Study guide
1.3 Legal Descriptions and Surveys
Pennsylvania Real Estate Salesperson Exam
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 National Portion: Chapter 1: Real Property Characteristics, Legal Descriptions & Property Use
1.1 Real Property vs. Personal Property 1.2 Physical and Economic Characteristics of Real Property 1.3 Legal Descriptions and Surveys 1.4 Land-Use Controls, Public & Private Restrictions, and Encumbrances
3 National Portion: Chapter 2: Forms of Ownership, Transfer & Recording of Title
2.1 Estates, Ownership Forms, Rights, and Interests 2.2 Deeds, Title Transfer, Title Insurance, and Recording
4 National Portion: Chapter 3: Property Value & Appraisal
3.1 The Concept of Value and Economic Principles 3.2 The Appraisal Process and USPAP Basics 3.3 Valuation Approaches (Sales Comparison, Cost, Income) and BPOs
5 National Portion: Chapter 4: Real Estate Contracts & Agency
4.1 Contract Types and Required Elements 4.2 Contract Performance, Breach, and Enforceability 4.3 Listing and Sales Contracts and Contingencies 4.4 Agency Relationships, Fiduciary Duties, and Disclosure
6 National Portion: Chapter 5: Real Estate Practice (Brokerage, Fair Housing, Risk)
5.1 Broker Responsibilities, Brokerage Agreements, and Compensation 5.2 Federal Fair Housing Law and Protected Classes 5.3 Advertising, Antitrust, and Risk Management
7 National Portion: Chapter 6: Property Disclosures & Environmental Issues
6.1 Property Conditions and Environmental Hazards 6.2 Disclosure Obligations, Stigmatized Property, and Liability
8 National Portion: Chapter 7: Financing & Settlement
7.1 Financing Concepts, Notes, Mortgages, and Deeds of Trust 7.2 Loan Types, Lender Requirements, PMI, and Mortgage Insurance 7.3 Federal Financing Regulations (RESPA, TILA, ECOA, TRID) 7.4 Settlement, Closing Statements, and Prorations
9 National Portion: Chapter 8: Real Estate Math Calculations
8.1 Area, Volume, and Valuation Calculations 8.2 Commission, Financing, and Interest Calculations 8.3 Proration, Transfer Tax, and Investment Math
10 Chapter 1: Pennsylvania Real Estate Commission & Licensing
1.1 State Real Estate Commission (SREC) Overview 1.2 Pennsylvania License Requirements 1.3 Pennsylvania License Types and Broker Supervision 1.4 License Maintenance and Renewal
11 Chapter 2: Pennsylvania Agency Law
2.1 Pennsylvania Agency Relationships 2.2 Dual Agency and Designated Agency in Pennsylvania 2.3 Pennsylvania Licensee Duties and Standards of Conduct 2.4 Commission and Compensation Rules
12 Chapter 3: Pennsylvania Contracts & Disclosures
3.1 Pennsylvania Purchase Contracts 3.2 Pennsylvania Seller Disclosure Requirements 3.3 Pennsylvania Escrow and Trust Account Requirements 3.4 Pennsylvania Settlement Procedures
13 Chapter 4: Pennsylvania Property Law & Special Topics
4.1 Pennsylvania Fair Housing Laws 4.2 Pennsylvania License Law Violations and Discipline 4.3 Pennsylvania Property Ownership and Rights 4.4 Pennsylvania Environmental Issues and Special Topics
1.3 Legal Descriptions and Surveys
Key Takeaways Explain This Topic AI
The three accepted legal description methods are Metes and Bounds, Rectangular (Government) Survey, and Lot and Block (recorded plat).
A metes-and-bounds description must close: it always returns to the Point of Beginning (POB).
A standard section is 1 mile square = 640 acres; a township is 6 miles square = 36 sections.
1 acre = 43,560 square feet; learn to compute acreage from fractional descriptions of a section.
A datum and benchmark establish elevation for air lots, condominium units, and subsurface rights.
Last updated: June 2026
Three Methods of Legal Description
A street address is not a legal description. The three legally sufficient methods are:
Method Key features Where used
Metes and Bounds Distances (metes) and directions/boundaries (bounds); starts and ends at the Point of Beginning (POB) Original 13 colonies, irregular parcels
Rectangular (Government) Survey Townships, ranges, and sections referenced to principal meridians and base lines Most states west of the Appalachians
Lot and Block (Recorded Plat) References a lot number and block on a recorded subdivision plat map Modern subdivisions
Metes and Bounds
A metes-and-bounds description traces the perimeter using monuments, directions, and distances. Two rules dominate the exam:
It must begin and end at the Point of Beginning (POB) — the description must close . If it does not return to the POB, the parcel is not fully enclosed and the description is defective.
