Study guide

About the PE Chemical Exam

PE Chemical Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the PE Chemical Exam How to Use This Guide and the NCEES Handbook

2 Chapter 1: Material Balances & Flowsheet Calculations

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting 1.2 Steady-State Material Balances (Reactive & Non-Reactive Systems) 1.3 Recycle, Bypass, and Purge Operations

3 Chapter 2: Energy Balances & Thermochemistry

2.1 Enthalpy Accounting, Sensible Heat, and Phase Changes 2.2 Heats of Reaction, Formation, and Adiabatic Flame Temperatures 2.3 Unsteady-State Mass and Energy Balances

4 Chapter 3: Fluid Statics & Incompressible Pipe Flow

3.1 Fluid Statics, Pressure Measurement, and Manometry 3.2 Incompressible Flow, Friction Factors, and the Moody Diagram 3.3 Minor Losses, Equivalent Length, and Piping Networks 3.4 Pumps, Compressors, and NPSH Calculations

5 Chapter 4: Advanced Fluid Dynamics & Compressible Flow

4.1 Compressible Gas Flow, Sonic Velocity, and Choked Flow 4.2 Flow Measurement Devices (Orifices, Venturis, Rotameters) 4.3 Multiphase Flow and Fluidization Principles 4.4 Mixing, Agitation, and Agitator Scale-Up

6 Chapter 5: Thermodynamic Laws & Fundamental Relations

5.1 First and Second Laws, Heat Engines, and Carnot Efficiency 5.2 Entropy, Availability, and Exergy Analysis 5.3 Fundamental Property Relations and Maxwell Equations

7 Chapter 6: Real Gases & Equations of State

6.1 Volumetric Properties and Compressibility Factor Charts 6.2 Cubic Equations of State (vdW, RK, SRK, and Peng-Robinson) 6.3 Residual Properties and Enthalpy/Entropy Departure Functions

8 Chapter 7: Phase & Chemical Reaction Equilibria

7.1 Pure Component Vapor Pressure and Phase Equilibria 7.2 Vapor-Liquid Equilibrium (VLE), Raoult's Law, and Activity Coefficients 7.3 Chemical Reaction Equilibria and Equilibrium Constant Calculation

9 Chapter 8: Heat Transfer Mechanisms & Conduction

8.1 Steady-State Conduction in Planar, Cylindrical, and Spherical Geometries 8.2 Convective Heat Transfer and Dimensionless Correlations 8.3 Thermal Radiation, Emissivity, and Surface Radiation Exchange

10 Chapter 9: Heat Exchanger Design & Phase Change

9.1 Shell-and-Tube Exchanger Design, TEMA Standards, and LMTD 9.2 Effectiveness-NTU Method and Exchanger Rating 9.3 Boiling Regimes, Condensation Phenomena, and Fouling Resistances

11 Chapter 10: Mass Transfer Fundamentals & Diffusion

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion 10.2 Convective Mass Transfer and Film Theories 10.3 Mass Transfer Dimensionless Numbers (Sherwood, Schmidt, Peclet)

12 Chapter 11: Distillation Operations

11.1 Vapor-Liquid Equilibrium and Relative Volatility in Distillation 11.2 McCabe-Thiele Method for Binary Distillation 11.3 Packed vs Tray Columns, Flooding, and Tray Hydraulics 11.4 Multicomponent Distillation Fundamentals and Key Components

13 Chapter 12: Rate-Controlled & Equilibrium Separations

12.1 Gas Absorption, Stripping, and the Kremser Equation 12.2 Liquid-Liquid Extraction and Ternary Phase Equilibria 12.3 Adsorption, Membrane Separations, and Drying Operations 12.4 Filtration, Crystallization, and Solid-Fluid Separations

14 Chapter 13: Chemical Kinetics & Ideal Isothermal Reactors

13.1 Reaction Rates, Rate Laws, and Order of Reaction 13.2 Temperature Dependence and the Arrhenius Equation 13.3 Batch Reactors and Continuous Stirred-Tank Reactors (CSTR) 13.4 Plug Flow Reactors (PFR) and Reactor Combinations

15 Chapter 14: Non-Ideal Flow, Non-Isothermal Reactors & Catalysis

14.1 Yield, Selectivity, and Multiple Reactions (Series and Parallel) 14.2 Non-Isothermal Reactor Design and Thermal Runaway 14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

16 Chapter 15: Physical & Transport Properties of Fluids

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations 15.2 Thermal Conductivity and Specific Heat Capacities 15.3 Estimation Methods and Corresponding States Principles

17 Chapter 16: Materials of Construction & Corrosion

16.1 Mechanical Properties and Materials Selection in Chemical Plants 16.2 Corrosion Mechanisms, Materials Degradation, and Prevention

