Study guide
10.6 Subparts C & D: Employer Duties, Sanitation, Illumination, Heat and Cold Stress & Ergonomics
OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: OSHA Outreach Training Program Policies & Trainer Authorization
1.1 Outreach Trainer Qualifications, Authorization & Renewal 1.2 Class Administration, Attendance & Delivery Limits 1.3 10-Hour and 30-Hour Construction Curricula & Hour Requirements 1.4 Documentation, Records Retention & Card Processing 1.5 Required Outreach Curriculum, Focus Four Objectives & Student Materials 1.6 Trainer Roles, Training Language, Geographic Jurisdiction & Alternative Delivery
2 Chapter 2: OSH Act, Inspections & Multi-Employer Worksites
2.1 The OSH Act & The General Duty Clause 2.2 OSHA Inspection Process, Citations & Penalties 2.3 Injury/Illness Recordkeeping & Fatality Reporting 2.4 Multi-Employer Worksite Policy & Safety Roles 2.5 Managing Safety and Health: Programs, JHAs, Investigations & Safety Leadership
3 Chapter 3: Fall Protection Standards (29 CFR 1926 Subpart M)
3.1 Fall Protection Triggers, Scope & Duty to Have Fall Protection 3.2 Guardrail Systems, Safety Nets & Falling Object Protection 3.3 Personal Fall Arrest Systems (PFAS), Positioning & Restraint 3.4 Warning Lines, Safety Monitoring & Fall Protection Plans
4 Chapter 4: Scaffolds, Stairways, and Ladders (Subparts L & X)
4.1 Supported Scaffolds: Capacity, Planking & Erection 4.2 Suspended Scaffolds, Special Types & Fall Protection 4.3 Stairways and Stair Rails 4.4 Portable and Fixed Ladders: Setup, Inspection & Use
5 Chapter 5: Excavations, Trenching & Soil Mechanics (Subpart P)
5.1 Excavation Hazards, Access & Protective System Triggers 5.2 Soil Classification & Field Testing Procedures 5.3 Sloping, Benching, Shoring & Shield Systems 5.4 Trench Atmospheres, Utilities & Daily Competent Person Inspections
6 Chapter 6: Cranes, Rigging & Heavy Equipment Safety
6.1 Crane Standards (Subpart CC): Setup, Ground Conditions & Power Lines 6.2 Crane Operation, Signal Persons & Operator Qualifications 6.3 Rigging Equipment & Slings (Subpart H) 6.4 Motor Vehicles, Mechanized Equipment & Struck-By Prevention
7 Chapter 7: Electrical Safety, Confined Spaces & Physical Hazards
7.1 Ground-Fault Protection (GFCI) & Assured Grounding Programs 7.2 Electrical Wiring, Overcurrent Protection & Lockout/Tagout 7.3 Confined Spaces in Construction (Subpart AA) 7.4 Fire Protection, Welding & Hot Work Safety (Subparts F & J)
8 Chapter 8: Health Hazards, Silica, Noise & Personal Protective Equipment
8.1 Respirable Crystalline Silica (1926.1153) & Dust Controls 8.2 Occupational Noise, Lead & Chemical Hazards 8.3 Hazard Communication & Safety Data Sheets 8.4 Personal Protective Equipment & Respiratory Protection
9 Chapter 9: Adult Learning Principles & Instructional Delivery
9.1 Principles of Adult Learning (Andragogy) & Learner Engagement 9.2 Writing Performance-Based Learning Objectives & Bloom's Taxonomy 9.3 Instructional Methods, Questioning & Classroom Management 9.4 Training Evaluation & OSHA 500 Presentation Test Preparation
10 Chapter 10: Additional 29 CFR 1926 Subparts & Outreach Elective Topics
10.1 Steel Erection (Subpart R) 10.2 Concrete and Masonry Construction (Subpart Q) 10.3 Hand and Power Tools (Subpart I) 10.4 Materials Handling, Storage, Use & Disposal and Powered Industrial Vehicles 10.5 Signs, Signals, Barricades & Demolition (Subparts G and T) 10.6 Subparts C & D: Employer Duties, Sanitation, Illumination, Heat and Cold Stress & Ergonomics
10.6 Subparts C & D: Employer Duties, Sanitation, Illumination, Heat and Cold Stress & Ergonomics
Key Takeaways Explain This Topic AI
29 CFR 1926.20(b) requires employers to initiate and maintain accident prevention programs providing for frequent and regular jobsite inspections by competent persons designated by the employer.
