Study guide
7.2 Grit Removal Systems & Velocity Control
Pennsylvania Water and Wastewater Operator Certification Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Pennsylvania Regulatory Framework & Operator Administration
1.1 Act 11 of 2002 & 25 Pa. Code Chapter 302 Licensing 1.2 Operator Duties, Process Control Decisions & OIRC 1.3 License Renewal, Continuing Education & Facility Security
2 Chapter 2: Essential Water & Wastewater Mathematics
2.1 Volumes, Flow Rates & Detention Time Calculations 2.2 Chemical Feed, Dosage & Dilution Calculations 2.3 Loading Rates & Pumping Hydraulics Calculations
3 Chapter 3: Facility Hydraulics, Mechanical Equipment & Safety
3.1 Centrifugal & Positive Displacement Pumps 3.2 Valves, Piping & Flow Measurement Instrumentation 3.3 Workplace Safety, Confined Spaces & HazCom
4 Chapter 4: Drinking Water Treatment: Clarification & Solids Removal
4.1 Source Water & Rapid Mix Coagulation 4.2 Flocculation & Sedimentation Processes 4.3 Filtration Technologies & Backwashing Protocols
5 Chapter 5: Drinking Water Treatment: Disinfection & Chemical Processes
5.1 Chlorine Disinfection & CT Compliance 5.2 Alternative Disinfection & DBP Control 5.3 Water Softening, Iron/Manganese & Corrosion Control
6 Chapter 6: Drinking Water Distribution & Small Water Systems
6.1 Distribution Infrastructure & Storage Tanks 6.2 Water Quality Maintenance & Cross-Connection Control 6.3 Small Groundwater Systems (Classes Dc & Dn)
7 Chapter 7: Wastewater Treatment: Preliminary & Primary Treatment
7.1 Influent Characterization & Preliminary Screening 7.2 Grit Removal Systems & Velocity Control 7.3 Primary Clarification & Solids Separation
8 Chapter 8: Wastewater Treatment: Secondary Biological Processes
8.1 Activated Sludge Principles & Configurations 8.2 Activated Sludge Troubleshooting & Secondary Clarifiers 8.3 Fixed-Film Technologies & Treatment Ponds
9 Chapter 9: Nutrient Removal, Chesapeake Bay Compliance & Biosolids
9.1 Biological Nitrogen Removal (Nitrification/Denitrification) 9.2 Phosphorus Removal & Chesapeake Bay Compliance 9.3 Sludge Processing, Digestion & Biosolids Management
10 Chapter 10: Wastewater Collection, Laboratory Testing & Regulatory Reporting
10.1 Wastewater Collection Systems & Lift Stations 10.2 Sampling & Laboratory Procedures (QA/QC) 10.3 Regulatory Compliance Reporting (eDMR / DWELR) & Emergency Response
11 Chapter 11: Drinking Water Regulations, Operator Science & Residuals
11.1 Chapter 109, Part 141 Rules & Public Water System Classification 11.2 Water & Wastewater Chemistry Fundamentals 11.3 Microbiology, Pathogens & Waterborne Disease 11.4 Treatment Plant Residuals & Filter Backwash Recycling
12 Chapter 12: Alternative Filtration Technologies (Subclasses 2 through 6)
12.1 Direct Filtration (Subclass 2) 12.2 Diatomaceous Earth Filtration (Subclass 3) 12.3 Slow Sand Filtration (Subclass 4) 12.4 Cartridge & Bag Filtration (Subclass 5) 12.5 Membrane Filtration Systems Operation (Subclass 6)
13 Chapter 13: Chemical Addition & Contaminant Removal (Subclasses 8 through 10)
13.1 Chemical Addition Systems & Feed Equipment (Subclass 8) 13.2 Ion Exchange & Inorganics Removal (Subclass 9) 13.3 Aeration, Air Stripping & Activated Carbon Adsorption (Subclass 10)
14 Chapter 14: Disinfection Technology Subclasses (11 through 14)
14.1 Gaseous Chlorine Feed Systems (Subclass 11) 14.2 Nongaseous Chemical Disinfection Systems (Subclass 12) 14.3 Ultraviolet Disinfection Systems (Subclass 13) 14.4 Ozone Generation & Contacting Systems (Subclass 14)
15 Chapter 15: Plant Support Systems: Electrical, Maintenance & Instrumentation
15.1 Electrical Fundamentals & Motor Control 15.2 Preventive & Corrective Maintenance Programs 15.3 Instrumentation, SCADA & Online Analyzer Calibration
16 Chapter 16: Wastewater Effluent Disinfection, Lagoon Control & Industrial Pretreatment
16.1 Wastewater Effluent Disinfection & Dechlorination 16.2 Lagoon Process Control, Sludge Surveys & Seasonal Discharge 16.3 Industrial Pretreatment Programs
7.2 Grit Removal Systems & Velocity Control
Key Takeaways Explain This Topic AI
Wastewater grit consists of dense, inorganic abrasive solids (sand, gravel, cinders, coffee grounds, eggshells, and metallic particles) characterized by a specific gravity of approximately 2.65, in stark contrast to putrescible organic sewage solids whose specific gravity ranges between 1.01 and 1.05.
