Study guide

11.3 Microbiology, Pathogens & Waterborne Disease

Pennsylvania Water and Wastewater Operator Certification Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Pennsylvania Regulatory Framework & Operator Administration

1.1 Act 11 of 2002 & 25 Pa. Code Chapter 302 Licensing 1.2 Operator Duties, Process Control Decisions & OIRC 1.3 License Renewal, Continuing Education & Facility Security

2 Chapter 2: Essential Water & Wastewater Mathematics

2.1 Volumes, Flow Rates & Detention Time Calculations 2.2 Chemical Feed, Dosage & Dilution Calculations 2.3 Loading Rates & Pumping Hydraulics Calculations

3 Chapter 3: Facility Hydraulics, Mechanical Equipment & Safety

3.1 Centrifugal & Positive Displacement Pumps 3.2 Valves, Piping & Flow Measurement Instrumentation 3.3 Workplace Safety, Confined Spaces & HazCom

4 Chapter 4: Drinking Water Treatment: Clarification & Solids Removal

4.1 Source Water & Rapid Mix Coagulation 4.2 Flocculation & Sedimentation Processes 4.3 Filtration Technologies & Backwashing Protocols

5 Chapter 5: Drinking Water Treatment: Disinfection & Chemical Processes

5.1 Chlorine Disinfection & CT Compliance 5.2 Alternative Disinfection & DBP Control 5.3 Water Softening, Iron/Manganese & Corrosion Control

6 Chapter 6: Drinking Water Distribution & Small Water Systems

6.1 Distribution Infrastructure & Storage Tanks 6.2 Water Quality Maintenance & Cross-Connection Control 6.3 Small Groundwater Systems (Classes Dc & Dn)

7 Chapter 7: Wastewater Treatment: Preliminary & Primary Treatment

7.1 Influent Characterization & Preliminary Screening 7.2 Grit Removal Systems & Velocity Control 7.3 Primary Clarification & Solids Separation

8 Chapter 8: Wastewater Treatment: Secondary Biological Processes

8.1 Activated Sludge Principles & Configurations 8.2 Activated Sludge Troubleshooting & Secondary Clarifiers 8.3 Fixed-Film Technologies & Treatment Ponds

9 Chapter 9: Nutrient Removal, Chesapeake Bay Compliance & Biosolids

9.1 Biological Nitrogen Removal (Nitrification/Denitrification) 9.2 Phosphorus Removal & Chesapeake Bay Compliance 9.3 Sludge Processing, Digestion & Biosolids Management

10 Chapter 10: Wastewater Collection, Laboratory Testing & Regulatory Reporting

10.1 Wastewater Collection Systems & Lift Stations 10.2 Sampling & Laboratory Procedures (QA/QC) 10.3 Regulatory Compliance Reporting (eDMR / DWELR) & Emergency Response

11 Chapter 11: Drinking Water Regulations, Operator Science & Residuals

11.1 Chapter 109, Part 141 Rules & Public Water System Classification 11.2 Water & Wastewater Chemistry Fundamentals 11.3 Microbiology, Pathogens & Waterborne Disease 11.4 Treatment Plant Residuals & Filter Backwash Recycling

12 Chapter 12: Alternative Filtration Technologies (Subclasses 2 through 6)

12.1 Direct Filtration (Subclass 2) 12.2 Diatomaceous Earth Filtration (Subclass 3) 12.3 Slow Sand Filtration (Subclass 4) 12.4 Cartridge & Bag Filtration (Subclass 5) 12.5 Membrane Filtration Systems Operation (Subclass 6)

13 Chapter 13: Chemical Addition & Contaminant Removal (Subclasses 8 through 10)

13.1 Chemical Addition Systems & Feed Equipment (Subclass 8) 13.2 Ion Exchange & Inorganics Removal (Subclass 9) 13.3 Aeration, Air Stripping & Activated Carbon Adsorption (Subclass 10)

14 Chapter 14: Disinfection Technology Subclasses (11 through 14)

14.1 Gaseous Chlorine Feed Systems (Subclass 11) 14.2 Nongaseous Chemical Disinfection Systems (Subclass 12) 14.3 Ultraviolet Disinfection Systems (Subclass 13) 14.4 Ozone Generation & Contacting Systems (Subclass 14)

15 Chapter 15: Plant Support Systems: Electrical, Maintenance & Instrumentation

15.1 Electrical Fundamentals & Motor Control 15.2 Preventive & Corrective Maintenance Programs 15.3 Instrumentation, SCADA & Online Analyzer Calibration

16 Chapter 16: Wastewater Effluent Disinfection, Lagoon Control & Industrial Pretreatment

16.1 Wastewater Effluent Disinfection & Dechlorination 16.2 Lagoon Process Control, Sludge Surveys & Seasonal Discharge 16.3 Industrial Pretreatment Programs

11.3 Microbiology, Pathogens & Waterborne Disease

Key Takeaways Explain This Topic AI

The three categories of microorganism agents of waterborne disease are bacteria, protozoa and viruses, and chlorine resistance increases across them from bacteria to viruses to Giardia cysts to Cryptosporidium oocysts, which is why Cryptosporidium is controlled by filtration, ultraviolet light or ozone rather than by free chlorine.

