Study guide

5.2 Sedimentation, Clarification & Media Filtration Systems

Oregon Water and Wastewater Operator Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification

1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees

2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal

2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates

3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins

3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)

4 Chapter 4: Source Water, Intakes and Wells

4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection

5 Chapter 5: Coagulation, Clarification and Filtration

5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

6 Chapter 6: Drinking Water Disinfection

6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control

7 Chapter 7: Specialty Water Treatment and Residuals

7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate

8 Chapter 8: Distribution System Infrastructure

8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating

9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality

9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs

10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons

10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons

11 Chapter 11: Biological Wastewater Treatment

11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems

12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control

13 Chapter 13: Solids Handling and Biosolids

13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503

14 Chapter 14: Wastewater Collection Systems and Pumping

14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety

15 Chapter 15: Collection System Rehabilitation and Overflow Control

15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control

16 Chapter 16: Laboratory Procedures and Water Quality Testing

16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting

17 Chapter 17: Equipment, Electrical Systems and Maintenance

17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA

18 Chapter 18: Applied Water and Wastewater Mathematics

18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower

19 Chapter 19: Utility Safety

19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules

20 Chapter 20: Emergency Preparedness, Security and Utility Management

20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

5.2 Sedimentation, Clarification & Media Filtration Systems

Key Takeaways Explain This Topic AI

Sedimentation basins operate across four distinct functional zones, with high-rate tube settlers reducing vertical settling distances to decrease basin footprint requirements by 75%.

Dual-media filters utilize coarse, low-density anthracite coal over fine, high-density silica sand to enable true in-depth particulate filtration without surface blinding.

Filter ripening produces a transient turbidity spike immediately following backwash, necessitating a filter-to-waste cycle before routing effluent to finished water storage.

Under OHA and EPA Surface Water Treatment Rules, Combined Filter Effluent (CFE) must remain ≤ 0.3 NTU in at least 95% of monthly readings and never exceed 1.0 NTU.

Last updated: October 2026

3.3 Sedimentation, Clarification & Media Filtration Systems

Note

The physical separation of solids in drinking water treatment relies on two sequential barriers: clarification (sedimentation) and granular media filtration. Proper clarifier operation removes the bulk of settleable floc, preventing solids overloading on media filters, while filtration provides the final polishing barrier against pathogenic protozoans such as Giardia lamblia and Cryptosporidium .

Sedimentation Mechanics & Four Functional Zones

Sedimentation is the separation of suspended chemical flocs from water by gravitational settling. Conventional horizontal-flow rectangular basins are hydraulically partitioned into four operational zones : +-----------------------------------------------------------------------------+

  • | FOUR FUNCTIONAL ZONES OF A CLARIFIER BASIN |
  • +-----------------------------------------------------------------------------+
  • | INLET ZONE | SETTLING ZONE | OUTLET ZONE |
  • | | | |
  • | Diffuser | --------> Flow Streamline --------> | Effluent |
  • | Baffle | \ | Launders & |
  • | Dissipates | \ Particle Trajectory (vs) | V-Notch |
  • | Inlet Kinetic| \ | Weirs |
  • | Energy | v | (WOR Limit) |
  • +---------------+---------------------------------------------+---------------+
  • | SLUDGE ZONE |
  • | - Thickened solids blanket |
  • | - Mechanical flight-and-chain scrapers or suction headers |
  • +-----------------------------------------------------------------------------+

Inlet Zone: Receives water from the flocculator and uniformly distributes flow across the basin cross-section while dissipating inlet velocity. Uses perforated diffuser walls or slotted target baffles (head loss 0.05 − 0.10 ft 0.05-0.10 \text{ ft} 0.05 − 0.10 ft ) to establish calm, non-turbulent plug-flow conditions.

Settling Zone: The central, quiescent volume of the tank where gravitational settling occurs. Water flows horizontally at low velocity ( < 0.5 − 1.0 ft/min < 0.5-1.0 \text{ ft/min} < 0.5 − 1.0 ft/min ) while particles settle downward at terminal velocity v s v_s v s ​ .

Sludge Zone: The basin floor where settled floc accumulates and thickens. Solids are scraped continuously or intermittently toward a central sludge hopper via motorized flight-and-chain scrapers, traveling bridge scrapers, or submersible vacuum headers.

Outlet Zone: Collects clarified supernatant and channels it toward the filters. Consists of effluent launders fitted with adjustable V-notch weirs or submerged orifices. Uniform collection across the entire weir length is critical to avoid high-velocity localized upwelling that sweeps settled floc out of the basin.

