Study guide

13.1 Nail Tips: Application and Removal

Pennsylvania Nail Technician License Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Overview and Licensure Path

1.1 Current Exam Facts 1.2 Eligibility, Application, and Fees 1.3 Exam Day, Scoring, and Retakes

2 Salon Safety and Preparation

2.1 Preparation: Sanitation 2.2 Preparation: Procedures 2.3 Safe Working Conditions

3 Chemical Labels, Storage, and Safety Data Sheets

3.1 Product Labeling 3.2 Storing Chemical Products 3.3 Safety Data Sheets

4 Sanitation, Implements, and Creams

4.1 Personal Hygiene 4.2 Implements and Tools 4.3 Single-Use Items 4.4 Applying Creams

5 Infection Control, Surfaces, and Foot Spas

5.1 Prevention of Infectious Disease 5.2 Cleaning and Disinfecting Work Surfaces 5.3 Whirlpool Pedicure Foot Tubs and Filters

6 Ethics, Communication, and Records

6.1 Professional Ethics 6.2 Client Communication 6.3 Record Keeping

7 Pennsylvania Nail Technology Licensure

7.1 Scope of Nail Technology 7.2 Education, Age, and Early Testing 7.3 Temporary Licenses and Display

8 Salons, Schools, Renewal, and Board Discipline

8.1 Nail Technology Salon Standards 8.2 Renewal, Escrow, and Reciprocity 8.3 Prohibited Acts and Civil Penalties 8.4 Salon Licensure, Inspection, and Facility Rules 8.5 Schools, Students, and Teachers 8.6 The Board, Discipline, and Criminal History

9 Nail Structure and Analysis

9.1 Nail Structure 9.2 Nail Conditions That Preclude Treatment 9.3 Health Conditions That Preclude Treatment

10 Massage Anatomy of the Hands, Arms, Feet, and Legs

10.1 Muscles, Bones, and Nerves of the Fingers, Hands, and Arms 10.2 Muscles, Bones, and Nerves of the Toes, Feet, and Legs

11 Manicure and Pedicure Products, Procedures, and Setup

11.1 Product Handling and Disposal 11.2 Manicure and Pedicure Procedures 11.3 Tools, Equipment, and Materials 11.4 Preparing Hands and Feet

12 Conditioning, Cuticles, Shaping, Buffing, and Polishing

12.1 Conditioning Nails and Cuticles 12.2 Basic Manicure and Pedicure: Service Order and Cuticle Work 12.3 Shaping and Buffing the Natural Nail 12.4 Polishing

13 Nail Tips, Acrylics, Gels, and Enhancement Tools

13.1 Nail Tips: Application and Removal 13.2 Acrylic (Liquid and Powder): Application and Removal 13.3 Gels: Application and Removal 13.4 Enhancement Tools, Equipment, and Products

14 Enhancement Maintenance and Nail Repair

14.1 Enhancement Maintenance 14.2 Nail Repair

13.1 Nail Tips: Application and Removal

Key Takeaways Explain This Topic AI

Fit the tip to the natural nail's curve. It stops at the sidewalls and covers no more than half of the natural nail plate. A tip that is too wide cuts the sidewalls, and a tip that covers most of the plate is a common cause of lifting.

Put a small amount of nail adhesive in the well, set the tip at a 45-degree angle, and rock it down until it is flush. Hold until the adhesive sets. Too much adhesive floods the cuticle and the hyponychium.

Blend the seam until the line disappears, without filing through the natural nail plate, and remove dust before any overlay.

Soak a tip off in acetone or the product's remover. Do not pry it off. Do not apply a tip over fungus, a green stain, an open wound, or a separated plate.

Last updated: October 2026

A nail tip is a pre-formed plastic extension that adds length past the free edge. Fitting it, gluing it, blending the seam, and soaking it off are standard nail-technology instruction. Milady Standard Nail Technology, 8th edition, 2021, is a reference Pearson lists for this exam, and the procedure below follows that instruction. It is not a Pennsylvania statute. Chapter 7 does not set a tip size, an adhesive amount, or a soak time.

