{ mg/L} 0.8 mg/L . The utility uses granular calcium hypochlorite containing 65 % 65\% 65% available chlorine. Calculate the daily chemical feed rate in pounds per day.

Calculate total chlorine dosage required (Dosage = = = Demand + + + Residual): Dosage = 0.8 mg/L + 1.2 mg/L = 2.0 mg/L \text{Dosage} = 0.8\text{ mg/L} + 1.2\text{ mg/L} = 2.0\text{ mg/L} Dosage = 0.8 mg/L + 1.2 mg/L = 2.0 mg/L

Calculate pure chlorine required using the pounds formula: Pure Cl 2 (lbs/day) = 0.35 MGD × 2.0 mg/L × 8.34 lbs/gal = 5.838 lbs/day \text{Pure } \text{Cl}_2 \text{ (lbs/day)} = 0.35\text{ MGD} \times 2.0\text{ mg/L} \times 8.34\text{ lbs/gal} = 5.838\text{ lbs/day} Pure Cl 2 ​ (lbs/day) = 0.35 MGD × 2.0 mg/L × 8.34 lbs/gal = 5.838 lbs/day

Adjust for 65 % 65\% 65% product purity: Commercial Feed Rate = 5.838 lbs/day 0.65 = 8.98 lbs/day \text{Commercial Feed Rate} = \frac{5.838\text{ lbs/day}}{0.65} = 8.98\text{ lbs/day} Commercial Feed Rate = 0.65 5.838 lbs/day ​ = 8.98 lbs/day

Worked Example 2: Liquid Sodium Hypochlorite Feed & Drawdown Calibration

A municipal wastewater treatment plant discharges 2.8 MGD 2.8\text{ MGD} 2.8 MGD of treated effluent and must maintain a chlorine dosage of 3.5 mg/L 3.5\text{ mg/L} 3.5 mg/L . The plant doses 12.5 % 12.5\% 12.5% sodium hypochlorite with a specific gravity of 1.20 1.20 1.20 .

Calculate:

The daily feed rate in gallons per day (gpd).

The drawdown pump calibration rate in milliliters per minute (mL/min).

Step 1: Calculate pure chlorine required : Pure Cl 2 (lbs/day) = 2.8 MGD × 3.5 mg/L × 8.34 lbs/gal = 81.732 lbs/day \text{Pure } \text{Cl}_2 \text{ (lbs/day)} = 2.8\text{ MGD} \times 3.5\text{ mg/L} \times 8.34\text{ lbs/gal} = 81.732\text{ lbs/day} Pure Cl 2 ​ (lbs/day) = 2.8 MGD × 3.5 mg/L × 8.34 lbs/gal = 81.732 lbs/day

Step 2: Determine active chlorine per gallon of bleach : Weight per gallon = 1.20 × 8.34 lbs/gal = 10.008 lbs/gal \text{Weight per gallon} = 1.20 \times 8.34\text{ lbs/gal} = 10.008\text{ lbs/gal} Weight per gallon = 1.20 × 8.34 lbs/gal = 10.008 lbs/gal Active Cl 2 per gallon = 10.008 lbs/gal × 0.125 = 1.251 lbs active Cl 2 /gal \text{Active } \text{Cl}_2 \text{ per gallon} = 10.008\text{ lbs/gal} \times 0.125 = 1.251\text{ lbs active } \text{Cl}_2\text{/gal} Active Cl 2 ​ per gallon = 10.008 lbs/gal × 0.125 = 1.251 lbs active Cl 2 ​ /gal

Step 3: Calculate liquid feed rate in gallons per day : Liquid Feed (gpd) = 81.732 lbs/day 1.251 lbs/gal = 65.33 gpd \text{Liquid Feed (gpd)} = \frac{81.732\text{ lbs/day}}{1.251\text{ lbs/gal}} = 65.33\text{ gpd} Liquid Feed (gpd) = 1.251 lbs/gal 81.732 lbs/day ​ = 65.33 gpd

Step 4: Convert to drawdown rate in mL/min : Feed Rate (mL/min) = 65.33 gal/day × 3 , 785.4 mL/gal 1 , 440 min/day = 247 , 300.2 1 , 440 = 171.74 mL/min \text{Feed Rate (mL/min)} = \frac{65.33\text{ gal/day} \times 3,785.4\text{ mL/gal}}{1,440\text{ min/day}} = \frac{247,300.2}{1,440} = 171.74\text{ mL/min} Feed Rate (mL/min) = 1 , 440 min/day 65.33 gal/day × 3 , 785.4 mL/gal ​ = 1 , 440 247 , 300.2 ​ = 171.74 mL/min