Settling Regimes in Water Treatment

Type I (Discrete Settling): Gravitational settling of unhindered, non-flocculent particles (e.g., raw sand, silt, and grit) governed strictly by Stokes' Law : v s = g ( ρ p − ρ ) d 2 18 μ v_s = \frac{g(\rho_p - \rho)d^2}{18\mu} v s ​ = 18 μ g ( ρ p ​ − ρ ) d 2 ​ where g g g is gravitational acceleration, ρ p \rho_p ρ p ​ is particle density, ρ \rho ρ is fluid density, d d d is particle diameter, and μ \mu μ is dynamic viscosity.

Type II (Flocculent Settling): Particles coalesce and aggregate during settling, increasing in mass and altering their drag coefficient. Settling velocity accelerates as particles sink through the tank.

Type III (Hindered / Zone Settling): Occurs at high solids concentrations where particles are so crowded that inter-particle forces inhibit settling. Particles settle as a collective mass or blanket with a distinct liquid-solids interface.

Clarifier Configurations & High-Rate Clarification

Clarifier Design Operating Principle Surface Overflow Rate (SOR) Footprint & Application

Rectangular Horizontal-Flow Long horizontal path (length-to-width ≥ 4 : 1 \ge 4:1 ≥ 4 : 1 ) with flight scrapers 500 − 1000 gpd/ft 2 500 - 1000 \text{ gpd/ft}^2 500 − 1000 gpd/ft 2 Large land area; high hydraulic stability; conventional plants

Circular Center-Feed Central influent well; radial outward flow to perimeter launders 600 − 1200 gpd/ft 2 600 - 1200 \text{ gpd/ft}^2 600 − 1200 gpd/ft 2 Compact circular footprint; mechanical bottom rake arms

Tube Settlers / Lamella Plates Inclined modules ( 60 ∘ 60^\circ 6 0 ∘ angle) reducing settling distance to 2 − 3 inches 2-3 \text{ inches} 2 − 3 inches 2000 − 3000 gpd/ft 2 2000 - 3000 \text{ gpd/ft}^2 2000 − 3000 gpd/ft 2 Retrofits conventional basins; reduces footprint by up to 75 % 75\% 75%

Dissolved Air Flotation (DAF) Microbubbles ( 30 − 100 μ m 30-100 \ \mu\text{m} 30 − 100 μ m ) float light floc to surface scum layer 3000 − 6000 gpd/ft 2 3000 - 6000 \text{ gpd/ft}^2 3000 − 6000 gpd/ft 2 Ideal for low-turbidity, high-color, or algae-laden PNW reservoirs

High-Rate Tube Settlers & Lamella Plates

Conventional settling basins require massive surface areas because particles must fall 10 − 15 feet 10-15 \text{ feet} 10 − 15 feet to reach the sludge floor. Tube settlers and inclined lamella plates drastically alter this hydraulic dynamic:

Modules comprise PVC tubes or corrugated plates inclined at a 60 ∘ 60^\circ 6 0 ∘ angle .

Flow enters the bottom and travels upward in laminar flow (Reynolds number R e < 500 Re < 500 R e < 500 ).

The vertical settling distance is reduced from 12 feet 12 \text{ feet} 12 feet to only 2 to 3 inches 2 \text{ to } 3 \text{ inches} 2 to 3 inches .

Particles settle onto the bottom surface of the inclined tube within minutes, agglomerate, and slide downward by gravity against upward flow, dropping into the sludge zone below.

Operational Benefit: Tube settlers increase the hydraulic throughput of an existing basin by 200 % to 400 % 200\% \text{ to } 400\% 200% to 400% or decrease the footprint of a new facility by 75 % 75\% 75% .

Dissolved Air Flotation (DAF)

In cold, low-turbidity Pacific Northwest reservoirs subject to seasonal cyanobacterial blooms (e.g., coastal and Willamette Valley impoundments), alum floc is light and buoyant (specific gravity ≈ 1.002 − 1.010 \approx 1.002-1.010 ≈ 1.002 − 1.010 ), settling sluggishly. Dissolved Air Flotation (DAF) inverts the conventional clarification process. A recycle stream ( 8 − 12 % 8-12\% 8 − 12% of plant flow) is saturated with air in a pressure vessel at 60 − 85 psi 60-85 \text{ psi} 60 − 85 psi . When injected into the contact zone at atmospheric pressure, the air precipitates millions of microscopic bubbles ( 30 − 100 μ m 30-100 \ \mu\text{m} 30 − 100 μ m diameter). The bubbles attach to chemical flocs and float them to the basin surface as a dense blanket ("float"), which is mechanically skimmed off. Clarified effluent is drawn from the bottom.

