Study guide
7.4 Duties of Authorized Entrants, Attendants & Entry Supervisors
OSHA 30-Hour Construction Safety Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Safety Management, Regulatory Framework & Worker Rights
1.1 OSHA Regulatory Structure, OSH Act, General Duty Clause & Worker Rights 1.2 Safety Management Systems (SMS) & Safety Culture Leadership 1.3 Leading vs. Lagging Indicators, Safety Metrics & Recordkeeping (OSHA 300/300A/301) 1.4 Multi-Employer Worksite Citation Policy & Subcontractor Safety Oversight 1.5 Job Hazard Analysis (JHA/JSA), Hierarchy of Controls & Site-Specific Safety Plans (SSSP)
2 Chapter 2: Fall Protection Systems & Working at Heights
2.1 Fall Hazards, 6-Foot Rule & 29 CFR 1926 Subpart M Scope 2.2 Guardrail Systems, Safety Net Systems & Hole Covers 2.3 Personal Fall Arrest Systems (PFAS), Anchorages & Fall Clearance Calculations 2.4 Controlled Access Zones, Safety Monitoring Systems & Leading Edge Work 2.5 Stairways, Ladders & Access Systems (29 CFR 1926 Subpart X)
3 Chapter 3: Electrical Safety, Grounding & Energy Control
3.1 Electrical Hazards, Electrocution Dynamics & 29 CFR 1926 Subpart K 3.2 Ground Fault Circuit Interrupters (GFCI) & Assured Equipment Grounding Conductor Program (AEGCP) 3.3 Overhead Power Line Clearances & Encroachment Prevention 3.4 Lockout/Tagout (LOTO), De-energization & Hazardous Energy Control 3.5 Arc Flash Hazards, PPE Requirements & Qualified Worker Distinctions
4 Chapter 4: Scaffolding Systems & Aerial Lifts
4.1 Scaffold Classifications, Load Capacities & Subpart L General Requirements 4.2 Supported Scaffolds: Foundations, Planking, Bracing, Tie-ins & Erection 4.3 Suspended Scaffolds, Two-Point Swings & Rigging Counterweights 4.4 Aerial Lifts, Scissor Lifts & Mobile Elevated Work Platforms (MEWPs) 4.5 Competent Person Scaffold Inspection, Fall Protection & Access Rules
5 Chapter 5: Excavation, Trenching & Shoring Safety
5.1 Excavation Hazards, Soil Mechanics & Subpart P Scope 5.2 OSHA Soil Classification: Visual and Manual Field Testing (Types A, B, C) 5.3 Protective Systems: Sloping and Benching Ratios 5.4 Protective Systems: Hydraulic Shoring, Trench Boxes & Shields 5.5 Excavation Access/Egress, Hazardous Atmospheres & Competent Person Daily Inspections
6 Chapter 6: Cranes, Derricks, Hoists & Rigging
6.1 Subpart CC Scope, Operator Certification & Qualification Requirements 6.2 Crane Setup, Ground Conditions, Outriggers & Power Line Safety 6.3 Load Charts, Capacity Calculations & Lift Planning 6.4 Critical Lift Planning, Tandem Lifts & Personnel Hoisting 6.5 Rigging Hardware, Sling Angles, Hitches & Signal Person Qualifications
7 Chapter 7: Confined Spaces in Construction
7.1 29 CFR 1926 Subpart AA Scope & Confined Space vs. Permit-Required Confined Space (PRCS) 7.2 Atmospheric Testing: Sequential Order (O2, Flammability, Toxicity) & Calibration 7.3 PRCS Entry Permit Program, Isolation & Ventilation 7.4 Duties of Authorized Entrants, Attendants & Entry Supervisors 7.5 Non-Entry vs. Entry Rescue, Emergency Services & Retrieval Systems
8 Chapter 8: Incident Investigation, Root Cause Analysis & Prevention
8.1 Purpose of Incident Investigation & Blame-Free Reporting Culture 8.2 Immediate Response, Scene Security, Evidence Gathering & Witness Interviewing 8.3 Root Cause Analysis Methodologies: 5 Whys, Fishbone (Ishikawa), and Fault Tree 8.4 Human Factors, Swiss Cheese Model & Latent Organizational Failures 8.5 Corrective Action Plans, Hierarchy of Controls Application & Near-Miss Trending
9 Chapter 9: Occupational Health Hazards & Environmental Protection
9.1 Hazard Communication Standard (HazCom 2012 / GHS) & 16-Section Safety Data Sheets (SDSs) 9.2 Respirable Crystalline Silica (29 CFR 1926.1153) & Table 1 Control Methods 9.3 Lead & Asbestos Hazards in Construction Demolition and Renovation (29 CFR 1926.62 / 1926.1101) 9.4 Occupational Noise Exposure, Action Levels, PELs & Hearing Conservation Programs (Subpart D) 9.5 Thermal Stress (Heat Illness & Cold Injury Prevention) & Biological/Chemical Hazards
