Study guide
12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes
Oregon Water and Wastewater Operator Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification
1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees
2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal
2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates
3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins
3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)
4 Chapter 4: Source Water, Intakes and Wells
4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection
5 Chapter 5: Coagulation, Clarification and Filtration
5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration
6 Chapter 6: Drinking Water Disinfection
6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control
7 Chapter 7: Specialty Water Treatment and Residuals
7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate
8 Chapter 8: Distribution System Infrastructure
8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating
9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality
9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs
10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons
10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons
11 Chapter 11: Biological Wastewater Treatment
11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal
12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems
12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control
13 Chapter 13: Solids Handling and Biosolids
13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503
14 Chapter 14: Wastewater Collection Systems and Pumping
14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety
15 Chapter 15: Collection System Rehabilitation and Overflow Control
15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control
16 Chapter 16: Laboratory Procedures and Water Quality Testing
16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting
17 Chapter 17: Equipment, Electrical Systems and Maintenance
17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA
18 Chapter 18: Applied Water and Wastewater Mathematics
18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower
19 Chapter 19: Utility Safety
19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules
20 Chapter 20: Emergency Preparedness, Security and Utility Management
20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management
12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes
Key Takeaways Explain This Topic AI
Tertiary filters (sand, dual media, continuous-backwash upflow sand, cloth disks) polish secondary effluent solids and are often paired with metal-salt dosing for low phosphorus limits.
MBRs run submerged micro- or ultrafiltration membranes at high MLSS with air scour, relax and backwash cycles; fine screening ahead of them protects the membranes from hair and rags.
Oregon Class A recycled water must be filtered to an average of 2 NTU in 24 hours (no more than 5 NTU over 5 percent of the time, never above 10) and disinfected to a 7-day median of 2.2 total coliform per 100 mL.
Class B also meets 2.2/23 total coliform but needs no filtration; Class C meets a median of 23 and 240 in two consecutive samples; Class D meets E. coli limits of 126 (30-day log mean) and 406 per 100 mL.
Every recycled water program needs DEQ approval of a recycled water use plan and must observe the class's allowed uses, setbacks, signs and harvest restrictions.
Last updated: October 2026
Tertiary Filtration
Secondary clarifier effluent usually carries 5 to 20 mg/L of suspended solids. Tertiary filters remove much of that, along with the phosphorus and BOD bound to those particles.
Filter How it works Operating notes
Granular (sand or dual media) gravity filters Depth filtration through graded media; periodic backwash Watch headloss, effluent turbidity and backwash frequency; solids spikes from the clarifier shorten runs
Continuous-backwash upflow sand Influent rises through sand while an airlift continuously cleans and returns sand No shutdowns for backwash; check airlift operation and reject flow
Cloth disk (pile cloth) filters Water passes outside-in through cloth on rotating disks; vacuum shoes backwash sections Small footprint; watch cloth fouling, grease and solids carryover
Membrane filtration MF or UF of secondary effluent Highest solids removal; foundation for advanced reuse
Chemical phosphorus polishing : alum or ferric salts are dosed ahead of the filter, sometimes with a small flocculation zone, to precipitate soluble phosphorus. Dose by molar ratio and jar test, monitor alkalinity and pH, and expect more filter solids. DEQ's Table A rates activated sludge with tertiary filtration, including chemical phosphorus removal, as Class III up to 5 MGD.
Membrane Bioreactors (MBR)
An MBR replaces the secondary clarifier with membranes, usually submerged hollow fibers or flat sheets with micro- or ultrafiltration pores, drawing permeate under a slight vacuum.
High MLSS , often about 8,000 to 12,000 mg/L, in a small footprint.
Fine screening (typically 2 mm or finer) ahead of the MBR is essential. Hair and rags braid around fibers and destroy membranes.
Air scour continuously shakes solids off the membrane surface. Permeation cycles include short relax periods and backpulses .
Maintenance cleans use dilute sodium hypochlorite for organics and citric or other acids for scale. Periodic recovery cleans restore permeability.
Track transmembrane pressure (TMP) and permeability (flux per unit TMP). Falling permeability calls for cleaning or reduced flux.
Effluent turbidity is usually well under 1 NTU, an excellent base for Class A recycled water.
Oregon Recycled Water: OAR 340-055
Treated effluent that is suitable for a direct beneficial purpose is recycled water . DEQ permits its use through NPDES or WPCF permits and a DEQ-approved recycled water use plan . The producer must make sure users follow the rules, and users must use it only for the purposes allowed for its class.
Class Treatment Bacteria criteria Minimum monitoring Example uses (each class also allows the uses of the classes below it)
Nondisinfected Oxidized None Per permit Irrigation of fodder, fiber, seed crops not for human ingestion, commercial timber
Class D Oxidized and disinfected E. coli 30-day log mean ≤ 126 per 100 mL; no sample over 406 Weekly Firewood, ornamental nursery stock, Christmas trees, sod, pasture for animals
Class C Oxidized and disinfected Total coliform 7-day median ≤ 23 per 100 mL; ≤ 240 in any two consecutive samples Weekly Processed food crops; orchards and vineyards with direct-to-soil irrigation; golf courses, cemeteries, highway medians, campuses; listed industrial and construction uses; landscape impoundments
Class B Oxidized and disinfected Total coliform 7-day median ≤ 2.2 per 100 mL; no sample over 23 3 times per week Stand-alone fire suppression; non-residential toilet and urinal flushing; floor drain trap priming; restricted recreational impoundments
Class A Oxidized, filtered and disinfected Before disinfection: turbidity average ≤ 2 NTU in 24 hours, ≤ 5 NTU more than 5% of the time, never over 10 NTU. After: total coliform 7-day median ≤ 2.2, no sample over 23 Total coliform daily; turbidity hourly Any agricultural or horticultural irrigation; parks, playgrounds, school yards, residential landscapes; car washes and fountains; nonrestricted recreational impoundments; groundwater recharge under OAR 340-044
Setbacks and site management examples
- Requirement Nondisinfected Class D Class C Class B
- To a drinking water supply source 150 ft 100 ft 100 ft 50 ft
- Sprinkler irrigation to property line Sprinklers prohibited without DEQ approval 100 ft 70 ft 10 ft
- Spray near food service or drinking fountains n/a 70 ft 70 ft 10 ft
Nondisinfected water: no public access, and no irrigation for 30 days before harvest .
Class D: post signs around the irrigation site, keep dairy animals from direct contact, and stop irrigating fodder, sod, nursery stock and similar crops 3 days before harvest .
Class C and Class B: post signs at golf courses, cemeteries and impoundments, irrigate processed food crops no closer than 3 days before harvest, and keep edible orchard and vineyard crops off the ground.
Class A: no spray onto areas where food is prepared or served, or onto drinking fountains.
Recycled water pipes and appurtenances are color-coded purple and must never be cross-connected to potable water.