In horizontal-flow velocity-controlled grit channels, wastewater velocity must be strictly regulated to 1.0 ft/s (tolerance envelope 0.7 to 1.4 ft/s); velocities > 1.25–1.4 ft/s scour 65-mesh inorganic grit into downstream clarifiers, while velocities < 0.7–0.8 ft/s cause putrescible organic matter to settle into the grit trough, causing rancid odors.
Velocity control in horizontal channels is achieved using specialized hydraulic control structures—principally proportional (Sutro) weirs where discharge is directly proportional to head, or downstream Parshall flumes paired with parabolic channel cross-sections.
Aerated grit chambers introduce compressed air along one side of a rectangular basin, inducing a transverse helical (spiral) roll pattern with a bottom sweep velocity of 1.0 to 1.5 ft/s that selectively drops heavy inorganic grit into a bottom collection hopper while keeping organic solids suspended.
Modern vortex (Pista) grit chambers employ mechanically rotated paddles in a cylindrical tank to establish a forced vortex gradient that drops grit into a central sump; the collected grit slurry is pumped to hydrocyclone separators and inclined screw/rake classifiers to dewater grit to < 10–15% volatile organics and > 75% dry solids prior to disposal.
Last updated: September 2026
7.2 Grit Removal Systems & Velocity Control
Note
Protecting the Core Infrastructure : Situated immediately downstream of coarse screening, grit removal systems target dense inorganic particles that slip through bar screens. Because wastewater grit is highly abrasive and non-biodegradable, allowing it to migrate into downstream treatment units causes catastrophic wear on mechanical pumps, erodes valve seats, scores centrifuge scrolls, plugs sludge piping, and consumes irreplaceable active volume in anaerobic digesters and aeration basins. Mastering grit chamber hydraulics and velocity control is a core requirement for Pennsylvania wastewater treatment plant operators.
Wastewater grit encompasses heavy mineral matter including sand, gravel, cinders, silt, bone chips, coffee grounds, seeds, and metallic filings. These materials enter collection systems through roadway runoff entering manhole covers, cracked sewer pipes subject to stormwater inflow, broken joints, industrial discharges, and household food preparation.
