Study guide
2.2 OSHA Recordkeeping Forms (Forms 300, 300A, 301) & Annual Summary Posting
OSHA 511 Occupational Safety and Health Standards for General Industry Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: OSH Act, Regulatory Framework & Inspection Procedures
1.1 OSH Act Purpose, Scope & General Duty Clause 1.2 OSHA Inspections, Priorities & Inspector Credentials 1.3 Citation Categories, Penalty Calculations & Contesting Procedures 1.4 Employer Rights, Employee Rights & Whistleblower Protections 1.5 Navigating 29 CFR: Standards Organization, Codification & Rulemaking 1.6 Safety & Health Programs, Cooperative Programs & Multi-Employer Worksites
2 Chapter 2: OSHA Recordkeeping & Reporting (29 CFR Part 1904)
2.1 Recording Criteria, Exclusions & First Aid vs. Medical Treatment 2.2 OSHA Recordkeeping Forms (Forms 300, 300A, 301) & Annual Summary Posting 2.3 Severe Injury Reporting Timelines, Privacy Cases & Electronic Submission
3 Chapter 3: Walking-Working Surfaces & Emergency Preparedness (Subparts D & E)
3.1 General Walking-Working Surface Requirements & Housekeeping (1910.22) 3.2 Ladders, Stairways, Scaffolds & Dockboards (1910.23-26) 3.3 Fall Protection Systems, Falling Object Protection & Training (1910.28-30) 3.4 Exit Routes, Emergency Action Plans (EAPs) & Fire Prevention Plans (1910.34-39) 3.5 Fire Protection (Subpart L): Extinguishers, Fixed Systems, Detection & Employee Alarms (1910.155-1910.165)
4 Chapter 4: Hazard Communication & GHS Standard (29 CFR 1910.1200)
4.1 Hazard Communication Standard Overview & Written HazCom Program 4.2 GHS Chemical Hazard Classification & Physical vs. Health Hazards 4.3 GHS Labels, Signal Words & 9 GHS Pictograms 4.4 Safety Data Sheets (16-Section SDS Format) & Employee Information/Training
5 Chapter 5: Personal Protective Equipment & Respiratory Protection (Subpart I)
5.1 Hierarchy of Controls & Hazard Assessment Certification (1910.132) 5.2 Eye, Face, Head, Foot & Hand Protection Standards (1910.133-138) 5.3 Respiratory Protection Program, Fit Testing & Medical Evaluations (1910.134) 5.4 Assigned Protection Factors (APFs), Maximum Use Concentrations & Respirator Selection
6 Chapter 6: Control of Hazardous Energy / Lockout/Tagout (29 CFR 1910.147)
6.1 Energy Control Program & Authorized vs. Affected Employee Roles 6.2 Lockout/Tagout Procedural Steps & Stored Energy Isolation 6.3 Special LOTO Situations: Group LOTO, Shift Changes & Outside Contractors 6.4 Periodic Annual Inspection, LOTO Hardware & Removal of Energy Controls
7 Chapter 7: Permit-Required Confined Spaces (29 CFR 1910.146)
7.1 Confined Space vs. Permit-Required Confined Space (PRCS) Identification 7.2 Atmospheric Testing Sequence, Testing Equipment & Acceptable Limits 7.3 PRCS Entry Roles: Entrant, Attendant, Entry Supervisor & Permit System 7.4 Non-Entry Rescue, Retrieval Systems & Emergency Response Services
8 Chapter 8: Electrical Safety & Safe Work Practices (Subpart S)
8.1 General Electrical Safety, NRTL Listing & Equipment Guarding (1910.303) 8.2 System Grounding, Ground-Fault Circuit Interrupters (GFCIs) & Wiring (1910.304-305) 8.3 Electrical Safe Work Practices, Qualified Persons & Approach Boundaries (1910.331-335) 8.4 Arc Flash Hazards, Personal Protective Equipment & Rubber Insulating Gloves
9 Chapter 9: Machine Guarding & Materials Handling (Subparts N & O)
9.1 General Machine Guarding Requirements & Safeguard Types (1910.212) 9.2 Mechanical Power Presses, Point of Operation & Power Transmission Guarding (1910.217, 1910.219) 9.3 Powered Industrial Trucks (Forklifts): Operator Training, Retraining & Safe Operation (1910.178) 9.4 Materials Handling, Storage, Slings & Overhead Cranes (1910.176, 1910.179, 1910.184) 9.5 Hand & Portable Powered Tools (Subpart P, 1910.241-1910.244)
10 Chapter 10: Occupational Health, Industrial Hygiene & Process Safety (Subparts G & Z)