10 Chapter 10: Ergonomics, Material Handling & Tool Safety
10.1 Ergonomic Risk Factors in Construction & Musculoskeletal Disorders (MSDs) 10.2 Manual Material Handling, Safe Lifting Principles & Ergonomic Engineering Solutions 10.3 Hand-Arm Vibration Syndrome (HAVS), Whole-Body Vibration & Power Tool Safety (Subpart I) 10.4 Material Storage, Rigging Safety, Housekeeping & Disposal (29 CFR 1926 Subpart H) 10.5 Motor Vehicles, Heavy Equipment, Highway Work Zone Safety & Struck-By Prevention (Subpart O/G)
11 Chapter 11: Personal Protective and Life-Saving Equipment (29 CFR 1926 Subpart E)
11.1 PPE Programs, Hazard Assessment, the Proper-Fit Rule & Employer Payment 11.2 Head, Eye, and Face Protection (1926.100 / 1926.102) 11.3 Hearing, Hand, Foot, and Body Protection (1926.101 / 1926.95 / 1926.96) 11.4 Respiratory Protection: Program, Selection, Medical Evaluation & Fit Testing (1926.103)
12 Chapter 12: Struck-By and Caught-In/Between Focus Four Hazards
12.1 Struck-By Hazards: Flying, Falling, Swinging & Rolling Objects 12.2 Caught-In/Between Hazards, Machine Guarding & Rollover Protection 12.3 Powered Industrial Trucks, Telehandlers & Rough-Terrain Forklifts (1926.602)
13 Chapter 13: Concrete, Masonry & Steel Erection (Subparts Q and R)
13.1 Cast-in-Place Concrete, Formwork, Shoring & Rebar Impalement (Subpart Q) 13.2 Masonry Construction, Limited Access Zones & Precast/Tilt-Up Panels (Subpart Q) 13.3 Steel Erection: Column Anchorage, Connectors, Decking & the CDZ (Subpart R)
14 Chapter 14: Fire Prevention, Welding & Cutting, and Demolition (Subparts F, J, T)
14.1 Fire Protection and Prevention (29 CFR 1926 Subpart F) 14.2 Welding, Cutting & Hot Work (29 CFR 1926 Subpart J) 14.3 Demolition: Engineering Surveys & Sequenced Removal (29 CFR 1926 Subpart T)
15 Chapter 15: Emergency Preparedness, Site Welfare & Safety Leadership
15.1 Emergency Action Plans, Medical Services, First Aid & Sanitation (1926.35 / .50 / .51) 15.2 Foundations for Safety Leadership & the OSHA Outreach Card
7.4 Duties of Authorized Entrants, Attendants & Entry Supervisors
Key Takeaways Explain This Topic AI
OSHA 29 CFR 1926 Subpart AA establishes distinct, legally enforceable duties for three specific jobsite roles: Entry Supervisor, Confined Space Attendant, and Authorized Entrant.
The Entry Supervisor verifies that all permit conditions, tests, and isolation measures are complete, authorizes entry by signing the permit, and terminates the permit when operations conclude or hazards arise.
The Confined Space Attendant must remain stationed outside the portal until relieved by another attendant, maintain an exact headcount and communication with entrants, monitor conditions, and summon rescue.
Authorized Entrants must recognize hazard signs and symptoms, properly use PPE and retrieval gear, maintain communication with the attendant, and evacuate immediately upon order, alarm, or symptom detection.
Comprehensive training must be provided before initial assignment, when duties change, or when program deficiencies occur, documented with written certificates containing worker name, trainer signature, and date.
Last updated: November 2026
7.4 Duties of Authorized Entrants, Attendants & Entry Supervisors
Confined space safety operates on a foundation of strict role division and disciplined oversight. On construction sites, safety failures rarely stem from equipment breakdowns alone; they occur when jobsite personnel misunderstand their assigned responsibilities, abandon their stations, or fail to communicate hazard warnings. To prevent human error and establish clear chains of accountability, 29 CFR 1926 Subpart AA (§§ 1926.1207 – 1926.1210) defines the precise legal duties for three distinct operational roles: Entry Supervisors , Confined Space Attendants , and Authorized Entrants .
Every safety manager, project superintendent, and trade foreman preparing for the OSHA 30-Hour Construction credential must master these specific duties, understand the critical non-entry mandate for attendants, and know the mandatory training certification requirements.
