Study guide

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations

PE Chemical Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the PE Chemical Exam How to Use This Guide and the NCEES Handbook

2 Chapter 1: Material Balances & Flowsheet Calculations

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting 1.2 Steady-State Material Balances (Reactive & Non-Reactive Systems) 1.3 Recycle, Bypass, and Purge Operations

3 Chapter 2: Energy Balances & Thermochemistry

2.1 Enthalpy Accounting, Sensible Heat, and Phase Changes 2.2 Heats of Reaction, Formation, and Adiabatic Flame Temperatures 2.3 Unsteady-State Mass and Energy Balances

4 Chapter 3: Fluid Statics & Incompressible Pipe Flow

3.1 Fluid Statics, Pressure Measurement, and Manometry 3.2 Incompressible Flow, Friction Factors, and the Moody Diagram 3.3 Minor Losses, Equivalent Length, and Piping Networks 3.4 Pumps, Compressors, and NPSH Calculations

5 Chapter 4: Advanced Fluid Dynamics & Compressible Flow

4.1 Compressible Gas Flow, Sonic Velocity, and Choked Flow 4.2 Flow Measurement Devices (Orifices, Venturis, Rotameters) 4.3 Multiphase Flow and Fluidization Principles 4.4 Mixing, Agitation, and Agitator Scale-Up

6 Chapter 5: Thermodynamic Laws & Fundamental Relations

5.1 First and Second Laws, Heat Engines, and Carnot Efficiency 5.2 Entropy, Availability, and Exergy Analysis 5.3 Fundamental Property Relations and Maxwell Equations

7 Chapter 6: Real Gases & Equations of State

6.1 Volumetric Properties and Compressibility Factor Charts 6.2 Cubic Equations of State (vdW, RK, SRK, and Peng-Robinson) 6.3 Residual Properties and Enthalpy/Entropy Departure Functions

8 Chapter 7: Phase & Chemical Reaction Equilibria

7.1 Pure Component Vapor Pressure and Phase Equilibria 7.2 Vapor-Liquid Equilibrium (VLE), Raoult's Law, and Activity Coefficients 7.3 Chemical Reaction Equilibria and Equilibrium Constant Calculation

9 Chapter 8: Heat Transfer Mechanisms & Conduction

8.1 Steady-State Conduction in Planar, Cylindrical, and Spherical Geometries 8.2 Convective Heat Transfer and Dimensionless Correlations 8.3 Thermal Radiation, Emissivity, and Surface Radiation Exchange

10 Chapter 9: Heat Exchanger Design & Phase Change

9.1 Shell-and-Tube Exchanger Design, TEMA Standards, and LMTD 9.2 Effectiveness-NTU Method and Exchanger Rating 9.3 Boiling Regimes, Condensation Phenomena, and Fouling Resistances

11 Chapter 10: Mass Transfer Fundamentals & Diffusion

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion 10.2 Convective Mass Transfer and Film Theories 10.3 Mass Transfer Dimensionless Numbers (Sherwood, Schmidt, Peclet)

12 Chapter 11: Distillation Operations

11.1 Vapor-Liquid Equilibrium and Relative Volatility in Distillation 11.2 McCabe-Thiele Method for Binary Distillation 11.3 Packed vs Tray Columns, Flooding, and Tray Hydraulics 11.4 Multicomponent Distillation Fundamentals and Key Components

13 Chapter 12: Rate-Controlled & Equilibrium Separations

12.1 Gas Absorption, Stripping, and the Kremser Equation 12.2 Liquid-Liquid Extraction and Ternary Phase Equilibria 12.3 Adsorption, Membrane Separations, and Drying Operations 12.4 Filtration, Crystallization, and Solid-Fluid Separations

14 Chapter 13: Chemical Kinetics & Ideal Isothermal Reactors

13.1 Reaction Rates, Rate Laws, and Order of Reaction 13.2 Temperature Dependence and the Arrhenius Equation 13.3 Batch Reactors and Continuous Stirred-Tank Reactors (CSTR) 13.4 Plug Flow Reactors (PFR) and Reactor Combinations

15 Chapter 14: Non-Ideal Flow, Non-Isothermal Reactors & Catalysis

14.1 Yield, Selectivity, and Multiple Reactions (Series and Parallel) 14.2 Non-Isothermal Reactor Design and Thermal Runaway 14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

16 Chapter 15: Physical & Transport Properties of Fluids

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations 15.2 Thermal Conductivity and Specific Heat Capacities 15.3 Estimation Methods and Corresponding States Principles

17 Chapter 16: Materials of Construction & Corrosion

16.1 Mechanical Properties and Materials Selection in Chemical Plants 16.2 Corrosion Mechanisms, Materials Degradation, and Prevention

18 Chapter 17: Process Safety & Pressure Relief Systems

17.1 Hazard Identification Methodologies (HAZOP, FMEA, What-If) 17.2 Pressure Relief Valve (PRV) and Rupture Disk Sizing 17.3 Flammability, Explosions, and Toxic Dispersion Limits 17.4 Inerting, Purging, Discharge Location, and Containment

19 Chapter 18: Process Control & Engineering Economics

18.1 Process Dynamics and Feedback Control Loops 18.2 PID Controller Tuning and Loop Stability 18.3 Chemical Plant Capital Cost Estimation and Profitability Analysis 18.4 Field Instrumentation, Control Valves, Alarms, and Safety Instrumented Systems

20 Chapter 19: Process Design, Equipment Selection & Environmental Compliance

19.1 Process Flow Diagrams, P&IDs, Scale-Up, and Plant Siting 19.2 Process Equipment Selection, Sizing, and Optimization 19.3 Emissions Evaluation, Mitigation, and Remediation

21 Chapter 20: Plant Operation, Reliability & Continuous Improvement

20.1 Operating Procedures, Startup, and Shutdown 20.2 Mechanical Integrity, Reliability, and Failure Mechanisms 20.3 Debottlenecking, Optimization, and Troubleshooting

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations

Key Takeaways Explain This Topic AI

Saturated liquid density is accurately estimated using the Rackett equation V_sat = (R * T_c / P_c) * Z_RA^[1 + (1 - T_r)^(2/7)], providing molar volume within 1-2% error up to reduced temperatures of T_r ≈ 0.95.

