Study guide

11.4 Multicomponent Distillation Fundamentals and Key Components

PE Chemical Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the PE Chemical Exam How to Use This Guide and the NCEES Handbook

2 Chapter 1: Material Balances & Flowsheet Calculations

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting 1.2 Steady-State Material Balances (Reactive & Non-Reactive Systems) 1.3 Recycle, Bypass, and Purge Operations

3 Chapter 2: Energy Balances & Thermochemistry

2.1 Enthalpy Accounting, Sensible Heat, and Phase Changes 2.2 Heats of Reaction, Formation, and Adiabatic Flame Temperatures 2.3 Unsteady-State Mass and Energy Balances

4 Chapter 3: Fluid Statics & Incompressible Pipe Flow

3.1 Fluid Statics, Pressure Measurement, and Manometry 3.2 Incompressible Flow, Friction Factors, and the Moody Diagram 3.3 Minor Losses, Equivalent Length, and Piping Networks 3.4 Pumps, Compressors, and NPSH Calculations

5 Chapter 4: Advanced Fluid Dynamics & Compressible Flow

4.1 Compressible Gas Flow, Sonic Velocity, and Choked Flow 4.2 Flow Measurement Devices (Orifices, Venturis, Rotameters) 4.3 Multiphase Flow and Fluidization Principles 4.4 Mixing, Agitation, and Agitator Scale-Up

6 Chapter 5: Thermodynamic Laws & Fundamental Relations

5.1 First and Second Laws, Heat Engines, and Carnot Efficiency 5.2 Entropy, Availability, and Exergy Analysis 5.3 Fundamental Property Relations and Maxwell Equations

7 Chapter 6: Real Gases & Equations of State

6.1 Volumetric Properties and Compressibility Factor Charts 6.2 Cubic Equations of State (vdW, RK, SRK, and Peng-Robinson) 6.3 Residual Properties and Enthalpy/Entropy Departure Functions

8 Chapter 7: Phase & Chemical Reaction Equilibria

7.1 Pure Component Vapor Pressure and Phase Equilibria 7.2 Vapor-Liquid Equilibrium (VLE), Raoult's Law, and Activity Coefficients 7.3 Chemical Reaction Equilibria and Equilibrium Constant Calculation

9 Chapter 8: Heat Transfer Mechanisms & Conduction

8.1 Steady-State Conduction in Planar, Cylindrical, and Spherical Geometries 8.2 Convective Heat Transfer and Dimensionless Correlations 8.3 Thermal Radiation, Emissivity, and Surface Radiation Exchange

10 Chapter 9: Heat Exchanger Design & Phase Change

9.1 Shell-and-Tube Exchanger Design, TEMA Standards, and LMTD 9.2 Effectiveness-NTU Method and Exchanger Rating 9.3 Boiling Regimes, Condensation Phenomena, and Fouling Resistances

11 Chapter 10: Mass Transfer Fundamentals & Diffusion

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion 10.2 Convective Mass Transfer and Film Theories 10.3 Mass Transfer Dimensionless Numbers (Sherwood, Schmidt, Peclet)

12 Chapter 11: Distillation Operations

11.1 Vapor-Liquid Equilibrium and Relative Volatility in Distillation 11.2 McCabe-Thiele Method for Binary Distillation 11.3 Packed vs Tray Columns, Flooding, and Tray Hydraulics 11.4 Multicomponent Distillation Fundamentals and Key Components

13 Chapter 12: Rate-Controlled & Equilibrium Separations

12.1 Gas Absorption, Stripping, and the Kremser Equation 12.2 Liquid-Liquid Extraction and Ternary Phase Equilibria 12.3 Adsorption, Membrane Separations, and Drying Operations 12.4 Filtration, Crystallization, and Solid-Fluid Separations

14 Chapter 13: Chemical Kinetics & Ideal Isothermal Reactors

13.1 Reaction Rates, Rate Laws, and Order of Reaction 13.2 Temperature Dependence and the Arrhenius Equation 13.3 Batch Reactors and Continuous Stirred-Tank Reactors (CSTR) 13.4 Plug Flow Reactors (PFR) and Reactor Combinations

15 Chapter 14: Non-Ideal Flow, Non-Isothermal Reactors & Catalysis

14.1 Yield, Selectivity, and Multiple Reactions (Series and Parallel) 14.2 Non-Isothermal Reactor Design and Thermal Runaway 14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

16 Chapter 15: Physical & Transport Properties of Fluids

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations 15.2 Thermal Conductivity and Specific Heat Capacities 15.3 Estimation Methods and Corresponding States Principles

17 Chapter 16: Materials of Construction & Corrosion

16.1 Mechanical Properties and Materials Selection in Chemical Plants 16.2 Corrosion Mechanisms, Materials Degradation, and Prevention

18 Chapter 17: Process Safety & Pressure Relief Systems

17.1 Hazard Identification Methodologies (HAZOP, FMEA, What-If) 17.2 Pressure Relief Valve (PRV) and Rupture Disk Sizing 17.3 Flammability, Explosions, and Toxic Dispersion Limits 17.4 Inerting, Purging, Discharge Location, and Containment

19 Chapter 18: Process Control & Engineering Economics

18.1 Process Dynamics and Feedback Control Loops 18.2 PID Controller Tuning and Loop Stability 18.3 Chemical Plant Capital Cost Estimation and Profitability Analysis 18.4 Field Instrumentation, Control Valves, Alarms, and Safety Instrumented Systems

20 Chapter 19: Process Design, Equipment Selection & Environmental Compliance

19.1 Process Flow Diagrams, P&IDs, Scale-Up, and Plant Siting 19.2 Process Equipment Selection, Sizing, and Optimization 19.3 Emissions Evaluation, Mitigation, and Remediation

21 Chapter 20: Plant Operation, Reliability & Continuous Improvement

20.1 Operating Procedures, Startup, and Shutdown 20.2 Mechanical Integrity, Reliability, and Failure Mechanisms 20.3 Debottlenecking, Optimization, and Troubleshooting

11.4 Multicomponent Distillation Fundamentals and Key Components

Key Takeaways Explain This Topic AI

Multicomponent distillation requires defining two key components that dictate product split: the Light Key (LK), the most volatile component with a significant specified recovery in the bottoms, and the Heavy Key (HK), the least volatile component with a significant specified recovery in the distillate.