- 1. The Triad of Confined Space Roles ┌─────────────────────────────────────────────────────────────┐
- │ The Triad of OSHA Subpart AA Confined Space Roles │
- ├─────────────────────────────────────────────────────────────┤
- │ ENTRY SUPERVISOR (§ 1926.1210) │
- │ • Authorizes entry & signs permit. │
- │ • Verifies isolation, testing, and rescue availability. │
- │ • Terminates permit upon completion or hazard emergence. │
- ├─────────────────────────────────────────────────────────────┤
- │ │ │
- │ ▼ │
- ├─────────────────────────────────────────────────────────────┤
- │ CONFINED SPACE ATTENDANT (§ 1926.1209) │
- │ • Stationed OUTSIDE the portal at all times. │
- │ • Maintains continuous headcount & communication. │
- │ • Monitors conditions inside and outside the space. │
- │ • Summons emergency rescue services. │
- │ • NEVER enters the space for rescue (Non-Entry Mandate). │
- ├─────────────────────────────────────────────────────────────┤
- │ │ │
- │ ▼ │
- ├─────────────────────────────────────────────────────────────┤
- │ AUTHORIZED ENTRANT (§ 1926.1208) │
- │ • Knows hazards, exposure symptoms, and consequences. │
- │ • Correctly uses PPE, gas monitors, and retrieval gear. │
- │ • Communicates status continuously with attendant. │
- │ • Evacuates immediately upon alarm, order, or symptoms. │
- └─────────────────────────────────────────────────────────────┘
- 2. Duties of the Entry Supervisor (29 CFR 1926.1210)
The Entry Supervisor is the designated employer representative responsible for determining that acceptable entry conditions exist, authorizing entry, overseeing operations, and terminating the permit.
Core Responsibilities
Hazard Awareness: Understands all potential space hazards, including the mode of exposure, physical signs and symptoms, and toxicological consequences.
Permit Verification: Verifies that all atmospheric tests have been conducted, acceptable entry parameters are met, and all isolation (LOTO, blinding) and ventilation measures are operational before signing the permit.
Authorization: Formally signs the entry permit to authorize entry.
Rescue Service Verification: Confirms that designated rescue services are on alert, operable, and capable of responding in a timely manner, and that the means to summon them (radios, phones) are fully functional.
Security & Perimeter Control: Removes unauthorized individuals who enter or attempt to enter the permit space.
Continuous Compliance Assessment: Determines at appropriate intervals that operations remain consistent with permit terms.
Permit Termination (§ 1926.1210(b)): Terminates entry and cancels the permit whenever operations are completed or whenever a prohibited condition arises.
Note
Dual Role Allowance: Under § 1926.1210(d), an Entry Supervisor may also serve as an Attendant or Authorized Entrant, provided they are fully trained and equipped for each role. However, serving as an entrant must never compromise the supervisor's ability to oversee overall site safety.
3. Duties of the Confined Space Attendant (29 CFR 1926.1209)
The Attendant is stationed outside the permit space entry portal and serves as the dedicated safety sentinel for entrants inside.
Core Responsibilities
Continuous Portal Stationing: Remains stationed outside the entry portal at all times during entry operations. The attendant must never leave their post for any reason unless relieved by another fully qualified attendant.
Headcount and Entrant Tracking: Maintains an exact, continuous headcount and tracks the specific identities of all authorized entrants currently inside the space.
Continuous Communication: Maintains continuous, effective communication with all entrants via voice, visual contact, two-way radios, or rope pull signals to assess entrant well-being.
Hazard and Behavioral Monitoring: Monitors activities inside and outside the space to determine if it is safe for entrants. The attendant watches for behavioral signs of exposure among entrants (e.g., euphoria, slurred speech, confusion, clumsiness) and external site hazards (e.g., shifting wind blowing generator exhaust toward the air intake, vehicle traffic encroachment).
Emergency Summoning: Summons emergency rescue services immediately upon detecting an emergency or recognizing that entrants need assistance.
Ordering Immediate Evacuation: Orders entrants to evacuate the space immediately whenever:
- A prohibited condition is detected;
- Behavioral effects of toxic exposure or oxygen deficiency appear;
- A situation outside the space threatens entrant safety;
- The attendant cannot perform all required duties safely; or
An atmospheric alarm sounds.
Operating Non-Entry Retrieval Equipment: Operates the surface mechanical retrieval winch/tripod to extract an incapacitated entrant without entering the space.
Caution
The Non-Entry Rescue Default: Under 29 CFR 1926.1209(d) , an attendant stays outside until relieved by another attendant . A relieved attendant may enter for rescue only if the program allows it and the attendant is trained and equipped. NIOSH estimated that about one in four confined-space deaths were would-be rescuers—mostly coworkers who panicked and entered the space, only to be overcome by the same invisible atmospheric hazard within seconds. An attendant may enter only if formally relieved by another qualified attendant AND if fully trained, equipped with positive-pressure SCBA, and authorized for entry rescue.
