Study guide
7.3 PRCS Entry Roles: Entrant, Attendant, Entry Supervisor & Permit System
OSHA 511 Occupational Safety and Health Standards for General Industry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: OSH Act, Regulatory Framework & Inspection Procedures
1.1 OSH Act Purpose, Scope & General Duty Clause 1.2 OSHA Inspections, Priorities & Inspector Credentials 1.3 Citation Categories, Penalty Calculations & Contesting Procedures 1.4 Employer Rights, Employee Rights & Whistleblower Protections 1.5 Navigating 29 CFR: Standards Organization, Codification & Rulemaking 1.6 Safety & Health Programs, Cooperative Programs & Multi-Employer Worksites
2 Chapter 2: OSHA Recordkeeping & Reporting (29 CFR Part 1904)
2.1 Recording Criteria, Exclusions & First Aid vs. Medical Treatment 2.2 OSHA Recordkeeping Forms (Forms 300, 300A, 301) & Annual Summary Posting 2.3 Severe Injury Reporting Timelines, Privacy Cases & Electronic Submission
3 Chapter 3: Walking-Working Surfaces & Emergency Preparedness (Subparts D & E)
3.1 General Walking-Working Surface Requirements & Housekeeping (1910.22) 3.2 Ladders, Stairways, Scaffolds & Dockboards (1910.23-26) 3.3 Fall Protection Systems, Falling Object Protection & Training (1910.28-30) 3.4 Exit Routes, Emergency Action Plans (EAPs) & Fire Prevention Plans (1910.34-39) 3.5 Fire Protection (Subpart L): Extinguishers, Fixed Systems, Detection & Employee Alarms (1910.155-1910.165)
4 Chapter 4: Hazard Communication & GHS Standard (29 CFR 1910.1200)
4.1 Hazard Communication Standard Overview & Written HazCom Program 4.2 GHS Chemical Hazard Classification & Physical vs. Health Hazards 4.3 GHS Labels, Signal Words & 9 GHS Pictograms 4.4 Safety Data Sheets (16-Section SDS Format) & Employee Information/Training
5 Chapter 5: Personal Protective Equipment & Respiratory Protection (Subpart I)
5.1 Hierarchy of Controls & Hazard Assessment Certification (1910.132) 5.2 Eye, Face, Head, Foot & Hand Protection Standards (1910.133-138) 5.3 Respiratory Protection Program, Fit Testing & Medical Evaluations (1910.134) 5.4 Assigned Protection Factors (APFs), Maximum Use Concentrations & Respirator Selection
6 Chapter 6: Control of Hazardous Energy / Lockout/Tagout (29 CFR 1910.147)
6.1 Energy Control Program & Authorized vs. Affected Employee Roles 6.2 Lockout/Tagout Procedural Steps & Stored Energy Isolation 6.3 Special LOTO Situations: Group LOTO, Shift Changes & Outside Contractors 6.4 Periodic Annual Inspection, LOTO Hardware & Removal of Energy Controls
7 Chapter 7: Permit-Required Confined Spaces (29 CFR 1910.146)
7.1 Confined Space vs. Permit-Required Confined Space (PRCS) Identification 7.2 Atmospheric Testing Sequence, Testing Equipment & Acceptable Limits 7.3 PRCS Entry Roles: Entrant, Attendant, Entry Supervisor & Permit System 7.4 Non-Entry Rescue, Retrieval Systems & Emergency Response Services
8 Chapter 8: Electrical Safety & Safe Work Practices (Subpart S)
8.1 General Electrical Safety, NRTL Listing & Equipment Guarding (1910.303) 8.2 System Grounding, Ground-Fault Circuit Interrupters (GFCIs) & Wiring (1910.304-305) 8.3 Electrical Safe Work Practices, Qualified Persons & Approach Boundaries (1910.331-335) 8.4 Arc Flash Hazards, Personal Protective Equipment & Rubber Insulating Gloves
9 Chapter 9: Machine Guarding & Materials Handling (Subparts N & O)
9.1 General Machine Guarding Requirements & Safeguard Types (1910.212) 9.2 Mechanical Power Presses, Point of Operation & Power Transmission Guarding (1910.217, 1910.219) 9.3 Powered Industrial Trucks (Forklifts): Operator Training, Retraining & Safe Operation (1910.178) 9.4 Materials Handling, Storage, Slings & Overhead Cranes (1910.176, 1910.179, 1910.184) 9.5 Hand & Portable Powered Tools (Subpart P, 1910.241-1910.244)
10 Chapter 10: Occupational Health, Industrial Hygiene & Process Safety (Subparts G & Z)