Non-key components are categorized based on volatility relative to the keys: Light Non-Keys (LNK, alpha_i > alpha_LK) distribute almost entirely into the distillate (d_i approx f_i), whereas Heavy Non-Keys (HNK, alpha_i < alpha_HK) distribute almost entirely into the bottoms (b_i approx f_i); components with intermediate volatilities (alpha_HK < alpha_i < alpha_LK) distribute into both products.

The multicomponent Fenske equation calculates minimum theoretical stages at total reflux (N_min) strictly from key component recoveries: N_min = ln[(d_LK / b_LK) * (b_HK / d_HK)] / ln(alpha_LK,HK,avg); total reflux component distributions are determined via (d_i / b_i) = (d_HK / b_HK) * (alpha_i,HK)^N_min.

The Underwood equations solve for minimum vapor flow V_min and minimum reflux ratio R_min: the feed root theta is found between alpha_HK and alpha_LK from sum[alpha_i * z_F,i / (alpha_i - theta)] = 1 - q, which is then substituted into the distillate equation V_min = sum[alpha_i * d_i / (alpha_i - theta)] to obtain R_min = (V_min / D) - 1.

The empirical Kirkbride equation estimates the optimal feed stage location: log10(N_R / N_S) = 0.206 * log10[(z_HK / z_LK) * (x_B,LK / x_D,HK)^2 * (B / D)], where N_R and N_S are the theoretical stages above and below the feed tray (N = N_R + N_S).

Last updated: September 2026

11.4 Multicomponent Distillation Fundamentals and Key Components

In chemical refineries, gas processing plants, and petrochemical complexes, distillation columns rarely process simple binary mixtures. Instead, columns fractionate multicomponent mixtures containing dozens of chemical species (e.g., crude atmospheric towers, deethanizers, depropanizers, and naphtha splitters). On the NCEES PE Chemical Exam , engineers are tested on shortcut design methods—specifically the Fenske-Underwood-Gilliland (FUG) sequence and the Kirkbride equation —to determine stage counts, reflux requirements, and feed tray locations without performing iterative plate-to-plate MESH calculations.

1. Key and Non-Key Component Classification

In multicomponent distillation, the chemical engineer cannot specify the complete recovery of every component independently; degrees of freedom permit specifying the separation split of only two components , designated as the key components : Volatility Order (alpha_i relative to Heavy Key):

  • alpha_1 > alpha_2 > alpha_LK > alpha_dist > alpha_HK > alpha_N
  • [--------------] [-------] [--------] [-------] [-------]
  • Light Non- Light Distributed Heavy Heavy
  • Keys (LNK) Key (LK) Component Key (HK) Non-Keys (HNK)
  • | | | | |
  • v v v v v
  • All to Distillate Specified Distributes Specified All to Bottoms
  • (d_i = f_i) Split Top/Bottom Split (b_i = f_i)
  • Definitions

Light Key (LK): The more volatile of the two key components. A small, specified fraction is allowed in the bottoms product ( b L K b_{LK} b L K ​ is specified and small; most enters distillate d L K d_{LK} d L K ​ ).

Heavy Key (HK): The less volatile of the two key components. A small, specified fraction is allowed in the distillate product ( d H K d_{HK} d HK ​ is specified and small; most enters bottoms b H K b_{HK} b HK ​ ).

Light Non-Key (LNK): Components more volatile than the light key ( α i > α L K \alpha_i > \alpha_{LK} α i ​ > α L K ​ ). Because they are lighter than the LK, they distill overhead almost completely ( d i ≈ f i , b i ≈ 0 d_i \approx f_i, b_i \approx 0 d i ​ ≈ f i ​ , b i ​ ≈ 0 ).

Heavy Non-Key (HNK): Components less volatile than the heavy key ( α i < α H K \alpha_i < \alpha_{HK} α i ​ < α HK ​ ). Because they are heavier than the HK, they discharge in the bottoms almost completely ( b i ≈ f i , d i ≈ 0 b_i \approx f_i, d_i \approx 0 b i ​ ≈ f i ​ , d i ​ ≈ 0 ).

Distributed Components: Intermediate components with volatilities between the light key and heavy key ( α H K < α i < α L K \alpha_{HK} < \alpha_i < \alpha_{LK} α HK ​ < α i ​ < α L K ​ ). These components split significantly between both distillate and bottoms products.