Specific gravity (SG) compares liquid density to pure water at 4°C (1,000 kg/m³ or 62.43 lbm/ft³) or 60°F (62.37 lbm/ft³); API gravity (°API = 141.5 / SG_60/60F - 131.5) scales inversely with density, where higher °API signifies a lighter, lower-density hydrocarbon.

Dynamic (absolute) viscosity μ (cP, Pa·s, lbm/(ft·s)) and kinematic viscosity ν = μ / ρ (cSt, m²/s, ft²/s) must never be confused: 1 cP = 10⁻³ Pa·s = 6.7197 × 10⁻⁴ lbm/(ft·s) and 1 cSt = 10⁻⁶ m²/s = 1.0764 × 10⁻⁵ ft²/s.

Non-Newtonian fluid behaviors diverge from Newton's linear law: pseudoplastics (shear-thinning, n < 1) exhibit decreasing apparent viscosity μ_app = K * (γ_dot)^(n-1) with shear rate, dilatants (shear-thickening, n > 1) exhibit increasing viscosity, and Bingham plastics require exceeding a yield stress τ_0 to initiate flow.

Temperature effects on viscosity are diametrically opposed between phases: liquid viscosity decreases exponentially with temperature via Andrade's relation ln(μ) = A + B/T due to thermal expansion weakening intermolecular cohesive forces, whereas gas viscosity increases with temperature (μ ∝ T^(1/2) or Sutherland's formula) due to increased molecular collision frequency.

Last updated: September 2026

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations

Accurate evaluation of fluid density and viscosity is essential for solving core chemical engineering problems on the NCEES PE Chemical Exam , including line sizing, pump and compressor power calculations, frictional head loss determination via the Moody diagram, and boundary layer transport analysis. Chemical process streams span pure solvents, cryogenic liquefied gases, heavy crude oils, non-Newtonian polymer melts, and high-pressure supercritical gases.

  • 1. Fluid Density and Specific Gravity Formulations
  • Mass Density, Specific Volume, and Specific Gravity

Mass density ( ρ \rho ρ ) is defined as mass per unit volume ( kg/m 3 \text{kg/m}^3 kg/m 3 or lbm/ft 3 \text{lbm/ft}^3 lbm/ft 3 ). Its reciprocal is specific volume ( v = 1 / ρ v = 1/\rho v = 1/ ρ , with units m 3 / kg \text{m}^3/\text{kg} m 3 / kg or ft 3 / lbm \text{ft}^3/\text{lbm} ft 3 / lbm ). On a molar basis, molar density is ρ m = ρ / M \rho_m = \rho / M ρ m ​ = ρ / M and molar volume is V = M / ρ V = M / \rho V = M / ρ , where M M M is the molecular weight.

Specific gravity ( S G SG SG ) is a dimensionless ratio comparing the density of a target fluid to the density of a standard reference fluid at specified reference temperatures: S G = ρ fluid ( T ) ρ ref ( T ref ) SG = \frac{\rho_{\text{fluid}}(T)}{\rho_{\text{ref}}(T_{\text{ref}})} SG = ρ ref ​ ( T ref ​ ) ρ fluid ​ ( T ) ​

Liquids (Standard Reference): Pure liquid water at its maximum density point ( 4.0 ∘ C 4.0^\circ\text{C} 4. 0 ∘ C or 39.2 ∘ F 39.2^\circ\text{F} 39. 2 ∘ F and 1.0 atm 1.0\text{ atm} 1.0 atm ): ρ water ( 4 ∘ C ) = 1000.0 kg/m 3 = 1.0000 g/cm 3 = 62.428 lbm/ft 3 = 8.3454 lb/gal \rho_{\text{water}}(4^\circ\text{C}) = 1000.0\text{ kg/m}^3 = 1.0000\text{ g/cm}^3 = 62.428\text{ lbm/ft}^3 = 8.3454\text{ lb/gal} ρ water ​ ( 4 ∘ C ) = 1000.0 kg/m 3 = 1.0000 g/cm 3 = 62.428 lbm/ft 3 = 8.3454 lb/gal

Petroleum Industry Standard ( S G 60 / 60 ∘ F SG_{60/60^\circ\text{F}} S G 60/6 0 ∘ F ​ ): In petroleum refining and custody transfer, specific gravity is evaluated at 60.0 ∘ F 60.0^\circ\text{F} 60. 0 ∘ F ( 15.56 ∘ C 15.56^\circ\text{C} 15.5 6 ∘ C ) relative to water at 60.0 ∘ F 60.0^\circ\text{F} 60. 0 ∘ F : ρ water ( 60 ∘ F ) = 999.01 kg/m 3 = 62.366 lbm/ft 3 = 8.3371 lb/gal \rho_{\text{water}}(60^\circ\text{F}) = 999.01\text{ kg/m}^3 = 62.366\text{ lbm/ft}^3 = 8.3371\text{ lb/gal} ρ water ​ ( 6 0 ∘ F ) = 999.01 kg/m 3 = 62.366 lbm/ft 3 = 8.3371 lb/gal

Gases (Standard Reference): Dry air at 0 ∘ C 0^\circ\text{C} 0 ∘ C ( 32 ∘ F 32^\circ\text{F} 3 2 ∘ F ) or 60 ∘ F 60^\circ\text{F} 6 0 ∘ F and 1.0 atm 1.0\text{ atm} 1.0 atm ( M air = 28.964 kg/kmol M_{\text{air}} = 28.964\text{ kg/kmol} M air ​ = 28.964 kg/kmol or lbm/lbmol \text{lbm/lbmol} lbm/lbmol ): S G gas = M gas M air SG_{\text{gas}} = \frac{M_{\text{gas}}}{M_{\text{air}}} S G gas ​ = M air ​ M gas ​ ​

API Gravity ( ∘ API ^\circ\text{API} ∘ API ) and Baumé Scales ( ∘ B e ˊ ^\circ\text{Bé} ∘ B e ˊ )

In petroleum refining, the American Petroleum Institute defined the API Gravity scale to characterize crude fractions: ∘ API = 141.5 S G 60 / 60 ∘ F − 131.5 ⟺ S G 60 / 60 ∘ F = 141.5 ∘ API + 131.5 ^\circ\text{API} = \frac{141.5}{SG_{60/60^\circ\text{F}}} - 131.5 \iff SG_{60/60^\circ\text{F}} = \frac{141.5}{^\circ\text{API} + 131.5} ∘ API = S G 60/6 0 ∘ F ​ 141.5 ​ − 131.5 ⟺ S G 60/6 0 ∘ F ​ = ∘ API + 131.5 141.5 ​

Notice the strict inverse mathematical relationship: as fluid density increases, API gravity decreases .