10.1 Occupational Noise Exposure, Sound Levels & Hearing Conservation Program (1910.95) 10.2 Toxic & Hazardous Substances, Table Z-1 PELs & Industrial Hygiene Paradigm (1910.1000) 10.3 Specific Health Standards: Asbestos, Lead, Bloodborne Pathogens & Methylene Chloride 10.4 Process Safety Management (PSM) of Highly Hazardous Chemicals (1910.119 - 14 Elements) 10.5 Flammable Liquids (1910.106) & Welding, Cutting, and Brazing Safety (1910.252) 10.6 Hazardous Materials (Subpart H): Compressed Gases, Spray Finishing & HAZWOPER (1910.101, 1910.107, 1910.120) 10.7 General Environmental Controls & First Aid: Sanitation, Color Codes, Signs & Tags, Medical Services (Subparts J & K)
2.2 OSHA Recordkeeping Forms (Forms 300, 300A, 301) & Annual Summary Posting
Key Takeaways Explain This Topic AI
OSHA recordkeeping relies on three core forms: Form 300 (Log of Work-Related Injuries and Illnesses), Form 301 (Injury and Illness Incident Report), and Form 300A (Summary of Work-Related Injuries and Illnesses).
Form 301 (or an equivalent insurance/workers' compensation form) must be completed within 7 calendar days of receiving information about a recordable case.
Form 300A synthesizes establishment-wide annual totals and must be certified by a company executive (e.g., corporate officer, owner, highest-ranking site official, or their immediate supervisor).
Employers must post the certified OSHA Form 300A in a conspicuous location where employee notices are customarily posted from February 1 through April 30 of the year following the calendar year covered.
All OSHA recordkeeping forms (Forms 300, 300A, 301) must be retained at the establishment for 5 years following the end of the calendar year they cover, and Form 300 logs must be updated for changes during that retention period.
Last updated: August 2026
2.2 OSHA Recordkeeping Forms (Forms 300, 300A, 301) & Annual Summary Posting
Under 29 CFR Part 1904 Subpart C, covered employers must document workplace injuries and illnesses using three standardized OSHA forms (or equivalent forms). Each form serves a specific analytical and administrative function within an establishment's occupational health and safety program.
Comparison of the Three Core OSHA Forms (29 CFR 1904.29)
Form Number & Name Primary Purpose Key Content & Specific Fields Completion / Posting Window
OSHA Form 300 ; (Log of Work-Related Injuries and Illnesses) Ongoing log of all recordable injuries and illnesses at an establishment Case #, employee name, job title, date of injury/onset, location, injury description, case classifications (Cols G-J), day counts (Cols K-L), illness types (Cols M1-M6) Enter within 7 calendar days of receiving case information
OSHA Form 301 ; (Injury and Illness Incident Report) Detailed individual incident report for each recordable case Employee demographics, treatment facility, attending physician, exact task being performed, event sequence, equipment/substances involved Complete within 7 calendar days of receiving case information
OSHA Form 300A ; (Summary of Work-Related Injuries and Illnesses) Annual establishment-wide summary of case totals, day totals, and employment metrics Total cases (Cols G-J), total days (Cols K-L), illness totals (Cols M1-M6), annual average employee count, total facility hours worked, executive certification signature Complete and certify by Feb 1; Post Feb 1 – April 30
Form 300: Log Mechanics & Column Classifications
The OSHA Form 300 is a line-item log where each recordable case receives a unique case number. Employers must classify each case under the single most severe outcome :
Column G (Death): Checked if the injury or illness results in death.
Column H (Days Away from Work): Checked if the employee misses one or more full workdays after the day of injury. The total number of missed workdays is entered in Column K (capped at 180 calendar days).
Column I (Remained at Work - Job Transfer or Restriction): Checked if the employee is placed on restricted duty or transferred to another job without missing full workdays. The total number of restricted/transfer days is entered in Column L (capped at 180 calendar days).
Column J (Other Recordable Cases): Checked if the case involves medical treatment beyond first aid, loss of consciousness, or a diagnosed significant injury/illness, but involves zero days away and zero days of restriction/transfer.