Grit Characteristics & Stokes' Law Settling Mechanics
To separate inorganic grit from organic fecal matter without using chemical coagulants, wastewater engineers exploit the substantial difference in specific gravity (SG) and settling velocity between the two classes of waterborne solids. +---------------------------------------------------------------------------------------------------+
- | Grit vs. Organic Sewage Solids Physical Properties |
- +---------------------------------------------------------------------------------------------------+
- | Characteristic | Wastewater Grit | Organic Sewage Solids / Biomass |
- +---------------------------------------------------------------------------------------------------+
- | Composition | Inorganic silica, gravel, cinders,| Fecal matter, cellular biomass, |
- | | bone fragments, coffee grounds | grease, food residues |
- | Specific Gravity (SG) | 2.60 to 2.70 (nominal 2.65) | 1.01 to 1.05 (nominal 1.02) |
- | Settling Classification | Type I: Discrete particle settling| Type II & III: Flocculent and |
- | | (unhindered, constant velocity) | zone settling |
- | Target Particle Size | 50 to 65 mesh (0.21 to 0.30 mm) | Colloidal to macro-flocs |
- | Settling Velocity (vs) | 0.05 to 0.10 ft/s (1.5 to 3.0 cm/s| 0.001 to 0.005 ft/s |
- | Volatile Organic Fraction | Low (< 10% to 15% volatile) | High (70% to 85% volatile) |
- +---------------------------------------------------------------------------------------------------+
- 1. Stokes' Law and Type I Settling
Grit settles as discrete particles (Type I sedimentation), meaning individual particles maintain their size, shape, and density as they fall through the liquid column, settling independently without coalescing or flocculating with adjacent particles. For laminar boundary conditions around small spherical particles, settling velocity ( v s v_s v s ) is described by Stokes' Law : v s = g ( ρ p − ρ ) d 2 18 μ v_s = \frac{g (\rho_p - \rho) d^2}{18 \mu} v s = 18 μ g ( ρ p − ρ ) d 2
Where:
v s v_s v s = particle settling velocity (m/s or ft/s)
g g g = acceleration due to gravity ( 9.81 m/s 2 9.81\text{ m/s}^2 9.81 m/s 2 or 32.2 ft/s 2 32.2\text{ ft/s}^2 32.2 ft/s 2 )
ρ p \rho_p ρ p = density of the grit particle (nominal 2 , 650 kg/m 3 2,650\text{ kg/m}^3 2 , 650 kg/m 3 for silica sand)
ρ \rho ρ = density of water ( 1 , 000 kg/m 3 1,000\text{ kg/m}^3 1 , 000 kg/m 3 at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C )
d d d = particle diameter (m or ft)
μ \mu μ = dynamic viscosity of water ( 1.002 × 10 − 3 Pa ⋅ s 1.002 \times 10^{-3}\text{ Pa}\cdot\text{s} 1.002 × 1 0 − 3 Pa ⋅ s at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C )
Because settling velocity is proportional to the square of particle diameter ( d 2 d^2 d 2 ) and the density differential ( ρ p − ρ ) (\rho_p - \rho) ( ρ p − ρ ) , silica sand ( SG = 2.65 \text{SG} = 2.65 SG = 2.65 ) settles through water at a rate 20 to 50 times faster than an organic floc particle ( SG = 1.02 \text{SG} = 1.02 SG = 1.02 ) of identical diameter. Conventional grit chambers are engineered to capture all particles ≥ 65 mesh \ge 65\text{ mesh} ≥ 65 mesh ( 0.21 mm 0.21\text{ mm} 0.21 mm diameter), with modern vortex systems capturing down to 100 mesh 100\text{ mesh} 100 mesh ( 0.15 mm 0.15\text{ mm} 0.15 mm ) or 140 mesh 140\text{ mesh} 140 mesh ( 0.106 mm 0.106\text{ mm} 0.106 mm ).
2. Operational Consequences of Grit System Failure
When grit removal systems fail or are bypassed, the heavy abrasive particles pass into downstream process units:
Centrifugal Pump Abrasion : High-velocity grit acts as a liquid sandpaper abrasive, eroding cast-iron pump impellers, scouring volute casings, and destroying tungsten-carbide mechanical seal faces within months.
Sludge Line Plugging : In horizontal sludge pipes, grit drops out during pump idle periods, forming immovable concrete-like plugs that cannot be dislodged without high-pressure water jetting or pipe disassembly.
Anaerobic Digester Siltation : Heavy grit settles into the bottom cone of primary anaerobic digesters. Because digester mixing systems cannot lift dense sand from the bottom floor, grit accumulates continuously, forming immovable mounds up to 10 to 15 feet high. This steals 20% to 40% of active digester volume, blankets bottom heating coils, and requires taking the digester offline for costly manual mining and vacuum extraction.
Horizontal-Flow Velocity-Controlled Grit Channels
The oldest and most hydrodynamically sensitive grit removal technology is the horizontal-flow grit channel .