Material Balance Accounting

For a feed containing molar component flow rates f i = F z F , i f_i = F z_{F,i} f i ​ = F z F , i ​ :

  • Distillate molar flows: d i = D x D , i d_i = D x_{D,i} d i ​ = D x D , i ​
  • Bottoms molar flows: b i = B x B , i b_i = B x_{B,i} b i ​ = B x B , i ​
  • Component conservation: f i = d i + b i f_i = d_i + b_i f i ​ = d i ​ + b i ​
  • 2. Minimum Theoretical Stages: The Multicomponent Fenske Equation

At total reflux ( R → ∞ R \to \infty R → ∞ ), the minimum number of theoretical stages ( N m i n N_{min} N min ​ ) required to separate the light key from the heavy key is calculated from the Fenske Equation : N m i n = ln ⁡ [ ( d L K b L K ) ( b H K d H K ) ] ln ⁡ ( α L K , H K , a v g ) N_{min} = \frac{\ln\left[ \left( \frac{d_{LK}}{b_{LK}} \right) \left( \frac{b_{HK}}{d_{HK}} \right) \right]}{\ln(\alpha_{LK,HK,avg})} N min ​ = ln ( α L K , HK , a vg ​ ) ln [ ( b L K ​ d L K ​ ​ ) ( d HK ​ b HK ​ ​ ) ] ​

Where:

d L K , b L K d_{LK}, b_{LK} d L K ​ , b L K ​ = molar flow rates of light key in distillate and bottoms.

d H K , b H K d_{HK}, b_{HK} d HK ​ , b HK ​ = molar flow rates of heavy key in distillate and bottoms.

α L K , H K , a v g \alpha_{LK,HK,avg} α L K , HK , a vg ​ = geometric mean relative volatility of LK relative to HK across column terminal conditions: α L K , H K , a v g = α t o p ⋅ α b o t t o m \alpha_{LK,HK,avg} = \sqrt{\alpha_{top} \cdot \alpha_{bottom}} α L K , HK , a vg ​ = α t o p ​ ⋅ α b o tt o m ​ ​

Component Distribution at Total Reflux

Once N m i n N_{min} N min ​ is determined, the Fenske equation allows exact calculation of the split for every non-key or distributed component i i i at total reflux: d i b i = ( d H K b H K ) ( α i , H K ) N m i n \frac{d_i}{b_i} = \left( \frac{d_{HK}}{b_{HK}} \right) \left( \alpha_{i,HK} \right)^{N_{min}} b i ​ d i ​ ​ = ( b HK ​ d HK ​ ​ ) ( α i , HK ​ ) N min ​

Since f i = d i + b i = b i ( d i / b i ) + b i = b i [ 1 + ( d i / b i ) ] f_i = d_i + b_i = b_i (d_i / b_i) + b_i = b_i [1 + (d_i / b_i)] f i ​ = d i ​ + b i ​ = b i ​ ( d i ​ / b i ​ ) + b i ​ = b i ​ [ 1 + ( d i ​ / b i ​ )] , the individual flow rates are: b i = f i 1 + ( d i / b i ) , d i = f i − b i b_i = \frac{f_i}{1 + (d_i / b_i)}, \quad d_i = f_i - b_i b i ​ = 1 + ( d i ​ / b i ​ ) f i ​ ​ , d i ​ = f i ​ − b i ​

3. Minimum Reflux Ratio: The Underwood Equations

Unlike binary systems where R m i n R_{min} R min ​ is found graphically from a single pinch point, multicomponent systems experience two pinches (one above and one below the feed stage). In 1948, A. J. V. Underwood derived an analytical solution assuming constant molar overflow and constant relative volatilities.

Step 1: The Underwood Feed Equation (Finding the Active Root θ \theta θ )

The feed equation determines the characteristic root θ \theta θ : ∑ i = 1 C α i z F , i α i − θ = 1 − q \sum_{i=1}^C \frac{\alpha_i z_{F,i}}{\alpha_i - \theta} = 1 - q i = 1 ∑ C ​ α i ​ − θ α i ​ z F , i ​ ​ = 1 − q

Where:

α i \alpha_i α i ​ = relative volatility of component i i i relative to the heavy key (so α H K = 1.0 \alpha_{HK} = 1.0 α HK ​ = 1.0 ).

z F , i z_{F,i} z F , i ​ = mole fraction of component i i i in the total feed.

q q q = feed thermal quality factor ( q = 1.0 q = 1.0 q = 1.0 for saturated liquid, so 1 − q = 0 1 - q = 0 1 − q = 0 ).

Important

Selection of the Active Underwood Root ( θ \theta θ ):

The polynomial equation has C C C roots. To calculate R m i n R_{min} R min ​ for key components that are adjacent in volatility, the active root θ \theta θ must be selected strictly between the relative volatilities of the heavy key and light key : α H K < θ < α L K ⟺ 1.0 < θ < α L K \alpha_{HK} < \theta < \alpha_{LK} \iff 1.0 < \theta < \alpha_{LK} α HK ​ < θ < α L K ​ ⟺ 1.0 < θ < α L K ​

Step 2: The Underwood Distillate Equation (Finding V m i n V_{min} V min ​ and R m i n R_{min} R min ​ )

Once the active root θ \theta θ is calculated, it is substituted into the Underwood distillate equation to determine the minimum overhead vapor rate ( V m i n V_{min} V min ​ ): V m i n = ∑ i = 1 C α i d i α i − θ V_{min} = \sum_{i=1}^C \frac{\alpha_i d_i}{\alpha_i - \theta} V min ​ = i = 1 ∑ C ​ α i ​ − θ α i ​ d i ​ ​

Where d i d_i d i ​ are the molar flow rates of each component in the distillate ( d i ≈ 0 d_i \approx 0 d i ​ ≈ 0 for heavy non-keys). The minimum reflux ratio ( R m i n R_{min} R min ​ ) is then computed from: R m i n = L m i n D = V m i n − D D = V m i n D − 1 R_{min} = \frac{L_{min}}{D} = \frac{V_{min} - D}{D} = \frac{V_{min}}{D} - 1 R min ​ = D L min ​ ​ = D V min ​ − D ​ = D V min ​ ​ − 1

4. Stage-Reflux Trade-Off: The Gilliland Correlation

With N m i n N_{min} N min ​ and R m i n R_{min} R min ​ established, the chemical engineer specifies an operating reflux ratio ( R = 1.15 – 1.40 R m i n R = 1.15\text{--}1.40 R_{min} R = 1.15 – 1.40 R min ​ ). The required number of theoretical stages ( N N N ) is determined from the empirical Gilliland Correlation . Y = (N - N_min) / (N + 1) ^

  • 1.0 |*
  • | * Gilliland Correlation
  • | *

0.5 | *.

| *.

| *--..

