Study guide

10.3 Stabilization Ponds and Aerated Lagoons

Oregon Water and Wastewater Operator Certification Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Oregon Operator Programs and DEQ Wastewater Certification

1.1 Dual-Agency Structure: DEQ Wastewater and OHA Drinking Water Programs 1.2 DEQ Wastewater System Classification and Supervision Rules 1.3 DEQ Certificates: Qualifications, OIT, Provisional Path, Exams and Fees

2 Chapter 2: OHA Drinking Water Certification and Certificate Renewal

2.1 OHA System Classification, Direct Responsible Charge and the Filtration Endorsement 2.2 OHA Certificates: Experience Tables, OIT, Exams, Fees and Small Water System Certification 2.3 Renewal, CEUs, Reinstatement, Reciprocity and Discipline for DEQ and OHA Certificates

3 Chapter 3: Federal Rules, Oregon Water Quality Standards and Cyanotoxins

3.1 Clean Water Act, Safe Drinking Water Act & NPDES Permitting 3.2 Willamette Basin TMDL and Oregon Water Quality Standards 3.3 Harmful Algal Blooms (HABs) & Oregon Cyanotoxin Rules (OAR 333-061-0510)

4 Chapter 4: Source Water, Intakes and Wells

4.1 Raw Water Sources, Intake Structures & Pretreatment 4.2 Groundwater Sources and Wells: Hydraulics, Construction and Protection

5 Chapter 5: Coagulation, Clarification and Filtration

5.1 Coagulation, Flocculation & Jar Testing Dynamics 5.2 Sedimentation, Clarification & Media Filtration Systems 5.3 Slow Sand, Diatomaceous Earth, Cartridge and Membrane Filtration

6 Chapter 6: Drinking Water Disinfection

6.1 Disinfection Chemistry, Chlorination Dynamics & CT Calculations 6.2 UV, Ozone, Chlorine Dioxide, Chloramines and Disinfection Byproduct Control

7 Chapter 7: Specialty Water Treatment and Residuals

7.1 Iron and Manganese Removal, Softening, and Taste and Odor Control 7.2 Corrosion Control, Lead and Copper, and Fluoridation 7.3 Water Treatment Residuals: Sludge, Backwash Water and Membrane Concentrate

8 Chapter 8: Distribution System Infrastructure

8.1 Distribution System Hydraulics, Piping Materials & Storage Facilities 8.2 Valves, Fire Hydrants & Water Main Installation / Disinfection 8.3 Service Connections, Meters, Water Loss Control and Utility Locating

9 Chapter 9: Distribution Operations, Cross-Connection Control and Water Quality

9.1 Storage Tank and Booster Pump Station Operation, Inspection and Disinfection 9.2 Cross-Connection Control & Backflow Prevention Assemblies (OAR 333-061-0070) 9.3 Water Quality in Distribution: Water Age, Nitrification & Flushing Programs

10 Chapter 10: Wastewater Preliminary and Primary Treatment and Lagoons

10.1 Preliminary Treatment: Screening, Grit Removal & Flow Measurement 10.2 Primary Clarification & Sedimentation Hydraulics 10.3 Stabilization Ponds and Aerated Lagoons

11 Chapter 11: Biological Wastewater Treatment

11.1 Secondary Treatment: Activated Sludge Process Control & Variations 11.2 Fixed-Film Treatment: Trickling Filters, RBCs, MBBR and IFAS 11.3 Biological Nutrient Removal: Nitrification, Denitrification & Phosphorus Removal

12 Chapter 12: Tertiary Treatment, Disinfection, Recycled Water and Small Systems

12.1 Tertiary Filtration, Membrane Bioreactors and Oregon Recycled Water Classes 12.2 Wastewater Disinfection and Dechlorination 12.3 Small Wastewater Systems, Septage Handling and Odor Control

13 Chapter 13: Solids Handling and Biosolids

13.1 Sludge Thickening, Conditioning & Dewatering Technologies 13.2 Anaerobic and Aerobic Digestion Operations & Control 13.3 Biosolids Quality, Land Application Rules & OAR 340-050 / 40 CFR 503

14 Chapter 14: Wastewater Collection Systems and Pumping

14.1 Gravity Sewer Design, Manholes & Inflow/Infiltration (I/I) Management 14.2 Lift Station Design, Wet Wells & Submersible / Centrifugal Pumps 14.3 Collection System Maintenance, Pipeline Inspection (CCTV) & Trench Safety

