Study guide

1.3 10-Hour and 30-Hour Construction Curricula & Hour Requirements

OSHA 500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: OSHA Outreach Training Program Policies & Trainer Authorization

1.1 Outreach Trainer Qualifications, Authorization & Renewal 1.2 Class Administration, Attendance & Delivery Limits 1.3 10-Hour and 30-Hour Construction Curricula & Hour Requirements 1.4 Documentation, Records Retention & Card Processing 1.5 Required Outreach Curriculum, Focus Four Objectives & Student Materials 1.6 Trainer Roles, Training Language, Geographic Jurisdiction & Alternative Delivery

2 Chapter 2: OSH Act, Inspections & Multi-Employer Worksites

2.1 The OSH Act & The General Duty Clause 2.2 OSHA Inspection Process, Citations & Penalties 2.3 Injury/Illness Recordkeeping & Fatality Reporting 2.4 Multi-Employer Worksite Policy & Safety Roles 2.5 Managing Safety and Health: Programs, JHAs, Investigations & Safety Leadership

3 Chapter 3: Fall Protection Standards (29 CFR 1926 Subpart M)

3.1 Fall Protection Triggers, Scope & Duty to Have Fall Protection 3.2 Guardrail Systems, Safety Nets & Falling Object Protection 3.3 Personal Fall Arrest Systems (PFAS), Positioning & Restraint 3.4 Warning Lines, Safety Monitoring & Fall Protection Plans

4 Chapter 4: Scaffolds, Stairways, and Ladders (Subparts L & X)

4.1 Supported Scaffolds: Capacity, Planking & Erection 4.2 Suspended Scaffolds, Special Types & Fall Protection 4.3 Stairways and Stair Rails 4.4 Portable and Fixed Ladders: Setup, Inspection & Use

5 Chapter 5: Excavations, Trenching & Soil Mechanics (Subpart P)

5.1 Excavation Hazards, Access & Protective System Triggers 5.2 Soil Classification & Field Testing Procedures 5.3 Sloping, Benching, Shoring & Shield Systems 5.4 Trench Atmospheres, Utilities & Daily Competent Person Inspections

6 Chapter 6: Cranes, Rigging & Heavy Equipment Safety

6.1 Crane Standards (Subpart CC): Setup, Ground Conditions & Power Lines 6.2 Crane Operation, Signal Persons & Operator Qualifications 6.3 Rigging Equipment & Slings (Subpart H) 6.4 Motor Vehicles, Mechanized Equipment & Struck-By Prevention

7 Chapter 7: Electrical Safety, Confined Spaces & Physical Hazards

7.1 Ground-Fault Protection (GFCI) & Assured Grounding Programs 7.2 Electrical Wiring, Overcurrent Protection & Lockout/Tagout 7.3 Confined Spaces in Construction (Subpart AA) 7.4 Fire Protection, Welding & Hot Work Safety (Subparts F & J)

8 Chapter 8: Health Hazards, Silica, Noise & Personal Protective Equipment

8.1 Respirable Crystalline Silica (1926.1153) & Dust Controls 8.2 Occupational Noise, Lead & Chemical Hazards 8.3 Hazard Communication & Safety Data Sheets 8.4 Personal Protective Equipment & Respiratory Protection

9 Chapter 9: Adult Learning Principles & Instructional Delivery

9.1 Principles of Adult Learning (Andragogy) & Learner Engagement 9.2 Writing Performance-Based Learning Objectives & Bloom's Taxonomy 9.3 Instructional Methods, Questioning & Classroom Management 9.4 Training Evaluation & OSHA 500 Presentation Test Preparation

10 Chapter 10: Additional 29 CFR 1926 Subparts & Outreach Elective Topics

10.1 Steel Erection (Subpart R) 10.2 Concrete and Masonry Construction (Subpart Q) 10.3 Hand and Power Tools (Subpart I) 10.4 Materials Handling, Storage, Use & Disposal and Powered Industrial Vehicles 10.5 Signs, Signals, Barricades & Demolition (Subparts G and T) 10.6 Subparts C & D: Employer Duties, Sanitation, Illumination, Heat and Cold Stress & Ergonomics

1.3 10-Hour and 30-Hour Construction Curricula & Hour Requirements

Key Takeaways Explain This Topic AI

The 10-Hour course requires 6 mandatory hours (4 hrs Focus Four with min 1.5 hrs Falls, 0.5 hr each for other three), 2 elective hours (≥2 topics), and 2 optional hours.