  • 0.0 +-----------------*----+---> X = (R - R_min) / (R + 1)
  • 0.0 0.5 1.0
  • Dimensionless Gilliland Parameters
  • Reflux parameter: X = R − R m i n R + 1 X = \frac{R - R_{min}}{R + 1} X = R + 1 R − R min ​ ​
  • Stage parameter: Y = N − N m i n N + 1 Y = \frac{N - N_{min}}{N + 1} Y = N + 1 N − N min ​ ​
  • Analytical Formulations (Molokanov and Eduljee Equations)

Because reading graphs on the computer-based PE exam introduces interpolation error, use the standard analytical approximation developed by H. E. Eduljee (1975): Y = N − N m i n N + 1 = 0.75 ⋅ [ 1 − X 0.5668 ] Y = \frac{N - N_{min}}{N + 1} = 0.75 \cdot \left[ 1 - X^{0.5668} \right] Y = N + 1 N − N min ​ ​ = 0.75 ⋅ [ 1 − X 0.5668 ]

Rearranging to solve explicitly for actual theoretical stages N N N : N = N m i n + Y 1 − Y N = \frac{N_{min} + Y}{1 - Y} N = 1 − Y N min ​ + Y ​

5. Optimal Feed Stage Location: The Kirkbride Equation

Introducing feed at the wrong tray forces operating lines away from equilibrium, wasting stages. The empirical Kirkbride Equation determines the optimal ratio of theoretical stages in the rectifying section ( N R N_R N R ​ , above feed) to stripping section ( N S N_S N S ​ , below feed): log ⁡ 10 ( N R N S ) = 0.206 ⋅ log ⁡ 10 [ ( z H K z L K ) ( x B , L K x D , H K ) 2 ( B D ) ] \log_{10}\left( \frac{N_R}{N_S} \right) = 0.206 \cdot \log_{10}\left[ \left( \frac{z_{HK}}{z_{LK}} \right) \left( \frac{x_{B,LK}}{x_{D,HK}} \right)^2 \left( \frac{B}{D} \right) \right] lo g 10 ​ ( N S ​ N R ​ ​ ) = 0.206 ⋅ lo g 10 ​ [ ( z L K ​ z HK ​ ​ ) ( x D , HK ​ x B , L K ​ ​ ) 2 ( D B ​ ) ]

Where:

N R N_R N R ​ = number of theoretical stages above the feed stage.

N S N_S N S ​ = number of theoretical stages below the feed stage (including reboiler).

z L K , z H K z_{LK}, z_{HK} z L K ​ , z HK ​ = feed mole fractions of light key and heavy key.

x B , L K x_{B,LK} x B , L K ​ = mole fraction of light key in bottoms.

x D , H K x_{D,HK} x D , HK ​ = mole fraction of heavy key in distillate.

B , D B, D B , D = total bottoms and distillate molar flow rates.

Since total stages equal N = N R + N S N = N_R + N_S N = N R ​ + N S ​ , the individual section stage counts are resolved immediately: N S = N 1 + ( N R / N S ) , N R = N − N S N_S = \frac{N}{1 + (N_R / N_S)}, \quad N_R = N - N_S N S ​ = 1 + ( N R ​ / N S ​ ) N ​ , N R ​ = N − N S ​

The feed enters at stage N R + 1 N_R + 1 N R ​ + 1 counting down from the top.

6. Summary Comparison: Shortcut Methods in Multicomponent Distillation

Shortcut Method Author / Formulation Primary Input Parameters Primary Calculated Output Fundamental Assumptions

Fenske Equation Fenske (1932) d L K / b L K d_{LK}/b_{LK} d L K ​ / b L K ​ , b H K / d H K b_{HK}/d_{HK} b HK ​ / d HK ​ , α L K , H K \alpha_{LK,HK} α L K , HK ​ Minimum stages N m i n N_{min} N min ​ and non-key splits Total reflux ( R → ∞ R \to \infty R → ∞ ), constant relative volatility

Underwood Equations Underwood (1948) Feed composition z F , i z_{F,i} z F , i ​ , thermal state q q q , α i \alpha_i α i ​ Active root θ \theta θ , V m i n V_{min} V min ​ , R m i n R_{min} R min ​ Constant molar overflow (CMO), constant α i \alpha_i α i ​ , adjacent keys

Gilliland Correlation Gilliland (1940), Eduljee (1975) N m i n N_{min} N min ​ , R m i n R_{min} R min ​ , specified R R R Actual theoretical stages N N N Empirical fit of 400+ rigorous numerical column simulations

Kirkbride Equation Kirkbride (1944) Key mole fractions in feed, D , B D, B D , B , B / D B/D B / D Ratio of rectifying to stripping stages N R / N S N_R / N_S N R ​ / N S ​ Minimizes reboiler heat duty by matching feed stage composition

  • 7. Comprehensive Worked Numerical Example: Deethanizer Column Design
  • Problem Statement

A petroleum refinery designs a deethanizer fractionator to separate F = 100.0 kmol/h F = 100.0\text{ kmol/h} F = 100.0 kmol/h of a hydrocarbon feed entering as a saturated liquid ( q = 1.00 q = 1.00 q = 1.00 ).