Water ( S G = 1.000 SG = 1.000 SG = 1.000 ) corresponds exactly to 10.0 ∘ API 10.0^\circ\text{API} 10. 0 ∘ API .

Light crudes ( > 31.1 ∘ API > 31.1^\circ\text{API} > 31. 1 ∘ API ) have S G < 0.870 SG < 0.870 SG < 0.870 (e.g., gasoline ≈ 60 ∘ API \approx 60^\circ\text{API} ≈ 6 0 ∘ API , kerosene ≈ 42 ∘ API \approx 42^\circ\text{API} ≈ 4 2 ∘ API ).

Heavy crudes ( < 22.3 ∘ API < 22.3^\circ\text{API} < 22. 3 ∘ API ) have S G > 0.920 SG > 0.920 SG > 0.920 .

Bitumen and extra-heavy oils have ∘ API < 10.0 ∘ ^\circ\text{API} < 10.0^\circ ∘ API < 10. 0 ∘ , meaning S G > 1.000 SG > 1.000 SG > 1.000 , causing them to sink in water.

For inorganic aqueous process solutions (e.g., sulfuric acid, caustic soda, brine), the Baumé scale ( ∘ B e ˊ ^\circ\text{Bé} ∘ B e ˊ ) is utilized: For liquids heavier than water ( S G > 1.0 ) : ∘ B e ˊ = 145 − 145 S G 60 / 60 ∘ F ⟺ S G = 145 145 − ∘ B e ˊ \text{For liquids heavier than water } (SG > 1.0): \quad ^\circ\text{Bé} = 145 - \frac{145}{SG_{60/60^\circ\text{F}}} \iff SG = \frac{145}{145 - ^\circ\text{Bé}} For liquids heavier than water ( SG > 1.0 ) : ∘ B e ˊ = 145 − S G 60/6 0 ∘ F ​ 145 ​ ⟺ SG = 145 − ∘ B e ˊ 145 ​ For liquids lighter than water ( S G < 1.0 ) : ∘ B e ˊ = 140 S G 60 / 60 ∘ F − 130 ⟺ S G = 140 130 + ∘ B e ˊ \text{For liquids lighter than water } (SG < 1.0): \quad ^\circ\text{Bé} = \frac{140}{SG_{60/60^\circ\text{F}}} - 130 \iff SG = \frac{140}{130 + ^\circ\text{Bé}} For liquids lighter than water ( SG < 1.0 ) : ∘ B e ˊ = S G 60/6 0 ∘ F ​ 140 ​ − 130 ⟺ SG = 130 + ∘ B e ˊ 140 ​

Saturated Liquid Density: The Rackett Equation

For saturated pure liquids, the Rackett equation provides high-precision estimates of molar volume from the triple point up to reduced temperatures of T r ≈ 0.95 T_r \approx 0.95 T r ​ ≈ 0.95 : V sat = R T c P c Z R A [ 1 + ( 1 − T r ) 2 / 7 ] V_{\text{sat}} = \frac{R T_c}{P_c} Z_{RA}^{\left[ 1 + (1 - T_r)^{2/7} \right]} V sat ​ = P c ​ R T c ​ ​ Z R A [ 1 + ( 1 − T r ​ ) 2/7 ] ​

Where:

V sat V_{\text{sat}} V sat ​ = saturated liquid molar volume ( m 3 / kmol \text{m}^3/\text{kmol} m 3 / kmol or cm 3 / mol \text{cm}^3/\text{mol} cm 3 / mol ).

T c , P c T_c, P_c T c ​ , P c ​ = critical temperature ( K \text{K} K ) and critical pressure ( kPa \text{kPa} kPa or bar \text{bar} bar ).

T r = T / T c T_r = T / T_c T r ​ = T / T c ​ = reduced temperature.

Z R A Z_{RA} Z R A ​ = pure-component Rackett compressibility parameter (tabulated in the NCEES PE Chemical Reference Handbook; if unavailable, approximate with critical compressibility factor Z c = P c V c / ( R T c ) Z_c = P_c V_c / (R T_c) Z c ​ = P c ​ V c ​ / ( R T c ​ ) ).

R R R = universal gas constant ( 8.3145 kPa ⋅ m 3 / ( kmol ⋅ K ) 8.3145\text{ kPa}\cdot\text{m}^3/(\text{kmol}\cdot\text{K}) 8.3145 kPa ⋅ m 3 / ( kmol ⋅ K ) ).

The saturated liquid mass density is calculated directly from the molar volume: ρ sat = M V sat \rho_{\text{sat}} = \frac{M}{V_{\text{sat}}} ρ sat ​ = V sat ​ M ​

Ideal and Real Gas Density

Gas density is calculated using the equation of state: ρ gas = P M Z R T \rho_{\text{gas}} = \frac{P M}{Z R T} ρ gas ​ = ZRT PM ​

Where Z Z Z is the compressibility factor ( Z = 1.0 Z = 1.0 Z = 1.0 for ideal gases). For real gases at elevated pressures, Z Z Z is obtained from generalized compressibility charts using reduced properties ( T r = T / T c , P r = P / P c T_r = T/T_c, P_r = P/P_c T r ​ = T / T c ​ , P r ​ = P / P c ​ ) or cubic equations of state (Peng-Robinson, SRK).

  • 2. Viscosity Fundamentals: Dynamic vs. Kinematic
  • Newton's Law of Viscosity

Viscosity quantifies internal resistance to shear-induced deformation. In laminar parallel flow, shear stress ( τ \tau τ ) is directly proportional to the velocity gradient (shear rate γ ˙ \dot{\gamma} γ ˙ ​ ): τ y x = − μ d v x d y = μ γ ˙ \tau_{yx} = -\mu \frac{dv_x}{dy} = \mu \dot{\gamma} τ y x ​ = − μ d y d v x ​ ​ = μ γ ˙ ​

Where:

τ y x \tau_{yx} τ y x ​ = shear stress parallel to the x x x -plane ( N/m 2 \text{N/m}^2 N/m 2 or Pa \text{Pa} Pa , lbf/ft 2 \text{lbf/ft}^2 lbf/ft 2 ).

