Study guide
1.3 Citation Categories, Penalty Calculations & Contesting Procedures
OSHA 511 Occupational Safety and Health Standards for General Industry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: OSH Act, Regulatory Framework & Inspection Procedures
1.1 OSH Act Purpose, Scope & General Duty Clause 1.2 OSHA Inspections, Priorities & Inspector Credentials 1.3 Citation Categories, Penalty Calculations & Contesting Procedures 1.4 Employer Rights, Employee Rights & Whistleblower Protections 1.5 Navigating 29 CFR: Standards Organization, Codification & Rulemaking 1.6 Safety & Health Programs, Cooperative Programs & Multi-Employer Worksites
2 Chapter 2: OSHA Recordkeeping & Reporting (29 CFR Part 1904)
2.1 Recording Criteria, Exclusions & First Aid vs. Medical Treatment 2.2 OSHA Recordkeeping Forms (Forms 300, 300A, 301) & Annual Summary Posting 2.3 Severe Injury Reporting Timelines, Privacy Cases & Electronic Submission
3 Chapter 3: Walking-Working Surfaces & Emergency Preparedness (Subparts D & E)
3.1 General Walking-Working Surface Requirements & Housekeeping (1910.22) 3.2 Ladders, Stairways, Scaffolds & Dockboards (1910.23-26) 3.3 Fall Protection Systems, Falling Object Protection & Training (1910.28-30) 3.4 Exit Routes, Emergency Action Plans (EAPs) & Fire Prevention Plans (1910.34-39) 3.5 Fire Protection (Subpart L): Extinguishers, Fixed Systems, Detection & Employee Alarms (1910.155-1910.165)
4 Chapter 4: Hazard Communication & GHS Standard (29 CFR 1910.1200)
4.1 Hazard Communication Standard Overview & Written HazCom Program 4.2 GHS Chemical Hazard Classification & Physical vs. Health Hazards 4.3 GHS Labels, Signal Words & 9 GHS Pictograms 4.4 Safety Data Sheets (16-Section SDS Format) & Employee Information/Training
5 Chapter 5: Personal Protective Equipment & Respiratory Protection (Subpart I)
5.1 Hierarchy of Controls & Hazard Assessment Certification (1910.132) 5.2 Eye, Face, Head, Foot & Hand Protection Standards (1910.133-138) 5.3 Respiratory Protection Program, Fit Testing & Medical Evaluations (1910.134) 5.4 Assigned Protection Factors (APFs), Maximum Use Concentrations & Respirator Selection
6 Chapter 6: Control of Hazardous Energy / Lockout/Tagout (29 CFR 1910.147)
6.1 Energy Control Program & Authorized vs. Affected Employee Roles 6.2 Lockout/Tagout Procedural Steps & Stored Energy Isolation 6.3 Special LOTO Situations: Group LOTO, Shift Changes & Outside Contractors 6.4 Periodic Annual Inspection, LOTO Hardware & Removal of Energy Controls
7 Chapter 7: Permit-Required Confined Spaces (29 CFR 1910.146)
7.1 Confined Space vs. Permit-Required Confined Space (PRCS) Identification 7.2 Atmospheric Testing Sequence, Testing Equipment & Acceptable Limits 7.3 PRCS Entry Roles: Entrant, Attendant, Entry Supervisor & Permit System 7.4 Non-Entry Rescue, Retrieval Systems & Emergency Response Services
8 Chapter 8: Electrical Safety & Safe Work Practices (Subpart S)
8.1 General Electrical Safety, NRTL Listing & Equipment Guarding (1910.303) 8.2 System Grounding, Ground-Fault Circuit Interrupters (GFCIs) & Wiring (1910.304-305) 8.3 Electrical Safe Work Practices, Qualified Persons & Approach Boundaries (1910.331-335) 8.4 Arc Flash Hazards, Personal Protective Equipment & Rubber Insulating Gloves
9 Chapter 9: Machine Guarding & Materials Handling (Subparts N & O)
9.1 General Machine Guarding Requirements & Safeguard Types (1910.212) 9.2 Mechanical Power Presses, Point of Operation & Power Transmission Guarding (1910.217, 1910.219) 9.3 Powered Industrial Trucks (Forklifts): Operator Training, Retraining & Safe Operation (1910.178) 9.4 Materials Handling, Storage, Slings & Overhead Cranes (1910.176, 1910.179, 1910.184) 9.5 Hand & Portable Powered Tools (Subpart P, 1910.241-1910.244)
10 Chapter 10: Occupational Health, Industrial Hygiene & Process Safety (Subparts G & Z)