Where no infirmary, clinic, hospital, or physician is reasonably accessible, a person holding a valid first-aid certificate must be available at the worksite to render first aid (29 CFR 1926.50(c)).
The common drinking cup is prohibited, potable water containers must be tightly closable and tapped, and nonpotable water outlets must be posted to indicate the water is unsafe.
Toilets must be provided by the table in 1926.51(c)(1): one facility for 20 or fewer employees, and one toilet seat and one urinal per 40 workers above that.
OSHA has no specific heat or ergonomics standard for construction, so both are enforced through the General Duty Clause, Section 5(a)(1), together with 1926.21(b)(2) training duties.
Last updated: September 2026
10.6 Subparts C & D: Employer Duties, Sanitation, Illumination, Heat and Cold Stress & Ergonomics
Core Principle: Subpart C (1926.20–35) and Subpart D (1926.50–66) are where 29 CFR 1926 states the things every employer owes every employee regardless of trade: a program, inspections, training, first aid, drinking water, toilets, light, and a clean site. They are short, they are easy to skip in a trainer course, and they generate a steady stream of citations. This section also covers ergonomics — a named outreach elective — and heat stress , neither of which has a specific construction standard.
1. Accident Prevention Responsibilities (1926.20)
29 CFR 1926.20(b) is the program duty already introduced in Section 2.5 of this guide, and it is worth restating because four short sentences carry four separate obligations:
(b)(1) It is the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with Part 1926.
(b)(2) Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers .
(b)(3) The use of any machinery, tool, material, or equipment not in compliance with Part 1926 is prohibited; it shall be identified as unsafe by tagging or locking the controls to render it inoperable, or physically removed from its place of operation.
(b)(4) The employer shall permit only those employees qualified by training or experience to operate equipment and machinery.
1926.32 supplies the definitions a trainer uses constantly: competent person (f) — capable of identifying existing and predictable hazards and authorized to take prompt corrective measures; qualified (m) — by degree, certificate, professional standing, or extensive knowledge, training, and experience has successfully demonstrated the ability to solve or resolve problems relating to the subject matter; authorized person (d) — approved or assigned by the employer to perform a specific type of duty or to be at a specific location.
2. Safety Training and Education (1926.21)
1926.21(b)(2) is the broadest training duty in the whole of Part 1926: "The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury." Paragraphs (b)(3) through (b)(6) add specific duties for employees who handle poisons, caustics, and other harmful substances ; who work where harmful plants or animals are present; who handle flammable liquids, gases, or toxic materials ; and who must enter confined or enclosed spaces , for whom the employer must instruct on the nature of the hazards, necessary precautions, and the use of protective and emergency equipment.
Every outreach class should close its Introduction to OSHA module by making this point: the card in your pocket is awareness training, and your employer still owes you 1926.21(b)(2) training on the specific hazards of your specific job.
3. Medical Services and First Aid (1926.50)
Paragraph Requirement
(a) The employer shall ensure the availability of medical personnel for advice and consultation on matters of occupational health
(b) Provisions shall be made prior to commencement of the project for prompt medical attention in case of serious injury
(c) In the absence of an infirmary, clinic, hospital, or physician reasonably accessible in terms of time and distance , a person who holds a valid certificate in first-aid training (U.S. Bureau of Mines, American Red Cross, or equivalent training verifiable by documentary evidence) shall be available at the worksite to render first aid
(d) First aid supplies shall be easily accessible when required , in a weatherproof container with individual sealed packages for each type of item, checked by the employer before being sent out on each job and at least weekly on each job to ensure expended items are replaced
(e) Proper equipment for prompt transportation of the injured person, or a communication system for contacting ambulance service , shall be provided
(f) Where 911 dispatch is not available , the telephone numbers of physicians, hospitals, or ambulances shall be conspicuously posted . Where 911 is available and the employer uses a communication system, the employer must ensure the system is effective in the work area, accounting for the topography and the remoteness of the site
(g) Where the eyes or body may be exposed to injurious corrosive materials , suitable facilities for quick drenching or flushing shall be provided within the work area for immediate emergency use
Exam Trap: 1926.50(c) does not require a first-aid-trained person on every site. It requires one where a clinic, hospital, or physician is not reasonably accessible in terms of time and distance . OSHA's interpretive position has been that a response time of roughly 3 to 4 minutes is appropriate where serious injuries such as those from electrical shock or major bleeding are possible, and up to about 15 minutes in lower-hazard settings.
