Study guide

14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

PE Chemical Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the PE Chemical Exam How to Use This Guide and the NCEES Handbook

2 Chapter 1: Material Balances & Flowsheet Calculations

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting 1.2 Steady-State Material Balances (Reactive & Non-Reactive Systems) 1.3 Recycle, Bypass, and Purge Operations

3 Chapter 2: Energy Balances & Thermochemistry

2.1 Enthalpy Accounting, Sensible Heat, and Phase Changes 2.2 Heats of Reaction, Formation, and Adiabatic Flame Temperatures 2.3 Unsteady-State Mass and Energy Balances

4 Chapter 3: Fluid Statics & Incompressible Pipe Flow

3.1 Fluid Statics, Pressure Measurement, and Manometry 3.2 Incompressible Flow, Friction Factors, and the Moody Diagram 3.3 Minor Losses, Equivalent Length, and Piping Networks 3.4 Pumps, Compressors, and NPSH Calculations

5 Chapter 4: Advanced Fluid Dynamics & Compressible Flow

4.1 Compressible Gas Flow, Sonic Velocity, and Choked Flow 4.2 Flow Measurement Devices (Orifices, Venturis, Rotameters) 4.3 Multiphase Flow and Fluidization Principles 4.4 Mixing, Agitation, and Agitator Scale-Up

6 Chapter 5: Thermodynamic Laws & Fundamental Relations

5.1 First and Second Laws, Heat Engines, and Carnot Efficiency 5.2 Entropy, Availability, and Exergy Analysis 5.3 Fundamental Property Relations and Maxwell Equations

7 Chapter 6: Real Gases & Equations of State

6.1 Volumetric Properties and Compressibility Factor Charts 6.2 Cubic Equations of State (vdW, RK, SRK, and Peng-Robinson) 6.3 Residual Properties and Enthalpy/Entropy Departure Functions

8 Chapter 7: Phase & Chemical Reaction Equilibria

7.1 Pure Component Vapor Pressure and Phase Equilibria 7.2 Vapor-Liquid Equilibrium (VLE), Raoult's Law, and Activity Coefficients 7.3 Chemical Reaction Equilibria and Equilibrium Constant Calculation

9 Chapter 8: Heat Transfer Mechanisms & Conduction

8.1 Steady-State Conduction in Planar, Cylindrical, and Spherical Geometries 8.2 Convective Heat Transfer and Dimensionless Correlations 8.3 Thermal Radiation, Emissivity, and Surface Radiation Exchange

10 Chapter 9: Heat Exchanger Design & Phase Change

9.1 Shell-and-Tube Exchanger Design, TEMA Standards, and LMTD 9.2 Effectiveness-NTU Method and Exchanger Rating 9.3 Boiling Regimes, Condensation Phenomena, and Fouling Resistances

11 Chapter 10: Mass Transfer Fundamentals & Diffusion

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion 10.2 Convective Mass Transfer and Film Theories 10.3 Mass Transfer Dimensionless Numbers (Sherwood, Schmidt, Peclet)

12 Chapter 11: Distillation Operations

11.1 Vapor-Liquid Equilibrium and Relative Volatility in Distillation 11.2 McCabe-Thiele Method for Binary Distillation 11.3 Packed vs Tray Columns, Flooding, and Tray Hydraulics 11.4 Multicomponent Distillation Fundamentals and Key Components

13 Chapter 12: Rate-Controlled & Equilibrium Separations

12.1 Gas Absorption, Stripping, and the Kremser Equation 12.2 Liquid-Liquid Extraction and Ternary Phase Equilibria 12.3 Adsorption, Membrane Separations, and Drying Operations 12.4 Filtration, Crystallization, and Solid-Fluid Separations

14 Chapter 13: Chemical Kinetics & Ideal Isothermal Reactors

13.1 Reaction Rates, Rate Laws, and Order of Reaction 13.2 Temperature Dependence and the Arrhenius Equation 13.3 Batch Reactors and Continuous Stirred-Tank Reactors (CSTR) 13.4 Plug Flow Reactors (PFR) and Reactor Combinations

15 Chapter 14: Non-Ideal Flow, Non-Isothermal Reactors & Catalysis

14.1 Yield, Selectivity, and Multiple Reactions (Series and Parallel) 14.2 Non-Isothermal Reactor Design and Thermal Runaway 14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

16 Chapter 15: Physical & Transport Properties of Fluids

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations 15.2 Thermal Conductivity and Specific Heat Capacities 15.3 Estimation Methods and Corresponding States Principles

17 Chapter 16: Materials of Construction & Corrosion

16.1 Mechanical Properties and Materials Selection in Chemical Plants 16.2 Corrosion Mechanisms, Materials Degradation, and Prevention

18 Chapter 17: Process Safety & Pressure Relief Systems

17.1 Hazard Identification Methodologies (HAZOP, FMEA, What-If) 17.2 Pressure Relief Valve (PRV) and Rupture Disk Sizing 17.3 Flammability, Explosions, and Toxic Dispersion Limits 17.4 Inerting, Purging, Discharge Location, and Containment

19 Chapter 18: Process Control & Engineering Economics

18.1 Process Dynamics and Feedback Control Loops 18.2 PID Controller Tuning and Loop Stability 18.3 Chemical Plant Capital Cost Estimation and Profitability Analysis 18.4 Field Instrumentation, Control Valves, Alarms, and Safety Instrumented Systems

20 Chapter 19: Process Design, Equipment Selection & Environmental Compliance

19.1 Process Flow Diagrams, P&IDs, Scale-Up, and Plant Siting 19.2 Process Equipment Selection, Sizing, and Optimization 19.3 Emissions Evaluation, Mitigation, and Remediation

21 Chapter 20: Plant Operation, Reliability & Continuous Improvement

20.1 Operating Procedures, Startup, and Shutdown 20.2 Mechanical Integrity, Reliability, and Failure Mechanisms 20.3 Debottlenecking, Optimization, and Troubleshooting

14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

Key Takeaways Explain This Topic AI

Heterogeneous solid-catalyzed reactions proceed through a sequential seven-step pathway (external film diffusion -> pore diffusion -> adsorption -> surface reaction -> desorption -> product pore diffusion -> external film diffusion); the slowest step in series governs the overall rate law.

The internal effectiveness factor eta quantifies intraparticle pore diffusion resistance: when the Thiele modulus is small (phi < 0.4), pore diffusion is rapid (eta approx 1.0, reaction-rate controlled); when the Thiele modulus is large (phi > 3), reaction occurs only within a thin outer shell of the catalyst pellet (eta approx 1/phi for plates, eta approx 3/phi for spheres).

Under severe internal pore diffusion resistance (phi > 3), observed kinetics are disguised: the apparent activation energy drops to exactly half of the true catalytic barrier (E_app = E_true / 2) and the apparent reaction order shifts toward n_app = (n_true + 1) / 2.

