Study guide

7.1 Permit-Required Confined Spaces (29 CFR 1910.146)

OSHA 30-Hour General Industry Safety & Health Training Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Course Introduction & Overview

1.1 About the OSHA 30-Hour General Industry Card 1.2 Course Structure & Study Strategy

2 Chapter 2: Safety Management & OSHA Regulatory Framework

2.1 OSH Act, General Duty Clause & Worker Rights 2.2 OSHA Inspections, Citations & Penalties 2.3 Injury & Illness Recordkeeping (29 CFR 1904) 2.4 Managing Safety & Health Programs

3 Chapter 3: Hazard Communication & Chemical Hazards

3.1 Hazard Communication Standard (29 CFR 1910.1200) & GHS 3.2 Safety Data Sheets (SDS) & Container Labeling 3.3 Industrial Hygiene & Chemical Hazards

4 Chapter 4: Walking-Working Surfaces & Fire Protection

4.1 Walking-Working Surfaces & Housekeeping (29 CFR 1910.22) 4.2 Ladders, Stairways & Scaffolds (29 CFR 1910.23) 4.3 Fall Protection Systems & Criteria (29 CFR 1910.28-30) 4.4 Exit Routes, Emergency Action Plans & Fire Protection (29 CFR 1910.34-39)

5 Chapter 5: Personal Protective Equipment & Respiratory Protection

5.1 PPE Hazard Assessment & Selection (29 CFR 1910.132) 5.2 Head, Eye, Face, Hand & Foot Protection (29 CFR 1910.133-138) 5.3 Respiratory Protection Programs & Fit Testing (29 CFR 1910.134)

6 Chapter 6: Electrical Safety & Lockout/Tagout (LOTO)

6.1 Electrical Hazard Recognition & Grounding (29 CFR 1910.301-308) 6.2 Safe Work Practices & GFCI Requirements 6.3 Lockout/Tagout (LOTO) Energy Control (29 CFR 1910.147)

7 Chapter 7: Confined Spaces, Machine Guarding & Hot Work

7.1 Permit-Required Confined Spaces (29 CFR 1910.146) 7.2 Confined Space Atmosphere Testing & Entry Roles 7.3 Machine Guarding Principles & Guard Types (29 CFR 1910.211-219) 7.4 Welding, Cutting & Brazing — Hot Work Safety (29 CFR 1910.251-255)

8 Chapter 8: Materials Handling, Forklifts & Ergonomics

8.1 Materials Handling, Storage & Sling Safety (29 CFR 1910.176-184) 8.2 Powered Industrial Trucks (Forklifts) (29 CFR 1910.178) 8.3 Ergonomics & MSD Risk Factors

9 Chapter 9: Specialized Health Hazards & Process Safety

9.1 Bloodborne Pathogens Exposure Control (29 CFR 1910.1030) 9.2 Process Safety Management (PSM) (29 CFR 1910.119) 9.3 Hazardous Materials & Compressed Gases (29 CFR 1910.101-110)

7.1 Permit-Required Confined Spaces (29 CFR 1910.146)

Key Takeaways Explain This Topic AI

A confined space is defined by a three-part test: bodily enterable, limited entry/exit, and not designed for continuous occupancy.

A permit-required confined space (PRCS) contains or has potential for hazardous atmospheres, engulfment, entrapment, or other recognized serious hazards.

Reclassification under 1910.146(c)(7) is only allowed if all atmospheric and physical hazards are completely eliminated, not merely controlled.

Alternate entry procedures under 1910.146(c)(5) allow bypassing full permit requirements if a controlled atmospheric hazard is the sole hazard.

Last updated: July 2026

Permit-Required Confined Spaces (29 CFR 1910.146)

Confined spaces present some of the most dangerous working conditions in general industry. Because these areas are not designed for continuous human occupancy, they often accumulate hazardous atmospheres or harbor physical dangers that can rapidly incapacitate or kill an untrained worker. OSHA regulates these environments under 29 CFR 1910.146, which establishes the criteria for identifying confined spaces and defines the strict safety management controls required for permit-required confined spaces (PRCS).

The OSHA Three-Part Confined Space Test

For a workspace to be classified as a confined space, it must meet all three of the following criteria. If any single criterion is not met, the space is not considered a confined space under 29 CFR 1910.146:

Bodily Enterable: The space must be large enough and so configured that an employee can bodily enter it (entire torso and limbs) to perform assigned work. If a worker can only reach in with their arm or head, it does not meet this threshold.

Limited or Restricted Entry/Exit: The space has limited or restricted means for entry or exit. Examples include tanks, vessels, silos, storage bins, hoppers, vaults, pits, and sewers. Access to these spaces is typically restricted by ladders, narrow portals, hatches, or long travel distances that make escape difficult in an emergency.