- 4. Sanitation (1926.51)
- Potable Water — 1926.51(a)
An adequate supply of potable water shall be provided in all places of employment.
Portable containers used to dispense drinking water shall be capable of being tightly closed and equipped with a tap ; water shall not be dipped from containers .
Any container used to distribute drinking water shall be clearly marked as to the nature of its contents and not used for any other purpose.
The common drinking cup is prohibited.
Where single-service cups are supplied, both a sanitary container for the unused cups and a receptacle for disposing of used cups shall be provided.
Nonpotable Water — 1926.51(b)
Outlets for nonpotable water — for industrial or firefighting purposes — shall be posted in a manner understandable to all employees that the water is unsafe and not to be used for drinking, washing, or cooking . There shall be no cross-connection, open or potential , between a potable and a nonpotable system.
Toilets — 1926.51(c)
- Number of employees Minimum number of facilities
- 20 or less 1
- 20 or more 1 toilet seat and 1 urinal per 40 workers
- 200 or more 1 toilet seat and 1 urinal per 50 workers
Under temporary field conditions , provision shall be made to assure not less than one toilet facility is available . Jobsites not provided with a sanitary sewer shall have privies (where local codes permit), chemical toilets, recirculating toilets, or combustion toilets. Mobile crews having transportation readily available to nearby toilet facilities are excepted.
Washing Facilities, Food, and Vermin — 1926.51(f), (d), (c)(4)
Adequate washing facilities shall be provided for employees engaged in the application of paints, coatings, herbicides, or insecticides , or in other operations where contaminants may be harmful; they shall be in near proximity to the worksite and equipped to enable employees to remove such substances, and maintained in a sanitary condition. Food service shall be protected against contamination, and enclosed workplaces shall be constructed to prevent the entrance or harborage of rodents, insects, and other vermin .
5. Illumination and Housekeeping (1926.25, 1926.26, 1926.56)
1926.25 Housekeeping: during the course of construction, form and scrap lumber with protruding nails and all other debris shall be kept cleared from work areas, passageways, and stairs, in and around buildings or other structures. Combustible scrap and debris shall be removed at regular intervals , and containers shall be provided for the collection and separation of waste, trash, oily and used rags, and other refuse; containers for garbage and other oily, flammable, or hazardous wastes shall be equipped with covers .
1926.26 Illumination: construction areas, aisles, stairs, ramps, runways, corridors, offices, shops, and storage areas where work is in progress shall be lighted with either natural or artificial illumination ; the minimum requirements are in Subpart D.
1926.56 Illumination: Table D-3 sets minimum illumination intensities in foot-candles while any work is in progress. Note the first two rows carefully — they are easy to reverse:
- Foot-candles Area or operation
- 5 General construction area lighting
3 General construction areas , concrete placement, excavation and waste areas, accessways, active storage areas, loading platforms, refueling, and field maintenance areas
5 Indoors: warehouses, corridors, hallways, and exitways
5 Tunnels, shafts, and general underground work areas — exception: a minimum of 10 foot-candles at tunnel and shaft heading during drilling, mucking, and scaling
10 General construction plant and shops (batch plants, screening plants, mechanical and electrical equipment rooms, carpenter shops, rigging lofts and active storerooms, barracks or living quarters, locker or dressing rooms, mess halls, indoor toilets and workrooms)
- 30 First aid stations, infirmaries, and offices
- 6. Heat Stress: No Standard, Real Enforcement
There is no OSHA standard specific to heat in general industry or construction. OSHA reaches heat illness through Section 5(a)(1) of the OSH Act, the General Duty Clause , supported by 1926.21(b)(2) training duties, 1926.51(a) potable water, and the National Emphasis Program on outdoor and indoor heat-related hazards first issued in 2022. A federal rulemaking on heat injury and illness prevention has been in progress since 2021 but, as of this writing, no final heat standard is in force; several State Plans, including California, Washington, Oregon, Colorado, Minnesota, Maryland, and Nevada, have adopted their own heat rules, so check the jurisdiction before teaching specific trigger temperatures.