The Mears criterion (C_M = (-r_A' * rho_b * R * n) / (k_c * C_Ab) < 0.15) and Weisz-Prater criterion (Phi_WP = (-r_A'_obs * rho_c * R^2) / (D_eff * C_As) < 0.3) provide rigorous diagnostic tests using observable laboratory data to rule out external film and internal pore diffusion limitations, respectively.

Non-ideal continuous flow reactors are diagnosed from pulse tracer Residence Time Distributions (RTD) yielding mean residence time t_m = tau and variance sigma^2; non-ideality is modeled analytically using the Tanks-in-Series model (N = tau^2 / sigma^2) or the Axial Dispersion model characterized by the Peclet number (Pe_r = u * L / D_ax approx 2 * N).

Last updated: September 2026

14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

In industrial practice, over 80 % 80\% 80% of manufactured chemical products involve solid heterogeneous catalysts —from petroleum fluid catalytic cracking (FCC) and reforming to ammonia synthesis, steam-methane reforming, and automotive emissions control. Heterogeneous catalysts provide active surface sites that alter reaction pathways and dramatically lower activation energies.

However, catalytic reactions are intrinsically coupled with physical transport phenomena (external fluid-film mass transfer and internal pore diffusion). Furthermore, commercial reactors (such as packed beds, fluidized beds, and bubble columns) exhibit non-ideal flow patterns involving velocity maldistribution, backmixing, and stagnant zones. On the NCEES PE Chemical Exam , candidates must analyze catalytic reaction mechanisms, quantify diffusion limitations using the Thiele modulus and effectiveness factor , apply diagnostic criteria ( Mears and Weisz-Prater ), and model Residence Time Distributions (RTD) using Tanks-in-Series and Axial Dispersion models.

1. The Seven-Step Catalytic Sequence & Surface Kinetics

For a heterogeneous catalytic reaction A ( g ) → B ( g ) A(g) \to B(g) A ( g ) → B ( g ) occurring on a porous solid catalyst pellet, molecules must traverse seven distinct physical and chemical steps in series: SEVEN-STEP CATALYTIC SEQUENCE

  • Bulk Fluid Stream (C_Ab)
  • |
  • (1) | External Mass Transfer (Film Diffusion through boundary layer)
  • v
  • Pellet External Surface (C_As)
  • |
  • (2) | Internal Pore Diffusion (Knudsen / Bulk diffusion into pores)
  • v
  • Internal Active Catalytic Site
  • |
  • (3) | Chemisorption of Reactant A onto Active Site: A + S <-> A*S
  • v
  • (4) | Surface Reaction: A*S <-> B*S (or A*S + B*S <-> C*S + S)
  • v
  • (5) | Desorption of Product B from Active Site: B*S <-> B + S
  • v
  • Internal Pore Fluid
  • |
  • (6) | Internal Pore Diffusion of Product B outward through pores
  • v
  • Pellet External Surface
  • |
  • (7) | External Mass Transfer of Product B across boundary layer into bulk
  • v
  • Bulk Fluid Stream

Because these steps occur in series, the slowest step acts as the rate-limiting step (RLS) , dictating the global rate expression.

Langmuir-Hinshelwood vs. Eley-Rideal Mechanisms

When physical transport resistances (steps 1, 2, 6, and 7) are negligible, surface phenomena (steps 3, 4, or 5) govern the kinetics:

Langmuir-Hinshelwood (LH) Mechanism: Reaction occurs between species that are both adsorbed onto adjacent active surface sites: A ( g ) + S ⇌ A ⋅ S , B ( g ) + S ⇌ B ⋅ S A(g) + S \rightleftharpoons A \cdot S, \quad B(g) + S \rightleftharpoons B \cdot S A ( g ) + S ⇌ A ⋅ S , B ( g ) + S ⇌ B ⋅ S A ⋅ S + B ⋅ S → k C ⋅ S + S A \cdot S + B \cdot S \xrightarrow{k} C \cdot S + S A ⋅ S + B ⋅ S k ​ C ⋅ S + S

Assuming surface reaction is rate-limiting, the rate law exhibits the classic dual-site form: r = k K A K B P A P B ( 1 + K A P A + K B P B + K C P C ) 2 r = \frac{k K_A K_B P_A P_B}{(1 + K_A P_A + K_B P_B + K_C P_C)^2} r = ( 1 + K A ​ P A ​ + K B ​ P B ​ + K C ​ P C ​ ) 2 k K A ​ K B ​ P A ​ P B ​ ​

Notice the squared denominator , reflecting the requirement for two adjacent vacant sites.

Eley-Rideal (ER) Mechanism: Reaction occurs between an adsorbed species and an unadsorbed gas-phase molecule directly colliding from the fluid phase: A ( g ) + S ⇌ A ⋅ S A(g) + S \rightleftharpoons A \cdot S A ( g ) + S ⇌ A ⋅ S A ⋅ S + B ( g ) → k C ⋅ S A \cdot S + B(g) \xrightarrow{k} C \cdot S A ⋅ S + B ( g ) k ​ C ⋅ S

Assuming surface reaction is rate-limiting: r = k K A P A P B 1 + K A P A + K C P C r = \frac{k K_A P_A P_B}{1 + K_A P_A + K_C P_C} r = 1 + K A ​ P A ​ + K C ​ P C ​ k K A ​ P A ​ P B ​ ​

Here, the denominator has an exponent of 1 because only one surface site participates.

Catalyst Deactivation Mechanisms

Industrial catalysts experience loss of catalytic activity ( a ( t ) = − r A ′ ( t ) / − r A ′ ( t = 0 ) a(t) = -r_A'(t) / -r_A'(t=0) a ( t ) = − r A ′ ​ ( t ) / − r A ′ ​ ( t = 0 ) ) over operating time via three primary mechanisms:

Coking (Fouling): Carbonaceous deposits coat active sites and plug pore mouths during hydrocarbon processing. Coking is often reversible ; catalyst activity is restored by periodically burning off coke deposits with dilute air or steam at elevated temperatures.

Poisoning: Irreversible chemisorption of chemical impurities (e.g., sulfur compounds poisoning noble metal catalysts, lead poisoning platinum converters, or chlorides in reforming). Poisoning is irreversible ; prevention requires rigorous feed hydrotreating and guard beds.

Sintering (Aging): Thermally driven migration and coalescence of minute catalytic crystallites into larger agglomerates, causing severe loss of active surface area and pore structural collapse. Sintering is accelerated by high temperatures and water vapor, and is strictly irreversible .

2. Internal Pore Diffusion: Thiele Modulus & Effectiveness Factor

When reactants diffuse into porous pellets, concentration decreases from the external pellet surface ( C A s C_{As} C A s ​ ) toward the pellet center due to ongoing reaction. The dimensionless Thiele modulus ( ϕ \phi ϕ ) characterizes the relative ratio of intrinsic reaction rate to intraparticle diffusion rate.