10.1 Occupational Noise Exposure, Sound Levels & Hearing Conservation Program (1910.95) 10.2 Toxic & Hazardous Substances, Table Z-1 PELs & Industrial Hygiene Paradigm (1910.1000) 10.3 Specific Health Standards: Asbestos, Lead, Bloodborne Pathogens & Methylene Chloride 10.4 Process Safety Management (PSM) of Highly Hazardous Chemicals (1910.119 - 14 Elements) 10.5 Flammable Liquids (1910.106) & Welding, Cutting, and Brazing Safety (1910.252) 10.6 Hazardous Materials (Subpart H): Compressed Gases, Spray Finishing & HAZWOPER (1910.101, 1910.107, 1910.120) 10.7 General Environmental Controls & First Aid: Sanitation, Color Codes, Signs & Tags, Medical Services (Subparts J & K)
7.3 PRCS Entry Roles: Entrant, Attendant, Entry Supervisor & Permit System
Key Takeaways Explain This Topic AI
OSHA defines three explicit operational entry roles under 29 CFR 1910.146: Authorized Entrant, Authorized Attendant, and Entry Supervisor.
The Attendant's duty under 1910.146(i)(4) is to remain outside the permit space until relieved by another attendant.
The Entry Supervisor is responsible for verifying permit details, signing the permit to authorize entry, and terminating entry when work is completed or prohibited conditions occur.
An Entry Permit under 1910.146(f) must contain 14 specific elements, including hazard controls, testing results, personnel names, and rescue service contact details.
Canceled entry permits must be retained for at least 1 year under 1910.146(e)(6) to support the annual permit-space program review required by 1910.146(d)(14).
Last updated: November 2026
- 7.3 PRCS Entry Roles: Entrant, Attendant, Entry Supervisor & Permit System
- Overview of Defined Entry Roles (29 CFR 1910.146(h), (i), (j))
OSHA's Permit-Required Confined Space standard establishes clear division of responsibilities to ensure safe entry operations. The standard defines three distinct roles: Authorized Entrant , Attendant , and Entry Supervisor . Each individual participating in a permit space entry must be trained and proficient in their assigned duties.
1. Authorized Entrant (29 CFR 1910.146(h))
An Authorized Entrant is an employee who is authorized by the employer to enter a permit space. Entrants are exposed directly to the internal space environment.
Core Responsibilities of Authorized Entrants
Know Space Hazards : Understand the hazards that may be faced during entry, including information on the mode, signs or symptoms, and consequences of exposure.
Properly Use Equipment : Correctly operate testing, monitoring, ventilating, lighting, communication, personal protective (PPE), ladders, and retrieval equipment.
Maintain Communication : Communicate with the attendant as necessary to enable the attendant to monitor entrant status and enable the attendant to alert entrants of the need to evacuate.
Alert the Attendant : Immediately notify the attendant whenever the entrant recognizes any warning sign or symptom of exposure to a dangerous situation, or detects a prohibited condition.
Evacuate Immediately : Exit the permit space as quickly as possible whenever:
An order to evacuate is given by the attendant or entry supervisor.
The entrant recognizes any warning sign or symptom of exposure.
An automatic evacuation alarm triggers (e.g., continuous multi-gas monitor alarm).
2. Authorized Attendant (29 CFR 1910.146(i))
An Attendant is an individual stationed outside one or more permit spaces who monitors the authorized entrants and performs all attendant's duties assigned in the employer's permit space program. +---------------------------------------------------------------------------------+
- | THE ATTENDANT's ABSOLUTE MANDATE |
- +---------------------------------------------------------------------------------+
- | 1. REMAIN STATIONED OUTSIDE THE PERMIT SPACE AT ALL TIMES DURING ENTRY. |
- | 2. NEVER ENTER THE SPACE TO PERFORM RESCUE UNDER ANY CIRCUMSTANCES |
- | (Unless properly relieved by another trained attendant AND executing |
- | non-entry retrieval or authorized dual-role rescue protocol). |
- | 3. MAINTAIN CONTINUOUS COUNT AND IDENTIFICATION OF ALL ENTRANTS. |
- | 4. ORDER IMMEDIATE EVACUATION UPON DETECTING PROHIBITED CONDITIONS. |
- +---------------------------------------------------------------------------------+
- Core Responsibilities of Attendants
Continuous Stationing : Remains outside the permit space portal during entry operations until relieved by another qualified attendant.
