Study guide

2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification

Oregon Water and Wastewater Operator Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification

1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees

2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal

2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates

3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins

3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)

4 Chapter 4: Source Water, Intakes and Wells

4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection

5 Chapter 5: Coagulation, Clarification and Filtration

5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

6 Chapter 6: Drinking Water Disinfection

6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control

7 Chapter 7: Specialty Water Treatment and Residuals

7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate

8 Chapter 8: Distribution System Infrastructure

8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating

9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality

9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs

10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons

10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons

11 Chapter 11: Biological Wastewater Treatment

11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems

12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control

13 Chapter 13: Solids Handling and Biosolids

13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503

14 Chapter 14: Wastewater Collection Systems and Pumping

14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety

15 Chapter 15: Collection System Rehabilitation and Overflow Control

15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control

16 Chapter 16: Laboratory Procedures and Water Quality Testing

16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting

17 Chapter 17: Equipment, Electrical Systems and Maintenance

17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA

18 Chapter 18: Applied Water and Wastewater Mathematics

18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower

19 Chapter 19: Utility Safety

19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules

20 Chapter 20: Emergency Preparedness, Security and Utility Management

20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification

Key Takeaways Explain This Topic AI

Table 53 requires 12 months for Level 1, 36 months for Level 2, 96 months with 30 months of ODM for Level 3, and 120 months with 36 months of ODM for Level 4, with education allowed to replace part of the experience.

Experience counts toward certification up to one classification level higher than the facility where it was earned, and related-field experience may cover no more than half of the requirement.

The OIT designation needs a diploma plus 3 months of experience or 30 hours of training; passing the Level 1 exam starts a 36-month window, and there is no OIT fee.

Exam applications are due 60 days before the desired exam date; the passing score is 70 percent, and the same exam may be taken only twice in 12 months unless specific education is completed.

Small Water System certification needs the free OHA course and a 70 percent exam (since August 1, 2022), carries no fee, and expires July 31 three years after it is granted.

Last updated: October 2026

Basic Requirements (OAR 333-061-0235)

To be certified at Levels 1-4, an applicant must provide proof of a high school diploma, GED or higher degree, including the graduation date, and pass the exam for the type and level sought. Certification is issued separately for Water Treatment (WT) and Water Distribution (WD) .

Table 53: Experience, Education and Operational Decision-Making

  • Level (WT or WD) Experience Education substituted Operational decision-making (ODM)
  • Level 1 12 months none none

Level 1 (alternative) none 12-month certificate or associate degree in an OHA-approved water and environmental technology program none

  • Level 2 36 months, or 24 months none, or 12 months none
  • Level 3 96 / 60 / 48 / 36 months none / 12 / 24 / 36 months 30 / 30 / 24 / 18 months
  • Level 4 120 / 84 / 72 / 60 / 48 months none / 12 / 24 / 36 / 48 months 36 / 30 / 30 / 30 / 24 months

ODM experience is time spent making decisions that affect water quality or quantity, as defined in OAR 333-061-0020. It also counts as general work experience.

Experience Credit Rules

Hands-on only. Experience must come from direct, hands-on operation, including decisions that may affect public health. Officials, inspectors, managers, engineers and public works directors who do not actually operate or supervise facilities do not earn it.

Full-time equivalent. One year equals 12 months of full-time employment with 100 percent of the time on activities for the certification sought.

Related experience, capped at half. For WD, wastewater collection, water treatment, cross connection control, or industrial process water treatment. For WT, wastewater treatment, a wastewater lab, water distribution, or industrial process water treatment.

One level up. Experience earned at a facility qualifies for certification up to one classification level higher than that facility. OHA's example: an operator who has worked only at a Class 2 plant may apply for Level 3 but not Level 4. After moving to a Class 3 plant, the operator needs half the qualifying experience there before applying for Level 4.

Education substitution. Education may not exceed half the required experience, except at Level 1, where an approved certificate or degree can replace all experience. Twelve months of education equals one year of college, 30 semester hours, 45 quarter hours or 45 CEUs. On-the-job training may count as experience or education, not both.

The Filtration Endorsement Path

To earn the endorsement, an operator must:

  • hold WT Level 2;
  • have one year of ODM experience at a plant using conventional or direct filtration; and

pass the filtration endorsement exam.

OHA's FE Need-to-Know covers coagulation and flocculation chemistry and math, jar testing, sedimentation theory and loading math, filtration and backwash, filter-to-waste strategy, particle counters and streaming current monitors, and Surface Water Treatment Rule compliance. The endorsement carries a $90 application fee but no additional annual fee (OAR 333-061-0265).

Operator in Training (OIT)

Under OAR 333-061-0245(6), OHA may waive Level 1 education or experience requirements for an applicant who meets the education requirement and has one of the following:

  • 3 months of operating experience,
  • 3 months of water-related experience, or

30 hours of relevant training (3 CEUs or 3 college credits).

After passing the Level 1 exam, the person is an OIT for up to 36 calendar months to gain the experience. There is no OIT fee, and the operator tracks their own time before applying for Level 1.

Applying, Testing and Retakes

Submit the application, affidavit of employment, employment history, proof of education and payment. Exam applications must reach OHA 60 days before the desired exam date (OAR 333-061-0245(4)).

After approval, PSI emails the candidate to schedule the exam. The minimum passing score is 70 percent (OAR 333-061-0250).

A person may not take the same exam more than twice in a 12-month period unless they show they completed specific education related to the exam since the second attempt. OHA's guidance adds that DWS contacts the candidate before a third attempt and may require an exam-preparation course.

OHA's study page points to the AWWA operator certification study guides, the WPI/ABC formula sheet and the Need-to-Know criteria for each class.

Fees (OAR 333-061-0265, Table 54)

  • Item Fee
  • Level 1 / 2 / 3 / 4 application (WT or WD) $90 / $125 / $160 / $195
  • Filtration Endorsement $90
  • Certification renewal $140
  • Each additional certification renewed together $70
  • Reciprocity review (each certification) $100
  • Reinstatement $50 plus the renewal fee
  • Document replacement $25

Initial fees may be prorated for the remainder of the two-year cycle. Exam fees are refundable if the application is denied or the candidate cancels at least one week before the exam.

Reciprocity

Applicants holding current certification from a state or province with a substantially equivalent program submit a reciprocity application, affidavit and fee. OHA sends the other state a questionnaire and decides case by case, and it may require an exam. OHA generally offers reciprocity to applicants from states with EPA primacy.

Small Water System (SWS) Certification (OAR 333-061-0228)

Hold a high school diploma or GED; applicants certified after 2020 must submit proof.

Complete the free OHA-approved SWS training (the one-day Basics course, offered in person or online).

Pass the SWS exam with at least 70 percent , required since August 1, 2022.

Submit the SWS application with the course and exam certificates.

The SWS certificate is fee-exempt and expires on July 31 three years after it is granted . To renew, the operator retakes a free SWS course every three years and files a new application; no other course substitutes. The exam need not be repeated if the certificate never lapses. A Level 1-4 operator may serve as a small system's operator, but the system still files an SWS operator application every three years.