Definition of the Thiele Modulus

For an n n n -th order reaction in a porous pellet with effective diffusivity D e f f D_{eff} D e ff ​ : ϕ n = R k v C A s n − 1 D e f f = R k ρ c C A s n − 1 D e f f \phi_n = R \sqrt{\frac{k_v C_{As}^{n-1}}{D_{eff}}} = R \sqrt{\frac{k \rho_c C_{As}^{n-1}}{D_{eff}}} ϕ n ​ = R D e ff ​ k v ​ C A s n − 1 ​ ​ ​ = R D e ff ​ k ρ c ​ C A s n − 1 ​ ​ ​

Where:

R R R = characteristic pellet dimension (radius for spheres and cylinders; half-thickness for flat plates).

k v k_v k v ​ = volumetric rate constant ( s − 1 \text{s}^{-1} s − 1 for first order).

ρ c \rho_c ρ c ​ = catalyst pellet density ( kg/m 3 \text{kg/m}^3 kg/m 3 solid).

D e f f D_{eff} D e ff ​ = effective internal pore diffusivity ( m 2 / s \text{m}^2/\text{s} m 2 / s ), accounting for pellet porosity ( ϵ \epsilon ϵ ) and tortuosity ( τ p \tau_p τ p ​ ): D e f f = ϵ τ p D A B D_{eff} = \frac{\epsilon}{\tau_p} D_{AB} D e ff ​ = τ p ​ ϵ ​ D A B ​ .

To normalize across diverse pellet shapes (spheres, hollow cylinders, trilobes), Aris defined the generalized Thiele modulus ( Φ \Phi Φ ): Φ ≡ V p S p k v C A s n − 1 D e f f \Phi \equiv \frac{V_p}{S_p} \sqrt{\frac{k_v C_{As}^{n-1}}{D_{eff}}} Φ ≡ S p ​ V p ​ ​ D e ff ​ k v ​ C A s n − 1 ​ ​ ​

Where V p / S p V_p / S_p V p ​ / S p ​ is the pellet volume-to-surface-area ratio ( R / 3 R/3 R /3 for spheres, R / 2 R/2 R /2 for long cylinders, L L L for flat plates).

The Internal Effectiveness Factor ( η \eta η )

The internal effectiveness factor ( η \eta η ) is the ratio of the actual observed reaction rate throughout the pellet to the ideal rate that would occur if the entire pellet interior were exposed to external surface conditions ( C A s , T s C_{As}, T_s C A s ​ , T s ​ ): η = Actual Global Reaction Rate in Pellet Reaction Rate Evaluated at External Surface Conditions ( C A s ) \eta = \frac{\text{Actual Global Reaction Rate in Pellet}}{\text{Reaction Rate Evaluated at External Surface Conditions } (C_{As})} η = Reaction Rate Evaluated at External Surface Conditions ( C A s ​ ) Actual Global Reaction Rate in Pellet ​

Analytical solutions for first-order isothermal reactions:

Flat Plate of Half-Thickness L L L : η = tanh ⁡ ( ϕ p ) ϕ p \eta = \frac{\tanh(\phi_p)}{\phi_p} η = ϕ p ​ tanh ( ϕ p ​ ) ​

Spherical Pellet of Radius R R R : η = 3 ϕ s [ 1 tanh ⁡ ( ϕ s ) − 1 ϕ s ] \eta = \frac{3}{\phi_s} \left[ \frac{1}{\tanh(\phi_s)} - \frac{1}{\phi_s} \right] η = ϕ s ​ 3 ​ [ tanh ( ϕ s ​ ) 1 ​ − ϕ s ​ 1 ​ ] Effectiveness Factor (eta) vs. Thiele Modulus (phi)

  • eta
  • 1.0|---------\
  • | \ Reaction-Controlled (phi < 0.4, eta -> 1.0)
  • | \
  • | \
  • | \ Strong Pore Diffusion Control (phi > 3)
  • | \ Asymptote: eta -> 1/phi (or 3/phi)
  • | \
  • 0.0+----------------------------------------------------> phi
  • 0.1 1.0 10.0
  • Kinetic Regimes & Disguised Kinetics

Reaction-Controlled Regime ( ϕ < 0.4 \phi < 0.4 ϕ < 0.4 ):

Pore diffusion is much faster than reaction. The reactant penetrates completely to the pellet core ( C A ( r ) ≈ C A s C_A(r) \approx C_{As} C A ​ ( r ) ≈ C A s ​ ). The effectiveness factor is η ≈ 1.0 \eta \approx 1.0 η ≈ 1.0 . The observed reaction rate equals the true intrinsic chemical rate.

Strong Pore Diffusion Resistance ( ϕ > 3.0 \phi > 3.0 ϕ > 3.0 or Φ > 1.0 \Phi > 1.0 Φ > 1.0 ):

The chemical reaction is so fast relative to diffusion that reactants are consumed immediately upon entering the pore mouths. The pellet center is starved of reactant ( C A → 0 C_A \to 0 C A ​ → 0 ), leaving the catalyst core useless. Under this regime: η ≈ 1 Φ = 3 ϕ s \eta \approx \frac{1}{\Phi} = \frac{3}{\phi_s} η ≈ Φ 1 ​ = ϕ s ​ 3 ​

Important

Disguised Kinetics under Strong Pore Diffusion ( ϕ > 3 \phi > 3 ϕ > 3 ):

When strong pore diffusion limits the reaction, the observed global rate behaves as: − r A ( o b s ) = η ⋅ k v C A s n ≈ ( 1 V p S p k v C A s n − 1 D e f f ) k v C A s n = S p V p D e f f k v ⋅ C A s n + 1 2 -r_A(obs) = \eta \cdot k_v C_{As}^n \approx \left( \frac{1}{\frac{V_p}{S_p} \sqrt{\frac{k_v C_{As}^{n-1}}{D_{eff}}}} \right) k_v C_{As}^n = \frac{S_p}{V_p} \sqrt{D_{eff} k_v} \cdot C_{As}^{\frac{n+1}{2}} − r A ​ ( o b s ) = η ⋅ k v ​ C A s n ​ ≈ ​ S p ​ V p ​ ​ D e ff ​ k v ​ C A s n − 1 ​ ​ ​ 1 ​ ​ k v ​ C A s n ​ = V p ​ S p ​ ​ D e ff ​ k v ​ ​ ⋅ C A s 2 n + 1 ​ ​ This introduces two classic PE exam traps :

Apparent Reaction Order: The observed order shifts from true order n n n to n a p p = n + 1 2 n_{app} = \frac{n + 1}{2} n a pp ​ = 2 n + 1 ​ . A true second-order reaction ( n = 2 n = 2 n = 2 ) appears as order 1.5 1.5 1.5 in the laboratory!

Apparent Activation Energy: Because rate scales with k v \sqrt{k_v} k v ​ ​ , the observed activation energy drops to exactly half of the true chemical activation energy: E a p p = E t r u e 2 E_{app} = \frac{E_{true}}{2} E a pp ​ = 2 E t r u e ​ ​ (since D e f f D_{eff} D e ff ​ has negligible temperature dependence compared to Arrhenius kinetics).