1. The Critical 1.0 ft/s Velocity Rule
In a horizontal grit channel, raw wastewater flows through long, narrow rectangular or trapezoidal concrete troughs. The entire operational success of the system depends on maintaining a precise horizontal fluid velocity: Optimal Horizontal Velocity = 1.0 ft/s (0.30 m/s) \text{Optimal Horizontal Velocity} = 1.0 \text{ ft/s (0.30 m/s)} Optimal Horizontal Velocity = 1.0 ft/s (0.30 m/s) Allowable Operational Range = 0.7 to 1.4 ft/s \text{Allowable Operational Range} = 0.7 \text{ to } 1.4 \text{ ft/s} Allowable Operational Range = 0.7 to 1.4 ft/s
If Velocity Exceeds 1.25 to 1.4 ft/s : Hydraulic scouring forces overcome gravitational settling. Inorganic sand grains (65-mesh and finer) are swept horizontally out of the channel and carried forward into primary clarifiers.
If Velocity Drops Below 0.7 to 0.8 ft/s : Heavy organic fecal solids, food waste, and grease begin settling along with the grit. The captured material becomes a foul-smelling, putrescible muck containing > 30% to 50% volatile solids, releasing toxic hydrogen sulfide ( H 2 S H_2S H 2 S ) and causing extreme odor and disposal issues.
2. Hydraulic Detention Time and Channel Sizing
Detention Time : Typically 45 to 90 seconds at peak design flow.
Channel Length : Sized so that a particle entering at the surface at maximum water depth has sufficient time to settle to the bottom hopper before reaching the effluent weir: Length (ft) = Depth (ft) × Horizontal Velocity (ft/s) Settling Velocity v s (ft/s) \text{Length (ft)} = \frac{\text{Depth (ft)} \times \text{Horizontal Velocity (ft/s)}}{\text{Settling Velocity } v_s \text{ (ft/s)}} Length (ft) = Settling Velocity v s (ft/s) Depth (ft) × Horizontal Velocity (ft/s)
3. Velocity Control Devices: Proportional Weirs & Parshall Flumes
Because wastewater influent flow fluctuates continuously between nighttime base flows and afternoon peaks, an unthrottled rectangular channel cannot maintain a constant velocity of 1.0 ft/s. As flow drops, depth drops, cross-sectional area drops, and velocity drops into the putrescible settling zone. Engineers prevent this using specialized outlet control structures: +---------------------------------------------------------------------------------------------------+
- | Horizontal Grit Channel Velocity Control Mechanisms |
- +---------------------------------------------------------------------------------------------------+
- | Device | Channel Geometry | Operating Hydraulic Principle |
- +---------------------------------------------------------------------------------------------------+
- | Proportional (Sutro) Weir | Rectangular Channel | Curved weir sides restrict cross-section; |
- | | | discharge Q is directly proportional to head H|
- | | | (Q ∝ H), keeping Q/A = 1.0 ft/s constant. |
- | Parshall Flume | Parabolic Channel | Parabolic channel area matches the flume head-|
- | | | discharge curve (Q = C · H^1.55), maintaining |
- | | | 1.0 ft/s across all liquid elevations. |
- +---------------------------------------------------------------------------------------------------+
The Proportional (Sutro) Weir : The Sutro weir features curved lateral faces resembling an inverted bell. The weir width narrows progressively as water elevation rises. The discharge rate Q Q Q across a Sutro weir varies directly with the liquid head H H H : Q = K ⋅ H Q = K \cdot H Q = K ⋅ H In a rectangular channel of width W W W , cross-sectional area is A = W ⋅ H A = W \cdot H A = W ⋅ H . Velocity through the channel is: v = Q A = K ⋅ H W ⋅ H = K W = Constant = 1.0 ft/s v = \frac{Q}{A} = \frac{K \cdot H}{W \cdot H} = \frac{K}{W} = \text{Constant} = 1.0 \text{ ft/s} v = A Q = W ⋅ H K ⋅ H = W K = Constant = 1.0 ft/s Thus, as water depth rises or falls with diurnal flow swings, velocity in the channel remains locked at exactly 1.0 ft/s.
Parshall Flume with Parabolic Channel : By pairing a downstream open-channel Parshall flume with a parabolic-shaped grit channel, the increasing water surface area precisely matches the flume's exponential discharge rating curve, maintaining constant velocity across wide flow swings.