The 30-Hour course requires 14 mandatory hours (Intro to OSHA 1, Managing Safety and Health 2, Focus Four 6 with a 1.5-hour falls minimum and 30 minutes each for the other three, PPE 2, Health Hazards 2, Stairways and Ladders 1), 12 elective hours across at least 6 topics, and 4 optional hours.

Managing Safety and Health (2 hours) and Stairways and Ladders (1 hour) are mandatory topics in the 30-Hour course, but are not mandatory in the 10-Hour course.

The 30-hour elective list is the 10-hour list minus Stairways and Ladders plus Foundations for Safety Leadership, which alone carries a 2-hour-30-minute minimum.

Every topic taught in an Outreach course must be delivered for a minimum duration of 30 minutes; micro-topics shorter than 30 minutes are strictly prohibited.

Last updated: September 2026

10-Hour and 30-Hour Construction Curricula & Hour Requirements

Core Principle: The OSHA Construction Outreach Training Program is structured around two distinct tiers: the 10-Hour Construction Course , targeted at entry-level construction workers, and the 30-Hour Construction Course , designed for supervisory, management, and safety personnel. Each course has rigid, non-negotiable minimum hour allocations divided into Mandatory , Elective , and Optional blocks governed by the OSHA Construction Industry Procedures.

1. Program Comparison: 10-Hour vs. 30-Hour Construction

Curricular Component 10-Hour Construction Outreach 30-Hour Construction Outreach

Target Audience Entry-level craft workers, laborers, apprentices Foremen, superintendents, project managers, safety coordinators

  • Total Contact Hours Exactly 10.0 Hours Exactly 30.0 Hours
  • Mandatory Topics 6.0 Hours 14.0 Hours
  • Elective Topics 2.0 Hours (Min 2 distinct topics) 12.0 Hours (Min 6 distinct topics)
  • Optional Topics 2.0 Hours 4.0 Hours
  • Minimum Calendar Days 2 Calendar Days 4 Calendar Days
  • Daily Contact Limit 7.5 Hours 7.5 Hours
  • 2. 10-Hour Construction Outreach Curriculum Breakdown

The 10-Hour Construction course provides entry-level workers with broad awareness of recognition, avoidance, abatement, and prevention of basic construction safety and health hazards.

Mandatory Topics (6.0 Hours Total)

All authorized trainers must cover every mandatory topic for the minimum specified time:

Introduction to OSHA (1.0 Hour):

  • OSH Act of 1970, purpose and historical background
  • Worker rights under Section 11(c) (whistleblower protections)

Employer responsibilities under the OSH Act (providing a safe workplace, hazard correction, mandatory training)

  • OSHA standards organization (Title 29 of the Code of Federal Regulations, Part 1926)
  • Safety Data Sheets (SDS), chemical labeling, and access to exposure and medical records

Reporting fatalities (within 8 hours) and inpatient hospitalizations, amputations, and eye losses (within 24 hours)

How to file an OSHA complaint and participate in OSHA inspections

OSHA Focus Four Hazards (4.0 Hours Total):

Falls (Minimum 1.5 Hours): Fall hazard identification, duty to have fall protection (1926.501), guardrail specifications, personal fall arrest systems (PFAS), and hole covers.

Electrocution (Minimum 0.5 Hour): Overhead power line clearance, ground-fault circuit interrupters (GFCI), grounding, flexible cord safety, and lockout/tagout basics.