Entrant Count & Identification : Maintains an accurate count of authorized entrants in the permit space and ensures that the permit accurately identifies who is inside.
Communication & Monitoring : Communicates with entrants as necessary to monitor status; monitors activities inside and outside the space to determine if it remains safe.
Order Evacuation : Orders entrants to evacuate the permit space immediately under any of the following conditions:
Detection of a prohibited condition.
Detection of behavioral changes or symptoms of hazard exposure in an entrant.
Detection of a situation outside the space that could endanger entrants (e.g., generator exhaust fumes blowing into ventilation intake).
If the attendant cannot effectively perform all assigned duties.
Summon Rescue : Summons rescue and other emergency services as soon as the attendant determines that entrants need assistance to escape.
Perform Non-Entry Rescue : Operates mechanical retrieval winches to pull entrants out during emergencies.
No Distracting Duties : Performs no duties that might interfere with the attendant's primary duty to monitor and protect entrants.
3. Entry Supervisor (29 CFR 1910.146(j))
The Entry Supervisor is the person (such as a foreman, crew chief, or safety manager) responsible for determining if acceptable entry conditions are present, authorizing entry, overseeing entry operations, and terminating entry as required.
Core Responsibilities of Entry Supervisors
Verify Permit & Tests : Knows space hazards; verifies that appropriate entries have been made on the permit, that all tests specified by the permit have been conducted, and that all procedures/equipment are in place before signing.
Authorize Entry : Signs the entry permit to authorize entry to begin.
Verify Rescue Services : Determines that rescue services are available and that the means for summoning them are operational.
Maintain Acceptable Entry Conditions : Removes unauthorized individuals who attempt to enter or who enter the permit space.
Terminate Entry & Cancel Permit : Cancels the permit when entry operations are completed or when a prohibited condition arises.
Comparative Matrix of PRCS Roles
Operational Aspect Authorized Entrant Stationed Attendant Entry Supervisor
Primary Location Inside the permit space. Outside the permit portal. On-site / Available.
Rescue Function Self-rescue / Evacuate. Summons rescue & non-entry winch. Verifies rescue team readiness.
Key Authority Can declare symptom & exit. Can order mandatory evacuation. Authorizes entry & cancels permit.
Permit Action Signs in/out on log. Monitors log & entrant names. Formally signs & authorizes permit.
The Entry Permit System (29 CFR 1910.146(f))
The Entry Permit is a written or printed document provided by the employer to allow and control entry into a permit space. Under 1910.146(f) , the permit must document 14 mandatory content items :
Permit space to be entered and location.
Purpose of the entry.
Date and authorized duration of the permit.
Names of authorized entrants.
Names of current attendants.
Name and signature of the entry supervisor.
Hazards of the permit space to be entered.
Measures used to isolate the space and eliminate/control hazards (LOTO, ventilation, blinding).
Acceptable entry conditions.
Results of initial and periodic atmospheric tests (accompanied by names of testers and test times).
Rescue and emergency services that can be summoned and contact methods.
Communication procedures used by entrants and attendants.
Equipment required (PPE, testing, alarm, rescue, lighting).
Any other necessary information or additional permits (e.g., Hot Work Permit).
Posting and Cancellation Requirements
Posting : The completed permit must be posted at the entry portal or made equally available to all entrants before entry begins.
Cancellation : The entry supervisor must cancel the permit when entry operations are completed OR when a prohibited condition arises in or near the space.
1-Year Record Retention Rule (1910.146(e)(6)) : The employer must retain each canceled entry permit for at least 1 year after cancellation. 1910.146(d)(14) then requires the employer to review the permit-space program using those retained permits within 1 year after each entry, revising the program as necessary. Keep the split straight: (e)(6) = retention; (d)(14) = annual program review.