Aerated Grit Chambers
An aerated grit chamber eliminates the delicate hydraulic velocity controls of horizontal channels by utilizing compressed air to establish an active, controlled spiral flow pattern. +---------------------------------------------------------------------------------------------------+
- | Aerated Grit Chamber Spiral Roll Dynamics |
- +---------------------------------------------------------------------------------------------------+
- | Wastewater Surface |
- | +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ |
- | | <<<<<<<<<<<< Surface Flow (0.5 - 1.0 ft/s) <<<<<<<<< | |
- | | ^ v | |
- | | Rising Air Downward| |
- | | Bubbles Water | |
- | | ^ v | |
- | | ^ v | |
- | | +-- Diffusers >>>>> Bottom Sweep (1.0 - 1.5 ft/s) >>>>>+ | |
- | +------------------------------------------------------------\----+ |
- | Grit \ |
- | Hopper \ |
- | Trough + |
- +---------------------------------------------------------------------------------------------------+
- 1. Tank Configuration & Helical Roll Hydraulics
An aerated grit chamber is a rectangular concrete tank with a length-to-width ratio of 2.5:1 to 5:1 and a liquid depth of 8 to 15 feet. Coarse-bubble air diffusers are submerged along one longitudinal sidewall, positioned approximately 2 to 3 feet above the floor.
The Helical (Spiral) Roll Pattern : As compressed air discharges from the diffusers, the rising air-water column creates a strong upward draft along the diffuser wall. Water flows across the surface to the opposite wall, moves downward, and sweeps horizontally across the tank invert back toward the diffusers. Combined with the forward longitudinal flow of wastewater through the tank, the fluid travels in a continuous corkscrew or helical path .
Differential Settling in the Spiral : The bottom sweeping velocity is hydrodynamically adjusted to 1.0 to 1.5 ft/s :
Heavy inorganic grit particles have a high settling velocity. When swept across the bottom invert, their inertia and gravity cause them to drop out of the helical stream and fall through a slotted baffle into a quiescent bottom grit collection hopper .
Lighter organic solids, having a specific gravity close to water ( SG ≈ 1.02 \text{SG} \approx 1.02 SG ≈ 1.02 ), remain suspended in the swirling liquid core and are carried forward into primary clarification.
2. Operational Airflow Adjustments
Proper operation of an aerated grit chamber requires active operator tuning of the air supply rate:
Standard Air Supply Rate : Typically 2.0 to 5.0 standard cubic feet per minute per foot of tank length (scfm/ft) (or 0.18 to 0.46 m 3 / min ⋅ m \text{m}^3/\text{min}\cdot\text{m} m 3 / min ⋅ m ).
Detention Time : Typically 2 to 5 minutes at peak flow (3 to 8 minutes at average flow).
Troubleshooting Airflow Settings :
Too Much Air (Excessive Roll Velocity) : If airflow is excessive, bottom sweeping velocity exceeds 1.5 to 2.0 ft/s. The violent hydraulic turbulence sweeps dense grit particles out of the hopper and carries them over into primary clarifiers. Action : Throttling back air blower discharge or closing diffuser drop valves.
Too Little Air (Insufficient Roll Velocity) : If airflow is too low, bottom velocity drops below 1.0 ft/s. Putrescible organic solids and fecal matter settle into the grit hopper alongside the sand. The collected grit turns coal-black, emits rotten-egg ( H 2 S H_2S H 2 S ) odors, and contains > 20% volatile solids. Action : Increase air supply rate until the spiral roll briskly scours organic matter off the bottom invert.
Secondary Operational Benefits : Continuous pre-aeration freshens stale or septic sewage, strips entrained hydrogen sulfide gas, drives off volatile organic compounds, and initiates separation of floatable grease before primary clarifiers.
Vortex & Induced Swirl Grit Removal (Pista Chambers)
Modern wastewater treatment facilities predominantly install mechanically induced vortex grit removal systems (such as Pista® grit chambers or tangential teacup separators) due to their exceptionally compact physical footprint, high removal efficiency, and low head loss.
1. Vortex Hydrodynamics & Boundary Layer Separation
A vortex grit chamber consists of a shallow cylindrical concrete or steel basin featuring a flat upper floor, a sloped lower cone, and a central grit collection sump:
Tangential Influent Entry : Raw wastewater enters the cylindrical chamber tangentially along the outer perimeter, establishing a natural circular vortex.
