Study guide

7.1 Confined Space vs. Permit-Required Confined Space (PRCS) Identification

OSHA 511 Occupational Safety and Health Standards for General Industry Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: OSH Act, Regulatory Framework & Inspection Procedures

1.1 OSH Act Purpose, Scope & General Duty Clause 1.2 OSHA Inspections, Priorities & Inspector Credentials 1.3 Citation Categories, Penalty Calculations & Contesting Procedures 1.4 Employer Rights, Employee Rights & Whistleblower Protections 1.5 Navigating 29 CFR: Standards Organization, Codification & Rulemaking 1.6 Safety & Health Programs, Cooperative Programs & Multi-Employer Worksites

2 Chapter 2: OSHA Recordkeeping & Reporting (29 CFR Part 1904)

2.1 Recording Criteria, Exclusions & First Aid vs. Medical Treatment 2.2 OSHA Recordkeeping Forms (Forms 300, 300A, 301) & Annual Summary Posting 2.3 Severe Injury Reporting Timelines, Privacy Cases & Electronic Submission

3 Chapter 3: Walking-Working Surfaces & Emergency Preparedness (Subparts D & E)

3.1 General Walking-Working Surface Requirements & Housekeeping (1910.22) 3.2 Ladders, Stairways, Scaffolds & Dockboards (1910.23-26) 3.3 Fall Protection Systems, Falling Object Protection & Training (1910.28-30) 3.4 Exit Routes, Emergency Action Plans (EAPs) & Fire Prevention Plans (1910.34-39) 3.5 Fire Protection (Subpart L): Extinguishers, Fixed Systems, Detection & Employee Alarms (1910.155-1910.165)

4 Chapter 4: Hazard Communication & GHS Standard (29 CFR 1910.1200)

4.1 Hazard Communication Standard Overview & Written HazCom Program 4.2 GHS Chemical Hazard Classification & Physical vs. Health Hazards 4.3 GHS Labels, Signal Words & 9 GHS Pictograms 4.4 Safety Data Sheets (16-Section SDS Format) & Employee Information/Training

5 Chapter 5: Personal Protective Equipment & Respiratory Protection (Subpart I)

5.1 Hierarchy of Controls & Hazard Assessment Certification (1910.132) 5.2 Eye, Face, Head, Foot & Hand Protection Standards (1910.133-138) 5.3 Respiratory Protection Program, Fit Testing & Medical Evaluations (1910.134) 5.4 Assigned Protection Factors (APFs), Maximum Use Concentrations & Respirator Selection

6 Chapter 6: Control of Hazardous Energy / Lockout/Tagout (29 CFR 1910.147)

6.1 Energy Control Program & Authorized vs. Affected Employee Roles 6.2 Lockout/Tagout Procedural Steps & Stored Energy Isolation 6.3 Special LOTO Situations: Group LOTO, Shift Changes & Outside Contractors 6.4 Periodic Annual Inspection, LOTO Hardware & Removal of Energy Controls

7 Chapter 7: Permit-Required Confined Spaces (29 CFR 1910.146)

7.1 Confined Space vs. Permit-Required Confined Space (PRCS) Identification 7.2 Atmospheric Testing Sequence, Testing Equipment & Acceptable Limits 7.3 PRCS Entry Roles: Entrant, Attendant, Entry Supervisor & Permit System 7.4 Non-Entry Rescue, Retrieval Systems & Emergency Response Services

8 Chapter 8: Electrical Safety & Safe Work Practices (Subpart S)

8.1 General Electrical Safety, NRTL Listing & Equipment Guarding (1910.303) 8.2 System Grounding, Ground-Fault Circuit Interrupters (GFCIs) & Wiring (1910.304-305) 8.3 Electrical Safe Work Practices, Qualified Persons & Approach Boundaries (1910.331-335) 8.4 Arc Flash Hazards, Personal Protective Equipment & Rubber Insulating Gloves

9 Chapter 9: Machine Guarding & Materials Handling (Subparts N & O)

9.1 General Machine Guarding Requirements & Safeguard Types (1910.212) 9.2 Mechanical Power Presses, Point of Operation & Power Transmission Guarding (1910.217, 1910.219) 9.3 Powered Industrial Trucks (Forklifts): Operator Training, Retraining & Safe Operation (1910.178) 9.4 Materials Handling, Storage, Slings & Overhead Cranes (1910.176, 1910.179, 1910.184) 9.5 Hand & Portable Powered Tools (Subpart P, 1910.241-1910.244)

