Study guide
1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees
Oregon Water and Wastewater Operator Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification
1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees
2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal
2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates
3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins
3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)
4 Chapter 4: Source Water, Intakes and Wells
4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection
5 Chapter 5: Coagulation, Clarification and Filtration
5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration
6 Chapter 6: Drinking Water Disinfection
6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control
7 Chapter 7: Specialty Water Treatment and Residuals
7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate
8 Chapter 8: Distribution System Infrastructure
8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating
9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality
9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs
10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons
10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons
11 Chapter 11: Biological Wastewater Treatment
11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems
12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control
13 Chapter 13: Solids Handling and Biosolids
13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503
14 Chapter 14: Wastewater Collection Systems and Pumping
14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety
15 Chapter 15: Collection System Rehabilitation and Overflow Control
15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control
16 Chapter 16: Laboratory Procedures and Water Quality Testing
16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting
17 Chapter 17: Equipment, Electrical Systems and Maintenance
17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA
18 Chapter 18: Applied Water and Wastewater Mathematics
18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower
19 Chapter 19: Utility Safety
19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules
20 Chapter 20: Emergency Preparedness, Security and Utility Management
20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management
1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees
Key Takeaways Explain This Topic AI
With a high school diploma or GED, Grade I needs 1 year of experience (6 months with an approved associate or four-year degree), Grade II needs 3 years, Grade III 6 years and Grade IV 8 years, with half of the Grade III or IV time at a Class II or Class III system respectively.
Treatment Grade IV also requires at least one year of post-high-school education; one year equals 45 CEUs or 45 quarter or 30 semester credits.
OIT applicants who complete DEQ-approved training may take the SWWS or Grade I exam and have 36 months to earn the experience; a Grade I Provisional certificate lasts 12 months and is not renewable.
Since May 1, 2025, DEQ exams are WPI 2025 standardized exams through PSI with 100 scored items plus up to 10 unscored, 3 hours, and a scaled passing score of 70.
An applicant may not take the same exam type and grade more than twice in 12 months unless they show specific education completed in the subject area.
Last updated: October 2026
How a DEQ Certificate Is Earned
DEQ's FAQ sums up the process in three steps: qualify by education and experience, apply with fees through Your DEQ Online (YDO) , and pass a national standardized exam. You do not need a lower grade first. Any applicant who meets the requirements for a grade may apply for it directly.
Education and Experience Pathways (OAR 340-049-0030)
Every certificate requires a high school diploma, GED or equivalent. The pathway tables (rules effective January 1, 2025) then trade years of operating experience against years of qualifying post-high-school (PHS) education :
Certificate HS only With PHS education
SWWS and Grade I (treatment or collection) 12 months 6 months plus an approved associate degree in water or wastewater technology, or a four-year degree (no related-experience credit in the 6 months)
Grade II 3 years 2 years + 1 year PHS; or 1 year + four-year degree
Grade III 6 years, half at a Class II or higher system 5 + 1 PHS; 4 + 2; 3 + 3; or 2 years + four-year degree (half at Class II or higher in every path)
Grade IV Collection 8 years, half at Class III or higher 7 + 1; 6 + 2; 5 + 3; 4 years + 4 years PHS (half at Class III or higher)
Grade IV Treatment HS plus at least 1 year PHS , 8 years, half at Class III or higher 6 + 2; 5 + 3; 4 + 4; or 3 years + a master's or doctorate (half at Class III or higher)
Key definitions:
One year of PHS education equals 45 CEUs, or 45 quarter or 30 semester credits in applied or technical sciences, which may be combined. DEQ counts it only in whole-year increments.
Operating experience means routine on-site performance of operator duties that affect system performance. Officials, managers and engineers whose duties do not include hands-on operation or on-site supervision do not earn it. Operator trainee or intern time can count for up to 100 percent, and part-time work can count.
Related experience may cover up to 50 percent of the requirement. Qualifying fields include the other wastewater specialty, water treatment, water distribution, laboratories, maintenance, pretreatment, industrial treatment, stormwater, and trades such as plumbing, pump mechanics and welding. It never reduces the Grade III or IV class-level minimums.