γ ˙ = ∣ d v x / d y ∣ \dot{\gamma} = |dv_x/dy| γ ˙ ​ = ∣ d v x ​ / d y ∣ = shear rate ( s − 1 \text{s}^{-1} s − 1 ).

  • μ \mu μ = dynamic (absolute) viscosity . Moving Plate (Area A, Velocity V) ------> Force F
  • ===================================================
  • Fluid Layer: Velocity Gradient dv/dy (Shear Rate)
  • --------------------------------------------------
  • Stationary Plate (v = 0)
  • ===================================================
  • Shear Stress: tau = F / A = mu * (dv/dy)
  • Dynamic Viscosity Units and Conversions

SI Unit: Pa ⋅ s = kg / ( m ⋅ s ) = N ⋅ s/m 2 \text{Pa}\cdot\text{s} = \text{kg}/(\text{m}\cdot\text{s}) = \text{N}\cdot\text{s/m}^2 Pa ⋅ s = kg / ( m ⋅ s ) = N ⋅ s/m 2 .

CGS Unit: Poise (P) = g / ( cm ⋅ s ) = 0.10 Pa ⋅ s \text{Poise (P)} = \text{g}/(\text{cm}\cdot\text{s}) = 0.10\text{ Pa}\cdot\text{s} Poise (P) = g / ( cm ⋅ s ) = 0.10 Pa ⋅ s . The industrial sub-unit is the centipoise (cP) : 1.0 cP = 10 − 2 P = 10 − 3 Pa ⋅ s = 1.0 mPa ⋅ s 1.0\text{ cP} = 10^{-2}\text{ P} = 10^{-3}\text{ Pa}\cdot\text{s} = 1.0\text{ mPa}\cdot\text{s} 1.0 cP = 1 0 − 2 P = 1 0 − 3 Pa ⋅ s = 1.0 mPa ⋅ s (Convenient reference: Liquid water at 20.0 ∘ C 20.0^\circ\text{C} 20. 0 ∘ C has μ = 1.002 cP ≈ 1.0 cP \mu = 1.002\text{ cP} \approx 1.0\text{ cP} μ = 1.002 cP ≈ 1.0 cP ).

US Customary Units: lbm / ( ft ⋅ s ) \text{lbm}/(\text{ft}\cdot\text{s}) lbm / ( ft ⋅ s ) , lbm / ( ft ⋅ hr ) \text{lbm}/(\text{ft}\cdot\text{hr}) lbm / ( ft ⋅ hr ) , and lbf ⋅ s/ft 2 \text{lbf}\cdot\text{s/ft}^2 lbf ⋅ s/ft 2 : 1.0 cP = 6.7197 × 10 − 4 lbm / ( ft ⋅ s ) = 2.4191 lbm / ( ft ⋅ hr ) = 2.0885 × 10 − 5 lbf ⋅ s/ft 2 1.0\text{ cP} = 6.7197 \times 10^{-4}\text{ lbm}/(\text{ft}\cdot\text{s}) = 2.4191\text{ lbm}/(\text{ft}\cdot\text{hr}) = 2.0885 \times 10^{-5}\text{ lbf}\cdot\text{s/ft}^2 1.0 cP = 6.7197 × 1 0 − 4 lbm / ( ft ⋅ s ) = 2.4191 lbm / ( ft ⋅ hr ) = 2.0885 × 1 0 − 5 lbf ⋅ s/ft 2

Kinematic Viscosity ( ν \nu ν )

Kinematic viscosity is the ratio of dynamic viscosity to fluid density, representing the momentum diffusivity of the fluid: ν ≡ μ ρ \nu \equiv \frac{\mu}{\rho} ν ≡ ρ μ ​

SI Unit: m 2 / s \text{m}^2/\text{s} m 2 / s .

CGS Unit: Stokes (St) = cm 2 / s = 10 − 4 m 2 / s \text{Stokes (St)} = \text{cm}^2/\text{s} = 10^{-4}\text{ m}^2/\text{s} Stokes (St) = cm 2 / s = 1 0 − 4 m 2 / s . The standard sub-unit is the centistokes (cSt) : 1.0 cSt = 10 − 2 St = 10 − 6 m 2 / s = 1.0 mm 2 / s 1.0\text{ cSt} = 10^{-2}\text{ St} = 10^{-6}\text{ m}^2/\text{s} = 1.0\text{ mm}^2/\text{s} 1.0 cSt = 1 0 − 2 St = 1 0 − 6 m 2 / s = 1.0 mm 2 / s (Reference: Pure water at 20.0 ∘ C 20.0^\circ\text{C} 20. 0 ∘ C has ν = 1.002 / 0.9982 ≈ 1.004 cSt \nu = 1.002 / 0.9982 \approx 1.004\text{ cSt} ν = 1.002/0.9982 ≈ 1.004 cSt ).

US Customary Unit: ft 2 / s \text{ft}^2/\text{s} ft 2 / s : 1.0 cSt = 1.0764 × 10 − 5 ft 2 / s 1.0\text{ cSt} = 1.0764 \times 10^{-5}\text{ ft}^2/\text{s} 1.0 cSt = 1.0764 × 1 0 − 5 ft 2 / s

Saybolt Universal Seconds (SUS): In older petroleum specifications, efflux time from a calibrated Saybolt viscometer is reported in SUS ( t t t in seconds at 100 ∘ F 100^\circ\text{F} 10 0 ∘ F or 210 ∘ F 210^\circ\text{F} 21 0 ∘ F ): ν (cSt) = 0.226 t − 195 t ( for 32 ≤ t ≤ 100 SUS ) \nu\text{ (cSt)} = 0.226 t - \frac{195}{t} \quad (\text{for } 32 \le t \le 100\text{ SUS}) ν (cSt) = 0.226 t − t 195 ​ ( for 32 ≤ t ≤ 100 SUS ) ν (cSt) = 0.220 t − 135 t ≈ 0.216 t ( for t > 100 SUS ) \nu\text{ (cSt)} = 0.220 t - \frac{135}{t} \approx 0.216 t \quad (\text{for } t > 100\text{ SUS}) ν (cSt) = 0.220 t − t 135 ​ ≈ 0.216 t ( for t > 100 SUS )

  • 3. Rheological Classifications: Newtonian vs. Non-Newtonian Fluids
  • Fluids are classified by how their shear stress responds to imposed shear rate: Shear Stress (tau)
  • ^
  • | / Dilatant (Shear-Thickening, n > 1)
  • | /
  • | / / Newtonian (n = 1, Constant mu)
  • | / /
  • | / / / Pseudoplastic (Shear-Thinning, n < 1)
  • | / / /
  • | / / /
  • tau0 +-----+--------+---------- Bingham Plastic (Yield Stress tau0)
  • | / / /
  • |/ / /
  • +-----------------------------------> Shear Rate (gamma_dot)
  • 1. Newtonian Fluids

Newtonian fluids have a constant dynamic viscosity independent of shear rate or duration of shear. Examples include water, air, light hydrocarbons, simple alcohols, and benzene.