Hydraulic Operational Parameters & Equations

Plant operators must continuously evaluate three key hydraulic parameters to ensure clarifier efficiency:

1. Surface Overflow Rate (SOR)

The volume of water applied per unit of clarifier surface area per day: SOR = Flow Rate (gpd) Basin Surface Area (ft 2 ) \text{SOR} = \frac{\text{Flow Rate (gpd)}}{\text{Basin Surface Area (ft}^2\text{)}} SOR = Basin Surface Area (ft 2 ) Flow Rate (gpd) ​

Conventional Basins: 500 to 1000 gpd/ft 2 500 \text{ to } 1000 \text{ gpd/ft}^2 500 to 1000 gpd/ft 2 (equivalent to 0.35 − 0.70 gpm/ft 2 0.35 - 0.70 \text{ gpm/ft}^2 0.35 − 0.70 gpm/ft 2 ).

Tube Settler Clarifiers: 2000 to 3000 gpd/ft 2 2000 \text{ to } 3000 \text{ gpd/ft}^2 2000 to 3000 gpd/ft 2 (equivalent to 1.4 − 2.1 gpm/ft 2 1.4 - 2.1 \text{ gpm/ft}^2 1.4 − 2.1 gpm/ft 2 ).

Operational Significance: Any particle with a settling velocity ( v s v_s v s ​ ) greater than the SOR will be completely captured. If plant flow is pushed beyond design SOR, rising upward currents exceed v s v_s v s ​ , causing floc carryover onto the filters.

2. Weir Overflow Rate (WOR)

The volume of clarified water exiting over each linear foot of effluent weir per day: WOR = Flow Rate (gpd) Total Active Weir Length (ft) \text{WOR} = \frac{\text{Flow Rate (gpd)}}{\text{Total Active Weir Length (ft)}} WOR = Total Active Weir Length (ft) Flow Rate (gpd) ​

Standard Design Threshold: ≤ 20 , 000 gpd/ft \le 20,000 \text{ gpd/ft} ≤ 20 , 000 gpd/ft (or ≤ 10 , 000 − 15 , 000 gpd/ft \le 10,000-15,000 \text{ gpd/ft} ≤ 10 , 000 − 15 , 000 gpd/ft for light flocs).

Operational Significance: Excessive WOR generates localized high-velocity approach currents ("drawdown vortices") near the launders that lift settled floc up and over the weir crest.

3. Hydraulic Detention Time ( D T DT D T )

The theoretical time water resides within the basin volume: D T = Basin Volume (gal) Flow Rate (gpm) or D T = Volume (gal) × 24 Flow Rate (gpd) ( in hours ) DT = \frac{\text{Basin Volume (gal)}}{\text{Flow Rate (gpm)}} \quad \text{or} \quad DT = \frac{\text{Volume (gal)} \times 24}{\text{Flow Rate (gpd)}} \quad (\text{in hours}) D T = Flow Rate (gpm) Basin Volume (gal) ​ or D T = Flow Rate (gpd) Volume (gal) × 24 ​ ( in hours )

Conventional rectangular clarifiers require 2.0 to 4.0 hours 2.0 \text{ to } 4.0 \text{ hours} 2.0 to 4.0 hours of detention time.

Media Filtration Physics & Transport Mechanics

Granular media filtration is not a simple physical sieve. Uncoagulated water passed through fine silica sand will show negligible removal of submicron viruses, bacteria, and colloids because the pore spaces between sand grains are 50 to 200 times 50 \text{ to } 200 \text{ times} 50 to 200 times larger than colloidal particles. Removal depends upon transport and attachment : +-----------------------------------------------------------------------------+

  • | FIVE MECHANISMS OF MEDIA FILTRATION |
  • +-----------------------------------------------------------------------------+
  • | [1] Mechanical Straining: Particle larger than media pore throat |
  • | [2] Sedimentation: Particle settles onto grain within pore channel |
  • | [3] Interception: Streamline passes within 1 particle radius |
  • | [4] Impaction: Inertia causes particle to cross streamlines |
  • | [5] Adsorption: Van der Waals & electrostatic attachment |
  • | (Requires prior chemical coagulation!) |
  • +-----------------------------------------------------------------------------+

Mechanical Straining: Particles larger than the inter-granular pore throat become physically trapped at the media boundary.

Sedimentation: Micro-particles flowing through interstitial pore channels settle gravitationally onto media surfaces.

Interception: A particle following fluid streamlines contacts a media collector grain because its radius exceeds streamline distance.