Rotating Impeller Assembly : An electric drive motor rotates an axial shaft equipped with angled mechanical paddles. The paddles rotate in the direction of the vortex, maintaining a constant tangential fluid velocity regardless of whether plant influent is at minimum night flow or maximum storm peak.
Boundary Layer & Centrifugal Mechanics : The rotating fluid creates a forced vortex gradient. High centrifugal forces push liquid outwards, but along the stationary chamber floor, fluid boundary friction reduces tangential velocity. This generates a secondary radial inward boundary-layer sweep .
Grit vs. Organics Separation : Heavy grit particles migrating along the floor are swept inward and fall over the lip of the center cone into the quiet collection sump. Meanwhile, lighter organic solids are carried upward in an axial liquid column and discharge over a 360° peripheral weir trough.
2. Operating Merits
High Efficiency : Reliably removes 95% of all grit ≥ 50 mesh \ge 50\text{ mesh} ≥ 50 mesh ( 0.30 mm 0.30\text{ mm} 0.30 mm ) and over 75% to 85% of fine 100 mesh 100\text{ mesh} 100 mesh ( 0.15 mm 0.15\text{ mm} 0.15 mm ) particles.
Compact Footprint : Requires less than one-third the concrete volume and surface land area of a comparable aerated grit chamber.
Minimal Hydraulic Head Loss : Total head loss through a vortex chamber is exceptionally low—typically less than 0.25 to 0.50 feet (3 to 6 inches) —allowing gravity flow through the headworks without auxiliary re-pumping.
Grit Slurry Pumping, Hydrocyclone Separation & Mechanical Classification
Captured grit must be continuously extracted from collection hoppers, washed to strip residual fecal organics, and dewatered before transport to a landfill.
1. Grit Slurry Pumping Systems
Because grit is intensely abrasive, standard centrifugal pumps with tight tolerances will fail rapidly. Grit slurry (typically containing 1% to 3% solids by weight in water) is elevated from the chamber sump using specialized equipment:
Air-Lift Pumps : Use injected compressed air at the bottom of a vertical pipe to reduce fluid density, lifting the grit-water slurry without moving mechanical parts.
Torque-Flow / Recessed-Impeller Centrifugal Pumps : The pump impeller is recessed entirely out of the main casing flow path. Pumping action is induced by a liquid vortex created by the spinning impeller. Abrasive grit particles pass through the casing without striking the impeller vanes, minimizing abrasive wear.
2. Hydrocyclone Separators
The pumped grit slurry discharges under pressure ( 15 to 25 psi ) tangentially into the upper cylindrical section of a hydrocyclone (cyclone separator) :
Centrifugal Acceleration : Slurry spirals downward into a narrowing conical body, generating centrifugal accelerations several hundred times the force of gravity.
Apex Discharge (Underflow) : High-density inorganic grit particles are slung outward against the polyurethane cone wall and spiral down to discharge through a small bottom nozzle ( apex orifice ) as a concentrated grit slurry (typically 10% to 20% solids).
Vortex Finder (Overflow) : Lower-density water, fine suspended organics, and grease are drawn into an upward-moving low-pressure central vortex core, exiting through the top overflow pipe and returning to the plant headworks or primary clarifier influent.
3. Grit Classifiers (Screw and Rake Dewaterers)
The concentrated underflow from the hydrocyclone drops directly into an inclined mechanical grit classifier :
Inclined Screw Classifier : Consists of an inclined metal tub ( 15 ∘ to 25 ∘ 15^\circ\text{ to }25^\circ 1 5 ∘ to 2 5 ∘ angle from horizontal) housing a slowly rotating Archimedean screw. Slurry enters the lower pool. Heavy grit settles immediately to the tub floor. The rotating screw slowly drags the grit up the inclined ramp.
Gravity Dewatering Zone : As grit is pulled above the pool water surface, excess free water drains by gravity down the inclined trough back into the pool. Spray nozzles provide a final rinse of clean plant water to dislodge residual organic slime.
Dewatered Grit Metrics : The screw discharges clean, dewatered grit cake into an outdoor roll-off container. High-performance classification produces grit containing > 75 % to 85 % > 75\%\text{ to }85\% > 75% to 85% total dry solids and < 10 % to 15 % < 10\%\text{ to }15\% < 10% to 15% volatile organic matter , satisfying state regulatory requirements for sanitary landfill co-disposal.