18 Chapter 17: Process Safety & Pressure Relief Systems

17.1 Hazard Identification Methodologies (HAZOP, FMEA, What-If) 17.2 Pressure Relief Valve (PRV) and Rupture Disk Sizing 17.3 Flammability, Explosions, and Toxic Dispersion Limits 17.4 Inerting, Purging, Discharge Location, and Containment

19 Chapter 18: Process Control & Engineering Economics

18.1 Process Dynamics and Feedback Control Loops 18.2 PID Controller Tuning and Loop Stability 18.3 Chemical Plant Capital Cost Estimation and Profitability Analysis 18.4 Field Instrumentation, Control Valves, Alarms, and Safety Instrumented Systems

20 Chapter 19: Process Design, Equipment Selection & Environmental Compliance

19.1 Process Flow Diagrams, P&IDs, Scale-Up, and Plant Siting 19.2 Process Equipment Selection, Sizing, and Optimization 19.3 Emissions Evaluation, Mitigation, and Remediation

21 Chapter 20: Plant Operation, Reliability & Continuous Improvement

20.1 Operating Procedures, Startup, and Shutdown 20.2 Mechanical Integrity, Reliability, and Failure Mechanisms 20.3 Debottlenecking, Optimization, and Troubleshooting

About the PE Chemical Exam

Key Takeaways Explain This Topic AI

The NCEES PE Chemical exam contains 80 questions delivered in a 9-hour appointment : a 2-minute nondisclosure agreement, an 8-minute tutorial, 8 hours of exam time , and a 50-minute scheduled break you control.

Eight hours for 80 questions is an average budget of 6 minutes per question , which is the single most important pacing number in your preparation.

The current content outline is the CHEMICAL CBT Exam Specifications effective January 1, 2020 , which allocates questions as Mass/Energy Balances 12-18, Thermodynamics 11-17, Heat Transfer 9-14, Chemical Reaction Engineering 6-10, Fluids 10-16, Mass Transfer 7-11, and Plant Design and Operation 15-23.

Plant Design and Operation is the largest single knowledge area at 15-23 questions , so safety, design, materials, instrumentation, operations, and reliability content is worth more than thermodynamics on this exam.

The exam is closed book with an electronic reference : NCEES supplies the PE Chemical Reference Handbook and all specified design standards on-screen, and these are the only reference materials permitted.

Last updated: September 2026

About the PE Chemical Exam

The Principles and Practice of Engineering (PE) Chemical exam is the discipline-specific licensure exam administered by the National Council of Examiners for Engineering and Surveying (NCEES) . Passing it is the technical gate to becoming a licensed Professional Engineer (PE) in chemical engineering. Before you study a single equation, you should know exactly what the exam is, because almost every bad PE study plan comes from guessing at the format instead of reading the specification.

1. Format and Appointment Structure

The PE Chemical exam is computer-based (CBT) , offered year round at NCEES-approved Pearson VUE test centers. You reserve a single appointment; there is no multi-day structure and no separate morning/afternoon session split.

  • Appointment Component Duration
  • Nondisclosure agreement 2 minutes
  • Tutorial 8 minutes
  • Exam 8 hours
  • Scheduled break 50 minutes
  • Total appointment 9 hours

Two consequences follow immediately:

You work all 80 questions in one 8-hour block. The 50-minute break is scheduled but you decide when to take it. Most candidates split the exam near question 40 and use 25-35 minutes, banking the rest.

Your average budget is 6 minutes per question (480 minutes / 80 questions). This is the number to internalize. A PE Chemical question is not a 20-minute open-ended design problem; it is a 4-to-8-minute applied calculation or judgment call.

The exam uses both the International System of units (SI) and the U.S. Customary System (USCS) . You do not get to pick. Expect to see kg/s \text{kg/s} kg/s and lbm/hr \text{lbm/hr} lbm/hr , kPa \text{kPa} kPa and psig \text{psig} psig , W/(m 2 ⋅ K) \text{W/(m}^2\cdot\text{K)} W/(m 2 ⋅ K) and Btu/(hr ⋅ ft 2 ⋅ ∘ F) \text{Btu/(hr}\cdot\text{ft}^2\cdot^\circ\text{F)} Btu/(hr ⋅ ft 2 ⋅ ∘ F) inside the same exam.