Inertial Impaction: Dense particles diverge from curved fluid streamlines due to momentum and impact media surfaces.

Physicochemical Adsorption: Once transported to within nanometer proximity, destabilized particles attach to the media surface via short-range van der Waals attractive forces and electrostatic bonding. Coagulation is mandatory: without charge neutralization, electrostatic repulsion prevents particles from attaching to media grains.

Media Configurations: Dual-Media vs. Rapid Sand +-----------------------------------------------------------------------------+

  • | RAPID SAND vs. DUAL-MEDIA PROFILES |
  • +-----------------------------------+-----------------------------------------+
  • | RAPID SAND FILTER | DUAL-MEDIA FILTER |
  • | | |
  • | [Fine Sand Layer (Top)] | [Coarse Anthracite Coal (Top)] |
  • | * Size: 0.45 - 0.55 mm | * Size: 0.9 - 1.1 mm |
  • | * Sp. Gr. = 2.65 | * Sp. Gr. = 1.4 - 1.6 (Depth: 18-24") |
  • | * Surface blinding / rapid loss | * Traps heavy floc in deep pores |
  • | | |
  • | [Coarse Sand Layer (Bottom)] | [Fine Silica Sand (Bottom)] |
  • | * Under-utilized media depth | * Size: 0.45 - 0.55 mm |
  • | * Short filter runs (12-24 hrs) | * Sp. Gr. = 2.65 (Depth: 8-12") |
  • | | * Polishes fine turbidity |
  • | | * Long runs (36-72 hrs) |
  • +-----------------------------------+-----------------------------------------+
  • The Rapid Sand Limitation

Traditional single-medium rapid sand filters contain 24 − 30 inches 24-30 \text{ inches} 24 − 30 inches of silica sand (effective size 0.45 − 0.55 mm 0.45-0.55 \text{ mm} 0.45 − 0.55 mm ). When backwashed with water, hydraulic fluidization stratifies the media: fine grains rise to the top while coarse grains sink to the bottom. Consequently, incoming clarified water encounters the finest pores at the very top surface. The top 2 inches 2 \text{ inches} 2 inches become blinded with solids, causing rapid head loss accumulation while the underlying bed remains completely unutilized.

The Dual-Media Solution

Dual-media filters eliminate surface blinding by pairing coarse anthracite coal over fine silica sand :

Anthracite Coal (Top Layer): Effective size 0.9 to 1.1 mm 0.9 \text{ to } 1.1 \text{ mm} 0.9 to 1.1 mm , depth 18 − 24 inches 18-24 \text{ inches} 18 − 24 inches , specific gravity 1.4 to 1.6 1.4 \text{ to } 1.6 1.4 to 1.6 .

Silica Sand (Bottom Layer): Effective size 0.45 to 0.55 mm 0.45 \text{ to } 0.55 \text{ mm} 0.45 to 0.55 mm , depth 8 − 12 inches 8-12 \text{ inches} 8 − 12 inches , specific gravity 2.65 2.65 2.65 .

Hydraulic Behavior: During backwashing, the entire bed expands and fluidizes. Because anthracite has a significantly lower specific gravity ( 1.4 − 1.6 1.4-1.6 1.4 − 1.6 ) than silica sand ( 2.65 2.65 2.65 ), it settles more slowly upon flow cessation. The coarser anthracite always resettles on top of the finer sand. This creates true depth filtration : coarse floc is captured throughout the open pore depth of the anthracite, allowing the dense sand below to capture fine particles without premature surface head loss.

Multi-Media (Tri-Media): Adds a bottom 3 − 6 inch 3-6 \text{ inch} 3 − 6 inch polishing layer of dense garnet or ilmenite (effective size 0.2 − 0.3 mm 0.2-0.3 \text{ mm} 0.2 − 0.3 mm , specific gravity 4.2 4.2 4.2 ).

Granular Activated Carbon (GAC) Filter-Adsorbers: Replaces anthracite with virgin GAC to provide dual functionality: physical particulate filtration and simultaneous adsorption of dissolved taste/odor compounds (geosmin, MIB), pesticides, and DBP precursors.

  • Filter Operation, Ripening & Backwashing Dynamics
  • Operating Parameters

Filtration Rate: Conventional gravity rapid rate is 2.0 to 6.0 gpm/ft 2 2.0 \text{ to } 6.0 \text{ gpm/ft}^2 2.0 to 6.0 gpm/ft 2 .

Filter Run Termination: A filter run concludes when any one of three endpoints is reached:

Terminal Head Loss: Head loss through the bed accumulates to 6.0 to 9.0 feet 6.0 \text{ to } 9.0 \text{ feet} 6.0 to 9.0 feet of water column.