Worked Example 3: Fluoridation with Hydrofluorosilicic Acid

A conventional surface water filtration plant treats 4.2 MGD 4.2\text{ MGD} 4.2 MGD . Ambient raw water contains 0.10 mg/L 0.10\text{ mg/L} 0.10 mg/L of natural fluoride ion. The plant targets the OHA/CDC recommended optimal fluoride concentration of 0.70 mg/L 0.70\text{ mg/L} 0.70 mg/L using commercial hydrofluorosilicic acid ( H 2 SiF 6 \text{H}_2\text{SiF}_6 H 2 ​ SiF 6 ​ ). The commercial acid solution has a specific gravity of 1.23 1.23 1.23 , an acid concentration of 24 % 24\% 24% by weight, and contains 79.2 % 79.2\% 79.2% fluoride ion in the pure acid molecule ( 19.0 % 19.0\% 19.0% net available fluoride ion by weight). Calculate the required chemical feed rate in gallons per day.

Determine required dosage increase: Dose Increase = 0.70 mg/L − 0.10 mg/L = 0.60 mg/L \text{Dose Increase} = 0.70\text{ mg/L} - 0.10\text{ mg/L} = 0.60\text{ mg/L} Dose Increase = 0.70 mg/L − 0.10 mg/L = 0.60 mg/L

Calculate pure fluoride mass required: Pure F − (lbs/day) = 4.2 MGD × 0.60 mg/L × 8.34 lbs/gal = 21.017 lbs/day \text{Pure } \text{F}^- \text{ (lbs/day)} = 4.2\text{ MGD} \times 0.60\text{ mg/L} \times 8.34\text{ lbs/gal} = 21.017\text{ lbs/day} Pure F − (lbs/day) = 4.2 MGD × 0.60 mg/L × 8.34 lbs/gal = 21.017 lbs/day

Determine solution weight and net available fluoride per gallon: Solution Weight = 1.23 × 8.34 lbs/gal = 10.258 lbs/gal \text{Solution Weight} = 1.23 \times 8.34\text{ lbs/gal} = 10.258\text{ lbs/gal} Solution Weight = 1.23 × 8.34 lbs/gal = 10.258 lbs/gal Available F − per gallon = 10.258 lbs/gal × 0.190 = 1.949 lbs F − /gal \text{Available } \text{F}^- \text{ per gallon} = 10.258\text{ lbs/gal} \times 0.190 = 1.949\text{ lbs } \text{F}^-\text{/gal} Available F − per gallon = 10.258 lbs/gal × 0.190 = 1.949 lbs F − /gal

Calculate liquid acid feed rate: Liquid Feed (gpd) = 21.017 lbs/day 1.949 lbs/gal = 10.78 gpd \text{Liquid Feed (gpd)} = \frac{21.017\text{ lbs/day}}{1.949\text{ lbs/gal}} = 10.78\text{ gpd} Liquid Feed (gpd) = 1.949 lbs/gal 21.017 lbs/day ​ = 10.78 gpd

Practical Operator Scenarios & Exam Pitfalls

Multiplying vs. Dividing by Purity : If a problem requires 100 lbs 100\text{ lbs} 100 lbs of pure chemical and the product is 65 % 65\% 65% pure, multiplying 100 × 0.65 = 65 lbs 100 \times 0.65 = 65\text{ lbs} 100 × 0.65 = 65 lbs is an automatic error trap. Feeding 65 lbs 65\text{ lbs} 65 lbs provides only 42.25 lbs 42.25\text{ lbs} 42.25 lbs of active ingredient. Always divide: 100 / 0.65 = 153.8 lbs 100 / 0.65 = 153.8\text{ lbs} 100/0.65 = 153.8 lbs .

Forgetting Specific Gravity in Liquid Calculations : Water weighs 8.34 lbs/gal 8.34\text{ lbs/gal} 8.34 lbs/gal , but chemical solutions are denser. Failing to multiply by specific gravity underestimates solution weight and causes inaccurate chemical feed settings.

Drawdown Calibration Time Errors : If a drawdown test is conducted for 2 minutes 2\text{ minutes} 2 minutes and yields 300 mL 300\text{ mL} 300 mL , remember to divide by 2 2 2 to obtain 150 mL/min 150\text{ mL/min} 150 mL/min before calculating daily feed rates.