Study guide

1.2 Class Administration, Attendance & Delivery Limits

OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: OSHA Outreach Training Program Policies & Trainer Authorization

1.1 Outreach Trainer Qualifications, Authorization & Renewal 1.2 Class Administration, Attendance & Delivery Limits 1.3 10-Hour and 30-Hour Construction Curricula & Hour Requirements 1.4 Documentation, Records Retention & Card Processing 1.5 Required Outreach Curriculum, Focus Four Objectives & Student Materials 1.6 Trainer Roles, Training Language, Geographic Jurisdiction & Alternative Delivery

2 Chapter 2: OSH Act, Inspections & Multi-Employer Worksites

2.1 The OSH Act & The General Duty Clause 2.2 OSHA Inspection Process, Citations & Penalties 2.3 Injury/Illness Recordkeeping & Fatality Reporting 2.4 Multi-Employer Worksite Policy & Safety Roles 2.5 Managing Safety and Health: Programs, JHAs, Investigations & Safety Leadership

3 Chapter 3: Fall Protection Standards (29 CFR 1926 Subpart M)

3.1 Fall Protection Triggers, Scope & Duty to Have Fall Protection 3.2 Guardrail Systems, Safety Nets & Falling Object Protection 3.3 Personal Fall Arrest Systems (PFAS), Positioning & Restraint 3.4 Warning Lines, Safety Monitoring & Fall Protection Plans

4 Chapter 4: Scaffolds, Stairways, and Ladders (Subparts L & X)

4.1 Supported Scaffolds: Capacity, Planking & Erection 4.2 Suspended Scaffolds, Special Types & Fall Protection 4.3 Stairways and Stair Rails 4.4 Portable and Fixed Ladders: Setup, Inspection & Use

5 Chapter 5: Excavations, Trenching & Soil Mechanics (Subpart P)

5.1 Excavation Hazards, Access & Protective System Triggers 5.2 Soil Classification & Field Testing Procedures 5.3 Sloping, Benching, Shoring & Shield Systems 5.4 Trench Atmospheres, Utilities & Daily Competent Person Inspections

6 Chapter 6: Cranes, Rigging & Heavy Equipment Safety

6.1 Crane Standards (Subpart CC): Setup, Ground Conditions & Power Lines 6.2 Crane Operation, Signal Persons & Operator Qualifications 6.3 Rigging Equipment & Slings (Subpart H) 6.4 Motor Vehicles, Mechanized Equipment & Struck-By Prevention

7 Chapter 7: Electrical Safety, Confined Spaces & Physical Hazards

7.1 Ground-Fault Protection (GFCI) & Assured Grounding Programs 7.2 Electrical Wiring, Overcurrent Protection & Lockout/Tagout 7.3 Confined Spaces in Construction (Subpart AA) 7.4 Fire Protection, Welding & Hot Work Safety (Subparts F & J)

8 Chapter 8: Health Hazards, Silica, Noise & Personal Protective Equipment

8.1 Respirable Crystalline Silica (1926.1153) & Dust Controls 8.2 Occupational Noise, Lead & Chemical Hazards 8.3 Hazard Communication & Safety Data Sheets 8.4 Personal Protective Equipment & Respiratory Protection

9 Chapter 9: Adult Learning Principles & Instructional Delivery

9.1 Principles of Adult Learning (Andragogy) & Learner Engagement 9.2 Writing Performance-Based Learning Objectives & Bloom's Taxonomy 9.3 Instructional Methods, Questioning & Classroom Management 9.4 Training Evaluation & OSHA 500 Presentation Test Preparation

10 Chapter 10: Additional 29 CFR 1926 Subparts & Outreach Elective Topics

10.1 Steel Erection (Subpart R) 10.2 Concrete and Masonry Construction (Subpart Q) 10.3 Hand and Power Tools (Subpart I) 10.4 Materials Handling, Storage, Use & Disposal and Powered Industrial Vehicles 10.5 Signs, Signals, Barricades & Demolition (Subparts G and T) 10.6 Subparts C & D: Employer Duties, Sanitation, Illumination, Heat and Cold Stress & Ergonomics

1.2 Class Administration, Attendance & Delivery Limits

Key Takeaways Explain This Topic AI

Class size must be between a minimum of 3 students and a maximum of 40 students; any deviation requires advance written ATO approval.

Daily instruction is capped at 7.5 student contact hours per calendar day (10-Hour courses require ≥2 calendar days; 30-Hour courses require ≥4 calendar days).