10.1 Occupational Noise Exposure, Sound Levels & Hearing Conservation Program (1910.95) 10.2 Toxic & Hazardous Substances, Table Z-1 PELs & Industrial Hygiene Paradigm (1910.1000) 10.3 Specific Health Standards: Asbestos, Lead, Bloodborne Pathogens & Methylene Chloride 10.4 Process Safety Management (PSM) of Highly Hazardous Chemicals (1910.119 - 14 Elements) 10.5 Flammable Liquids (1910.106) & Welding, Cutting, and Brazing Safety (1910.252) 10.6 Hazardous Materials (Subpart H): Compressed Gases, Spray Finishing & HAZWOPER (1910.101, 1910.107, 1910.120) 10.7 General Environmental Controls & First Aid: Sanitation, Color Codes, Signs & Tags, Medical Services (Subparts J & K)
1.3 Citation Categories, Penalty Calculations & Contesting Procedures
Key Takeaways Explain This Topic AI
OSHA violations are classified into distinct categories: Other-than-Serious, Serious, Willful, Repeat, Failure to Abate, and De Minimis.
OSHA published no inflation adjustment for 2026, so the amounts effective January 15, 2025 remain the 2026 statutory maximums: $16,550 for Serious and Other-than-Serious violations, and $165,514 for Willful and Repeat violations.
Failure to Abate citations carry a statutory maximum penalty of $16,550 per day past the abatement deadline.
OSHA must issue citations within 6 months of the occurrence of the violation under Section 9(c).
Employers have exactly 15 working days from receipt of a citation to submit a written Notice of Contest to the OSHA Area Director.
Last updated: August 2026
- 1.3 Citation Categories, Penalty Calculations & Contesting Procedures
- Violation Categories and Statutory Monetary Penalties
Following an inspection, if the OSHA Area Director determines that standard violations occurred, OSHA issues written citations and proposed monetary penalties under Section 9 and Section 17 of the Act. Statutory penalty amounts are updated annually in accordance with the Federal Civil Penalties Inflation Adjustment Act.
Violation Classification Legal Definition & Standard
Other-than-Serious A violation that has a direct relationship to job safety and health, but is unlikely to cause death or serious physical harm (e.g., failure to post safety posters or minor administrative recordkeeping errors).; 2026 Max Penalty: $16,550 per violation.
Serious A violation where there is a substantial probability that death or serious physical harm could result, and the employer knew or should have known with reasonable diligence of the hazard. Penalty is statutory mandatory.; 2026 Max Penalty: $16,550 per violation.
Willful A violation committed with intentional disregard of, or plain indifference to, OSH Act requirements. The employer knew of the hazard and made no reasonable effort to eliminate it.; 2026 Max Penalty: $165,514 per violation (Statutory Min: $11,823 ).
Repeat A violation of any standard, regulation, or rule where, upon re-inspection, a substantially similar violation is found, and a prior citation became a final order within the last 5 years .; 2026 Max Penalty: $165,514 per violation.
Failure to Abate (FTA) Failure to correct a previously cited violation by the mandatory abatement deadline specified in the final order.; 2026 Max Penalty: $16,550 per day past abatement date.
De Minimis Technical violations with no direct or immediate relationship to safety or health (e.g., ladder rung spacing off by 1/4 inch). Documented in inspection files; no citation or penalty is issued.; 2026 Max Penalty: $0 .
NO 2026 INFLATION BUMP : The Federal Civil Penalties Inflation Adjustment Act normally raises these figures each January. For 2026 OSHA announced no inflation adjustment — the Bureau of Labor Statistics could not produce the October 2025 CPI-U data during the federal shutdown — so the amounts that took effect January 15, 2025 remain the enforceable 2026 maximums (OSHA memorandum, May 21, 2026). Statutory minimums also apply: $1,085 for a serious violation, $4,256 for a repeat violation, and $11,823 for a willful violation.