2. Ostwald-de Waele Power Law Model

For non-Newtonian fluids lacking yield stress, the power law model relates shear stress to shear rate: τ = K γ ˙ n \tau = K \dot{\gamma}^n τ = K γ ˙ ​ n

Where:

K K K = flow consistency index ( Pa ⋅ s n \text{Pa}\cdot\text{s}^n Pa ⋅ s n or lbf ⋅ s n / ft 2 \text{lbf}\cdot\text{s}^n/\text{ft}^2 lbf ⋅ s n / ft 2 ).

n n n = flow behavior index (dimensionless).

The apparent viscosity ( μ app \mu_{\text{app}} μ app ​ ) is the effective viscosity at a specific local shear rate: μ app = τ γ ˙ = K γ ˙ n − 1 \mu_{\text{app}} = \frac{\tau}{\dot{\gamma}} = K \dot{\gamma}^{n-1} μ app ​ = γ ˙ ​ τ ​ = K γ ˙ ​ n − 1

Pseudoplastic (Shear-Thinning, n < 1 n < 1 n < 1 ): Apparent viscosity decreases as shear rate increases. Molecular entanglements uncoil and align parallel to the flow streamlines. Examples: polymer melts, latex paint, fermentation broths, blood, paper pulp.

Dilatant (Shear-Thickening, n > 1 n > 1 n > 1 ): Apparent viscosity increases as shear rate increases. High shear disrupts the packing of concentrated suspensions, forcing fluid into void spaces and increasing solid-solid interparticle friction. Examples: concentrated cornstarch suspensions (oobleck), wet beach sand, high-solids titanium dioxide slurries.

3. Bingham Plastics

Bingham plastics behave as rigid solids until an external yield stress ( τ 0 \tau_0 τ 0 ​ ) is exceeded, after which they flow with a constant plastic viscosity ( μ p \mu_p μ p ​ or μ ∞ \mu_\infty μ ∞ ​ ): τ = τ 0 + μ p γ ˙ ( for ∣ τ ∣ > τ 0 ) \tau = \tau_0 + \mu_p \dot{\gamma} \quad (\text{for } |\tau| > \tau_0) τ = τ 0 ​ + μ p ​ γ ˙ ​ ( for ∣ τ ∣ > τ 0 ​ ) γ ˙ = 0 ( for ∣ τ ∣ ≤ τ 0 ) \dot{\gamma} = 0 \quad (\text{for } |\tau| \le \tau_0) γ ˙ ​ = 0 ( for ∣ τ ∣ ≤ τ 0 ​ )

Examples include drilling muds, sewage sludge, toothpastes, greases, and mayonnaise.

4. Time-Dependent Rheology

Thixotropic: Apparent viscosity decreases reversibly over time under constant, sustained shear rate (e.g., non-drip paints, drilling muds after standing).

Rheopectic: Apparent viscosity increases reversibly over time under constant, sustained shear rate (e.g., gypsum slurries, bentonite clay pastes).

  • 4. Temperature and Pressure Dependencies of Viscosity
  • Liquid Viscosity vs. Temperature: The Andrade / Arrhenius Equation

In liquids, molecules are closely packed in mutual potential energy wells. Momentum transfer occurs via short-range attractive intermolecular forces and molecular cage jumps into adjacent voids (free volume). Rising temperature increases thermal expansion, expanding intermolecular distances and providing thermal activation energy to overcome attractive cages. Consequently, liquid viscosity decreases exponentially with increasing temperature : ln ⁡ ( μ L ) = A + B T ⟺ μ L ( T ) = A ′ exp ⁡ ( E a R T ) \ln(\mu_L) = A + \frac{B}{T} \iff \mu_L(T) = A' \exp\left( \frac{E_a}{R T} \right) ln ( μ L ​ ) = A + T B ​ ⟺ μ L ​ ( T ) = A ′ exp ( RT E a ​ ​ )

Where T T T is absolute temperature ( K \text{K} K or ∘ R ^\circ\text{R} ∘ R ) and E a E_a E a ​ is the activation energy for viscous flow. For broad temperature spans, the three-parameter Vogel-Fulcher-Tammann (VFT) correlation is applied: ln ⁡ ( μ L ) = A + B T − T 0 \ln(\mu_L) = A + \frac{B}{T - T_0} ln ( μ L ​ ) = A + T − T 0 ​ B ​

Gas Viscosity vs. Temperature: Kinetic Theory & Sutherland's Law

In low-pressure gases, molecules are separated by distances much greater than their molecular diameters. Intermolecular attractive forces are negligible. Momentum transport occurs exclusively by the physical translation of gas molecules carrying momentum across parallel flow streamlines through collisions. Kinetic theory shows that the mean molecular thermal velocity is: v ˉ = 8 R T π M ∝ T \bar{v} = \sqrt{\frac{8 R T}{\pi M}} \propto \sqrt{T} v ˉ = π M 8 RT ​ ​ ∝ T ​

Because hotter gas molecules travel faster and collide more frequently, gas viscosity increases with increasing temperature : μ G ∝ M T \mu_G \propto \sqrt{M T} μ G ​ ∝ MT ​

According to Chapman-Enskog kinetic theory for dilute gases: μ G = 2.6693 × 10 − 5 M T σ 2 Ω v ( poise ) \mu_G = 2.6693 \times 10^{-5} \frac{\sqrt{M T}}{\sigma^2 \Omega_v} \quad (\text{poise}) μ G ​ = 2.6693 × 1 0 − 5 σ 2 Ω v ​ MT ​ ​ ( poise )

Where σ \sigma σ is the collision diameter ( A ˚ \text{Å} A ˚ ) and Ω v \Omega_v Ω v ​ is the dimensionless collision integral (which varies weakly with k B T / ϵ k_B T / \epsilon k B ​ T / ϵ ).

