Study guide
1.3 Barbershop Licensing, Space, Equipment & Sanitation Standards
Pennsylvania State Barber Licensing Exam Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pennsylvania Laws, Regulations, and Licensure Framework
1.1 Pennsylvania State Board of Barber Examiners & Statutory Authority 1.2 Licensure Classifications, Training Hours, Endorsement & Reciprocity 1.3 Barbershop Licensing, Space, Equipment & Sanitation Standards 1.4 License Renewal, Biennial Cycles, Act 48 Citations & Board Disciplinary Actions
2 Chapter 2: Infection Control, Microbiology, and Safety Standards
2.1 Principles of Infection Control: Cleaning, Disinfection, and Sterilization 2.2 Microbiology: Pathogenic Bacteria, Viruses, Fungi, and Parasites 2.3 EPA-Registered Disinfectants, Chemical Safety, and SDS Protocols 2.4 OSHA Standards, Bloodborne Pathogens & Exposure Incident Procedures
3 Chapter 3: Hair and Scalp Anatomy, Physiology, and Trichology
3.1 Histology & Structure of the Hair and Scalp 3.2 Hair Growth Cycles, Physical Properties & Analysis 3.3 Scalp and Hair Disorders: Contagious vs. Non-Contagious Conditions
4 Chapter 4: Barber Tools, Implements, and Equipment
4.1 Professional Shears, Thinning Shears & Cutting Implements 4.2 Clippers, Trimmers, Motors, and Blade Mechanics 4.3 Straight Razors, Honing Stones, and Leather Stropping
5 Chapter 5: Haircutting and Hairstyling
5.1 Haircutting Foundations: Reference Points, Angles, and Elevation 5.2 Classic Tapers, Fades, and Neckline Finishes 5.3 Clipper-Over-Comb, Shear-Over-Comb & Texturizing Techniques 5.4 Head Shapes, Facial Proportions, and Customized Hair Design 5.5 Wet Styling, Blow-Dry Styling, and Thermal Styling 5.6 Braiding, Artificial Hair, and Professional Styling Products
6 Chapter 6: Professional Shaving and Facial Hair Design
6.1 Fundamentals of Facial Shaving: Client Consultation, Draping & Skin Prep 6.2 The 14 Standard Shaving Zones, Razor Strokes & Skin Stretching 6.3 Specialized Shaves: Head Shaving, Neck Shaves & Ingrown Hair Management 6.4 Beard and Mustache Design, Trimming, and Maintenance
7 Chapter 7: Scalp Treatments, Facial Services, and Electrotherapy
7.1 Scalp and Hair Conditioning Treatments & Manipulations 7.2 Professional Facial Treatments, Skin Types & Massage Movements 7.3 Electrotherapy and Light Therapy in Barbering
8 Chapter 8: Chemical Texture Services: Perming and Relaxing
8.1 Chemical Texture Science: Bonds, pH, and Action on Hair 8.2 Permanent Waving: Chemistry, Rod Wrapping, and Neutralization 8.3 Chemical Hair Relaxing: Hydroxide vs. Thio Relaxers & Safety 8.4 Chemical Service Safety: Consultation, Strand Tests & Scalp Protection
9 Chapter 9: Haircoloring and Lightening Services
9.1 Principles of Color Theory and Law of Color in Barbering 9.2 Haircolor Formulations: Non-Oxidative vs. Oxidative Colors 9.3 Lightening, Decolorizing & Haircolor Safety Protocols
10 Chapter 10: Barbershop Management, Business Law, and Professional Ethics
10.1 Barbershop Business Operations: Ownership Structures, Leases & Insurance 10.2 Employment Law, Independent Contractor vs. Employee Status & Taxes 10.3 Professional Ethics, Client Communication, and Retention
1.3 Barbershop Licensing, Space, Equipment & Sanitation Standards
Key Takeaways Explain This Topic AI
A barbershop may not open, change hands, or relocate until an application is filed with the Board and the shop is inspected, approved, and registered under 49 Pa. Code § 3.51.
Section 3.53 states space in linear dimensions, not square feet: a minimum width of 12 feet, and a minimum length of 15 feet for a one-chair shop, 20 feet for a two-chair shop, plus 5 additional feet for each further chair.
A barbershop may not be located in a food store, soft drink parlor, restaurant, or coffee shop unless separated by a solid floor-to-ceiling partition; a door in that partition is permitted but must be kept closed.
The four-step implement procedure in § 3.55 is cleanse, disinfect, rinse with clean water and dry with clean towels, then store in a clean, dry, closed container clearly marked as such.
Sharp implements must be stored upright with the points down, freshly laundered towels must be kept in a closed dustproof container, and waste containers must be thoroughly cleaned every 24 hours.
Last updated: August 2026
1.3 Barbershop Licensing, Space, Equipment & Sanitation Standards
Core Principle: A Pennsylvania barbershop is a licensed, inspected facility. The physical standards live in the BARBER SHOPS article of the Board regulations — 49 Pa. Code §§ 3.51 through 3.56 — and they are enforced by pre-opening inspection and by unannounced inspections thereafter. These are also the provisions that carry named civil penalties, so they are heavily examinable.
Citation Warning: Do not confuse these with §§ 3.41-3.45, which are the examination provisions (applications for examinations, examination, practical test, written test, retaking examination). Shop standards are the 3.5x series. Mixing the two is a common error in secondary study material.
1. Licenses and Permits (§ 3.51)
A barbershop may not open for business until three things have happened, in order:
- An application has been filed with the Board ;
- The shop has been inspected and approved ; and
Registration has been granted.