E. coli is the only microbiological parameter regulated by a maximum contaminant level; Cryptosporidium, Giardia, viruses, Legionella, total coliform, fecal coliform and heterotrophic plate count are all treatment-technique parameters.

A coliform sample is 100 mL, reported as presence or absence, must reach incubation within 30 hours, and needs sodium thiosulfate in the bottle when the water carries a residual.

Fewer than 40 samples per month with two or more coliform positives triggers a Level 1 assessment by the system, while an E. coli MCL violation triggers a Level 2 assessment by a party approved by DEP.

In activated sludge, stalked ciliates and rotifers indicate a well-oxygenated, properly loaded sludge, while dispersed growth and free-swimming ciliates indicate a young, overloaded sludge.

Last updated: September 2026

The Four Groups of Waterborne Agents

DEP's General Overview module states the exam-level framing directly: the three categories of microorganism agents of waterborne disease are bacteria, protozoa and viruses . Helminths and algae are added below because operators encounter them, but a question asking for the categories of waterborne disease agents is asking for those three. DEP also teaches two facts that surprise candidates: drinking water disease outbreaks most often involve groundwater systems , not surface water plants, and the common sources of waterborne pathogens are waterfowl droppings, septic fields and farm runoff .

Group Size range Representative organisms Key operating fact

Bacteria 0.2 to 10 microns Escherichia coli, Salmonella, Shigella, Campylobacter, Legionella Readily inactivated by free chlorine at normal CT values

Viruses 0.01 to 0.1 micron Norovirus, hepatitis A, enteroviruses Too small to filter reliably by granular media; controlled by disinfection, and the Ground Water Rule requires 4-log virus inactivation where treatment is credited

Protozoa 3 to 15 microns Giardia lamblia cysts, Cryptosporidium parvum oocysts Environmentally hardy; Cryptosporidium is highly resistant to free chlorine

Helminths and algae 10 microns and larger Parasitic worms, cyanobacteria producing taste, odor and toxins Removed physically; cyanotoxins require oxidation or adsorption

Named Organisms and the Diseases They Cause

Exam items pair the organism with its illness. The list below follows DEP's disinfection and general-overview modules.

  • Organism Type Disease
  • Salmonella Bacterium Salmonellosis
  • Shigella Bacterium Bacillary dysentery
  • Salmonella typhi (older DEP module name Bacillus typhosus ) Bacterium Typhoid fever
  • Salmonella paratyphi Bacterium Paratyphoid fever
  • Vibrio cholerae Bacterium Cholera
  • Legionella pneumophila Bacterium Legionnaires' disease and Pontiac fever
  • Giardia lamblia Protozoan Giardiasis
  • Cryptosporidium parvum Protozoan Cryptosporidiosis
  • Hepatitis A virus Virus Infectious hepatitis
  • Norovirus and enteroviruses Virus Acute gastroenteritis
  • What Makes a Usable Indicator Organism

DEP lists the properties an indicator must have before it can substitute for direct pathogen testing. An exam question that asks why total coliform is used instead of testing for Salmonella is testing this list. An ideal indicator is:

  • Present in large numbers in fecal matter
  • Present whenever the pathogen is present
  • Present at a high ratio of indicators to pathogens
  • Stable and non-pathogenic itself
  • Absent in uncontaminated water
  • At least as resistant to treatment as the pathogen, and similarly affected by natural conditions
  • Detectable by a simple, inexpensive, fast and accurate laboratory test suitable for all water types
  • How Each Organism Is Regulated

Only one microbiological parameter carries a maximum contaminant level. Everything else is controlled by a treatment technique, which is why operating performance rather than a finished water number is the compliance evidence.