For engineering calculations across wide temperature ranges, Sutherland's formula incorporates intermolecular attractions via an empirical Sutherland constant ( S S S in K \text{K} K ): μ G ( T ) = μ 0 ( T T 0 ) 3 / 2 T 0 + S T + S \mu_G(T) = \mu_0 \left( \frac{T}{T_0} \right)^{3/2} \frac{T_0 + S}{T + S} μ G ​ ( T ) = μ 0 ​ ( T 0 ​ T ​ ) 3/2 T + S T 0 ​ + S ​

Pressure Dependence of Viscosity

Liquids: Because liquids are virtually incompressible, viscosity is nearly independent of pressure from vacuum up to 20 − 50 bar 20-50\text{ bar} 20 − 50 bar . At extreme pressures ( > 100 − 1000 bar > 100-1000\text{ bar} > 100 − 1000 bar ), free volume is compressed, causing viscosity to increase exponentially.

Gases: At low to moderate pressures ( P < 10 bar P < 10\text{ bar} P < 10 bar ), gas viscosity is independent of pressure (as predicted by Maxwell, because gas density increases linearly while molecular mean free path decreases proportionally, cancelling out). At high pressures ( P r > 1 P_r > 1 P r ​ > 1 ), dense gases and supercritical fluids experience molecular clustering, causing viscosity to increase sharply toward liquid-like magnitudes.

5. Summary Comparison Table: Density and Viscosity Principles

Property / Parameter Liquid Phase Gas Phase (Low to Moderate P P P ) Dense / Supercritical Fluid

Density (ρ) 500 − 1500 kg/m 3 500 - 1500\text{ kg/m}^3 500 − 1500 kg/m 3 ; modeled via Rackett eq. 0.5 − 5 kg/m 3 0.5 - 5\text{ kg/m}^3 0.5 − 5 kg/m 3 ; ρ = P M / ( Z R T ) \rho = P M / (Z R T) ρ = PM / ( ZRT ) 100 − 800 kg/m 3 100 - 800\text{ kg/m}^3 100 − 800 kg/m 3 ; cubic EOS / departure functions

Effect of Temperature on ρ Decreases moderately with T T T Decreases inversely with T T T ( ρ ∝ 1 / T \rho \propto 1/T ρ ∝ 1/ T ) Decreases sharply near critical point

Effect of Pressure on ρ Nearly incompressible ( d ρ / d P ≈ 0 d\rho/dP \approx 0 d ρ / d P ≈ 0 ) Increases linearly with P P P ( ρ ∝ P \rho \propto P ρ ∝ P ) Highly compressible ( Z ≪ 1 Z \ll 1 Z ≪ 1 )

Dynamic Viscosity (μ) 0.2 − 1000 + cP 0.2 - 1000+\text{ cP} 0.2 − 1000 + cP 0.01 − 0.03 cP 0.01 - 0.03\text{ cP} 0.01 − 0.03 cP ( 10 − 30 μ Pa ⋅ s 10 - 30\;\mu\text{Pa}\cdot\text{s} 10 − 30 μ Pa ⋅ s ) 0.05 − 0.2 cP 0.05 - 0.2\text{ cP} 0.05 − 0.2 cP

Effect of Temperature on μ Decreases exponentially ( ln ⁡ μ = A + B / T \ln \mu = A + B/T ln μ = A + B / T ) Increases ( μ ∝ T 1 / 2 \mu \propto T^{1/2} μ ∝ T 1/2 or Sutherland) Increases at low P r P_r P r ​ , decreases at high P r P_r P r ​

Effect of Pressure on μ Negligible up to ≈ 50 bar \approx 50\text{ bar} ≈ 50 bar Negligible up to ≈ 10 bar \approx 10\text{ bar} ≈ 10 bar Increases significantly with P P P

Primary Mechanism Intermolecular cohesive cage jumping Intermolecular ballistic momentum exchange Combined collisional & dense fluid clustering

  • 6. Comprehensive Worked Numerical Example
  • Problem Statement

A chemical facility processes an organic process stream and a drilling mud slurry. Solve the following three engineering evaluations:

Crude Fraction Characterization: A petroleum condensate has an API gravity of 32.0 ∘ API 32.0^\circ\text{API} 32. 0 ∘ API at 60.0 ∘ F 60.0^\circ\text{F} 60. 0 ∘ F . Determine its specific gravity S G 60 / 60 ∘ F SG_{60/60^\circ\text{F}} S G 60/6 0 ∘ F ​ , mass density ρ \rho ρ in lbm/ft 3 \text{lbm/ft}^3 lbm/ft 3 , and mass flow rate m ˙ \dot{m} m ˙ in lbm/hr \text{lbm/hr} lbm/hr for a pipeline transporting 500.0 gpm 500.0\text{ gpm} 500.0 gpm .

Rackett Saturated Liquid Density: Saturated liquid isobutane ( M = 58.12 kg/kmol M = 58.12\text{ kg/kmol} M = 58.12 kg/kmol ) is stored at 300.0 K 300.0\text{ K} 300.0 K . Given T c = 407.8 K T_c = 407.8\text{ K} T c ​ = 407.8 K , P c = 3640 kPa P_c = 3640\text{ kPa} P c ​ = 3640 kPa , and Z R A = 0.2829 Z_{RA} = 0.2829 Z R A ​ = 0.2829 , calculate the saturated molar volume V sat V_{\text{sat}} V sat ​ in m 3 / kmol \text{m}^3/\text{kmol} m 3 / kmol and mass density ρ sat \rho_{\text{sat}} ρ sat ​ in kg/m 3 \text{kg/m}^3 kg/m 3 .