Feed Composition & Relative Volatilities (Referenced to n-Butane, α 3 = 1.00 \alpha_3 = 1.00 α 3 ​ = 1.00 ):

Ethane (LNK): z 1 = 0.100 z_1 = 0.100 z 1 ​ = 0.100 ( f 1 = 10.0 kmol/h f_1 = 10.0\text{ kmol/h} f 1 ​ = 10.0 kmol/h ), α 1 = 5.00 \alpha_1 = 5.00 α 1 ​ = 5.00

Propane (LK): z 2 = 0.400 z_2 = 0.400 z 2 ​ = 0.400 ( f 2 = 40.0 kmol/h f_2 = 40.0\text{ kmol/h} f 2 ​ = 40.0 kmol/h ), α 2 = 2.20 \alpha_2 = 2.20 α 2 ​ = 2.20

n-Butane (HK): z 3 = 0.350 z_3 = 0.350 z 3 ​ = 0.350 ( f 3 = 35.0 kmol/h f_3 = 35.0\text{ kmol/h} f 3 ​ = 35.0 kmol/h ), α 3 = 1.00 \alpha_3 = 1.00 α 3 ​ = 1.00

n-Pentane (HNK): z 4 = 0.150 z_4 = 0.150 z 4 ​ = 0.150 ( f 4 = 15.0 kmol/h f_4 = 15.0\text{ kmol/h} f 4 ​ = 15.0 kmol/h ), α 4 = 0.40 \alpha_4 = 0.40 α 4 ​ = 0.40

Separation Targets:

Recover 98.0 % 98.0\% 98.0% of Propane (LK) in the distillate ( d 2 = 0.980 × 40.0 = 39.20 kmol/h d_2 = 0.980 \times 40.0 = 39.20\text{ kmol/h} d 2 ​ = 0.980 × 40.0 = 39.20 kmol/h , b 2 = 0.80 kmol/h b_2 = 0.80\text{ kmol/h} b 2 ​ = 0.80 kmol/h ).

Recover 98.0 % 98.0\% 98.0% of n-Butane (HK) in the bottoms ( b 3 = 0.980 × 35.0 = 34.30 kmol/h b_3 = 0.980 \times 35.0 = 34.30\text{ kmol/h} b 3 ​ = 0.980 × 35.0 = 34.30 kmol/h , d 3 = 0.70 kmol/h d_3 = 0.70\text{ kmol/h} d 3 ​ = 0.70 kmol/h ).

Light Non-Key (Ethane) distributes entirely overhead: d 1 = 10.00 kmol/h d_1 = 10.00\text{ kmol/h} d 1 ​ = 10.00 kmol/h , b 1 = 0.00 kmol/h b_1 = 0.00\text{ kmol/h} b 1 ​ = 0.00 kmol/h .

Heavy Non-Key (n-Pentane) discharges entirely in bottoms: b 4 = 15.00 kmol/h b_4 = 15.00\text{ kmol/h} b 4 ​ = 15.00 kmol/h , d 4 = 0.00 kmol/h d_4 = 0.00\text{ kmol/h} d 4 ​ = 0.00 kmol/h .

Calculate:

Total distillate ( D D D ) and bottoms ( B B B ) flow rates.

Minimum theoretical stages ( N m i n N_{min} N min ​ ) via the Fenske equation.

The exact active root θ \theta θ from the Underwood feed equation.

The minimum vapor rate ( V m i n V_{min} V min ​ ) and minimum reflux ratio ( R m i n R_{min} R min ​ ).

For an operating reflux ratio R = 1.30 R m i n R = 1.30 \, R_{min} R = 1.30 R min ​ , find the actual theoretical stages ( N N N ) using the Eduljee-Gilliland correlation.

The optimal feed stage location using the Kirkbride equation.

Step 1: Total Product Flow Rates D = d 1 + d 2 + d 3 + d 4 = 10.00 + 39.20 + 0.70 + 0.00 = 49.90 kmol/h D = d_1 + d_2 + d_3 + d_4 = 10.00 + 39.20 + 0.70 + 0.00 = \mathbf{49.90\text{ kmol/h}} D = d 1 ​ + d 2 ​ + d 3 ​ + d 4 ​ = 10.00 + 39.20 + 0.70 + 0.00 = 49.90 kmol/h B = b 1 + b 2 + b 3 + b 4 = 0.00 + 0.80 + 34.30 + 15.00 = 50.10 kmol/h B = b_1 + b_2 + b_3 + b_4 = 0.00 + 0.80 + 34.30 + 15.00 = \mathbf{50.10\text{ kmol/h}} B = b 1 ​ + b 2 ​ + b 3 ​ + b 4 ​ = 0.00 + 0.80 + 34.30 + 15.00 = 50.10 kmol/h

Check: D + B = 49.90 + 50.10 = 100.00 kmol/h = F D + B = 49.90 + 50.10 = 100.00\text{ kmol/h} = F D + B = 49.90 + 50.10 = 100.00 kmol/h = F .