  • Parameter Regulated as Goal
  • Cryptosporidium Treatment technique Zero
  • Giardia lamblia Treatment technique Zero
  • Enteric viruses Treatment technique Zero
  • Legionella Treatment technique Zero
  • Total coliform Treatment technique Zero
  • Fecal coliform Treatment technique Zero
  • Heterotrophic plate count Treatment technique Not applicable
  • Escherichia coli Maximum contaminant level Zero
  • The Chlorine Resistance Ladder

Ranked from easiest to hardest to inactivate with free chlorine:

  • Vegetative bacteria (easiest)
  • Enteric viruses
  • Giardia cysts
  • Cryptosporidium oocysts (essentially chlorine resistant at practical doses)
  • Bacterial spores

This ranking is the entire justification for the multiple barrier approach. Because free chlorine cannot be relied on for Cryptosporidium, the barrier for that organism is physical removal by filtration , supplemented where required by ultraviolet light , which inactivates protozoa at very low doses, or ozone . It is also why a turbidity excursion is treated as a public health event rather than an aesthetic one.

Indicator Organisms and What a Positive Actually Means

Operators do not test for every pathogen. They test for indicators:

Total coliform is a broad group of bacteria common in soil, vegetation and the intestines of warm-blooded animals. A total coliform positive in the distribution system indicates a possible pathway for contamination, such as a main break, a cross connection, loss of pressure, biofilm or a sampling error. Under the Revised Total Coliform Rule it triggers repeat sampling and, if repeats confirm, a Level 1 assessment performed by the system or a Level 2 assessment performed by a party acceptable to DEP.

Escherichia coli is specific to fecal contamination. A confirmed E. coli MCL violation is an acute violation requiring Tier 1 notification within 24 hours.

Heterotrophic plate count measures general bacterial population; a rising HPC with a falling chlorine residual signals biofilm growth and excessive water age.

Sampling Rules and the Assessment Triggers

A coliform result is only defensible if the sample was collected and handled correctly, and those handling rules are testable:

The standard sample volume is 100 mL regardless of the analytical method used.

Systems determine presence or absence only ; a density or count is not required.

Time from collection to the start of test-medium incubation may not exceed 30 hours .

When the water carries a chlorine residual, sodium thiosulfate is added to the bottle before sterilization so residual chlorine cannot keep killing organisms in transit and produce a false negative.

Under Pennsylvania's Chapter 109 adoption of the Revised Total Coliform Rule, the results drive a find-and-fix assessment rather than an automatic violation:

  • Trigger Level 1 assessment Level 2 assessment
  • System takes fewer than 40 samples per month Two or more total-coliform-positive samples in the month —
  • System takes 40 or more samples per month More than 5.0 percent of samples total-coliform-positive —
  • Repeat sampling Failure to take every required repeat sample —
  • E. coli — E. coli MCL violation
  • Repeat occurrence — Second Level 1 trigger in a rolling 12-month period

A Level 1 assessment is performed by the system itself ; a Level 2 assessment must be conducted by a party approved by DEP . Either way, any sanitary defect found must be corrected, and the correction is the treatment-technique compliance action.

Distribution System Biology

Two problems dominate:

Biofilm. Bacteria colonize pipe walls inside a protective polysaccharide matrix that shields them from disinfectant. Biofilm consumes residual, causes coliform positives without any external contamination, and is controlled by maintaining residual, flushing dead ends and reducing water age.

Nitrification. In chloraminated systems, excess free ammonia feeds ammonia-oxidizing bacteria that convert ammonia to nitrite. The signature is a falling total chlorine residual with rising nitrite and rising HPC , usually first in a low-turnover storage tank. Controls are tighter chlorine-to-ammonia ratio management, tank turnover, flushing, and a temporary free chlorine burn.

Legionella grows in warm, stagnant water and inside biofilm, particularly in premise plumbing and in poorly turned-over storage. Residual maintenance and storage turnover are the operator's tools.

Wastewater Microbiology

An activated sludge basin is a managed ecosystem, and the microscope is a process control instrument:

  • Organism observed What it indicates
  • Dispersed growth, few higher organisms Very young sludge, high food-to-microorganism ratio, turbid effluent
  • Free-swimming ciliates dominant Sludge still young; solids retention time increasing
  • Stalked ciliates and rotifers dominant Well-flocculated, properly loaded sludge producing a clear effluent
  • Rotifers and nematodes dominant with pin floc Old sludge, low food-to-microorganism ratio, over-oxidized

Filamentous organisms bridging floc Bulking sludge; sludge volume index rises and the secondary clarifier blanket climbs

Two functional groups matter most. Heterotrophs consume carbonaceous BOD quickly and tolerate a wide range of conditions. Autotrophic nitrifiers (Nitrosomonas converting ammonia to nitrite, Nitrobacter converting nitrite to nitrate) grow slowly, need a long solids retention time, consume about 7.1 mg/L of alkalinity as calcium carbonate per mg/L of ammonia nitrogen oxidized , and stall in cold water or at low pH. Losing nitrification in January is a microbiology problem before it is a permit problem.