Struck-By (Minimum 0.5 Hour): Flying, falling, swinging, and rolling objects; vehicle backing; heavy equipment blind spots; high-visibility apparel.

Caught-In or -Between (Minimum 0.5 Hour): Trench cave-ins, rotating equipment, unguarded machinery/pinch points, and caught between moving equipment and fixed structures.

Note on Focus Four Allocation: The four minimums account for 3.0 hours (1.5 + 0.5 + 0.5 + 0.5). The remaining 1.0 hour must be distributed across any of the Focus Four hazard areas based on class needs.

Personal Protective and Lifesaving Equipment (PPE) (0.5 Hour Minimum):

Head, eye, face, hand, foot, and hearing protection under Subpart E

Employer payment rule for PPE (and exceptions such as non-specialty steel-toe boots and prescription safety eyewear)

Health Hazards in Construction (0.5 Hour Minimum):

  • Hazard communication basics (29 CFR 1926.59 / 1910.1200)
  • Chemical hazards (solvents, adhesives, carbon monoxide)
  • Physical agents (occupational noise, heat stress, cold stress)
  • Biological hazards and airborne contaminants (respirable crystalline silica, lead, asbestos)
  • Elective Topics (2.0 Hours Total)

The trainer must select at least two (2) distinct topics from the following list, delivering each for at least 30 minutes:

  • Concrete and Masonry Construction (Subpart Q)
  • Permit-Required Confined Spaces (Subpart AA)
  • Cranes, Derricks, Hoists, Elevators, and Conveyors (Subpart CC)
  • Ergonomics
  • Excavations (Subpart P)
  • Fire Protection and Prevention (Subpart F)
  • Materials Handling, Storage, Use, and Disposal (Subpart H)

Motor Vehicles; Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; and Signs, Signals, and Barricades (Subparts O, W, G)

  • Powered Industrial Vehicles
  • Safety and Health Programs
  • Scaffolds (Subpart L)
  • Stairways and Ladders (Subpart X)
  • Steel Erection (Subpart R)
  • Tools - Hand and Power (Subpart I)
  • Welding and Cutting (Subpart J)
  • Optional Topics (2.0 Hours Total)

Additional construction safety and health topics, extending mandatory/elective subjects, or addressing site-specific trade hazards.

3. 30-Hour Construction Outreach Curriculum Breakdown

The 30-Hour Construction course is an extensive safety management curriculum designed for supervisory personnel, safety directors, project engineers, and union stewards.

Mandatory Topics (14.0 Hours Total)

Introduction to OSHA (1.0 Hour): Scope, statutory rights, standards access, and complaint processes.

Managing Safety and Health (2.0 Hours):

Injury and illness prevention programs, job-site inspections, accident prevention programs, management commitment and employee involvement, worksite analysis, hazard prevention and control, accident investigations, how to conduct safety meetings, and supervisory communication.

Direct vs. indirect costs of accidents, safety culture, and leading vs. lagging indicators.

Note: The Foundations for Safety Leadership (FSL) module is not part of this required block. FSL is a named elective topic in the 30-hour outline with a minimum of 2 hours and 30 minutes .

OSHA Focus Four Hazards (6.0 Hours Total):

Falls (Minimum 1 hour 30 minutes): Detailed fall hazard analysis, fall protection plans, PFAS clearance calculations, rescue planning.

Electrocution (Minimum 30 minutes): Assured grounding programs, temporary power, overhead line clearances, Subpart K.

Struck-By (Minimum 30 minutes): Rigging safety, crane swing radius, highway work zones (MUTCD).

Caught-In or -Between (Minimum 30 minutes): Excavation shielding/shoring, machine guarding, equipment pinch points.