Monuments (a fixed iron pin, a named oak tree, a river) control over distances if they conflict, because a physical monument is harder to fake than a written measurement.
Rectangular (Government) Survey System
The rectangular survey uses principal meridians (north-south lines) and base lines (east-west lines). The grid creates these standard units:
- Unit Size Memorize
- Township 6 miles by 6 miles = 36 square miles Contains 36 sections
- Section 1 mile by 1 mile = 1 square mile Equals 640 acres
- Acre — 43,560 square feet
Sections within a township are numbered 1 to 36 in a boustrophedonic (serpentine) pattern : Section 1 is the NE corner, numbering runs west to Section 6, drops down and runs east, snaking back and forth, ending at Section 36 in the SE corner.
Acreage math from fractional descriptions
When a parcel is described as fractions of a section, multiply the fractions and apply them to 640 acres . Read the description right to left.
Worked example: "The NW 1/4 of the SE 1/4 of Section 14."
Multiply the fractions: 1/4 x 1/4 = 1/16.
Apply to a section: 1/16 x 640 = 40 acres .
Second example: "The S 1/2 of the NE 1/4 of the NW 1/4."
Multiply: 1/2 x 1/4 x 1/4 = 1/32.
Apply: 1/32 x 640 = 20 acres .
Square-footage check: A 40-acre parcel = 40 x 43,560 = 1,742,400 sq ft . If asked for the price per acre on a $360,000 sale of that 40-acre tract: $360,000 / 40 = $9,000 per acre .
Datum, Benchmark, and Air Lots
Elevation matters for condominiums, multistory air rights, and subsurface parcels. A datum is an established reference point of elevation (the national geodetic datum is mean sea level). A benchmark is a permanent marked reference monument used by surveyors to measure elevations relative to the datum. Air lots and condominium units are described as volumes of space measured above a datum, with upper and lower elevation limits, plus a horizontal lot-and-block reference.
Trap: A condominium unit deed describes a cube of air (defined by elevations and the plat), not a slice of ground.
More acreage and price math
Fractional-section problems reward a fixed routine: multiply every fraction, multiply by 640, then carry the result into a price or per-acre question.
Compound example: "The N 1/2 of the NW 1/4 of the SE 1/4 of Section 22."
Multiply the fractions: 1/2 x 1/4 x 1/4 = 1/32.
Acres: 1/32 x 640 = 20 acres .
If this 20-acre tract sells for $250,000, price per acre = $250,000 / 20 = $12,500/acre .
Two-parcel example: A description reads "the SW 1/4 of Section 3 AND the NE 1/4 of the NW 1/4 of the same section."
First tract: 1/4 x 640 = 160 acres .
Second tract: 1/4 x 1/4 x 640 = 40 acres .
Combined: 160 + 40 = 200 acres . At $3,000/acre the value is 200 x $3,000 = $600,000 .
Square-foot bridge: To price a small lot per square foot from an acreage figure, convert with 43,560. A 0.5-acre lot is 0.5 x 43,560 = 21,780 sq ft ; at $8 per sq ft it is worth 21,780 x $8 = $174,240 .
Reading and locating a section
The township-and-range grid lets you locate any section. A township is identified by its position relative to a principal meridian (Range, east or west) and a base line (Township, north or south) — for example, "T2N, R3W" means the second tier of townships north of the base line and the third column west of the meridian. Within that 6-by-6 township, sections are numbered 1–36 in the serpentine pattern, with Section 16 historically reserved for public-school funding.
Choosing the right description method
- If the parcel is... Use... Tell-tale exam phrase
- An irregular colonial-era tract Metes and bounds "thence N 30 deg E 210 feet to an iron pin"
- Rural acreage in a survey state Rectangular survey "the NE 1/4 of Section 12, T1N, R2E"
- A platted subdivision lot Lot and block "Lot 7, Block C, Sunnyvale Plat, recorded..."
- A condo or air-rights unit Lot-and-block plus a datum/elevation "Unit 4B, between elevations 540 and 549"
Trap: A description that combines methods is valid; many recorded plats still reference an original metes-and-bounds perimeter for the whole subdivision, then assign lot-and-block numbers to the parcels inside it.