Criminal Willful Violations
Under Section 17(e) of the Act, if an employer's Willful violation results in the death of an employee , criminal charges may be brought by the U.S. Department of Justice. Conviction carries court fines of up to $10,000 ($250,000 for individuals or $500,000 for corporations under general criminal sentencing guidelines) and/or imprisonment for up to 6 months for a first offense (up to 12 months for a second conviction).
Penalty Calculation Methodology
OSHA Area Directors calculate proposed monetary penalties using the Field Operations Manual (FOM) guidelines. The process begins with establishing a Gravity-Based Penalty (GBP) :
Severity Assessment : Categorized as High, Medium, or Low based on the injury severity potential.
Probability Assessment : Categorized as Greater or Lesser based on the number of workers exposed, frequency of exposure, and proximity to the hazard.
After setting the base GBP, OSHA applies Penalty Adjustment Factors . Chapter 6 of the Field Operations Manual was revised effective July 14, 2025 , and the current factors are materially more generous to small employers than the pre-2025 table that older study materials still reprint:
Adjustment Factor Current Rule (FOM Chapter 6, effective July 14, 2025)
Size 1–25 employees: 70% reduction; 26–100: 30% ; 101–250: 10% ; 251 or more: none . Based on the maximum number of employees nationwide during the previous 12 months. The 70% tier previously stopped at 10 employees.
Good Faith Up to 25% where the employer has a documented written safety and health management system containing the core elements; 15% where the documented system has only incidental deficiencies. No good-faith credit for high-gravity serious, willful, repeated, or failure-to-abate violations, or for an employer with no program at all.
History 20% reduction for an employer never inspected by federal OSHA or a State Plan, or inspected within the previous 5 years with no serious, willful, repeat, or failure-to-abate violations. A 20% increase may be applied where a high-gravity serious citation became a final order within 5 years. The reduction was 10% before July 2025.
Quick-Fix A 15% reduction, applied after the history and good-faith adjustments, when the employer abates the hazard immediately or promptly. Unavailable for high-gravity serious, willful, repeated, failure-to-abate, and fatality/serious-injury cases.
- Citation Delivery, Posting, and Contesting Procedures
- Issuance Statute of Limitations
Under Section 9(c) of the OSH Act, OSHA must issue citations within 6 months of the occurrence of the alleged violation.
Mandatory Posting Requirements
Upon receiving a citation, the employer must immediately post a copy of the citation at or near the location of the violation for 3 working days or until the hazard is abated , whichever is longer (weekends and federal holidays excluded).
The 15-Working-Day Contest Window
Upon receipt of a citation by certified mail, the employer has exactly 15 working days (excluding weekends and federal holidays) to take legal action. Employer Receives Citation via Certified Mail
- |
- +------------------+------------------+
- | |
- Option A: Informal Conference Option B: Written Notice of Contest
- (Held within 15 working days) (Submitted within 15 working days)
- | |
- Negotiate Settlement Agreement Case Transferred to OSHRC
- (ISA) & Penalty Reductions for ALJ Hearing
Informal Conference : The employer may request an informal conference with the OSHA Area Director within the 15-working-day window. The Area Director has statutory authority to execute an Informal Settlement Agreement (ISA), reduce monetary penalties, reclassify violation severity, or extend abatement dates.
Formal Notice of Contest : If the employer disagrees with the citation, proposed penalty, or abatement deadline, the employer must submit a written Notice of Contest to the Area Director within 15 working days .
CRITICAL RULE : If an employer fails to submit a written Notice of Contest within 15 working days, the citation and penalty assessment automatically become a final order of the OSHRC and are not subject to review by any court or agency.
Adjudication Process Before OSHRC
Once a Notice of Contest is filed:
OSHA transfers the case file to the Occupational Safety and Health Review Commission (OSHRC) .
An Administrative Law Judge (ALJ) conducts formal evidentiary hearings and issues a written decision.
The ALJ decision may be appealed to the full three-member OSHRC Commission .
Decisions of the OSHRC Commission may be appealed to the U.S. Court of Appeals for the judicial circuit where the violation occurred.