Fitting the Tip to the Natural Nail

The tip has to follow the curve of the natural nail . Compare sizes before any glue is opened. A tip that misses that curve leaves a gap, and the gap traps air and adhesive where a lift starts.

The tip stops at the sidewalls , the borders where the plate meets the lateral folds. A tip that is too wide cuts the sidewalls. The plastic edge saws the living fold. Narrow the tip, or choose a narrower size, before you glue it. Check that width while the tip is still dry. Adhesive locks a wide tip in place, and filing the sidewall later does not repair the cut.

The well is the contact portion of the tip, the part that sits on the plate and receives adhesive. The tip should not cover more than half of the natural nail plate. A tip that covers most of the plate leaves little natural nail for adhesion. That over-coverage is a common cause of lifting. A well that crowds the proximal fold also drags adhesive toward the cuticle.

Do not apply a tip over fungus, a green stain, an open wound, or a separated plate. Fungus calls for a refusal and a medical referral. A green stain is bacterial discoloration, and covering it seals moisture in. An open wound is broken skin. A separated plate has lifted from the bed, so adhesive there can widen the separation. Skip that nail. Intact nails on the same hand may still receive a tip.

Adhesive and the 45-Degree Set

Apply a small amount of nail adhesive to the well only. Too much adhesive floods the cuticle and the hyponychium , the living seal under the free edge. Glue on that seal, or in the proximal fold, sticks skin to the plate. If adhesive reaches skin, wipe it off before it sets.

Set the tip at a 45-degree angle , then rock it down until it is flush. The angle meets the free edge first and rolls the well onto the plate so air is pushed out. Flush means no gap and no lifted corner. Hold until the adhesive sets. Letting go early lets the tip creep. Trim the plastic free edge only after the adhesive has set, and keep that shaping on the tip.

Blending the Seam

The seam is the line where plastic meets the natural plate. Blending files that line until it disappears. Stop before the file cuts through the natural nail plate. A groove remains until the nail grows out. When the line is gone, stop. Dust is removed before overlay, because tip dust and adhesive dust block the bond. Brush the dust off, then clean the plate the way the overlay system requires.

  • Step Instruction What goes wrong
  • Curve Follow the natural nail's curve A gap traps air and starts a lift
  • Width Stop at the sidewalls A tip that is too wide cuts the sidewalls
  • Coverage Cover no more than half the plate Most of the plate leaves little nail for adhesion
  • Adhesive A small amount in the well Too much floods the cuticle and the hyponychium
  • Set 45-degree angle, rock until flush, then hold Letting go early lets the tip creep
  • Blend File until the seam line disappears Filing through the plate grooves the nail
  • Removal Soak in acetone or the product's remover Prying lifts layers of the natural plate
  • Soaking a Tip Off

Removal is a soak. Soak the tip in acetone or the remover the product names. Do not invent a minute count. When the adhesive has softened, the tip comes away without force. Do not pry a tip off. Prying lifts layers of the natural plate. If the tip is still firm, soak it longer. A nipper is not a lever under the plastic. Wipe softened residue without scraping the plate. Layers lifted by a pry do not lie back down, and that thin spot holds the next enhancement poorly.

Scenario: A Tip Sized to the Whole Plate

A client with short nails wants a long square look. The size that feels secure covers nearly the whole plate and rides onto both sidewalls. Choose a tip that follows the curve, stops at the sidewalls, and covers no more than half the plate. One nail has a green stain, so that nail gets no tip. The others show no fungus, no open wound, and no separated plate. Place a small amount of adhesive in the well, set the tip at 45 degrees, and rock it until it is flush. Hold until it sets. Blend the seam without filing through the plate, and remove the dust before overlay. To remove a tip, soak it. Do not pry it.