Attending Multiple Spaces (§ 1926.1209(k))
An attendant may monitor more than one permit space simultaneously only if the employer's written permit program specifies precise procedures and the attendant can successfully perform all mandatory duties (headcount, communication, hazard monitoring, rescue summoning) for each space without compromising safety. If an emergency occurs in one space, the attendant must be able to manage the response without neglecting the other spaces.
4. Duties of the Authorized Entrant (29 CFR 1926.1208)
An Authorized Entrant is an employee who is formally authorized by the employer to enter a permit space to perform assigned work.
Core Responsibilities
Hazard Knowledge: Must know and understand the specific hazards that may be encountered during entry, including exposure routes, signs, symptoms, and medical consequences.
Proper Equipment Usage: Properly inspects, tests, and uses all required equipment, including: direct-reading multi-gas monitors, full-body retrieval harnesses, personal protective equipment (gloves, coveralls, eye protection), explosion-proof portable lighting, and communication devices.
Continuous Communication: Communicates regularly with the attendant to enable the attendant to assess entrant status and maintain situational awareness.
Alerting the Attendant: Immediately alerts the attendant whenever the entrant recognizes any warning signs or symptoms of exposure (dizziness, nausea, shortness of breath, unusual odors) or detects a prohibited condition.
Immediate Evacuation: Exits the space as rapidly as possible whenever:
- An order to evacuate is issued by the Attendant or Entry Supervisor;
- An evacuation alarm (audible/visual meter alarm) sounds;
- The entrant recognizes physical symptoms of toxic exposure or oxygen deficiency; or
The entrant detects an uncontrolled hazard or prohibited condition.
5. Comprehensive Training & Certification Requirements (29 CFR 1926.1207)
Employers must provide comprehensive training to all employees involved in confined space operations to ensure they acquire the understanding, knowledge, and operational skills necessary to perform their assigned duties safely. ┌─────────────────────────────────────────────────────────────┐
- │ Mandatory OSHA Confined Space Training Triggers │
- ├─────────────────────────────────────────────────────────────┤
- │ 1. BEFORE an employee is first assigned to PRCS duties. │
- │ 2. BEFORE a change in an employee's assigned duties. │
- │ 3. WHENEVER space operations present new hazards not │
- │ previously covered in training. │
- │ 4. WHENEVER the employer identifies inadequacies or devia- │
- │ tions in employee knowledge or performance. │
- └─────────────────────────────────────────────────────────────┘
- Training Documentation and Certification (§ 1926.1207(d))
The employer must verify that training has been completed through a written certification record containing:
- Each employee's full legal name;
- The printed name and signature of the qualified trainer;
The specific date(s) of completed training.
This certification must be maintained on file and made immediately available for review by employees, their authorized representatives, and OSHA compliance officers.
Practical Field Scenario: The Abandoned Portal Incident
A construction contractor was rehabilitating an underground stormwater junction chamber. The entry supervisor conducted pre-entry tests, signed the permit, and assigned a laborer as the dedicated Attendant. Two pipefitters entered the 14-foot-deep chamber with full-body harnesses attached to a tripod retrieval line.
Forty-five minutes into the shift, the project superintendent called the Attendant over to help unload a flatbed delivery of rebar 150 feet away. The Attendant left his station, assuming the workers "would be fine for five minutes."
While the Attendant was gone, a gasoline-powered water pump operating nearby shifted in the wind, discharging Carbon Monoxide directly into the chamber. Both pipefitters became disoriented and collapsed.
When the Attendant returned 12 minutes later, he looked down and saw both workers unconscious. In a panic, he jumped down into the chamber without a respirator to pull them out and collapsed immediately.
Outcome: Three fatalities. The root causes were clear: the Attendant abandoned his portal station, the superintendent ordered a safety violation, and the Attendant left the post without being relieved.
Common Exam Traps & Pitfalls
Trap 1: Believing the Attendant May Enter for an Immediate Rescue. An attendant is strictly prohibited from entering a permit space to attempt rescue unless formally relieved by another qualified attendant AND properly equipped with SCBA/retrieval gear.
Trap 2: Assigning the Attendant Additional Unrelated Tasks. An attendant cannot be assigned tasks (like material handling, sawing, or running errands) that distract from continuous entrant monitoring and portal oversight.
Trap 3: Permitting Entry Supervisors to Bypass Written Permits. No matter how urgent the repair, an Entry Supervisor cannot authorize entry verbally; a signed, written permit must be posted at the portal.
Trap 4: Assuming Training Never Needs Updating. Retraining is mandatory whenever operations change, new hazards emerge, or an employee demonstrates a lack of proficiency or compliance deviation.