Study guide

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion

PE Chemical Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the PE Chemical Exam How to Use This Guide and the NCEES Handbook

2 Chapter 1: Material Balances & Flowsheet Calculations

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting 1.2 Steady-State Material Balances (Reactive & Non-Reactive Systems) 1.3 Recycle, Bypass, and Purge Operations

3 Chapter 2: Energy Balances & Thermochemistry

2.1 Enthalpy Accounting, Sensible Heat, and Phase Changes 2.2 Heats of Reaction, Formation, and Adiabatic Flame Temperatures 2.3 Unsteady-State Mass and Energy Balances

4 Chapter 3: Fluid Statics & Incompressible Pipe Flow

3.1 Fluid Statics, Pressure Measurement, and Manometry 3.2 Incompressible Flow, Friction Factors, and the Moody Diagram 3.3 Minor Losses, Equivalent Length, and Piping Networks 3.4 Pumps, Compressors, and NPSH Calculations

5 Chapter 4: Advanced Fluid Dynamics & Compressible Flow

4.1 Compressible Gas Flow, Sonic Velocity, and Choked Flow 4.2 Flow Measurement Devices (Orifices, Venturis, Rotameters) 4.3 Multiphase Flow and Fluidization Principles 4.4 Mixing, Agitation, and Agitator Scale-Up

6 Chapter 5: Thermodynamic Laws & Fundamental Relations

5.1 First and Second Laws, Heat Engines, and Carnot Efficiency 5.2 Entropy, Availability, and Exergy Analysis 5.3 Fundamental Property Relations and Maxwell Equations

7 Chapter 6: Real Gases & Equations of State

6.1 Volumetric Properties and Compressibility Factor Charts 6.2 Cubic Equations of State (vdW, RK, SRK, and Peng-Robinson) 6.3 Residual Properties and Enthalpy/Entropy Departure Functions

8 Chapter 7: Phase & Chemical Reaction Equilibria

7.1 Pure Component Vapor Pressure and Phase Equilibria 7.2 Vapor-Liquid Equilibrium (VLE), Raoult's Law, and Activity Coefficients 7.3 Chemical Reaction Equilibria and Equilibrium Constant Calculation

9 Chapter 8: Heat Transfer Mechanisms & Conduction

8.1 Steady-State Conduction in Planar, Cylindrical, and Spherical Geometries 8.2 Convective Heat Transfer and Dimensionless Correlations 8.3 Thermal Radiation, Emissivity, and Surface Radiation Exchange

10 Chapter 9: Heat Exchanger Design & Phase Change

9.1 Shell-and-Tube Exchanger Design, TEMA Standards, and LMTD 9.2 Effectiveness-NTU Method and Exchanger Rating 9.3 Boiling Regimes, Condensation Phenomena, and Fouling Resistances

11 Chapter 10: Mass Transfer Fundamentals & Diffusion

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion 10.2 Convective Mass Transfer and Film Theories 10.3 Mass Transfer Dimensionless Numbers (Sherwood, Schmidt, Peclet)

12 Chapter 11: Distillation Operations

11.1 Vapor-Liquid Equilibrium and Relative Volatility in Distillation 11.2 McCabe-Thiele Method for Binary Distillation 11.3 Packed vs Tray Columns, Flooding, and Tray Hydraulics 11.4 Multicomponent Distillation Fundamentals and Key Components

13 Chapter 12: Rate-Controlled & Equilibrium Separations

12.1 Gas Absorption, Stripping, and the Kremser Equation 12.2 Liquid-Liquid Extraction and Ternary Phase Equilibria 12.3 Adsorption, Membrane Separations, and Drying Operations 12.4 Filtration, Crystallization, and Solid-Fluid Separations

14 Chapter 13: Chemical Kinetics & Ideal Isothermal Reactors

13.1 Reaction Rates, Rate Laws, and Order of Reaction 13.2 Temperature Dependence and the Arrhenius Equation 13.3 Batch Reactors and Continuous Stirred-Tank Reactors (CSTR) 13.4 Plug Flow Reactors (PFR) and Reactor Combinations

15 Chapter 14: Non-Ideal Flow, Non-Isothermal Reactors & Catalysis

14.1 Yield, Selectivity, and Multiple Reactions (Series and Parallel) 14.2 Non-Isothermal Reactor Design and Thermal Runaway 14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

16 Chapter 15: Physical & Transport Properties of Fluids

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations 15.2 Thermal Conductivity and Specific Heat Capacities 15.3 Estimation Methods and Corresponding States Principles

17 Chapter 16: Materials of Construction & Corrosion

16.1 Mechanical Properties and Materials Selection in Chemical Plants 16.2 Corrosion Mechanisms, Materials Degradation, and Prevention