Distillate mole fractions: x D , 1 = 10.00 / 49.90 = 0.2004 , x D , 2 = 39.20 / 49.90 = 0.7856 x_{D,1} = 10.00 / 49.90 = 0.2004, \quad x_{D,2} = 39.20 / 49.90 = 0.7856 x D , 1 ​ = 10.00/49.90 = 0.2004 , x D , 2 ​ = 39.20/49.90 = 0.7856 x D , 3 = 0.70 / 49.90 = 0.01403 , x D , 4 = 0.00 x_{D,3} = 0.70 / 49.90 = 0.01403, \quad x_{D,4} = 0.00 x D , 3 ​ = 0.70/49.90 = 0.01403 , x D , 4 ​ = 0.00

Bottoms mole fractions: x B , 1 = 0.00 , x B , 2 = 0.80 / 50.10 = 0.01597 x_{B,1} = 0.00, \quad x_{B,2} = 0.80 / 50.10 = 0.01597 x B , 1 ​ = 0.00 , x B , 2 ​ = 0.80/50.10 = 0.01597 x B , 3 = 34.30 / 50.10 = 0.6846 , x B , 4 = 15.00 / 50.10 = 0.2994 x_{B,3} = 34.30 / 50.10 = 0.6846, \quad x_{B,4} = 15.00 / 50.10 = 0.2994 x B , 3 ​ = 34.30/50.10 = 0.6846 , x B , 4 ​ = 15.00/50.10 = 0.2994

Step 2: Minimum Stages ( N m i n N_{min} N min ​ ) via Fenske Equation α L K , H K = α 2 α 3 = 2.20 1.00 = 2.20 \alpha_{LK,HK} = \frac{\alpha_2}{\alpha_3} = \frac{2.20}{1.00} = 2.20 α L K , HK ​ = α 3 ​ α 2 ​ ​ = 1.00 2.20 ​ = 2.20 d L K b L K = 39.20 0.80 = 49.00 , b H K d H K = 34.30 0.70 = 49.00 \frac{d_{LK}}{b_{LK}} = \frac{39.20}{0.80} = 49.00, \quad \frac{b_{HK}}{d_{HK}} = \frac{34.30}{0.70} = 49.00 b L K ​ d L K ​ ​ = 0.80 39.20 ​ = 49.00 , d HK ​ b HK ​ ​ = 0.70 34.30 ​ = 49.00 N m i n = ln ⁡ ( 49.00 × 49.00 ) ln ⁡ ( 2.20 ) = ln ⁡ ( 2 , 401.0 ) ln ⁡ ( 2.20 ) = 7.7836 0.78846 = 9.872 stages N_{min} = \frac{\ln(49.00 \times 49.00)}{\ln(2.20)} = \frac{\ln(2,401.0)}{\ln(2.20)} = \frac{7.7836}{0.78846} = \mathbf{9.872\text{ stages}} N min ​ = ln ( 2.20 ) ln ( 49.00 × 49.00 ) ​ = ln ( 2.20 ) ln ( 2 , 401.0 ) ​ = 0.78846 7.7836 ​ = 9.872 stages

Step 3: Underwood Active Root ( θ \theta θ )

Since feed is saturated liquid ( q = 1.00 q = 1.00 q = 1.00 ), 1 − q = 0.0 1 - q = 0.0 1 − q = 0.0 . The feed equation is: ∑ i = 1 4 α i z F , i α i − θ = 5.00 ( 0.100 ) 5.00 − θ + 2.20 ( 0.400 ) 2.20 − θ + 1.00 ( 0.350 ) 1.00 − θ + 0.40 ( 0.150 ) 0.40 − θ = 0 \sum_{i=1}^4 \frac{\alpha_i z_{F,i}}{\alpha_i - \theta} = \frac{5.00(0.100)}{5.00 - \theta} + \frac{2.20(0.400)}{2.20 - \theta} + \frac{1.00(0.350)}{1.00 - \theta} + \frac{0.40(0.150)}{0.40 - \theta} = 0 i = 1 ∑ 4 ​ α i ​ − θ α i ​ z F , i ​ ​ = 5.00 − θ 5.00 ( 0.100 ) ​ + 2.20 − θ 2.20 ( 0.400 ) ​ + 1.00 − θ 1.00 ( 0.350 ) ​ + 0.40 − θ 0.40 ( 0.150 ) ​ = 0 0.500 5.00 − θ + 0.880 2.20 − θ + 0.350 1.00 − θ + 0.060 0.40 − θ = 0 \frac{0.500}{5.00 - \theta} + \frac{0.880}{2.20 - \theta} + \frac{0.350}{1.00 - \theta} + \frac{0.060}{0.40 - \theta} = 0 5.00 − θ 0.500 ​ + 2.20 − θ 0.880 ​ + 1.00 − θ 0.350 ​ + 0.40 − θ 0.060 ​ = 0

The root must lie between α H K = 1.00 \alpha_{HK} = 1.00 α HK ​ = 1.00 and α L K = 2.20 \alpha_{LK} = 2.20 α L K ​ = 2.20 .