3. Diagnostic Criteria: Weisz-Prater and Mears Tests

In industrial practice and laboratory testing, the true intrinsic rate constant k v k_v k v ​ and surface concentration C A s C_{As} C A s ​ are unknown upfront because measurements only capture bulk concentrations ( C A b C_{Ab} C A b ​ ) and observed global rates ( − r A ′ ( o b s ) -r_A'(obs) − r A ′ ​ ( o b s ) ). To diagnose transport limitations without knowing intrinsic kinetics, chemical engineers use diagnostic criteria.

Weisz-Prater Criterion for Internal Pore Diffusion

The Weisz-Prater parameter ( Φ W P \Phi_{WP} Φ W P ​ ) evaluates internal diffusion limitations using only observable experimental quantities: Φ W P = η ⋅ ϕ 2 = − r A ′ ( o b s ) ⋅ ρ c ⋅ R 2 D e f f ⋅ C A s = − r A ( o b s ) ⋅ R 2 D e f f ⋅ C A s \Phi_{WP} = \eta \cdot \phi^2 = \frac{-r_A'(obs) \cdot \rho_c \cdot R^2}{D_{eff} \cdot C_{As}} = \frac{-r_A(obs) \cdot R^2}{D_{eff} \cdot C_{As}} Φ W P ​ = η ⋅ ϕ 2 = D e ff ​ ⋅ C A s ​ − r A ′ ​ ( o b s ) ⋅ ρ c ​ ⋅ R 2 ​ = D e ff ​ ⋅ C A s ​ − r A ​ ( o b s ) ⋅ R 2 ​

Where:

− r A ′ ( o b s ) -r_A'(obs) − r A ′ ​ ( o b s ) = observed reaction rate per unit catalyst mass ( mol/(kg cat ⋅ s) \text{mol/(kg cat}\cdot\text{s)} mol/(kg cat ⋅ s) ).

− r A ( o b s ) -r_A(obs) − r A ​ ( o b s ) = observed reaction rate per unit catalyst volume ( mol/(m 3 pellet ⋅ s) \text{mol/(m}^3\text{ pellet}\cdot\text{s)} mol/(m 3 pellet ⋅ s) ).

ρ c \rho_c ρ c ​ = catalyst pellet density ( kg cat/m 3 \text{kg cat/m}^3 kg cat/m 3 pellet).

R R R = pellet radius ( m \text{m} m ).

C A s C_{As} C A s ​ = reactant concentration at outer pellet surface ( mol/m 3 \text{mol/m}^3 mol/m 3 ).

Decision Thresholds:

Φ W P ≪ 1.0 \Phi_{WP} \ll 1.0 Φ W P ​ ≪ 1.0 (typically < 0.3 < 0.3 < 0.3 ): Internal pore diffusion resistance is negligible. The reaction operates in the reaction-controlled regime ( η ≈ 1.0 \eta \approx 1.0 η ≈ 1.0 ).

Φ W P ≫ 1.0 \Phi_{WP} \gg 1.0 Φ W P ​ ≫ 1.0 (typically > 1.0 > 1.0 > 1.0 to 3.0 3.0 3.0 ): Severe pore diffusion resistance exists. The catalyst center is starved of reactant ( η ≪ 1.0 \eta \ll 1.0 η ≪ 1.0 ). Remedy: synthesize smaller catalyst pellets or widen pore diameter.

Mears Criterion for External Film Mass Transfer

The Mears criterion ( C M C_M C M ​ ) evaluates whether mass transfer across the hydrodynamic boundary layer surrounding the pellet exterior limits the reaction rate: C M = − r A ′ ( o b s ) ⋅ ρ b ⋅ R ⋅ n k c ⋅ C A b < 0.15 C_M = \frac{-r_A'(obs) \cdot \rho_b \cdot R \cdot n}{k_c \cdot C_{Ab}} < 0.15 C M ​ = k c ​ ⋅ C A b ​ − r A ′ ​ ( o b s ) ⋅ ρ b ​ ⋅ R ⋅ n ​ < 0.15

Where:

ρ b \rho_b ρ b ​ = packed bed bulk density ( kg cat/m 3 \text{kg cat/m}^3 kg cat/m 3 reactor bed).

n n n = reaction order.

k c k_c k c ​ = external fluid-film mass transfer coefficient ( m/s \text{m/s} m/s ).

C A b C_{Ab} C A b ​ = bulk fluid reactant concentration ( mol/m 3 \text{mol/m}^3 mol/m 3 ).

Decision Threshold:

If C M < 0.15 C_M < 0.15 C M ​ < 0.15 , external film diffusion resistance is negligible ( C A s ≈ C A b C_{As} \approx C_{Ab} C A s ​ ≈ C A b ​ ). Fluid-to-particle mass transfer accounts for less than 5 % 5\% 5% of the overall concentration driving force.

If C M > 0.15 C_M > 0.15 C M ​ > 0.15 , external film resistance limits the rate. Remedy: increase superficial fluid velocity ( u u u ) or bed turbulence to thin the boundary layer and boost k c k_c k c ​ .

4. Residence Time Distribution (RTD) Fundamentals

Real chemical reactors deviate from ideal PFR and CSTR assumptions due to velocity profiles (laminar parabolic flow), channeling, bypassing, recirculating eddies, and stagnant dead zones . The Residence Time Distribution (RTD) characterizes the statistical distribution of time that fluid elements spend inside the reactor vessel. PULSE TRACER EXPERIMENT

  • Tracer Spike N_0 Reactor Vessel Detector Record C(t)
  • at time t = 0 Volume V Concentration
  • | | ^
  • v v |
  • ======|====================[ REACTOR ]========================|====>
  • Flow Rate v_0 +-----
  • t
  • The Pulse Tracer Experiment & E ( t ) E(t) E ( t ) Curve

An inert tracer (dye, radioactive isotope, or salt) of amount N 0 N_0 N 0 ​ is injected as an instantaneous Dirac delta pulse into the entering stream at t = 0 t = 0 t = 0 . The exit concentration C ( t ) C(t) C ( t ) is measured continuously.

Area Under the Tracer Curve: Area = ∫ 0 ∞ C ( t ) d t = N 0 v 0 \text{Area} = \int_0^\infty C(t) \, dt = \frac{N_0}{v_0} Area = ∫ 0 ∞ ​ C ( t ) d t = v 0 ​ N 0 ​ ​

Exit Age Distribution Function, E ( t ) E(t) E ( t ) : The RTD function E ( t ) E(t) E ( t ) is normalized so that its integral equals unity: E ( t ) = C ( t ) ∫ 0 ∞ C ( t ) d t = C ( t ) Area E(t) = \frac{C(t)}{\int_0^\infty C(t) \, dt} = \frac{C(t)}{\text{Area}} E ( t ) = ∫ 0 ∞ ​ C ( t ) d t C ( t ) ​ = Area C ( t ) ​ ∫ 0 ∞ E ( t ) d t = 1.0 \int_0^\infty E(t) \, dt = 1.0 ∫ 0 ∞ ​ E ( t ) d t = 1.0

The fraction of fluid in the exit stream that has resided in the reactor for a duration between t 1 t_1 t 1 ​ and t 2 t_2 t 2 ​ is ∫ t 1 t 2 E ( t ) d t \int_{t_1}^{t_2} E(t) \, dt ∫ t 1 ​ t 2 ​ ​ E ( t ) d t .