The same sequence is triggered again whenever a person takes over an existing shop or when a shop relocates . Buying a going concern does not let you inherit the prior owner's permit, and moving down the street is treated as a new shop.
Trade names: Trade names and fictitious names must be registered with the Corporation Bureau of the Department of State before a permit will be issued .
Display: The shop must prominently display its licenses, permits, and the regulation itself.
Manager-barber requirement: A shop license requires a licensed manager-barber , except for a single-barber operation, or a shop owned by a licensed cosmetologist operating with one barber and one cosmetologist.
- 2. Minimum General Requirements (§ 3.52)
- (a) What Every Shop Must Provide
The regulation lists these in general, qualitative terms rather than numbers:
- Adequate location
- Sufficient amount of floor space
- Ample light
- Facilities for heating
- Proper ventilation
- Clean walls and ceiling
- Flooring of hardwood, tile, composition, or linoleum in the work areas
- Readily available restroom facilities
- (b) The Food-Establishment Restriction
A barbershop may not be located in a food store, soft drink parlor, restaurant, coffee shop, or any place where foodstuffs are kept for sale other than in the original package , unless it is separated from that area by a solid partition extending from floor to ceiling .
Read the Exception Carefully. A door in that partition is permitted — the rule is that the door shall be kept closed . Answer choices that flatly prohibit any connecting door are wrong. Note also that this restriction is about food , not about residences: Chapter 3 contains no rule requiring a barbershop in a residential building to have a separate outside entrance or a doorless partition from living quarters.
(c) Shared Restrooms
When a barbershop and a cosmetology shop are side by side in the same building and owned by the same individual, partnership, or corporation , the two shops may share restroom facilities .
3. Minimum Space Requirements (§ 3.53)
This is the single most commonly misquoted provision in Pennsylvania barbering, so learn it in the form the regulation actually uses. Section 3.53 states space as linear dimensions — length and width — not as square footage.
- Requirement Standard
- Minimum width 12 feet (all shops)
- Minimum length — one-chair shop 15 feet
- Minimum length — two-chair shop 20 feet
- Each additional chair beyond two +5 feet of length
- Worked Examples
One chair: at least 12 ft wide x 15 ft long.
Two chairs: at least 12 ft wide x 20 ft long.
Three chairs: 20 + 5 = 25 ft minimum length.
Five chairs: 20 + (3 x 5) = 35 ft minimum length.
The Fabricated Formula. Prep material widely circulates a rule of "180 square feet for the first chair plus 60 square feet for each additional chair," sometimes with an 8-foot ceiling minimum and a 3-foot aisle clearance. None of those figures appears in 49 Pa. Code Chapter 3. If an exam item offers a square-footage formula, treat it with suspicion; the regulation speaks in feet of length and width.
4. Minimum Equipment Requirements (§ 3.54)
Section 3.54 is an itemized checklist, and inspectors work through it literally. Note which items scale per chair and which scale per two chairs — that distinction is the examinable part.
Scaling Required Items
Per shop One barber pole or a sign indicating that barbering services are performed; a stand and mirror or equivalent; one hand mirror; a closed container for clean towels; a supply cabinet for towels and supplies; seating for at least three persons ; one clothes tree or equivalent; one cabinet or closet for cleaning supplies; one strop ; one hone ; one tweezer; disinfection solution and proper disinfection equipment; hair tonic, face lotion, cold cream, and massage cream; powder or liquid styptic
Per chair A covered waste container ; one soiled towel receptacle ; one hair clipper for each chair in operation ; two razors (at least one nondisposable); two shears ; combs; sanitary towels; two clean haircloths ; neck strips and a dispenser
Per two chairs A sanitary headrest for every two chairs ; at least one washstand for every two chairs
Core fixture One barber chair which revolves, reclines and has a headrest ; running hot and cold water in every washstand
Memory Hooks. The barber chair must do three things — revolve, recline, and have a headrest . The strop, the hone, and the tweezer are one each per shop , not per chair. The seating minimum for waiting patrons is three persons .
- 5. Maintenance and Sanitation (§ 3.55)
- General Condition of the Shop
Every barbershop shall be well lighted, well ventilated, and kept in a clean, orderly and sanitary condition .
Waste containers must be thoroughly cleaned every 24 hours.
Floors must be hardwood, linoleum, or other hard surface, in good repair .
Linens and Patron Contact
Only freshly laundered and sanitized towels may be used, a fresh one for each patron , and they must be kept in a closed dustproof container .
Headrests and neck cloths require a fresh towel or paper for each customer — this is the source of the neck-strip rule.
Towels used on a patron must be discarded into a receptacle , and may not be left lying on a workbench or washbowl .
The Four-Step Implement Procedure
Any equipment that contacts a patron's skin, scalp, or hair must go through four steps in this order: 1. CLEANSE ──> 2. DISINFECT ──> 3. RINSE with clean water ──> 4. STORE
- and DRY with clean towels (clean, dry, closed,
- clearly marked container)
Sharp implements shall be stored upright with the points down.
Only freshly disinfected implements may be used on a patron.
The barber must cleanse their hands before each customer .
Why Step 3 Matters. Candidates routinely compress the sequence to "clean then disinfect then put away" and miss the rinse and dry step. Residual disinfectant left on an implement irritates skin and corrodes steel, which is exactly why the regulation makes rinsing and drying a distinct requirement rather than an optional courtesy.
6. Entrance and Waiting Area (§ 3.56)
A barbershop and a cosmetology shop may share a common waiting area , provided each shop has a separate entrance for the ingress and egress of its patrons to their respective work areas. Read together with § 3.52(c), the picture is consistent: co-located barber and cosmetology operations under common ownership may share the waiting area and the restroom , but the work areas and their entrances stay separate .