Study guide

20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

Oregon Water and Wastewater Operator Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification

1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees

2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal

2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates

3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins

3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)

4 Chapter 4: Source Water, Intakes and Wells

4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection

5 Chapter 5: Coagulation, Clarification and Filtration

5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

6 Chapter 6: Drinking Water Disinfection

6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control

7 Chapter 7: Specialty Water Treatment and Residuals

7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate

8 Chapter 8: Distribution System Infrastructure

8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating

9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality

9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs

10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons

10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons

11 Chapter 11: Biological Wastewater Treatment

11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems

12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control

13 Chapter 13: Solids Handling and Biosolids

13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503

14 Chapter 14: Wastewater Collection Systems and Pumping

14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety

15 Chapter 15: Collection System Rehabilitation and Overflow Control

15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control

16 Chapter 16: Laboratory Procedures and Water Quality Testing

16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting

17 Chapter 17: Equipment, Electrical Systems and Maintenance

17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA

18 Chapter 18: Applied Water and Wastewater Mathematics

18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower

19 Chapter 19: Utility Safety

19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules

20 Chapter 20: Emergency Preparedness, Security and Utility Management

20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

Key Takeaways Explain This Topic AI

Community water systems serving more than 3,300 people must certify a risk and resilience assessment and, within six months, an emergency response plan, then review and recertify both every five years under AWIA.

Cyber incidents at Oldsmar, Florida (2021) and Aliquippa, Pennsylvania (2023) showed why SCADA must be kept off the open internet and protected with unique passwords, multifactor authentication, segmentation and offline backups.

Signs of tampering, such as cut locks, open hatches or unexplained chemical changes, require isolating the facility, notifying law enforcement and the regulator, and sampling before returning to service.

OHA requires water suppliers to follow up on water quality complaints and keep records, and community systems with 300 or more connections or more than 1,000 people need a 20-year master plan.

Asset management ties inventory, condition, criticality and lifecycle cost to capital and O&M budgets; supervisors also handle scheduling, evaluations, discipline and procurement.

Last updated: October 2026

Physical Security

Water and wastewater facilities are critical infrastructure. Basic protections are layered:

Deter and delay : fencing, locked gates and hatches, tamper-evident seals, lighting, and secured chemical storage.

Detect : intrusion alarms on hatches and doors, cameras, SCADA alarms for unexpected changes in level, pressure or chemical feed.

Respond : written procedures, after-hours callout, and coordination with local law enforcement.

Key and access control : track keys and codes, retrieve them when staff leave, and require visitor check-in.

Responding to suspected tampering

Do not disturb evidence; photograph the scene.

Isolate the affected facility if contamination is possible. That might mean taking a reservoir offline or closing valves.

Notify law enforcement and the regulator (OHA for drinking water; DEQ for wastewater permit issues) and follow your emergency response plan.

Sample, under guidance, before returning facilities to service, and consider public notification or advisories.

Report through information-sharing channels such as WaterISAC.

America's Water Infrastructure Act (AWIA)

Section 2013 of AWIA amended Safe Drinking Water Act section 1433. Community water systems serving more than 3,300 people must:

conduct and certify a risk and resilience assessment (RRA) covering natural hazards and malevolent acts; pipes and constructed conveyances; physical barriers; source water; treatment; storage; electronic, computer and other automated systems including cybersecurity ; financial infrastructure; chemical handling; and operation and maintenance;

prepare or revise an emergency response plan (ERP) that incorporates the RRA findings, and certify it within six months after the RRA; and

review and recertify both every five years .

ERPs cover strategies to improve resilience, emergency plans and procedures, actions to detect and reduce malevolent acts, and coordination with local emergency planning.

Operational Technology (OT) Cybersecurity

Attacks on water systems are real. In 2021 an intruder used remote-access software at the Oldsmar, Florida treatment plant to try to raise the sodium hydroxide setpoint to a dangerous level; an operator saw the cursor move and reversed it. In 2023 attackers defaced internet-exposed Unitronics PLCs at the Municipal Water Authority of Aliquippa, Pennsylvania and other utilities that still had default passwords.

Practical controls recommended by EPA and CISA:

Control Why it matters

Remove OT devices from direct internet exposure; use secure remote access only Stops casual scanning and attacks

Change default passwords; use unique, strong credentials and multifactor authentication Blocks the most common intrusion paths

Segment OT networks from business IT networks Limits the spread from phishing or ransomware

Keep offline backups of PLC programs, configurations and data; practice manual operation Allows recovery without paying ransom

  • Patch, inventory assets, log and monitor Reduces vulnerabilities and detects intrusions
  • Train staff on phishing and reporting People are the first line of defense

Engineering safeguards help too: hard-wired high and low limits on chemical feed pumps and alarms that do not depend on the HMI.

Oregon Planning and Customer Rules

Complaints : water suppliers must follow up on complaints about water quality and keep records of their actions (OAR 333-061-0025(2)(h)). Log the date, location, description, investigation, result and response.

Master plans : a community water system with 300 or more service connections or serving more than 1,000 people must keep a master plan covering at least 20 years . It includes demand projections, an engineering evaluation of existing facilities, deficiencies and a capital improvement program (OAR 333-061-0060(5)). It addresses water management and conservation planning when a Water Resources Department permit requires it.

Plans review : OHA must approve plans for new facilities and major modifications before construction (OAR 333-061-0060).

Asset Management and Budgeting

Asset management answers five questions:

What do we own?

What condition is it in?

Which assets are most critical (likelihood times consequence of failure)?

What is the minimum lifecycle cost to keep the service level?

How do we fund it long-term?

It feeds the capital improvement plan (CIP) and rate setting .

  • Budget Typical contents
  • Operating (O&M) Labor, power, chemicals, lab, maintenance parts, insurance, regulatory fees
  • Capital New or replacement assets with multi-year lives: pipes, pumps, treatment upgrades

Operators contribute by tracking chemical and power use per million gallons, documenting equipment condition, and justifying replacements with data. Procurement follows local purchasing rules, such as quotes, bids and sole-source justification, and records costs for later grant or disaster reimbursement.

Supervision and Administration

Supervisory tasks on the higher-grade exams include:

  • scheduling shifts and assigning work to cover all operating periods;
  • enforcing safety rules and SOPs, and keeping SOPs current;
  • conducting performance evaluations and documenting coaching and discipline consistently and fairly;
  • participating in hiring and training, and tracking staff certifications and CEUs;

preparing operating reports (daily logs, monthly reports, DMRs, OHA reports) and keeping records for the required periods; and

giving tours and public presentations, which build community support for rates and projects.