Cumulative Distribution Function, F ( t ) F(t) F ( t ) : F ( t ) F(t) F ( t ) represents the fraction of effluent fluid that has resided in the vessel for a time less than t t t (directly measured via a step tracer input): F ( t ) = ∫ 0 t E ( t ′ ) d t ′ , E ( t ) = d F ( t ) d t F(t) = \int_0^t E(t') \, dt', \quad E(t) = \frac{dF(t)}{dt} F ( t ) = ∫ 0 t ​ E ( t ′ ) d t ′ , E ( t ) = d t d F ( t ) ​

Statistical Moments: Mean Residence Time ( t m t_m t m ​ ) and Variance ( σ 2 \sigma^2 σ 2 )

Mean Residence Time ( t m t_m t m ​ ): The first moment of E ( t ) E(t) E ( t ) : t m = ∫ 0 ∞ t ⋅ E ( t ) d t = ∫ 0 ∞ t C ( t ) d t ∫ 0 ∞ C ( t ) d t t_m = \int_0^\infty t \cdot E(t) \, dt = \frac{\int_0^\infty t C(t) \, dt}{\int_0^\infty C(t) \, dt} t m ​ = ∫ 0 ∞ ​ t ⋅ E ( t ) d t = ∫ 0 ∞ ​ C ( t ) d t ∫ 0 ∞ ​ tC ( t ) d t ​

For constant-density systems with no stagnant dead volume, the mean residence time equals the hydrodynamic space time: t m = τ = V / v 0 t_m = \tau = V / v_0 t m ​ = τ = V / v 0 ​ . If experimental t m < V / v 0 t_m < V / v_0 t m ​ < V / v 0 ​ , the reactor contains stagnant dead volume ( V d e a d = V − v 0 t m V_{dead} = V - v_0 t_m V d e a d ​ = V − v 0 ​ t m ​ ).

Variance ( σ 2 \sigma^2 σ 2 ): The second central moment, quantifying the spread of the distribution around the mean: σ 2 = ∫ 0 ∞ ( t − t m ) 2 E ( t ) d t = [ ∫ 0 ∞ t 2 E ( t ) d t ] − t m 2 \sigma^2 = \int_0^\infty (t - t_m)^2 E(t) \, dt = \left[ \int_0^\infty t^2 E(t) \, dt \right] - t_m^2 σ 2 = ∫ 0 ∞ ​ ( t − t m ​ ) 2 E ( t ) d t = [ ∫ 0 ∞ ​ t 2 E ( t ) d t ] − t m 2 ​

Dimensionless Variance ( σ θ 2 \sigma_\theta^2 σ θ 2 ​ ): Normalized with respect to mean residence time: σ θ 2 = σ 2 t m 2 \sigma_\theta^2 = \frac{\sigma^2}{t_m^2} σ θ 2 ​ = t m 2 ​ σ 2 ​

5. Non-Ideal Flow Modeling: Tanks-in-Series & Axial Dispersion

To predict conversion in non-ideal reactors, experimental RTD parameters ( t m t_m t m ​ and σ 2 \sigma^2 σ 2 ) are mapped into one-parameter flow models.

1. Tanks-in-Series (TIS) Model

The non-ideal reactor is modeled as an equivalent cascade of N N N identical, equal-volume ideal CSTRs connected in series: TANKS-IN-SERIES (TIS) MODEL

  • Feed ---> [ Tank 1 ] ---> [ Tank 2 ] ---> ... ---> [ Tank N ] ---> Effluent
  • V_i = V / N V_i = V / N V_i = V / N

The dimensionless RTD variance for N N N equal CSTRs in series is: σ θ 2 = σ 2 t m 2 = 1 N \sigma_\theta^2 = \frac{\sigma^2}{t_m^2} = \frac{1}{N} σ θ 2 ​ = t m 2 ​ σ 2 ​ = N 1 ​

Rearranging solves directly for the number of tanks in series ( N N N ) : N = t m 2 σ 2 = 1 σ θ 2 N = \frac{t_m^2}{\sigma^2} = \frac{1}{\sigma_\theta^2} N = σ 2 t m 2 ​ ​ = σ θ 2 ​ 1 ​

Interpretation of N N N :

N = 1 N = 1 N = 1 : Single ideal CSTR (maximum backmixing, σ θ 2 = 1.0 \sigma_\theta^2 = 1.0 σ θ 2 ​ = 1.0 ).

N → ∞ N \to \infty N → ∞ : Ideal Plug Flow Reactor (zero backmixing, σ θ 2 = 0 \sigma_\theta^2 = 0 σ θ 2 ​ = 0 ).

Intermediate N N N ( 3 ≤ N ≤ 30 3 \le N \le 30 3 ≤ N ≤ 30 ): Represents real tubular reactors, packed columns, or multi-compartment vessels. While physical tanks are integers, the modeled parameter N N N is typically a real decimal number.

2. Axial Dispersion Model

In the dispersion model, non-ideal mixing is conceptualized as plug flow with a superimposed axial Fickian diffusion-like backmixing process governed by the axial dispersion coefficient ( D a x D_{ax} D a x ​ , m 2 / s \text{m}^2/\text{s} m 2 / s ): ∂ C ∂ t = D a x ∂ 2 C ∂ z 2 − u ∂ C ∂ z \frac{\partial C}{\partial t} = D_{ax} \frac{\partial^2 C}{\partial z^2} - u \frac{\partial C}{\partial z} ∂ t ∂ C ​ = D a x ​ ∂ z 2 ∂ 2 C ​ − u ∂ z ∂ C ​

The degree of backmixing is governed by the dimensionless Vessel Peclet Number ( P e r Pe_r P e r ​ ): P e r ≡ u ⋅ L D a x = L / u D a x / u 2 = τ D a x / u 2 Pe_r \equiv \frac{u \cdot L}{D_{ax}} = \frac{L / u}{D_{ax} / u^2} = \frac{\tau}{D_{ax} / u^2} P e r ​ ≡ D a x ​ u ⋅ L ​ = D a x ​ / u 2 L / u ​ = D a x ​ / u 2 τ ​

Where:

u u u = interstitial or superficial fluid velocity ( L / τ L / \tau L / τ ).

L L L = reactor length.

D a x / ( u L ) D_{ax} / (u L) D a x ​ / ( uL ) = dimensionless vessel dispersion number (the reciprocal of P e r Pe_r P e r ​ ).