15 Chapter 15: Collection System Rehabilitation and Overflow Control

15.1 Sewer Rehabilitation, Trenchless Renewal and New-Pipe Acceptance Testing 15.2 Overflow Response, Bypass Pumping, CMOM Programs and Sewer Sulfide Control

16 Chapter 16: Laboratory Procedures and Water Quality Testing

16.1 Drinking Water Microbiological Testing: Coliform, E. coli & RTCR 16.2 Wastewater Lab Analysis: BOD5, TSS, COD & Volatile Solids 16.3 Wastewater Lab: Nutrients, Alkalinity, Bacteria, Toxicity Testing and Lab Accreditation 16.4 Process Monitoring: pH, Turbidity, Dissolved Oxygen & Chlorine Residuals 16.5 Sampling Protocols, Quality Assurance / Chain of Custody & Reporting

17 Chapter 17: Equipment, Electrical Systems and Maintenance

17.1 Pumps, Blowers and Mechanical Maintenance Programs 17.2 Electrical Systems, Motors, Generators, Instrumentation and SCADA

18 Chapter 18: Applied Water and Wastewater Mathematics

18.1 Dimensional Analysis, Flow Conversions & Detention Time 18.2 Chemical Feed, Dosage Calculations & the Pounds Formula 18.3 Treatment Plant Hydraulics, Loading Rates (SOR, WOR) & Pumping Horsepower

19 Chapter 19: Utility Safety

19.1 OSHA Standards, Confined Space Entry & Hazardous Chemical Safety 19.2 Field Safety: Electrical Hazards, Fall Protection, Work Zones, PPE and Oregon OSHA Rules

20 Chapter 20: Emergency Preparedness, Security and Utility Management

20.1 Cascadia Subduction Zone (CSZ) Seismic Preparedness & Infrastructure Hardening 20.2 Wildfire Impacts on Watersheds, Post-Fire Water Quality & Emergency Operations 20.3 Security, Cybersecurity, Emergency Response Planning and Utility Management

10.3 Stabilization Ponds and Aerated Lagoons

Key Takeaways Explain This Topic AI

Facultative ponds have an aerobic upper layer, where algae supply oxygen to bacteria, over an anaerobic sludge layer, so dissolved oxygen and pH peak in the afternoon and fall by dawn.

Organic loading is pounds of BOD per acre per day; detention time is pond volume divided by flow, with 1 acre-foot equal to about 325,851 gallons.

Bright green water is healthy; blue-green suggests cyanobacteria; gray or black means septic, overloaded conditions; pink or red indicates purple sulfur bacteria and anaerobic stress.

Keep operating depth high enough to block emergent weeds, control burrowing animals, and maintain dikes, inlets and outlets to prevent short-circuiting.

Algae can push effluent suspended solids above secondary limits, so federal rules let states set alternative TSS limits for small stabilization ponds.

Last updated: October 2026

Where Lagoons Fit

Waste stabilization ponds are shallow earthen basins that treat wastewater with sunlight, algae and bacteria and very little equipment. In DEQ's Table A, a non-aerated lagoon is Class I at any flow, and an aerated lagoon is Class I up to 1 MGD and Class II above it. Many Oregon systems store lagoon effluent in winter and irrigate in summer under WPCF permits, or discharge only during high-flow seasons under NPDES permits.

Types of Ponds

Type How it works Typical depth Notes

Facultative Aerobic upper zone (algae and bacteria), facultative middle, anaerobic bottom sludge about 3-6 ft The most common small-town pond; long detention times

Aerated (partial mix) Mechanical or diffused aeration supplies oxygen; algae still present 8-15 ft Smaller footprint, more power

  • Aerated (complete mix) Enough mixing to keep solids suspended 10-15 ft Needs a settling cell afterward
  • Anaerobic Heavily loaded, little oxygen deep Used for strong industrial wastes; odor risk
  • Polishing or maturation Low-load final cells shallow Lowers BOD, TSS and pathogens before discharge
  • The Algae-Bacteria Partnership

Bacteria break down organic matter and release carbon dioxide and nutrients. Algae use CO2, sunlight and nutrients to grow and release oxygen , which bacteria then use. That creates a strong daily (diurnal) cycle :

Afternoon : photosynthesis peaks. Dissolved oxygen may be supersaturated, and pH can rise above 9 as algae strip CO2.