Note on Focus Four Allocation: The published minimums are identical in the 10-hour and the 30-hour class — falls 1.5 hours, the other three 30 minutes each — totalling 3.0 hours . In the 30-hour class the block is 6.0 hours, so the remaining 3.0 hours are distributed across the Focus Four areas at the trainer's discretion. If more than the block time is spent here, the extra may be reported under Focus Four or under a related elective such as scaffolds, cranes, or excavations.

Personal Protective and Lifesaving Equipment (PPE) (2.0 Hours Minimum):

PPE hazard assessments, selection criteria, maintenance, limitations, and employer payment rules.

Health Hazards in Construction (2.0 Hours Minimum):

  • Deep dive into respirable crystalline silica (Table 1 compliance vs. objective data under 1926.1153)
  • Lead in construction (1926.62), occupational noise and hearing conservation (1926.52)
  • Respiratory protection program requirements (1910.134)

Stairways and Ladders (1.0 Hour Minimum):

Subpart X rules: pitch ratios (4:1), 3-foot extension above landings, ladder duty ratings, proper tie-off, inspection procedures.

Elective Topics (12.0 Hours Total)

The trainer must choose at least six (6) distinct topics from the official elective list.

Each elective topic must be taught for a minimum of 30 minutes (0.5 hour) , except Foundations for Safety Leadership, which carries its own 2-hour-30-minute minimum .

The 30-hour elective list is the 10-hour list minus Stairways and Ladders (which is a required topic at this level) plus Foundations for Safety Leadership .

Electives must be chosen to reflect the specific hazards encountered by the participating workforce.

Optional Topics (4.0 Hours Total)

Used for specialized industry hazards, company safety manuals, or extending elective modules.

4. The 30-Minute Minimum Topic Duration Rule

A critical rule enforced by OSHA and ATO auditors is the 30-minute minimum duration rule :

No Micro-Topics: Every topic covered in an Outreach course—whether mandatory, elective, or optional—must be scheduled and taught for a minimum of thirty (30) contiguous minutes (0.5 hour).

Prohibited Practice: A trainer cannot present a 10-minute overview of scaffolds, a 10-minute overview of excavations, and a 10-minute overview of welding, and combine them into a single 30-minute elective block. Each topic must stand alone with its own measurable learning objectives and substantial instructional content.

OSHA's Recommendation: Unless otherwise noted, OSHA recommends spending at least one hour on each topic.

Topic Ceilings (Requirements V.J): A trainer may not spend more than four hours on any single topic in a 10-hour class, or more than six hours on any single topic in a 30-hour class, unless the industry procedures permit otherwise.

Segments: If the class is broken into segments across days, weeks, or months, each segment must itself be a minimum of 30 minutes and the whole class must finish within 180 calendar days.

  • 5. Curricular Comparison Table for Focus Four Hazards
  • | Hazard Domain | 10-Hour Minimum | 30-Hour Minimum | Core Exam Focus Areas |
  • |:---|:---:|:---:|:---||

| Falls | 1.5 Hours | 1.5 Hours | 6-foot trigger (1926.501), guardrail specs (42" ± 3"), PFAS arrest force (1,800 lbs), hole covers |

| Electrocution | 0.5 Hour | 0.5 Hour | Overhead power line clearance (10 ft / 20 ft), GFCI trip threshold (4-6 mA), AEGCP, cord inspection |

| Struck-By | 0.5 Hour | 0.5 Hour | Highway work zones, backing vehicles, rollover protection, falling objects, toeboards |

| Caught-In/Between | 0.5 Hour | 0.5 Hour | Excavation cave-in protection (>5 ft), trench boxes, equipment pinch points, machine guarding |

| Remaining Focus Four | 1.0 Hour | 3.0 Hours | Distributed across any Focus Four categories at trainer's discretion |

| Total Focus Four Time | 4.0 Hours | 6.0 Hours | Represents 40% of 10-hr course and 20% of 30-hr course |

Loading diagram... Curriculum Structure: 10-Hour vs. 30-Hour Construction Outreach