Boundary Conditions and Variance Relationships:

For a closed-closed vessel (fluid enters and exits through pipes without dispersion outside the reactor boundary): σ θ 2 = σ 2 t m 2 = 2 ( D a x u L ) − 2 ( D a x u L ) 2 [ 1 − e − u L D a x ] \sigma_\theta^2 = \frac{\sigma^2}{t_m^2} = 2 \left( \frac{D_{ax}}{u L} \right) - 2 \left( \frac{D_{ax}}{u L} \right)^2 \left[ 1 - e^{-\frac{u L}{D_{ax}}} \right] σ θ 2 ​ = t m 2 ​ σ 2 ​ = 2 ( uL D a x ​ ​ ) − 2 ( uL D a x ​ ​ ) 2 [ 1 − e − D a x ​ uL ​ ]

For small extents of dispersion ( D a x / ( u L ) < 0.05 D_{ax} / (u L) < 0.05 D a x ​ / ( uL ) < 0.05 or P e r > 20 Pe_r > 20 P e r ​ > 20 , typical of chemical tubular reactors): σ θ 2 = σ 2 t m 2 ≈ 2 ( D a x u L ) = 2 P e r \sigma_\theta^2 = \frac{\sigma^2}{t_m^2} \approx 2 \left( \frac{D_{ax}}{u L} \right) = \frac{2}{Pe_r} σ θ 2 ​ = t m 2 ​ σ 2 ​ ≈ 2 ( uL D a x ​ ​ ) = P e r ​ 2 ​

Connecting the Tanks-in-Series and Dispersion models for small deviations from plug flow: N = 1 σ θ 2 ≈ P e r 2 ⟹ P e r ≈ 2 N N = \frac{1}{\sigma_\theta^2} \approx \frac{Pe_r}{2} \implies Pe_r \approx 2 N N = σ θ 2 ​ 1 ​ ≈ 2 P e r ​ ​ ⟹ P e r ​ ≈ 2 N

6. Summary Comparison Table: Heterogeneous Catalysis & Non-Ideal Flow Regimes

Phenomenon / Model Governing Dimensionless Parameter Criterion / Threshold Physical Significance & Implication

Internal Pore Diffusion Thiele Modulus: ϕ = R k v / D e f f \phi = R \sqrt{k_v / D_{eff}} ϕ = R k v ​ / D e ff ​ ​ ϕ < 0.4 ⟹ η ≈ 1.0 \phi < 0.4 \implies \eta \approx 1.0 ϕ < 0.4 ⟹ η ≈ 1.0 ; ϕ > 3.0 ⟹ η ≈ 3 / ϕ s \phi > 3.0 \implies \eta \approx 3/\phi_s ϕ > 3.0 ⟹ η ≈ 3/ ϕ s ​ High ϕ \phi ϕ starves pellet interior; observed activation energy halves ( E a p p = E / 2 E_{app} = E/2 E a pp ​ = E /2 )

Pore Diffusion Diagnostic Weisz-Prater: Φ W P = − r A ′ ( o b s ) ρ c R 2 D e f f C A s \Phi_{WP} = \frac{-r_A'(obs) \rho_c R^2}{D_{eff} C_{As}} Φ W P ​ = D e ff ​ C A s ​ − r A ′ ​ ( o b s ) ρ c ​ R 2 ​ Φ W P < 0.3 \Phi_{WP} < 0.3 Φ W P ​ < 0.3 Evaluates internal pore limitation using observable laboratory data without knowing k k k

External Film Diffusion Mears Criterion: C M = − r A ′ ( o b s ) ρ b R n k c C A b C_M = \frac{-r_A'(obs) \rho_b R n}{k_c C_{Ab}} C M ​ = k c ​ C A b ​ − r A ′ ​ ( o b s ) ρ b ​ R n ​ C M < 0.15 C_M < 0.15 C M ​ < 0.15 Proves film mass transfer resistance accounts for < 5 % < 5\% < 5% of concentration drop

Tanks-in-Series RTD Equivalent Stage Count: N = t m 2 / σ 2 N = t_m^2 / \sigma^2 N = t m 2 ​ / σ 2 N = 1 N = 1 N = 1 (CSTR) to N → ∞ N \to \infty N → ∞ (PFR) Quantifies departure from plug flow as equivalent cascade of mixed tanks

Axial Dispersion RTD Vessel Peclet Number: P e r = u L / D a x Pe_r = u L / D_{ax} P e r ​ = uL / D a x ​ P e r > 100 Pe_r > 100 P e r ​ > 100 (Near PFR); P e r < 1 Pe_r < 1 P e r ​ < 1 (Near CSTR) Relates variance to turbulent/Taylor axial dispersion: σ θ 2 ≈ 2 / P e r \sigma_\theta^2 \approx 2 / Pe_r σ θ 2 ​ ≈ 2/ P e r ​

  • 7. Comprehensive Step-by-Step Worked Numerical Example
  • Problem Statement

A chemical plant operates a fixed-bed reactor for the catalytic decomposition of an organic vapor. The reactor is packed with spherical catalyst pellets of radius R = 2.50 mm R = 2.50 \text{ mm} R = 2.50 mm ( 2.50 × 10 − 3 m 2.50 \times 10^{-3} \text{ m} 2.50 × 1 0 − 3 m ). The catalyst pellet density is ρ c = 1 , 600 kg/m 3 \rho_c = 1,600 \text{ kg/m}^3 ρ c ​ = 1 , 600 kg/m 3 , and the effective pore diffusivity is D e f f = 1.25 × 10 − 6 m 2 / s D_{eff} = 1.25 \times 10^{-6} \text{ m}^2/\text{s} D e ff ​ = 1.25 × 1 0 − 6 m 2 / s .

The reaction is first-order with intrinsic rate constant k = 5.00 × 10 − 4 m 3 / ( kg cat ⋅ s ) k = 5.00 \times 10^{-4} \text{ m}^3/(\text{kg cat}\cdot\text{s}) k = 5.00 × 1 0 − 4 m 3 / ( kg cat ⋅ s ) . The reactant concentration at the pellet outer surface is C A s = 40.0 mol/m 3 C_{As} = 40.0 \text{ mol/m}^3 C A s ​ = 40.0 mol/m 3 .

Separately, a pulse tracer test was conducted on the overall packed bed at an operating volumetric gas flow rate of v 0 = 12.0 m 3 / min v_0 = 12.0 \text{ m}^3/\text{min} v 0 ​ = 12.0 m 3 / min . The detector recorded an effluent tracer curve with a mean residence time of t m = 18.0 min t_m = 18.0 \text{ min} t m ​ = 18.0 min and a standard deviation of σ = 3.60 min \sigma = 3.60 \text{ min} σ = 3.60 min (variance σ 2 = 12.96 min 2 \sigma^2 = 12.96 \text{ min}^2 σ 2 = 12.96 min 2 ).

Calculate:

The volumetric rate constant k v k_v k v ​ ( s − 1 \text{s}^{-1} s − 1 ) and the spherical Thiele modulus ϕ s \phi_s ϕ s ​ .

The catalytic effectiveness factor η \eta η and the observed reaction rate per unit pellet volume ( − r A ( o b s ) -r_A(obs) − r A ​ ( o b s ) in mol/(m 3 ⋅ s) \text{mol/(m}^3\cdot\text{s)} mol/(m 3 ⋅ s) ).