Turbidity Breakthrough: Effluent turbidity rises above the plant baseline ( > 0.10 NTU > 0.10 \text{ NTU} > 0.10 NTU ).

Maximum Time Limit: Elapsed run time reaches 48 to 72 hours 48 \text{ to } 72 \text{ hours} 48 to 72 hours (preventing media compaction and anaerobic slime growth).

The Ripening Cycle & Filter-to-Waste

Immediately following a backwash, clean media grains lack the "collector sheath" of attached floc that aids particle capture. During the first 15 to 60 minutes 15 \text{ to } 60 \text{ minutes} 15 to 60 minutes of operation, a transient spike in effluent turbidity occurs. This ripening period is one of the most vulnerable phases of filtration, because pathogens can pass while particle removal is still poor. Many plants use filter-to-waste , routing the first water to waste until individual filter turbidity reaches the plant's goal (often 0.10 NTU or less), or use extended terminal subfluidization or slow-start techniques. These are optimization practices, not a specific OHA filter-to-waste mandate.

Backwashing Hydraulics & Mudball Prevention

Backwashing cleans granular media by fluidizing the bed and dislodging captured solids:

Bed Expansion: The upward flow of clean treated water must expand the media bed by 20 % to 50 % 20\% \text{ to } 50\% 20% to 50% .

Upflow Rate: Typically 15 to 20 gpm/ft 2 15 \text{ to } 20 \text{ gpm/ft}^2 15 to 20 gpm/ft 2 . Because cold water has higher dynamic viscosity and density than warm water, it exerts greater hydraulic drag. An upflow velocity that achieves 30 % 30\% 30% expansion in 5 ∘ C 5^\circ\text{C} 5 ∘ C winter water will under-expand the bed in 20 ∘ C 20^\circ\text{C} 2 0 ∘ C summer water; conversely, a summer backwash rate applied to winter water will wash media out into the waste troughs.

Auxiliary Scour: Water backwashing alone cannot sheer sticky chemical floc off media grains. Facilities utilize surface wash sweeps or subsurface air scour ( 3 − 5 scfm/ft 2 3-5 \text{ scfm/ft}^2 3 − 5 scfm/ft 2 for 3 − 5 minutes 3-5 \text{ minutes} 3 − 5 minutes ) prior to fluidization. Auxiliary scour is essential to prevent mudballs —dense agglomerations of clay, polymer, and sand that grow to baseball size, sink to the gravel underdrain, cause localized jetting, and disrupt flow distribution.

Regulatory Compliance: EPA & OHA Surface Water Treatment Rules

Under 40 CFR 141 and OAR 333-061-0032 , conventional surface water treatment plants must adhere to strict Combined Filter Effluent (CFE) and Individual Filter Effluent (IFE) turbidimetric performance standards:

1. Combined Filter Effluent (CFE) Standards

95th Percentile Limit: CFE turbidity must remain ≤ 0.3 NTU \le 0.3 \text{ NTU} ≤ 0.3 NTU in at least 95 % 95\% 95% of measurements taken each calendar month (recorded at least every four hours or continuously).

Maximum Instantaneous Limit: CFE turbidity must never exceed 1.0 NTU 1.0 \text{ NTU} 1.0 NTU at any time. Under OAR 333-061-0040, a filtered-water turbidity above 1.0 NTU 1.0 \text{ NTU} 1.0 NTU must be reported to OHA as soon as possible, and no later than the end of the next business day; consult OHA about public notice.

2. Individual Filter Effluent (IFE) Continuous Monitoring

Each filter is monitored continuously, with readings recorded at least every 15 minutes. IFE results are kept three years and reported monthly when a trigger occurs. For systems serving 10,000 or more people, OAR 333-061-0040 sets these triggers:

IFE condition (two consecutive 15-minute readings) Required action

Over 1.0 NTU at any time Report the filter, values and dates; within 7 days either produce a filter profile or report the obvious cause

Over 0.5 NTU at the end of the first four hours after backwash or return to service Same: report, plus a filter profile within 7 days or the obvious cause

Over 1.0 NTU in each of three consecutive months Filter self-assessment within 14 days

Over 2.0 NTU in each of two consecutive months Arrange a comprehensive performance evaluation (CPE) within 30 days ; report completed within 90 days

Smaller systems follow the parallel provisions in the same rule: report exceedances over 1 NTU, perform a self-assessment after three consecutive months, and complete a CPE within 60 days (report within 120 days) after two consecutive months over 2 NTU.