All course hours must be completed within a 180-calendar-day window from the course start date to the course end date.

Students must achieve 100% attendance; makeup training is permitted only if the student completed at least 50% of hours with the primary trainer.

The primary Outreach trainer must personally teach at least 50% of the class and attend at all times (at least 20% when authorized assistant trainers are used); OSHA sets no percentage cap on guest trainers, and video is capped at 25% of instructional time.

Last updated: September 2026

Class Administration, Attendance & Delivery Limits

Core Principle: To preserve instructional quality, ensure adult learner engagement, and prevent fraudulent 'card milling,' OSHA enforces strict parameters governing class sizes, daily contact hours, course duration, student attendance, makeup instruction, guest presenters, and multimedia usage. Violating any of these administrative delivery standards places the course in non-compliance and risks card revocation.

1. Class Size Restrictions and ATO Approvals

The OSHA Outreach Training Program Requirements establish clear upper and lower limits on the number of students permitted in a single Outreach class:

The Minimum Class Size Rule: 3 Students

An authorized trainer must train a minimum of three (3) students per class.

Pedagogical Rationale: Outreach training relies heavily on peer interaction, small-group hazard identification exercises, adult discussion, and collective problem-solving. A one-on-one or two-student session does not provide the dynamic group interaction intended by the program.

Advance ATO Waiver: A trainer may not conduct a class for one or two students without obtaining prior written approval from their Authorizing Training Organization (ATO). The trainer must submit an exception request explaining the extenuating circumstances before the class begins.

The Maximum Class Size Rule: 40 Students

A single Outreach class cannot exceed forty (40) students .

Instructor Span of Control: Classes exceeding 40 participants compromise the instructor's ability to monitor engagement, facilitate participatory workshops, assess learning outcomes, and maintain classroom discipline.

Advance ATO Approval: Training more than 40 students requires prior written authorization from the ATO. The ATO may require an additional co-authorized trainer to be present and co-teach the course.

2. Daily Student Contact Hour Limits and Class Spacing

OSHA mandates strict limits on how many instructional hours may be delivered in a single 24-hour calendar day.

The 7.5-Hour Daily Maximum

Maximum Contact Hours: Training is strictly limited to a maximum of 7.5 student contact hours per calendar day.

Definition (Requirements V.F.3): Student contact hours are the time spent covering course content . They exclude :

  • Meal breaks and all other breaks
  • Administrative matters such as taking attendance
  • Administering optional tests — testing is never instructional time and never counts toward the 10 or 30 hours
  • Registration, course evaluations, and card distribution

The 10-Hour Session Envelope: An individual training session may run no more than 10 consecutive hours in total (7.5 contact hours plus breaks, meals, attendance, and testing). No more than 10 hours of training may be conducted in any 16-hour period, and an 8-hour minimum break is required if 7.5 or more hours of training occur within a 16-hour period.

Mandatory Minimum Calendar Days

Because of the 7.5-hour daily cap, Outreach courses cannot be compressed into single-day marathons:

10-Hour Construction Course: Must be delivered across at least two (2) calendar days . A trainer can never deliver a 10-Hour course in one calendar day (e.g., 7.5 hours on Day 1 and 2.5 hours on Day 2, or two 5-hour days).

30-Hour Construction Course: Must be delivered across at least four (4) calendar days (e.g., four days of 7.5 contact hours, or five days of 6 contact hours).

Mandatory Break and Meal Schedules

Meal Breaks: Any training session lasting six (6) hours or longer in a single day must include a dedicated meal break of at least thirty (30) minutes .

Rest Breaks: Instructors must provide at least one 10-minute rest break for every two (2) hours of continuous instruction.

Breaks cannot be accumulated or skipped to dismiss students early, and break minutes cannot be counted toward instructional contact hours.

3. The 180-Day Completion Window

Duration Rule: An Outreach training course—from the first instructional minute of Day 1 to the final minute of the last session—must be completed within 180 calendar days .

Flexible Delivery Formats: Instructors have the flexibility to schedule classes over consecutive days, spread them across consecutive weekends, or deliver two hours per evening once a week, provided the entire course finishes within the 180-day window.

Consequences of Exceeding 180 Days: If a class exceeds 180 calendar days from start to finish, the course is invalid. Students cannot receive completion cards for that training.

4. Student Attendance Mandate and Makeup Training Policies

OSHA Outreach training requires verified, comprehensive student participation.

100% Attendance Requirement

Every student must attend 100% of all scheduled contact hours to receive an official Department of Labor student course completion card.