Power-Law Slurry Flow: A shear-thinning mineral slurry flows through a D = 0.100 m D = 0.100\text{ m} D = 0.100 m ID pipe at an average velocity of V avg = 1.50 m/s V_{\text{avg}} = 1.50\text{ m/s} V avg ​ = 1.50 m/s . The slurry obeys the Ostwald-de Waele model with K = 0.800 Pa ⋅ s n K = 0.800\text{ Pa}\cdot\text{s}^n K = 0.800 Pa ⋅ s n and n = 0.600 n = 0.600 n = 0.600 . Determine the wall shear rate γ ˙ w \dot{\gamma}_w γ ˙ ​ w ​ , wall shear stress τ w \tau_w τ w ​ , and apparent viscosity μ app , w \mu_{\text{app},w} μ app , w ​ at the pipe wall in cP \text{cP} cP .

Step 1: Petroleum Condensate Characterization

From the API gravity definition: S G 60 / 60 ∘ F = 141.5 ∘ API + 131.5 = 141.5 32.0 + 131.5 = 141.5 163.5 = 0.86544 SG_{60/60^\circ\text{F}} = \frac{141.5}{^\circ\text{API} + 131.5} = \frac{141.5}{32.0 + 131.5} = \frac{141.5}{163.5} = \mathbf{0.86544} S G 60/6 0 ∘ F ​ = ∘ API + 131.5 141.5 ​ = 32.0 + 131.5 141.5 ​ = 163.5 141.5 ​ = 0.86544

Mass density at 60 ∘ F 60^\circ\text{F} 6 0 ∘ F : ρ = S G × ρ water ( 60 ∘ F ) = 0.86544 × 62.366 lbm/ft 3 = 53.974 lbm/ft 3 \rho = SG \times \rho_{\text{water}}(60^\circ\text{F}) = 0.86544 \times 62.366\text{ lbm/ft}^3 = \mathbf{53.974\text{ lbm/ft}^3} ρ = SG × ρ water ​ ( 6 0 ∘ F ) = 0.86544 × 62.366 lbm/ft 3 = 53.974 lbm/ft 3

Volumetric flow rate conversion ( 1 ft 3 = 7.4805 gal 1\text{ ft}^3 = 7.4805\text{ gal} 1 ft 3 = 7.4805 gal ): Q = 500.0 gpm × 1 ft 3 / s 448.83 gpm = 1.1140 ft 3 / s = 66.840 ft 3 / min Q = 500.0\text{ gpm} \times \frac{1\text{ ft}^3/\text{s}}{448.83\text{ gpm}} = 1.1140\text{ ft}^3/\text{s} = 66.840\text{ ft}^3/\text{min} Q = 500.0 gpm × 448.83 gpm 1 ft 3 / s ​ = 1.1140 ft 3 / s = 66.840 ft 3 / min m ˙ = Q ⋅ ρ = ( 1.1140 ft 3 / s ) × ( 53.974 lbm/ft 3 ) × 3600 s/hr = 2.1645 × 10 5 lbm/hr \dot{m} = Q \cdot \rho = (1.1140\text{ ft}^3/\text{s}) \times (53.974\text{ lbm/ft}^3) \times 3600\text{ s/hr} = \mathbf{2.1645 \times 10^5\text{ lbm/hr}} m ˙ = Q ⋅ ρ = ( 1.1140 ft 3 / s ) × ( 53.974 lbm/ft 3 ) × 3600 s/hr = 2.1645 × 1 0 5 lbm/hr

Step 2: Saturated Isobutane via Rackett Equation

Compute reduced temperature: T r = T T c = 300.0 K 407.8 K = 0.73565 T_r = \frac{T}{T_c} = \frac{300.0\text{ K}}{407.8\text{ K}} = 0.73565 T r ​ = T c ​ T ​ = 407.8 K 300.0 K ​ = 0.73565 1 − T r = 1 − 0.73565 = 0.26435 1 - T_r = 1 - 0.73565 = 0.26435 1 − T r ​ = 1 − 0.73565 = 0.26435

Evaluate the exponent bracket: ( 1 − T r ) 2 / 7 = ( 0.26435 ) 0.285714 = 0.68377 (1 - T_r)^{2/7} = (0.26435)^{0.285714} = 0.68377 ( 1 − T r ​ ) 2/7 = ( 0.26435 ) 0.285714 = 0.68377 Exponent = 1 + ( 1 − T r ) 2 / 7 = 1 + 0.68377 = 1.68377 \text{Exponent} = 1 + (1 - T_r)^{2/7} = 1 + 0.68377 = 1.68377 Exponent = 1 + ( 1 − T r ​ ) 2/7 = 1 + 0.68377 = 1.68377

Evaluate Z R A Exponent Z_{RA}^{\text{Exponent}} Z R A Exponent ​ : Z R A 1.68377 = ( 0.2829 ) 1.68377 = exp ⁡ ( 1.68377 × ln ⁡ ( 0.2829 ) ) = exp ⁡ ( 1.68377 × ( − 1.26267 ) ) = exp ⁡ ( − 2.12604 ) = 0.11931 Z_{RA}^{1.68377} = (0.2829)^{1.68377} = \exp(1.68377 \times \ln(0.2829)) = \exp(1.68377 \times (-1.26267)) = \exp(-2.12604) = 0.11931 Z R A 1.68377 ​ = ( 0.2829 ) 1.68377 = exp ( 1.68377 × ln ( 0.2829 )) = exp ( 1.68377 × ( − 1.26267 )) = exp ( − 2.12604 ) = 0.11931

Calculate critical molar volume ratio: R T c P c = ( 8.3145 kPa ⋅ m 3 / ( kmol ⋅ K ) ) × ( 407.8 K ) 3640 kPa = 3390.65 3640 = 0.93150 m 3 / kmol \frac{R T_c}{P_c} = \frac{(8.3145\text{ kPa}\cdot\text{m}^3/(\text{kmol}\cdot\text{K})) \times (407.8\text{ K})}{3640\text{ kPa}} = \frac{3390.65}{3640} = 0.93150\text{ m}^3/\text{kmol} P c ​ R T c ​ ​ = 3640 kPa ( 8.3145 kPa ⋅ m 3 / ( kmol ⋅ K )) × ( 407.8 K ) ​ = 3640 3390.65 ​ = 0.93150 m 3 / kmol