Test θ = 1.325 \theta = 1.325 θ = 1.325 :

Term 1: 0.500 / ( 5.00 − 1.325 ) = 0.500 / 3.675 = + 0.13605 0.500 / (5.00 - 1.325) = 0.500 / 3.675 = +0.13605 0.500/ ( 5.00 − 1.325 ) = 0.500/3.675 = + 0.13605

Term 2: 0.880 / ( 2.20 − 1.325 ) = 0.880 / 0.875 = + 1.00571 0.880 / (2.20 - 1.325) = 0.880 / 0.875 = +1.00571 0.880/ ( 2.20 − 1.325 ) = 0.880/0.875 = + 1.00571

Term 3: 0.350 / ( 1.00 − 1.325 ) = 0.350 / ( − 0.325 ) = − 1.07692 0.350 / (1.00 - 1.325) = 0.350 / (-0.325) = -1.07692 0.350/ ( 1.00 − 1.325 ) = 0.350/ ( − 0.325 ) = − 1.07692

Term 4: 0.060 / ( 0.40 − 1.325 ) = 0.060 / ( − 0.925 ) = − 0.06486 0.060 / (0.40 - 1.325) = 0.060 / (-0.925) = -0.06486 0.060/ ( 0.40 − 1.325 ) = 0.060/ ( − 0.925 ) = − 0.06486 Sum = 0.13605 + 1.00571 − 1.07692 − 0.06486 = 0.0000 \text{Sum} = 0.13605 + 1.00571 - 1.07692 - 0.06486 = \mathbf{0.0000} Sum = 0.13605 + 1.00571 − 1.07692 − 0.06486 = 0.0000

The exact active root is θ = 1.3250 \mathbf{\theta = 1.3250} θ = 1.3250 .

Step 4: Minimum Reflux Ratio ( R m i n R_{min} R min ​ )

Substitute θ = 1.3250 \theta = 1.3250 θ = 1.3250 into the distillate equation ( d 4 = 0 d_4 = 0 d 4 ​ = 0 ): V m i n = α 1 d 1 α 1 − θ + α 2 d 2 α 2 − θ + α 3 d 3 α 3 − θ V_{min} = \frac{\alpha_1 d_1}{\alpha_1 - \theta} + \frac{\alpha_2 d_2}{\alpha_2 - \theta} + \frac{\alpha_3 d_3}{\alpha_3 - \theta} V min ​ = α 1 ​ − θ α 1 ​ d 1 ​ ​ + α 2 ​ − θ α 2 ​ d 2 ​ ​ + α 3 ​ − θ α 3 ​ d 3 ​ ​ V m i n = 5.00 ( 10.00 ) 5.00 − 1.325 + 2.20 ( 39.20 ) 2.20 − 1.325 + 1.00 ( 0.70 ) 1.00 − 1.325 V_{min} = \frac{5.00(10.00)}{5.00 - 1.325} + \frac{2.20(39.20)}{2.20 - 1.325} + \frac{1.00(0.70)}{1.00 - 1.325} V min ​ = 5.00 − 1.325 5.00 ( 10.00 ) ​ + 2.20 − 1.325 2.20 ( 39.20 ) ​ + 1.00 − 1.325 1.00 ( 0.70 ) ​ V m i n = 50.00 3.675 + 86.24 0.875 − 0.70 0.325 = 13.605 + 98.560 − 2.154 = 110.011 kmol/h V_{min} = \frac{50.00}{3.675} + \frac{86.24}{0.875} - \frac{0.70}{0.325} = 13.605 + 98.560 - 2.154 = \mathbf{110.011\text{ kmol/h}} V min ​ = 3.675 50.00 ​ + 0.875 86.24 ​ − 0.325 0.70 ​ = 13.605 + 98.560 − 2.154 = 110.011 kmol/h

Minimum reflux ratio: R m i n = V m i n − D D = 110.011 − 49.90 49.90 = 60.111 49.90 = 1.2046 R_{min} = \frac{V_{min} - D}{D} = \frac{110.011 - 49.90}{49.90} = \frac{60.111}{49.90} = \mathbf{1.2046} R min ​ = D V min ​ − D ​ = 49.90 110.011 − 49.90 ​ = 49.90 60.111 ​ = 1.2046

Step 5: Actual Theoretical Stages via Gilliland Correlation

Operating reflux ratio: R = 1.30 × R m i n = 1.30 × 1.2046 = 1.5660 R = 1.30 \times R_{min} = 1.30 \times 1.2046 = \mathbf{1.5660} R = 1.30 × R min ​ = 1.30 × 1.2046 = 1.5660

Dimensionless reflux parameter: X = R − R m i n R + 1 = 1.5660 − 1.2046 1.5660 + 1.00 = 0.3614 2.5660 = 0.1408 X = \frac{R - R_{min}}{R + 1} = \frac{1.5660 - 1.2046}{1.5660 + 1.00} = \frac{0.3614}{2.5660} = \mathbf{0.1408} X = R + 1 R − R min ​ ​ = 1.5660 + 1.00 1.5660 − 1.2046 ​ = 2.5660 0.3614 ​ = 0.1408

Using Eduljee's equation: Y = 0.75 [ 1 − X 0.5668 ] = 0.75 [ 1 − ( 0.1408 ) 0.5668 ] Y = 0.75 \left[ 1 - X^{0.5668} \right] = 0.75 \left[ 1 - (0.1408)^{0.5668} \right] Y = 0.75 [ 1 − X 0.5668 ] = 0.75 [ 1 − ( 0.1408 ) 0.5668 ] ( 0.1408 ) 0.5668 = 0.3299 ⟹ Y = 0.75 × ( 1 − 0.3299 ) = 0.75 × 0.6701 = 0.5026 (0.1408)^{0.5668} = 0.3299 \implies Y = 0.75 \times (1 - 0.3299) = 0.75 \times 0.6701 = \mathbf{0.5026} ( 0.1408 ) 0.5668 = 0.3299 ⟹ Y = 0.75 × ( 1 − 0.3299 ) = 0.75 × 0.6701 = 0.5026