The Weisz-Prater parameter Φ W P \Phi_{WP} Φ W P ​ and confirm whether pore diffusion limits the reaction.

The total reactor volume V V V .

The dimensionless RTD variance σ θ 2 \sigma_\theta^2 σ θ 2 ​ , equivalent number of tanks in series N N N , and the vessel Peclet number P e r Pe_r P e r ​ .

Step 1: Volumetric Rate Constant and Thiele Modulus

Convert mass-based rate constant to volume basis: k v = k ⋅ ρ c = 5.00 × 10 − 4 m 3 / ( kg ⋅ s ) × 1 , 600 kg/m 3 = 0.800 s − 1 k_v = k \cdot \rho_c = 5.00 \times 10^{-4} \text{ m}^3/(\text{kg}\cdot\text{s}) \times 1,600 \text{ kg/m}^3 = \mathbf{0.800 \text{ s}^{-1}} k v ​ = k ⋅ ρ c ​ = 5.00 × 1 0 − 4 m 3 / ( kg ⋅ s ) × 1 , 600 kg/m 3 = 0.800 s − 1

Calculate the spherical Thiele modulus: ϕ s = R k v D e f f = ( 2.50 × 10 − 3 m ) × 0.800 s − 1 1.25 × 10 − 6 m 2 / s \phi_s = R \sqrt{\frac{k_v}{D_{eff}}} = (2.50 \times 10^{-3} \text{ m}) \times \sqrt{\frac{0.800 \text{ s}^{-1}}{1.25 \times 10^{-6} \text{ m}^2/\text{s}}} ϕ s ​ = R D e ff ​ k v ​ ​ ​ = ( 2.50 × 1 0 − 3 m ) × 1.25 × 1 0 − 6 m 2 / s 0.800 s − 1 ​ ​ 0.800 1.25 × 10 − 6 = 640 , 000 = 800.0 m − 1 \sqrt{\frac{0.800}{1.25 \times 10^{-6}}} = \sqrt{640,000} = 800.0 \text{ m}^{-1} 1.25 × 1 0 − 6 0.800 ​ ​ = 640 , 000 ​ = 800.0 m − 1 ϕ s = 2.50 × 10 − 3 × 800.0 = 2.000 \phi_s = 2.50 \times 10^{-3} \times 800.0 = \mathbf{2.000} ϕ s ​ = 2.50 × 1 0 − 3 × 800.0 = 2.000

Step 2: Effectiveness Factor and Observed Reaction Rate

For a spherical pellet with ϕ s = 2.000 \phi_s = 2.000 ϕ s ​ = 2.000 : tanh ⁡ ( ϕ s ) = tanh ⁡ ( 2.000 ) = 0.96403 \tanh(\phi_s) = \tanh(2.000) = 0.96403 tanh ( ϕ s ​ ) = tanh ( 2.000 ) = 0.96403 1 tanh ⁡ ( 2.000 ) = 1 0.96403 = 1.03731 \frac{1}{\tanh(2.000)} = \frac{1}{0.96403} = 1.03731 tanh ( 2.000 ) 1 ​ = 0.96403 1 ​ = 1.03731 η = 3 ϕ s [ 1 tanh ⁡ ( ϕ s ) − 1 ϕ s ] = 3 2.000 [ 1.03731 − 1 2.000 ] = 1.500 × [ 1.03731 − 0.5000 ] = 1.500 × 0.53731 = 0.8060 \eta = \frac{3}{\phi_s} \left[ \frac{1}{\tanh(\phi_s)} - \frac{1}{\phi_s} \right] = \frac{3}{2.000} \left[ 1.03731 - \frac{1}{2.000} \right] = 1.500 \times [1.03731 - 0.5000] = 1.500 \times 0.53731 = \mathbf{0.8060} η = ϕ s ​ 3 ​ [ tanh ( ϕ s ​ ) 1 ​ − ϕ s ​ 1 ​ ] = 2.000 3 ​ [ 1.03731 − 2.000 1 ​ ] = 1.500 × [ 1.03731 − 0.5000 ] = 1.500 × 0.53731 = 0.8060

Thus, intraparticle diffusion reduces the global pellet reaction rate by 19.4 % 19.4\% 19.4% compared to an unhindered pellet.

Calculate the observed reaction rate per unit volume: − r A ( o b s ) = η ⋅ k v ⋅ C A s = 0.8060 × 0.800 s − 1 × 40.0 mol/m 3 = 25.79 mol/(m 3 ⋅ s) -r_A(obs) = \eta \cdot k_v \cdot C_{As} = 0.8060 \times 0.800 \text{ s}^{-1} \times 40.0 \text{ mol/m}^3 = \mathbf{25.79 \text{ mol/(m}^3\cdot\text{s)}} − r A ​ ( o b s ) = η ⋅ k v ​ ⋅ C A s ​ = 0.8060 × 0.800 s − 1 × 40.0 mol/m 3 = 25.79 mol/(m 3 ⋅ s)

Step 3: Weisz-Prater Parameter Φ W P = − r A ( o b s ) ⋅ R 2 D e f f ⋅ C A s = 25.79 mol/(m 3 ⋅ s) × ( 2.50 × 10 − 3 m ) 2 ( 1.25 × 10 − 6 m 2 / s ) × 40.0 mol/m 3 \Phi_{WP} = \frac{-r_A(obs) \cdot R^2}{D_{eff} \cdot C_{As}} = \frac{25.79 \text{ mol/(m}^3\cdot\text{s)} \times (2.50 \times 10^{-3} \text{ m})^2}{(1.25 \times 10^{-6} \text{ m}^2/\text{s}) \times 40.0 \text{ mol/m}^3} Φ W P ​ = D e ff ​ ⋅ C A s ​ − r A ​ ( o b s ) ⋅ R 2 ​ = ( 1.25 × 1 0 − 6 m 2 / s ) × 40.0 mol/m 3 25.79 mol/(m 3 ⋅ s) × ( 2.50 × 1 0 − 3 m ) 2 ​ Numerator = 25.79 × 6.25 × 10 − 6 = 1.6119 × 10 − 4 \text{Numerator} = 25.79 \times 6.25 \times 10^{-6} = 1.6119 \times 10^{-4} Numerator = 25.79 × 6.25 × 1 0 − 6 = 1.6119 × 1 0 − 4 Denominator = 1.25 × 10 − 6 × 40.0 = 5.00 × 10 − 5 \text{Denominator} = 1.25 \times 10^{-6} \times 40.0 = 5.00 \times 10^{-5} Denominator = 1.25 × 1 0 − 6 × 40.0 = 5.00 × 1 0 − 5 Φ W P = 1.6119 × 10 − 4 5.00 × 10 − 5 = 3.224 \Phi_{WP} = \frac{1.6119 \times 10^{-4}}{5.00 \times 10^{-5}} = \mathbf{3.224} Φ W P ​ = 5.00 × 1 0 − 5 1.6119 × 1 0 − 4 ​ = 3.224

(Note: Evaluated on the basis of generalized modulus Φ = ϕ s / 3 = 2.0 / 3 = 0.667 \Phi = \phi_s / 3 = 2.0 / 3 = 0.667 Φ = ϕ s ​ /3 = 2.0/3 = 0.667 , Φ W P , g e n = η Φ 2 = 0.806 × ( 0.667 ) 2 = 0.358 \Phi_{WP, gen} = \eta \Phi^2 = 0.806 \times (0.667)^2 = 0.358 Φ W P , g e n ​ = η Φ 2 = 0.806 × ( 0.667 ) 2 = 0.358 ). Both values indicate the onset of noticeable pore diffusion resistance.