Compute saturated molar volume and mass density: V sat = 0.93150 × 0.11931 = 0.11114 m 3 / kmol = 111.14 cm 3 / mol V_{\text{sat}} = 0.93150 \times 0.11931 = \mathbf{0.11114\text{ m}^3/\text{kmol}} = 111.14\text{ cm}^3/\text{mol} V sat ​ = 0.93150 × 0.11931 = 0.11114 m 3 / kmol = 111.14 cm 3 / mol ρ sat = M V sat = 58.12 kg/kmol 0.11114 m 3 / kmol = 522.9 kg/m 3 \rho_{\text{sat}} = \frac{M}{V_{\text{sat}}} = \frac{58.12\text{ kg/kmol}}{0.11114\text{ m}^3/\text{kmol}} = \mathbf{522.9\text{ kg/m}^3} ρ sat ​ = V sat ​ M ​ = 0.11114 m 3 / kmol 58.12 kg/kmol ​ = 522.9 kg/m 3

Step 3: Non-Newtonian Slurry Pipe Hydraulics

For fully developed laminar pipe flow of a power-law fluid, the wall shear rate is given by the Rabinowitsch-Mooney equation: γ ˙ w = ( 3 n + 1 4 n ) ( 8 V avg D ) \dot{\gamma}_w = \left( \frac{3n + 1}{4n} \right) \left( \frac{8 V_{\text{avg}}}{D} \right) γ ˙ ​ w ​ = ( 4 n 3 n + 1 ​ ) ( D 8 V avg ​ ​ ) 3 n + 1 4 n = 3 ( 0.600 ) + 1 4 ( 0.600 ) = 2.800 2.400 = 1.1667 \frac{3n + 1}{4n} = \frac{3(0.600) + 1}{4(0.600)} = \frac{2.800}{2.400} = 1.1667 4 n 3 n + 1 ​ = 4 ( 0.600 ) 3 ( 0.600 ) + 1 ​ = 2.400 2.800 ​ = 1.1667 8 V avg D = 8 × 1.50 m/s 0.100 m = 120.0 s − 1 \frac{8 V_{\text{avg}}}{D} = \frac{8 \times 1.50\text{ m/s}}{0.100\text{ m}} = 120.0\text{ s}^{-1} D 8 V avg ​ ​ = 0.100 m 8 × 1.50 m/s ​ = 120.0 s − 1 γ ˙ w = 1.1667 × 120.0 s − 1 = 140.0 s − 1 \dot{\gamma}_w = 1.1667 \times 120.0\text{ s}^{-1} = \mathbf{140.0\text{ s}^{-1}} γ ˙ ​ w ​ = 1.1667 × 120.0 s − 1 = 140.0 s − 1

Compute wall shear stress: τ w = K ( γ ˙ w ) n = 0.800 × ( 140.0 ) 0.600 = 0.800 × 19.394 = 15.515 Pa \tau_w = K (\dot{\gamma}_w)^n = 0.800 \times (140.0)^{0.600} = 0.800 \times 19.394 = \mathbf{15.515\text{ Pa}} τ w ​ = K ( γ ˙ ​ w ​ ) n = 0.800 × ( 140.0 ) 0.600 = 0.800 × 19.394 = 15.515 Pa

Compute apparent viscosity at the pipe wall: μ app , w = τ w γ ˙ w = 15.515 Pa 140.0 s − 1 = 0.11082 Pa ⋅ s = 110.8 cP \mu_{\text{app},w} = \frac{\tau_w}{\dot{\gamma}_w} = \frac{15.515\text{ Pa}}{140.0\text{ s}^{-1}} = 0.11082\text{ Pa}\cdot\text{s} = \mathbf{110.8\text{ cP}} μ app , w ​ = γ ˙ ​ w ​ τ w ​ ​ = 140.0 s − 1 15.515 Pa ​ = 0.11082 Pa ⋅ s = 110.8 cP

(Notice that without shear, the fluid would be much thicker; at γ ˙ = 1.0 s − 1 \dot{\gamma} = 1.0\text{ s}^{-1} γ ˙ ​ = 1.0 s − 1 , μ app = 0.800 Pa ⋅ s = 800 cP \mu_{\text{app}} = 0.800\text{ Pa}\cdot\text{s} = 800\text{ cP} μ app ​ = 0.800 Pa ⋅ s = 800 cP . Shearing reduces viscosity by over 86 % 86\% 86% ).

7. Critical PE Exam Traps & Pitfalls

  • Warning
  • Trap 1: Gas Viscosity vs. Liquid Viscosity Temperature Trends

The most heavily tested conceptual trap on the PE Chemical exam is the opposite effect of temperature on gas versus liquid viscosity. When temperature rises, liquid viscosity decreases (cohesion drops), but gas viscosity increases (molecular collisions increase). Applying ln ⁡ μ = A + B / T \ln \mu = A + B/T ln μ = A + B / T to a gas or assuming gas viscosity drops with heat leads to immediate error.

  • Warning
  • Trap 2: Dynamic vs. Kinematic Viscosity Units

Converting centipoise directly to centistokes without dividing by density is a major error source: ν (cSt) = μ (cP) / S G \nu\text{ (cSt)} = \mu\text{ (cP)} / SG ν (cSt) = μ (cP) / SG . If an oil has μ = 20 cP \mu = 20\text{ cP} μ = 20 cP and S G = 0.80 SG = 0.80 SG = 0.80 , ν = 20 / 0.80 = 25 cSt \nu = 20 / 0.80 = 25\text{ cSt} ν = 20/0.80 = 25 cSt , NOT 20 cSt 20\text{ cSt} 20 cSt . In English units, remember that 1 cP = 6.7197 × 10 − 4 lbm / ( ft ⋅ s ) 1\text{ cP} = 6.7197 \times 10^{-4}\text{ lbm}/(\text{ft}\cdot\text{s}) 1 cP = 6.7197 × 1 0 − 4 lbm / ( ft ⋅ s ) , while kinematic viscosity is in ft 2 / s \text{ft}^2/\text{s} ft 2 / s .

  • Warning
  • Trap 3: Inverting the API Gravity Equation

Because ∘ API ^\circ\text{API} ∘ API is inversely related to specific gravity, higher ∘ API ^\circ\text{API} ∘ API means lighter crude. Candidates sometimes erroneously associate high API gravity with heavy, viscous oils. Pure water has an API gravity of 10.0 ∘ API 10.0^\circ\text{API} 10. 0 ∘ API ; crudes that float on water always have ∘ API > 10.0 ^\circ\text{API} > 10.0 ∘ API > 10.0 .