Not Designed for Continuous Occupancy: The space is not designed for continuous employee occupancy. These areas are engineered to store products, house machinery, or serve temporary industrial purposes, rather than provide a safe, habitable environment for continuous work.

What Makes a Confined Space "Permit-Required"?

A permit-required confined space (PRCS) is a confined space that contains, or has the potential to contain, one or more serious safety or health hazards. Under OSHA standards, a confined space is classified as a permit space if it has one or more of the following four characteristics:

Hazardous Atmosphere: The space contains or has a potential to contain a hazardous atmosphere. This includes air that is oxygen-deficient (<19.5%), oxygen-enriched (>23.5%), flammable (>10% of the Lower Explosive Limit), or contains toxic substances exceeding OSHA Permissible Exposure Limits (PELs).

Engulfment Hazard: The space contains a material that has the potential to engulf an entrant. Engulfment is the surrounding and effective capture of a person by a liquid or finely divided solid substance (such as water, chemical solutions, grain, sand, coal, or sawdust) that can be inhaled to cause death by aspiration or can exert enough physical force on the body to cause suffocation or crushing injuries.

Entrapment Hazard: The space has an internal configuration such that an entrant could be trapped or asphyxiated by inwardly converging walls or by a floor which slopes downward and tapers to a smaller cross-section. Hoppers, chutes, and storage bins often have tapering bottom cones that can funnel a worker into a tight space, trapping them and compressing their chest.

Other Recognized Serious Hazards: The space contains any other recognized serious safety or health hazard. This category is a catch-all for physical dangers, including exposed energized electrical parts, unguarded rotating machinery (such as mixers, augers, or agitators), extreme thermal hazards (steam lines or freezing temperatures), biological hazards, or fall hazards.

Comparing Confined Space Classifications

Space Type Bodily Enterable? Limited Entry/Exit? Not for Continuous Occupancy? Contains Hazards? Written Permit Required?

  • Non-Confined Space Varies No No Varies No
  • Non-Permit Confined Space Yes Yes Yes No No
  • Permit-Required Confined Space (PRCS) Yes Yes Yes Yes Yes
  • Hazard Elimination and Space Reclassification (29 CFR 1910.146(c)(7))

Employers are permitted to temporarily reclassify a permit-required confined space as a non-permit confined space, but only under highly restrictive conditions. Under 29 CFR 1910.146(c)(7), a space can be reclassified if:

The space poses no actual or potential atmospheric hazards.

All hazards within the space are completely eliminated without entering the space.

It is critical to distinguish between hazard elimination and hazard control . Elimination means the hazard is physically removed or isolated so it no longer exists. Examples include executing Lockout/Tagout (LOTO) on all electrical and mechanical systems, inserting physical blanks or blinds in piping systems (blanking/blinding), or disconnecting mechanical linkages.

In contrast, control measures, such as using continuous forced-air ventilation to dilute toxic gases or wearing personal protective equipment (PPE), do not eliminate the hazard—they merely manage it. If ventilation or PPE is required to keep the space safe, the hazard still exists, and the space cannot be reclassified as a non-permit space. The employer must document the reclassification through a written certification containing the date, the location of the space, and the signature of the person making the determination. This certification must be made available to all entering employees.

Alternate Entry Procedures (29 CFR 1910.146(c)(5))

If an employer cannot completely eliminate all hazards, they may still be able to bypass the full permit system using alternate entry procedures under 29 CFR 1910.146(c)(5). This simplified protocol is allowed only if:

The employer can demonstrate that the only hazard in the space is an actual or potential hazardous atmosphere.

The employer can demonstrate that continuous forced-air ventilation alone is sufficient to maintain the permit space safe for entry.

The employer develops monitoring and inspection data to support these demonstrations.

Under alternate entry, the employer must test the atmosphere before entry and continuously ventilate the space. Crucially, the employer is exempt from the requirements of maintaining a standby attendant, an entry supervisor, a written permit, and a rescue team. If an atmospheric hazard is detected during entry, the work must stop immediately, the space must be evacuated, and the employer must re-evaluate the space.

Written PRCS Programs and Enforcement

For spaces that cannot be reclassified or entered under alternate procedures, employers must implement a comprehensive written PRCS program. This program must identify permit spaces, prevent unauthorized entry, train employees, and establish a permit system. Permits are document-based safety checklists that must be signed by the entry supervisor before entry is authorized. The permit specifies the isolation steps, atmospheric test results, and rescue provisions, and must be retained for at least one year to allow for annual program reviews.

OSHA enforces these requirements rigorously. Citations for failing to identify confined spaces or for failing to implement a written program often fall under the "Serious" or "Willful" categories. Serious violations, which occur when there is a substantial probability that death or serious physical harm could result, carry statutory maximum penalties of up to $16,131 per violation. Willful violations, representing an intentional disregard or plain indifference to safety regulations, carry severe penalties of up to $161,323 per violation.