2. The Official Content Outline

The governing document is the NCEES CHEMICAL CBT Exam Specifications, effective January 1, 2020 . It states question counts, not percentages. Learn the counts:

  • # Knowledge Area Questions Share of 80
  • 1 Mass/Energy Balances 12-18 15-23%
  • 2 Thermodynamics 11-17 14-21%
  • 3 Heat Transfer 9-14 11-18%
  • 4 Chemical Reaction Engineering 6-10 8-13%
  • 5 Fluids 10-16 13-20%
  • 6 Mass Transfer 7-11 9-14%
  • 7 Plant Design and Operation 15-23 19-29%

Each area is further divided. Mass/Energy Balances splits into Mass Balances (6-9) and Energy Balances (6-9). Thermodynamics splits into Basic Thermodynamics (4-6), Chemical Equilibria (3-5), and Phase Equilibria (4-6). Heat Transfer splits into Fundamentals (5-8) and Applications (4-6). Chemical Reaction Engineering splits into Fundamentals (3-5) and Applications (3-5). Fluids splits into Fundamentals (5-8) and Applications (5-8). Mass Transfer splits into Fundamentals (3-5) and Applications (4-6). Plant Design and Operation splits into Safety, Health, and Environment (4-6) , Design (7-11) , and Operation and Maintenance (4-6) .

The single most misread fact about this exam: Plant Design and Operation, at 15-23 questions, is the largest knowledge area — bigger than Thermodynamics, and nearly double Chemical Reaction Engineering. Candidates who study like this is an academic transport-and-thermo exam routinely walk in underprepared for a quarter of the questions. Process hazard analysis, relief sizing, materials of construction, P&IDs, equipment sizing, control valves, startup and shutdown procedures, mechanical integrity, and debottlenecking are all explicitly named subtopics, and this guide teaches every one of them. Questions (midpoint of official range)

  • Plant Design & Operation |#################### 19
  • Mass/Energy Balances |############### 15
  • Thermodynamics |############## 14
  • Fluids |############# 13
  • Heat Transfer |########### 11.5
  • Mass Transfer |######### 9
  • Chem Reaction Engineering |######## 8
  • +----------------------------

Note that the areas the specification calls "Fundamentals" are consistently as heavily weighted as the "Applications" that follow them. NCEES is testing whether you can still do a mechanical-energy balance and a Fick's-law flux calculation, not only whether you can pick a pump.

3. References, Scoring, and Results

Closed book with an electronic reference. NCEES provides the PE Chemical Reference Handbook and all specified design standards on-screen. These are the only reference materials you may use. You cannot bring notes, your own handbook, textbooks, or printed equation sheets. Section 1.2 of this guide covers how to exploit the on-screen handbook rather than fight it.

Scoring. NCEES does not publish a fixed passing percentage. The exam is scored against a criterion-referenced cut score established by subject-matter experts for the specific question set, then applied to the scaled score. There is no curve against other candidates in your window, and there is no penalty for guessing — answer every question .

Results. Results are typically available 7-10 days after the exam through your MyNCEES account. They are reported as pass or fail only. If you fail, NCEES provides a diagnostic report showing your performance by major topic, which is genuinely useful for targeting a retake.

Retakes. NCEES policy provides one attempt per testing window (the quarterly windows January-March, April-June, July-September, October-December) and no more than three attempts in any 12-month period . Individual state boards may impose stricter limits, so check your board's rules.

4. Cost, Eligibility, and Pass Rates

The NCEES exam fee is $400 . Your state licensing board may charge separate application, review, or licensing fees on top of that, and board approval is generally required before you can register.

Eligibility is set by your state board , not by NCEES. The common pattern is an engineering degree, passage of the FE (Fundamentals of Engineering) exam, and a period of progressive engineering experience (frequently four years) under appropriate supervision — but the specifics genuinely differ by jurisdiction, and some boards allow you to sit for the PE before completing the experience requirement. Verify against your own board.

NCEES publishes pass rates on the PE Chemical exam page. As of the July 2026 posting, first-time takers passed at 55% (225 examinees) and repeat takers at 32% (81 examinees). Two things follow. First, this is a genuinely difficult exam and roughly two in five well-qualified first-time candidates do not pass. Second, the repeat rate is lower than the first-time rate, which is the signature of candidates who retake without changing their preparation strategy. Use the diagnostic report.

5. What This Means for Your Study Plan

Convert the specification directly into study hours. If Plant Design and Operation is 19-29% of the exam, it deserves roughly that share of your preparation — not the 5% it typically gets. A defensible allocation looks like this:

  • Focus Share of study time Why
  • Plant Design and Operation ~25% Largest area; broadest and least familiar to most candidates
  • Mass/Energy Balances ~19% Second largest; also the substrate for every other area
  • Thermodynamics ~17% Third largest; phase and reaction equilibria are calculation-dense
  • Fluids ~16% Piping, pumps, compressible flow, flow measurement
  • Heat Transfer ~14% Conduction through exchanger rating
  • Mass Transfer ~11% Distillation, absorption, and the other separations
  • Chemical Reaction Engineering ~10% Smallest area; do not over-invest in reactor design

That last row surprises people. Reactor design is the intellectual centerpiece of a chemical engineering degree, and it is the smallest area on this exam at 6-10 questions. Study it well enough to be fast and accurate; do not study it at the expense of relief valve sizing.