Important
DEQ warns applicants not to apply early. An applicant even one month short of the minimum may be approved for a different designation with other requirements.
Entry Paths: OIT, Provisional and SWWS
Path Who qualifies What happens
Operator-in-Training (OIT) Meets education but lacks experience; has completed or is enrolled in DEQ-approved training May take the SWWS, Grade I Treatment or Grade I Collection exam. After passing, recognized as an OIT for up to 36 months , then must file a post-exam application and fee once experience is met; otherwise the scores expire.
Grade I Provisional Currently gaining experience at a system; HS or GED; in or done with DEQ-approved training; supervised by a certified operator who signs an affidavit Receives a 12-month, non-renewable certificate without passing the exam and is enrolled for the Grade I exam with one year to test. A post-exam application follows after 12 months of experience.
SWWS certificate HS or GED plus 12 months at any class system (or 6 months with the degree option) Passes the single SWWS exam and may supervise a system designated as a Small Wastewater System.
DEQ-approved training for OIT and Provisional applicants includes the Sacramento State Operation of Wastewater Treatment Plants, Volume I (modules A-C), the WEF Wastewater Treatment Fundamentals I and II courses, Operation and Maintenance of Wastewater Collection Systems, Volume I , Small Wastewater System Operation and Maintenance, Volume I , and water technology programs at Clackamas and Umpqua community colleges.
Applying and Testing
Create a YDO account, submit the application with education documents, an experience affidavit and fees.
DEQ reviews eligibility, usually in about four weeks. An eligible applicant gets an email with instructions to self-schedule with PSI . Computer-based testing runs year-round, up to six days a week, and two exams may be scheduled on the same day.
Under the waiver provisions of OAR 340-049-0055(7), DEQ may also admit an applicant who will meet the education or experience requirement by the end of the fourth calendar month after the exam month. The certificate is withheld until proof arrives.
Exam format (WPI 2025 standardized exams, offered by DEQ since May 1, 2025):
Separate exams: SWWS, and Grades I-IV for Treatment and for Collection.
100 scored multiple-choice items plus up to 10 unscored pretest items scattered through the exam.
Three-hour, closed-book, computer-based test. A non-programmable calculator is allowed, and the WPI formula and conversion table is provided at the test site.
Results are reported as a scaled score , and 70 scaled points is passing. Scaling means the underlying raw cut can differ by exam form (DEQ's example: a Grade IV raw cut of 67 or a Grade I raw cut of 72 are both reported as 70).
Scoring is automatic and cannot be contested. The score report breaks results out by Need-to-Know content area.
Grade I and II Treatment and Collection exams are available in Spanish.
Retakes (OAR 340-049-0055): A failed candidate reapplies for re-examination with the fee. A person may not take the same type and grade exam more than twice in a twelve-month period unless they show specific education completed in the subject area. Anyone who does not apply for re-examination within one year of the initial exam must file a new exam application.
Fees (OAR 340-049-0065, Table B, effective July 1, 2026)
- Item Fee
- SWWS; Grade I or Provisional (treatment or collection) application $177
- Grade I or Provisional, treatment and collection $254
- Grade II / Grade III / Grade IV application $216 / $254 / $304
- Examination fee $127
- Re-examination or reschedule $304
- Post-examination application $62
- Reciprocity (Grade I / II / III / IV) $201 / $240 / $278 / $330
New and upgrade applications pay the application fee plus the exam fee. Table D raises fees again on July 1, 2027 (for example, the exam fee becomes $142). Most application fees are non-refundable.
Reciprocity
DEQ has no automatic exchange agreement with any state. An applicant with a valid certificate in good standing from another state or Canadian province, or a WPI Professional Operator certification, applies through YDO, attaches the certificate, and must meet Oregon's education and experience requirements. If the applicant passed a standardized ABC/WPI exam , DEQ can waive the exam at the same grade . If the out-of-state exam was state-specific , the waiver is at one grade lower than the corresponding Oregon grade.