Step 4: Hydrodynamic Reactor Volume

Assuming negligible stagnant dead zones, t m = τ t_m = \tau t m ​ = τ : V = v 0 ⋅ t m = 12.0 m 3 / min × 18.0 min = 216.0 m 3 V = v_0 \cdot t_m = 12.0 \text{ m}^3/\text{min} \times 18.0 \text{ min} = \mathbf{216.0 \text{ m}^3} V = v 0 ​ ⋅ t m ​ = 12.0 m 3 / min × 18.0 min = 216.0 m 3

Step 5: RTD Analysis (Tanks-in-Series & Dispersion)

Calculate dimensionless variance: σ θ 2 = σ 2 t m 2 = 12.96 min 2 ( 18.0 min ) 2 = 12.96 324.0 = 0.0400 \sigma_\theta^2 = \frac{\sigma^2}{t_m^2} = \frac{12.96 \text{ min}^2}{(18.0 \text{ min})^2} = \frac{12.96}{324.0} = \mathbf{0.0400} σ θ 2 ​ = t m 2 ​ σ 2 ​ = ( 18.0 min ) 2 12.96 min 2 ​ = 324.0 12.96 ​ = 0.0400

Determine the equivalent number of ideal stirred tanks in series ( N N N ): N = 1 σ θ 2 = 1 0.0400 = 25.0 tanks in series N = \frac{1}{\sigma_\theta^2} = \frac{1}{0.0400} = \mathbf{25.0 \text{ tanks in series}} N = σ θ 2 ​ 1 ​ = 0.0400 1 ​ = 25.0 tanks in series

Calculate the vessel Peclet number ( P e r Pe_r P e r ​ ) using the small-dispersion approximation: σ θ 2 ≈ 2 P e r ⟹ P e r = 2 σ θ 2 = 2 0.0400 = 50.0 \sigma_\theta^2 \approx \frac{2}{Pe_r} \implies Pe_r = \frac{2}{\sigma_\theta^2} = \frac{2}{0.0400} = \mathbf{50.0} σ θ 2 ​ ≈ P e r ​ 2 ​ ⟹ P e r ​ = σ θ 2 ​ 2 ​ = 0.0400 2 ​ = 50.0

The corresponding vessel dispersion number is D a x u L = 1 P e r = 1 50.0 = 0.020 \frac{D_{ax}}{u L} = \frac{1}{Pe_r} = \frac{1}{50.0} = 0.020 uL D a x ​ ​ = P e r ​ 1 ​ = 50.0 1 ​ = 0.020 . Because D a x / ( u L ) = 0.020 < 0.05 D_{ax}/(u L) = 0.020 < 0.05 D a x ​ / ( uL ) = 0.020 < 0.05 , the small-dispersion assumption is fully validated.

  • 8. Critical PE Exam Traps & Pitfalls
  • Trap 1: The Apparent Activation Energy Halving Trap

If laboratory experiments conducted on 6 mm 6\text{ mm} 6 mm pellets measure an activation energy of E a p p = 65 kJ/mol E_{app} = 65 \text{ kJ/mol} E a pp ​ = 65 kJ/mol in a diffusion-limited regime ( ϕ > 3 \phi > 3 ϕ > 3 ), never use 65 kJ/mol 65 \text{ kJ/mol} 65 kJ/mol as the true intrinsic chemical barrier! The true activation energy is double : E t r u e = 2 × E a p p = 130 kJ/mol E_{true} = 2 \times E_{app} = 130 \text{ kJ/mol} E t r u e ​ = 2 × E a pp ​ = 130 kJ/mol . If the plant later crushes the catalyst into fine powder ( R → 0 R \to 0 R → 0 , eliminating pore diffusion), the reaction will operate with the true barrier of 130 kJ/mol 130 \text{ kJ/mol} 130 kJ/mol , resulting in wildly higher temperature sensitivity.

Trap 2: Mixing Characteristic Lengths in Thiele Modulus

The formula η = tanh ⁡ ( ϕ ) / ϕ \eta = \tanh(\phi)/\phi η = tanh ( ϕ ) / ϕ applies strictly to flat plates using half-thickness L L L . For spherical pellets , you must use η = 3 ϕ [ 1 / tanh ⁡ ( ϕ ) − 1 / ϕ ] \eta = \frac{3}{\phi} [1/\tanh(\phi) - 1/\phi] η = ϕ 3 ​ [ 1/ tanh ( ϕ ) − 1/ ϕ ] . Alternatively, if you convert to Aris's generalized Thiele modulus Φ = ( V p / S p ) k v / D e f f = ϕ s / 3 \Phi = (V_p/S_p)\sqrt{k_v/D_{eff}} = \phi_s / 3 Φ = ( V p ​ / S p ​ ) k v ​ / D e ff ​ ​ = ϕ s ​ /3 , then η ≈ tanh ⁡ ( Φ ) / Φ \eta \approx \tanh(\Phi)/\Phi η ≈ tanh ( Φ ) /Φ provides an excellent approximation across all shapes.

Trap 3: Normalization Failure in RTD Calculations

When calculating E ( t ) E(t) E ( t ) from raw detector concentrations C ( t ) C(t) C ( t ) , you must divide each point by the total integrated area under the curve ( ∫ 0 ∞ C ( t ) d t \int_0^\infty C(t) dt ∫ 0 ∞ ​ C ( t ) d t ). Forgetting to normalize will produce an invalid distribution where probabilities do not integrate to 1.0 1.0 1.0 , rendering mean residence time and variance calculations completely erroneous.

Trap 4: Fractional Tanks in the Tanks-in-Series Model

Students often round N = t m 2 / σ 2 = 7.3 N = t_m^2 / \sigma^2 = 7.3 N = t m 2 ​ / σ 2 = 7.3 up to 8 8 8 or down to 7 7 7 . In reactor modeling, keep N = 7.3 N = 7.3 N = 7.3 as a continuous parameter in conversion equations: X = 1 − ( 1 + τ i k ) − N X = 1 - (1 + \tau_i k)^{-N} X = 1 − ( 1 + τ i ​ k ) − N where τ i = τ / N \tau_i = \tau / N τ i ​ = τ / N . Only round to integers if specifically selecting physical reactor vessels.