Calculate actual stages N N N : Y = N − N m i n N + 1 ⟹ N = N m i n + Y 1 − Y = 9.872 + 0.5026 1 − 0.5026 = 10.3746 0.4974 = 20.86 ≈ 21 theoretical stages Y = \frac{N - N_{min}}{N + 1} \implies N = \frac{N_{min} + Y}{1 - Y} = \frac{9.872 + 0.5026}{1 - 0.5026} = \frac{10.3746}{0.4974} = \mathbf{20.86 \approx 21\text{ theoretical stages}} Y = N + 1 N − N min ​ ​ ⟹ N = 1 − Y N min ​ + Y ​ = 1 − 0.5026 9.872 + 0.5026 ​ = 0.4974 10.3746 ​ = 20.86 ≈ 21 theoretical stages

Step 6: Feed Stage Location via Kirkbride Equation log ⁡ 10 ( N R N S ) = 0.206 ⋅ log ⁡ 10 [ ( z H K z L K ) ( x B , L K x D , H K ) 2 ( B D ) ] \log_{10}\left( \frac{N_R}{N_S} \right) = 0.206 \cdot \log_{10}\left[ \left( \frac{z_{HK}}{z_{LK}} \right) \left( \frac{x_{B,LK}}{x_{D,HK}} \right)^2 \left( \frac{B}{D} \right) \right] lo g 10 ​ ( N S ​ N R ​ ​ ) = 0.206 ⋅ lo g 10 ​ [ ( z L K ​ z HK ​ ​ ) ( x D , HK ​ x B , L K ​ ​ ) 2 ( D B ​ ) ]

Input values:

z H K / z L K = 0.350 / 0.400 = 0.875 z_{HK} / z_{LK} = 0.350 / 0.400 = 0.875 z HK ​ / z L K ​ = 0.350/0.400 = 0.875

x B , L K / x D , H K = 0.01597 / 0.01403 = 1.1383 x_{B,LK} / x_{D,HK} = 0.01597 / 0.01403 = 1.1383 x B , L K ​ / x D , HK ​ = 0.01597/0.01403 = 1.1383

( x B , L K / x D , H K ) 2 = ( 1.1383 ) 2 = 1.2957 (x_{B,LK} / x_{D,HK})^2 = (1.1383)^2 = 1.2957 ( x B , L K ​ / x D , HK ​ ) 2 = ( 1.1383 ) 2 = 1.2957

B / D = 50.10 / 49.90 = 1.0040 B / D = 50.10 / 49.90 = 1.0040 B / D = 50.10/49.90 = 1.0040

Term inside brackets: Bracket = 0.875 × 1.2957 × 1.0040 = 1.1383 \text{Bracket} = 0.875 \times 1.2957 \times 1.0040 = 1.1383 Bracket = 0.875 × 1.2957 × 1.0040 = 1.1383 log ⁡ 10 ( 1.1383 ) = 0.05626 \log_{10}(1.1383) = 0.05626 lo g 10 ​ ( 1.1383 ) = 0.05626 log ⁡ 10 ( N R N S ) = 0.206 × 0.05626 = 0.01159 \log_{10}\left( \frac{N_R}{N_S} \right) = 0.206 \times 0.05626 = 0.01159 lo g 10 ​ ( N S ​ N R ​ ​ ) = 0.206 × 0.05626 = 0.01159 N R N S = 10 0.01159 = 1.0271 \frac{N_R}{N_S} = 10^{0.01159} = \mathbf{1.0271} N S ​ N R ​ ​ = 1 0 0.01159 = 1.0271

With N R + N S = 21 N_R + N_S = 21 N R ​ + N S ​ = 21 : 1.0271 N S + N S = 21 ⟹ 2.0271 N S = 21 ⟹ N S = 10.36 ≈ 10 stages (stripping) 1.0271 N_S + N_S = 21 \implies 2.0271 N_S = 21 \implies N_S = 10.36 \approx \mathbf{10\text{ stages (stripping)}} 1.0271 N S ​ + N S ​ = 21 ⟹ 2.0271 N S ​ = 21 ⟹ N S ​ = 10.36 ≈ 10 stages (stripping) N R = 21 − 10 = 11 stages (rectifying) N_R = 21 - 10 = \mathbf{11\text{ stages (rectifying)}} N R ​ = 21 − 10 = 11 stages (rectifying)

The feed should enter at Stage 11 or 12 from the top .

  • 7. Critical PE Exam Traps & Pitfalls
  • Trap 1: Selecting the Wrong Underwood Root ( θ \theta θ )

The Underwood feed equation has multiple roots. A critical exam error is picking a root outside the interval between the heavy key and light key ( α H K < θ < α L K \alpha_{HK} < \theta < \alpha_{LK} α HK ​ < θ < α L K ​ ). Selecting θ < α H K \theta < \alpha_{HK} θ < α HK ​ or θ > α L K \theta > \alpha_{LK} θ > α L K ​ produces nonsensical or negative minimum reflux ratios.

Trap 2: Misidentifying Distributed Components

Do not assume all non-keys go 100 % 100\% 100% to top or bottom! If a feed component has a relative volatility intermediate between the light key and heavy key, it is a distributed key and splits between both products. Its distribution must be checked using Fenske's equation before evaluating Underwood's distillate equation.

Trap 3: Inverting the Ratios in the Kirkbride Equation

Notice carefully: Kirkbride's equation uses ( z H K / z L K ) (z_{HK} / z_{LK}) ( z HK ​ / z L K ​ ) —heavy key over light key—multiplied by ( x B , L K / x D , H K ) 2 (x_{B,LK} / x_{D,HK})^2 ( x B , L K ​ / x D , HK ​ ) 2 —bottoms light key over distillate heavy key. Inverting either ratio flips N R / N S N_R / N_S N R ​ / N S ​ , placing the feed tray in the completely wrong half of the column!