No Partial Cards: There is no such thing as a partial card, fractional credit, or an excused absence from mandatory topics. If a student misses a single 30-minute module, they cannot receive a card until that specific topic is completed.

The 50% Rule for Makeup Training

When a student misses instructional time due to an unavoidable illness, family emergency, or operational conflict, makeup training is permissible under strict regulatory conditions:

The 50% Threshold: To be eligible for makeup training, the student must have completed at least 50% of the instructional contact hours during the original class offering (at least 5.0 contact hours in a 10-Hour class; at least 15.0 contact hours in a 30-Hour class).

Ineligibility: If the student completed less than 50% of the course, they are ineligible for makeup training and must retake the entire course from the beginning.

180-Day Limit: All makeup training must be completed within the original 180-calendar-day window from the initial course start date.

Who May Deliver It: Makeup training may be performed by the primary Outreach trainer or by an assistant Outreach trainer. A student may also make up a portion with the guest trainer who originally taught that portion , provided the primary trainer coordinates it and the student has access to the primary trainer for follow-up questions. The primary trainer remains responsible for all reporting.

Small Classes Permitted: Makeup training classes consisting of fewer than three students are expressly permitted — the three-student minimum does not apply to makeup sessions.

Documentation: Makeup documentation must be submitted separately from the original OTPR and must include the student's contact information, completed topics and contact hours, missed topics and contact hours, and the reason the student could not complete the original class. A new OTPR carrying the makeup class end date is then submitted.

5. Primary, Assistant and Guest Trainers (The 50% and 20% Rules)

Requirements Section V.M defines three distinct trainer roles. This is one of the most frequently mis-taught areas in the whole program, so learn the two percentages and which role each one attaches to.

The Primary Outreach Trainer (V.M.1)

The primary trainer owns the class. This individual must:

  • Design and coordinate the class;
  • Teach a minimum of 50% of the class (except as modified by the assistant-trainer rule below);
  • Be in attendance at all times to answer questions (again, except under the assistant-trainer rule);
  • Document the class and retain class documentation , including student attendance; and

Maintain a list of assistant and guest trainers used for each class, their qualifications, and the topics each one delivered.

Assistant Outreach Trainers (V.M.2)

An assistant Outreach trainer must be OSHA-authorized in the specific industry being delivered (construction, here).

Using assistant trainers relieves the primary trainer of the duty to attend every session — but when assistants are used, the primary trainer must still be in attendance for at least 20% of the class .

The primary trainer still documents, coordinates, and retains records for all sessions.

Guest Trainers (V.M.3)

A guest trainer is a subject matter expert who is not an OSHA-authorized Outreach trainer — a master rigger, a certified industrial hygienist, a utility locator, a crane inspector.

At least one OSHA-authorized Outreach trainer must be in attendance at all times while a guest trainer is presenting.

OSHA publishes no percentage cap on guest-trainer time . The limit is indirect: because the primary trainer must personally teach at least 50% of the class, guest and assistant delivery together cannot displace more than half of it.

Records: The primary trainer must retain a list of each guest trainer's name, the specific topics taught, the cumulative class time spent on each topic, and the guest trainer's qualifications (Requirements V.P).

Warning

Exam Trap: There is no "80/20 guest trainer rule" in the Outreach Training Program Requirements. The two numbers that matter are 50% (minimum the primary trainer personally teaches) and 20% (minimum attendance by the primary trainer when authorized assistant trainers are used). Anyone on the Outreach Trainer Watch List may not be used as an assistant or guest trainer at all.

6. Video and Multimedia Delivery Limits (The 25% Rule)

Passive video watching is contrary to adult learning principles and violates Outreach training standards.

The 25% Multimedia Cap

Videos, pre-recorded films, and multimedia presentations cannot account for more than 25% of total course contact time :

In a 10-Hour course: Video/multimedia is capped at a maximum of 2.5 hours (150 minutes).

In a 30-Hour course: Video/multimedia is capped at a maximum of 7.5 hours (450 minutes).

Active Facilitation: The remaining 75%+ of instructional time must consist of direct, interactive adult learning methods (instructor-led discussions, case study analyses, small-group hazard hunts, mock inspection walkthroughs, and hands-on demonstrations).

Prohibition on Unattended Video: A trainer may never turn on a video and leave the classroom. All videos must be directly introduced, actively monitored, and followed by structured discussion or comprehension checks.

Loading diagram... Class Administration and Delivery Parameter Framework