Study guide

5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

Oregon Water and Wastewater Operator Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification

1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees

2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal

2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates

3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins

3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)

4 Chapter 4: Source Water, Intakes and Wells

4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection

5 Chapter 5: Coagulation, Clarification and Filtration

5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

6 Chapter 6: Drinking Water Disinfection

6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control

7 Chapter 7: Specialty Water Treatment and Residuals

7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate

8 Chapter 8: Distribution System Infrastructure

8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating

9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality

9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs

10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons

10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons

11 Chapter 11: Biological Wastewater Treatment

11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems

12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control

13 Chapter 13: Solids Handling and Biosolids

13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503

14 Chapter 14: Wastewater Collection Systems and Pumping

14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety

15 Chapter 15: Collection System Rehabilitation and Overflow Control

15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control

16 Chapter 16: Laboratory Procedures and Water Quality Testing

16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting

17 Chapter 17: Equipment, Electrical Systems and Maintenance

17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA

18 Chapter 18: Applied Water and Wastewater Mathematics

18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower

19 Chapter 19: Utility Safety

19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules

20 Chapter 20: Emergency Preparedness, Security and Utility Management

20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

Key Takeaways Explain This Topic AI

OHA recognizes four standard filtration methods: conventional, direct, slow sand and diatomaceous earth; other technologies need demonstrated equal performance and an approved pilot study.

Slow sand filters run at about 0.03 to 0.10 gpm/sq ft without coagulant; the biological schmutzdecke does most of the work and is restored by scraping and a ripening period.

Diatomaceous earth filters need a precoat and continuous body feed added in proportion to influent flow; failing to add body feed is a sanitary survey significant deficiency.

Membrane flux is permeate flow divided by membrane area, recovery is permeate divided by feed, and rising transmembrane pressure at constant flux signals fouling.

Membrane systems receiving pathogen credit must run direct integrity tests such as pressure-decay tests at least daily, plus continuous indirect monitoring such as filtrate turbidity.

Last updated: October 2026

Why Alternative Filtration Matters in Oregon

Many small Oregon systems draw from clear Cascade or Coast Range streams where low turbidity favors simple filters. Salem's Geren Island facility on the North Santiam is a well-known example of large-scale slow sand filtration . OAR 333-061-0050(4)(c) names four standard filtration methods : conventional, direct, slow sand and diatomaceous earth. Other technologies, including cartridge, bag and membrane filters, are acceptable only if their removal of target organisms is shown to be equal or better. Every method other than conventional filtration requires an approved pilot study before full-scale use.

Performance Standards at a Glance

  • Filter type Typical rate Turbidity standard Federal Giardia / virus removal credit
  • Conventional 2-6 gpm/sq ft ≤ 0.3 NTU in 95% of 4-hour CFE readings; never > 1 NTU 2.5-log / 2.0-log
  • Direct 2-6 gpm/sq ft Same as conventional 2.0-log / 1.0-log
  • Slow sand about 0.03-0.10 gpm/sq ft ≤ 1 NTU in 95% of readings; never > 5 NTU 2.0-log / 2.0-log
  • Diatomaceous earth about 1 gpm/sq ft ≤ 1 NTU in 95% of readings; never > 5 NTU 2.0-log / 1.0-log

Cartridge, bag, membrane product-specific State-set limits based on demonstration Based on challenge and pilot testing

Disinfection must provide whatever inactivation the filtration credit does not, for a total of 3-log Giardia and 4-log virus control.

Slow Sand Filtration

A slow sand filter is a box of fine sand, often 2 to 4 feet deep, with an underdrain and no coagulant . Water passes so slowly (roughly 0.03-0.10 gpm/sq ft) that a sticky biological layer, the schmutzdecke , forms on top. It removes particles and pathogens by straining, adsorption and biological predation.

Best fit : low-turbidity, low-color water (generally under about 10 NTU). Algae and high turbidity clog the surface quickly.

Cleaning : when headloss reaches its limit, the filter is drained and the top inch or so of sand is scraped off, or the sand is harrowed in place. Sand is replaced (re-sanded) after many scrapings.

Ripening : a freshly scraped filter performs poorly until the schmutzdecke regrows, often a day or more. Operators filter to waste during ripening and watch turbidity closely.

Limits : slow sand cannot remove dissolved contaminants. That is why Salem's 2018 cyanotoxin event required added treatment for dissolved toxins.

Diatomaceous Earth (DE) Filtration

DE filters strain water through a cake of fossilized diatom skeletons supported on a septum.

Precoat : a thin layer of DE is deposited on the septum before filtering, commonly around 0.1-0.2 lb per sq ft.

Body feed : DE is added continuously with the influent flow so the cake stays porous instead of blinding.

Run end : when headloss reaches its limit, the cake is sluiced off and a new precoat is applied.

Any interruption of flow can cause the cake to fall off the septum, so DE filters need careful start-up and shutdown. OAR 333-061-0076 lists "body feed not added with influent flow" as a significant deficiency .

Cartridge and Bag Filters

Pressure housings hold disposable cartridges or bags rated in microns. They suit small groundwater-under-influence or spring sources with low turbidity. Elements must be replaced when the pressure differential reaches the manufacturer's limit. Not doing so is another listed significant deficiency, because overloaded elements can rupture or bypass.

Membrane Filtration

  • Membrane Approximate pore size Removes
  • Microfiltration (MF) about 0.1 µm Particles, protozoa, most bacteria
  • Ultrafiltration (UF) about 0.01 µm Adds some viruses and large organic molecules
  • Nanofiltration (NF) molecular Hardness, color, many organics
  • Reverse osmosis (RO) molecular Dissolved salts, most dissolved contaminants
  • Operating terms

Flux : permeate flow per unit membrane area, usually in gallons per square foot per day (gfd).

Recovery : permeate flow ÷ feed flow × 100. RO recovery is limited by scaling, so the remainder leaves as concentrate (reject) that needs disposal.

Transmembrane pressure (TMP) : the pressure driving water through the membrane. At constant flux, a rising TMP means fouling : particulate, organic, biological or mineral scale.

Cleaning : routine backwash or air scour, chemically enhanced backwashes, and periodic clean-in-place (CIP). CIP typically uses chlorine or caustic for organic and biological foulants and acid for mineral scale.

Worked example

A UF plant produces 1.2 MGD of permeate from 1.30 MGD of feed using 48,000 sq ft of membrane.

  • Flux = 1,200,000 gpd ÷ 48,000 sq ft = 25 gfd
  • Recovery = 1.2 ÷ 1.3 × 100 = 92.3 percent
  • Integrity testing

A membrane only removes pathogens if fibers and seals are intact. Systems receiving pathogen credit must:

run a direct integrity test , typically a pressure-decay test , at least once each day of operation; and

monitor indirectly and continuously, usually by filtrate turbidity.

Repairs such as pinning broken fibers follow any failed test. Failure to perform direct integrity testing is a listed significant deficiency in OAR 333-061-0076. RO plants also need pretreatment (cartridge filters, antiscalant, sometimes acid) and post-treatment , because permeate is aggressive and must be stabilized before distribution.