Night to dawn : respiration exceeds photosynthesis. DO and pH reach their lowest levels just before sunrise.

The swing is normal. A pond that stays at low DO through the afternoon is overloaded or short of algae. Seasonal turnover in spring and fall can mix bottom sludge upward and cause temporary odors.

Loading and Detention Math

Organic loading Loading (lb BOD/acre/day) = Flow (MGD) × BOD (mg/L) × 8.34 Pond area (acres) \text{Loading (lb BOD/acre/day)} = \frac{\text{Flow (MGD)} \times \text{BOD (mg/L)} \times 8.34}{\text{Pond area (acres)}} Loading (lb BOD/acre/day) = Pond area (acres) Flow (MGD) × BOD (mg/L) × 8.34 ​

Facultative ponds are commonly designed for roughly 15-35 lb BOD per acre per day, depending on climate.

Example. A town sends 0.25 MGD at 200 mg/L BOD to 15 acres of primary ponds.

  • BOD load = 0.25 × 200 × 8.34 = 417 lb/day
  • Loading = 417 ÷ 15 = 27.8 lb BOD/acre/day
  • Detention time

1 acre = 43,560 sq ft, and 1 acre-foot = 43,560 cu ft × 7.48 ≈ 325,851 gallons .

Example. Fifteen acres at 5 ft depth holds 75 acre-feet, or about 24.4 MG. At 0.25 MGD the detention time is 24.4 ÷ 0.25 ≈ 98 days .

Reading a Pond

  • Observation Likely meaning Response
  • Bright green, DO high in afternoon Healthy algae population Keep routine monitoring

Blue-green scum, paint-like streaks Cyanobacteria bloom Check for toxins near recreational or drinking water use; review nutrients and detention

Gray or black, sewage or H2S odor Septic and overloaded Reduce load, switch cell order, add aeration or recirculation

  • Pink or red Purple sulfur bacteria, anaerobic Investigate overloading and sludge depth
  • Brown with floating mats Sludge rising, turnover Break up mats; plan sludge removal

Clear water with little algae Toxic slug, grazing zooplankton (daphnia) or very cold weather Check influent, DO and pH trends

Routine Operation and Maintenance

Depth control : keep water deep enough (often at least 2 to 3 feet) so cattails and tules cannot root. Emergent weeds create mosquito habitat and short-circuit flow.

Dike care : mow or graze grass, repair erosion and wave-cut damage, use riprap where needed, and trap muskrats, nutria and other burrowing animals that tunnel through dikes.

Inlets and outlets : clear debris, adjust weirs and change cell sequence (series or parallel) by season to balance load.

Sludge : measure the sludge blanket with a sludge judge or core sampler. Plan removal before sludge cuts volume enough to lower detention time and raise odors.

Seepage and liners : watch for unexplained level losses. Seepage can violate groundwater protection requirements.

Records : pond levels, DO, pH, temperature, flows, color observations and maintenance.

Effluent Challenges

TSS from algae : algae cells leaving the last cell count as suspended solids. Federal rules (40 CFR 133.103) let states set adjusted TSS limits for small waste stabilization ponds. Operators also use draw-off below the surface, intermittent sand filters, rock filters or chemical treatment.

Ammonia and nutrients : nitrification slows sharply in cold water, so winter ammonia removal is limited.

Disinfection : algae shield bacteria from UV and exert chlorine demand. Lagoon effluent often needs filtration or higher doses, and dechlorination afterward.

Seasonal discharge or reuse : storage lagoons let a town avoid summer discharges. Stored water used for irrigation must meet the applicable recycled water class.

Sludge Depth Checks

Settled solids build up slowly in pond bottoms, especially near the inlet. Measure sludge depth at least yearly at a grid of points from a boat, using a sludge judge or a white towel on a pole that shows the blanket line. Plot the results. Sludge accumulating near the inlet, a rising blanket or shrinking clear-water depth means removal is coming. Plan removal, by dredging or by draining and drying a cell, before solids cut detention time and start showing up as effluent TSS. Removed pond sludge is a biosolid and is managed under the Oregon biosolids rules.