Illness Category Subcolumns (Columns M1 – M6)
In addition to outcome classification, injuries and illnesses are categorized by nature:
M1 — Injury: Cuts, fractures, sprains, amputations.
M2 — Skin Disorder: Contact dermatitis, eczema, rash caused by workplace chemicals.
M3 — Respiratory Condition: Silicosis, asbestosis, occupational asthma, pneumonitis.
M4 — Poisoning: Lead, mercury, carbon monoxide, or solvent toxicity.
M5 — Hearing Loss: Work-related Standard Threshold Shift (STS) of 10 dB or more at 2000, 3000, and 4000 Hz in one or both ears.
M6 — All Other Illnesses: Heatstroke, sunstroke, frostbite, radiation illness.
Form 301: Incident Report & Equivalent Forms
Form 301 collects detailed narrative information regarding how the injury or illness occurred. It requires answers to four key descriptive questions:
What was the employee doing just before the incident occurred?
How did the injury or illness occur?
What was the specific injury or illness, and what body part was affected?
What object, substance, or tool directly harmed the employee?
Equivalent Forms
Employers may use state workers' compensation forms, insurance loss reports, or electronic reporting systems in place of OSHA Form 301 only if the alternative form contains every single data element required on Form 301 (including healthcare provider details, treatment site, and exact incident mechanics).
Form 300A: Annual Summary, Hours Calculation & Executive Certification (29 CFR 1904.32)
At the end of each calendar year, employers must tally the entries on Form 300 and transfer the totals to Form 300A.
Zero-Case Requirement
Even if an establishment experienced zero recordable injuries or illnesses during the entire calendar year, the employer must still complete Form 300A by entering zeros in the summary columns, completing establishment details, obtaining executive certification, and posting the form.
Employment & Hours Metrics
Form 300A requires two establishment-wide operating metrics:
Annual Average Number of Employees: Calculated by averaging total headcount (full-time, part-time, seasonal, temporary) across all pay periods during the year.
Total Hours Worked by All Employees: Actual hours worked by all employees during the year. Excludes paid time off (vacation, sick leave, holidays, PTO). DART Rate = ( Total Column H Cases + Total Column I Cases Total Hours Worked by All Employees ) × 200 , 000 \text{DART Rate} = \left( \frac{\text{Total Column H Cases} + \text{Total Column I Cases}}{\text{Total Hours Worked by All Employees}} \right) \times 200,000 DART Rate = ( Total Hours Worked by All Employees Total Column H Cases + Total Column I Cases ) × 200 , 000
Executive Certification Protocol (29 CFR 1904.32(b)(4))
Form 300A cannot be certified by a safety manager, human resources representative, or external consultant unless that person holds explicit corporate executive authority. Under 29 CFR 1904.32(b)(4), the executive signature must be provided by one of the following four qualified individuals:
An owner of the company (if a sole proprietorship or partnership).
An officer of the corporation (e.g., CEO, President, Vice President).
The highest-ranking company official working at the establishment (e.g., Plant Manager, General Manager).
The immediate supervisor of the highest-ranking company official working at the establishment.
By signing, the executive certifies under penalty of law that they have reviewed the document and reasonably believe the summary is true, accurate, and complete.
Posting Requirements & Posting Window (29 CFR 1904.32(b)(6))
Mandatory Posting Window: Employers must post the certified Form 300A from February 1 through April 30 of the year following the calendar year covered.
Location: In conspicuous places where notices to employees are customarily posted (e.g., employee break rooms, main bulletin boards, safety kiosks). For remote or mobile workforces, posting via an electronic employee portal is permissible if all workers have daily electronic access.
Privacy Protection: Form 300A displays only aggregate establishment totals and contains zero employee names, protecting worker medical confidentiality while keeping staff informed of workplace safety performance.
- Form Retention, Maintenance & Duty to Update (29 CFR 1904.33)
- The 5-Year Retention Rule
Employers must retain OSHA Forms 300, 300A, and 301 (and associated privacy key lists) at the establishment for 5 years following the end of the calendar year covered by the records. For example, records for calendar year 2025 must be retained through December 31, 2030.
Duty to Update Form 300 Logs
During the 5-year retention period, employers are legally required to update saved Form 300 logs whenever:
A newly discovered recordable injury or illness from that past year comes to light.
The classification of a previously recorded case changes (e.g., a restricted work case evolves into days away from work, or an injured employee subsequently dies from the injury).
Note: Employers are not required to update past Form 300A annual summaries or Form 301 incident reports.