10 Chapter 10: Occupational Health, Industrial Hygiene & Process Safety (Subparts G & Z)

10.1 Occupational Noise Exposure, Sound Levels & Hearing Conservation Program (1910.95) 10.2 Toxic & Hazardous Substances, Table Z-1 PELs & Industrial Hygiene Paradigm (1910.1000) 10.3 Specific Health Standards: Asbestos, Lead, Bloodborne Pathogens & Methylene Chloride 10.4 Process Safety Management (PSM) of Highly Hazardous Chemicals (1910.119 - 14 Elements) 10.5 Flammable Liquids (1910.106) & Welding, Cutting, and Brazing Safety (1910.252) 10.6 Hazardous Materials (Subpart H): Compressed Gases, Spray Finishing & HAZWOPER (1910.101, 1910.107, 1910.120) 10.7 General Environmental Controls & First Aid: Sanitation, Color Codes, Signs & Tags, Medical Services (Subparts J & K)

7.1 Confined Space vs. Permit-Required Confined Space (PRCS) Identification

Key Takeaways Explain This Topic AI

A confined space under 29 CFR 1910.146(b) must satisfy three specific criteria: large enough to bodily enter, limited or restricted means for entry/exit, and not designed for continuous employee occupancy.

A Permit-Required Confined Space (PRCS) meets all three confined space criteria PLUS at least one of four hazards: hazardous atmosphere, engulfment risk, inward converging walls, or any other serious safety/health hazard.

Alternate Entry Procedures under 1910.146(c)(5) apply only when the ONLY hazard is atmospheric and continuous forced air ventilation alone is sufficient to maintain safe entry conditions.

Reclassification to non-permit status under 1910.146(c)(7) requires the complete elimination of all physical and atmospheric hazards without entering the space (or following PRCS protocol during elimination).

Continuous forced air ventilation controls but does NOT eliminate an atmospheric hazard, meaning spaces relying on ventilation cannot be reclassified under (c)(7) and must be handled under (c)(5) alternate entry.

Last updated: October 2026

  • 7.1 Confined Space vs. Permit-Required Confined Space (PRCS) Identification
  • Regulatory Purpose and Scope of 29 CFR 1910.146

OSHA's standard for Permit-Required Confined Spaces , codified at 29 CFR 1910.146 , contains mandatory requirements for practices and procedures to protect employees in general industry from the hazards of entry into permit-required confined spaces. Confined space hazards represent some of the most dangerous conditions in occupational health and safety. The Bureau of Labor Statistics counted 1,030 U.S. worker deaths in incidents involving confined spaces from 2011 to 2018, between 88 and 166 a year, and NIOSH's national analysis estimated that about one in four confined-space victims were would-be rescuers (Suruda et al., 1994), mostly coworkers attempting to save a fallen colleague.

Employers must evaluate their workplaces to determine if any spaces are permit-required confined spaces. If a workplace contains PRCSs, the employer must inform exposed employees by posting danger signs or by any other equally effective means. A sign reading "DANGER — PERMIT-REQUIRED CONFINED SPACE, DO NOT ENTER" satisfies this notification mandate under 1910.146(c)(2).

The Three Criteria Defining a Confined Space

Under 29 CFR 1910.146(b) , a space must satisfy all three of the following physical criteria simultaneously to be legally classified as a Confined Space :

Is large enough and so configured that an employee can bodily enter and perform assigned work : The space must allow an employee's entire body (not just arms, legs, or head) to enter the structure to accomplish tasks.

Has limited or restricted means for entry or exit : Portals, manholes, hatches, ladders, or narrow doorways that restrict easy movement into or out of the space. Examples include spaces where an entrant must crawl, climb a ladder, squeeze through a narrow opening, or travel long distances to escape.

Is not designed for continuous employee occupancy : The space was engineered for storage, equipment housing, product containment, or utility distribution rather than as a primary workplace equipped with permanent lighting, ventilation, and ergonomics.

  • Common Examples of Confined Spaces
  • Boilers, storage tanks, pressure vessels, and reaction kettles
  • Silos, grain elevators, storage bins, and hoppers
  • Utility vaults, manholes, sewers, and storm drains
  • Pits, sumps, degreasers, and dip tanks
  • Pipelines, ductwork, and ship holds
  • The Four Hazards Defining a Permit-Required Confined Space (PRCS)

A Permit-Required Confined Space (PRCS) is a confined space that possesses at least one of the following four serious safety or health hazards under 29 CFR 1910.146(b): +---------------------------------------------------------------------------------+

  • | PERMIT-REQUIRED CONFINED SPACE (PRCS) |
  • | (Must meet ALL 3 Confined Space criteria + AT LEAST 1 below) |
  • +---------------------------------------------------------------------------------+
  • | 1. Hazardous Atmosphere | 2. Engulfment Hazard | 3. Inward Converging |
  • | (Oxygen, Flammables, | (Liquid or flowable | Walls or Tapered |
  • | Toxics, IDLH) | solid like grain) | Sloping Floors |
  • +---------------------------------------------------------------------------------+
  • | 4. Any Other Recognized Serious Safety or Health Hazard |
  • | (Exposed electrical, moving machinery, thermal extremes, chemical burns) |
  • +---------------------------------------------------------------------------------+
  • 1. Contains or Has a Potential to Contain a Hazardous Atmosphere