What a Trainer Can Teach with Confidence
Condition Recognition Response
Heat rash Red cluster of pimples or small blisters, usually neck, upper chest, groin, elbow creases Keep the area dry; work in a cooler, less humid environment where possible
Heat cramps Muscle cramps, pain, or spasms in the abdomen, arms, or legs, usually with heavy sweating Stop activity, move to a cool place, drink water or a sports drink; seek medical help if cramps last more than an hour or the worker is on a low-sodium diet or has heart problems
Heat exhaustion Heavy sweating, cool moist skin, weakness, dizziness, nausea, headache, fast and weak pulse, irritability, thirst, elevated body temperature, decreased urine output Move to a shaded or air-conditioned area, give water, remove unnecessary clothing, cool with wet cloths or a cool bath, stay with the worker until help arrives
Heat stroke Confusion, altered mental status, slurred speech, loss of consciousness, seizures, very high body temperature, hot dry skin or profuse sweating A medical emergency. Call 911 immediately. Move the worker to a shaded cool area, remove outer clothing, cool quickly with cold water or an ice bath, circulate the air, place cold wet cloths or ice on the head, neck, armpits and groin, and stay with the worker
Controls follow the hierarchy: engineering (shade structures, mechanical cooling, ventilation, mechanized handling to reduce metabolic load), administrative (acclimatization for new and returning workers, work/rest cycles, scheduling heavy work for the cooler part of the day, buddy checks, rest breaks in shade, water encouraged every 15 minutes in hot conditions), and PPE (cooling vests, light-colored breathable clothing — while recognizing that impermeable protective clothing dramatically increases heat load).
Acclimatization is the single largest risk factor a trainer can name. A large share of heat fatalities occur in a worker's first few days on the job or after a return from time away. A worker is not acclimatized because they are experienced; acclimatization is physiological and is lost after about a week away from the heat.
Cold Stress
Likewise unregulated by a specific standard and likewise reachable under 5(a)(1). Teach the recognition triad: hypothermia (shivering, fatigue, confusion, loss of coordination, then no shivering and dilated pupils — an emergency), frostbite (numbness, waxy white or grayish-yellow skin, firm or hard skin, blisters), and trench foot (from prolonged wet and cold, even above freezing: reddening, numbness, cramps, blisters). Controls are scheduling, warm break areas, layered dry clothing, and buddy monitoring.
7. Ergonomics in Construction
Ergonomics is a named outreach elective topic , and like heat it has no OSHA standard . The 2000 ergonomics standard was repealed by Congress under the Congressional Review Act in 2001. OSHA addresses musculoskeletal disorders through 5(a)(1) where a recognized hazard is causing or likely to cause serious physical harm and a feasible abatement method exists, and otherwise through guidance and cooperative programs.
- The Risk Factors to Teach
- Force — heavy lifting, carrying, pushing, pulling, gripping
- Repetition — the same motion cycle many times per shift
- Awkward and static postures — overhead work, kneeling, stooping, twisting, sustained bending
- Contact stress — kneeling on hard surfaces, resting tools against the palm
Vibration — hand-arm vibration from grinders, chipping hammers, and impact wrenches; whole-body vibration from heavy equipment seats
- Duration and insufficient recovery
- Construction-Specific Controls That Work
Task Control
Overhead drilling and fastening Extension poles and pole-mounted tools that keep the arms below shoulder height
- Rebar tying Powered rebar tiers and stand-up tying tools to eliminate sustained stooping
- Drywall and panel handling Panel lifts, carts, and two-person handling rules
Masonry Adjustable-height scaffolds and mast climbers that keep the work between knee and shoulder; lighter block units
- Concrete placement and finishing Long-handled screeds and power trowels rather than hand floats
- Material delivery Staging material at the point and height of use rather than at the gate
- Kneeling work Knee pads, kneeling creepers, and rotation
CPWR publishes an extensive construction ergonomics solutions database that a trainer can point students toward. The instructional message is the same one as for every other elective: engineering the task is durable, and asking workers to "lift with your legs" is the weakest control on the list.