Atmospheric conditions that expose entrants to the risk of death, incapacitation, impairment of ability to self-rescue, injury, or acute illness. Hazardous atmospheres include oxygen deficiency (<19.5%) or enrichment (>23.5%), flammable gases/vapors (>10% LEL), combustible dust at or above LFL, or airborne toxics exceeding OSHA Permissible Exposure Limits (PELs).

2. Contains a Material That Has the Potential for Engulfing an Entrant

The surrounding or capture of a person by a liquid or finely divided (flowable) solid substance that can be inhaled to cause death by choking, suffocation, or drowning, or that can exert enough force on the body to cause death by strangulation or crushing. Examples include corn, wheat, sand, gravel, fly ash, water, or industrial solvents.

3. Has an Internal Configuration Such That an Entrant Could Be Trapped or Asphyxiated

Internal structures featuring inwardly converging walls or a floor that slopes downward and tapers to a smaller cross-section (such as a funnel-bottom hopper or conical bin) where an entrant can slide into a restricted zone and become wedged or suffocated.

4. Contains Any Other Recognized Serious Safety or Health Hazard

Non-atmospheric physical hazards capable of causing death or serious physical harm, such as exposed energized electrical conductors, unguarded mechanical agitators or augers, high-pressure steam pipes, extreme thermal conditions (heat stress), radiation, or toxic corrosives.

Comparative Matrix: Non-Permit vs. Permit-Required Confined Space

Classification Feature Non-Permit Confined Space Permit-Required Confined Space (PRCS)

Confined Space Criteria Meets all 3 physical criteria. Meets all 3 physical criteria.

Hazard Presence Contains NO actual or potential safety/health hazards. Contains AT LEAST ONE of the 4 qualifying hazards.

Entry Permit Required? No written permit required. Yes , full written permit signed by supervisor.

Stationed Attendant? No attendant required. Yes , dedicated attendant outside portal at all times.

Atmospheric Testing? Recommended based on risk, but not mandated by permit. Mandatory prior to entry and continuously monitored.

Rescue Capability? Standard facility emergency response. Mandatory non-entry retrieval equipment and rescue service.

Example Empty vented crawlspace with no pipes or energy lines. Storage bin with top-loading grain auger and dust potential.

Alternate Entry Procedures (29 CFR 1910.146(c)(5))

OSHA provides a streamlined compliance option known as Alternate Entry Procedures under paragraph (c)(5) . When applicable, employers may enter a PRCS without complying with full permit requirements (such as written permits, attendants, entry supervisors, and rescue teams).

Mandatory Criteria for Alternate Entry

The employer can demonstrate that the ONLY actual or potential hazard in the permit space is a hazardous atmosphere .

The employer can demonstrate that continuous forced air ventilation alone is sufficient to maintain the permit space safe for entry.

The employer develops monitoring and inspection data supporting the atmospheric stability.

If initial testing reveals a hazardous atmosphere, the space must be ventilated and retested prior to entry.

Documentation and Certification Mandate (1910.146(c)(5)(i)(E))

The employer must document the determinations and supporting data in a written certification made available to each entering employee. The certification must contain the date, the location of the space, and the signature of the person providing the certification.

Reclassification to Non-Permit Status (29 CFR 1910.146(c)(7))

Paragraph 1910.146(c)(7) allows an employer to reclassify a permit-required confined space as a non-permit confined space under strictly regulated conditions:

Complete Hazard Elimination : The space must pose no actual or potential atmospheric hazards , and all physical hazards within the space must be completely eliminated without entering the space (e.g., locking out energy sources, double blocking and bleeding piping, blanking/blinding flanges, clearing mechanical hazards).

If Entry Is Required to Eliminate Hazards : Such entry must be performed under full PRCS procedures. Once hazards are eliminated, the space may be reclassified for the duration of work.

Reclassification Certification (1910.146(c)(7)(iii)) : The employer must prepare a written certification containing the date, exact location of the space, and signature of the certifying individual.

CRITICAL OSHA INTERPRETATION : Forced air ventilation does NOT eliminate an atmospheric hazard — it merely controls or dilutes it. Therefore, a space containing an atmospheric hazard that relies on continuous forced air ventilation CANNOT be reclassified as a non-permit space under (c)(7) . It must be processed under the (c)(5) Alternate Entry Procedures .

Loading diagram... OSHA 29 CFR 1910.146 Confined Space Classification Flowchart