18 Chapter 17: Process Safety & Pressure Relief Systems

17.1 Hazard Identification Methodologies (HAZOP, FMEA, What-If) 17.2 Pressure Relief Valve (PRV) and Rupture Disk Sizing 17.3 Flammability, Explosions, and Toxic Dispersion Limits 17.4 Inerting, Purging, Discharge Location, and Containment

19 Chapter 18: Process Control & Engineering Economics

18.1 Process Dynamics and Feedback Control Loops 18.2 PID Controller Tuning and Loop Stability 18.3 Chemical Plant Capital Cost Estimation and Profitability Analysis 18.4 Field Instrumentation, Control Valves, Alarms, and Safety Instrumented Systems

20 Chapter 19: Process Design, Equipment Selection & Environmental Compliance

19.1 Process Flow Diagrams, P&IDs, Scale-Up, and Plant Siting 19.2 Process Equipment Selection, Sizing, and Optimization 19.3 Emissions Evaluation, Mitigation, and Remediation

21 Chapter 20: Plant Operation, Reliability & Continuous Improvement

20.1 Operating Procedures, Startup, and Shutdown 20.2 Mechanical Integrity, Reliability, and Failure Mechanisms 20.3 Debottlenecking, Optimization, and Troubleshooting

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion

Key Takeaways Explain This Topic AI

Fick's first law distinguishes diffusive flux relative to the molar-average velocity (J_A* = -C * D_AB * dx_A/dz) from absolute molar flux relative to stationary coordinates (N_A = x_A * (N_A + N_B) - C * D_AB * dx_A/dz), where the first term represents convective bulk drift and the second represents molecular diffusion.

In Equimolar Counterdiffusion (EMCD, N_B = -N_A), the convective bulk drift term vanishes identically (N_A + N_B = 0), producing a strictly linear partial pressure profile and integrated flux N_A = D_AB * (P_A1 - P_A2) / (R * T * z) = C * D_AB * (y_A1 - y_A2) / z.

In diffusion of A through stagnant, non-diffusing B (N_B = 0, such as evaporation or gas absorption), the convective drift flux augments molar transport by the log-mean factor: N_A = (D_AB * P / (R * T * z * P_B,lm)) * (P_A1 - P_A2), where P_B,lm = (P_B2 - P_B1) / ln(P_B2 / P_B1); because P / P_B,lm > 1.0, stagnant diffusion flux always exceeds EMCD flux for identical terminal partial pressures.

Diffusivity scaling laws differ fundamentally by phase: gas diffusivities scale as T^1.75 / P (via the Fuller-Schettler-Giddings correlation) with typical magnitudes of 10^-5 to 10^-4 m²/s, whereas liquid diffusivities scale as T / mu (via the Wilke-Chang correlation) with typical magnitudes of 10^-10 to 10^-9 m²/s—roughly four orders of magnitude slower.

Knudsen diffusion governs transport in microporous catalysts when the pore diameter is significantly smaller than the molecular mean free path (Knudsen number Kn = lambda / d_pore > 10), yielding D_K,A = (d_pore / 3) * sqrt(8 * R * T / (pi * M_A)), which is completely independent of total system pressure.

Last updated: September 2026

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion

On the NCEES PE Chemical Exam , mass transfer fundamentals provide the analytical bedrock for rating and sizing distillation columns, gas absorbers, liquid-liquid extractors, and membrane separators. While fluid mechanics dictates the macroscopic convective flow of process streams, separation at the phase boundary or within stagnant boundary layers is ultimately constrained by molecular diffusion —the spontaneous transport of individual chemical species down a gradient of chemical potential or concentration resulting from random thermal molecular motion.

1. Physical Foundations of Diffusion and Reference Frames

To analyze mass transport rigorously, chemical engineers distinguish between two coordinate reference frames:

A reference frame moving with the molar-average velocity of the fluid mixture ( v ∗ v^* v ∗ ). In this moving frame, mass transport occurs purely by molecular diffusion.

A fixed laboratory coordinate reference frame (stationary observer). In this frame, mass transport represents the vector sum of bulk convective flow (drift) plus molecular diffusion. +---------------------------------------------------------------------------------+

  • | TOTAL MOLAR FLUX IN FIXED COORDINATES |
  • | |
  • | N_A = x_A * (N_A + N_B) - C * D_AB * dx_A/dz |
  • | ^ ^ ^ |
  • | [Total Molar Flux] [Convective Bulk Drift] [Molecular Diffusion]|
  • | (relative to fixed (carried by net bulk motion (Fick's First Law relative|
  • | coordinates) of all diffusing species) to molar-average velocity)|
  • +---------------------------------------------------------------------------------+
  • Molar-Average Velocity and Diffusive Flux ( J A ∗ J_A^* J A ∗ ​ )

For a binary mixture composed of species A A A and B B B , let u A u_A u A ​ and u B u_B u B ​ be the absolute linear velocities of the respective species in the z z z -direction relative to a fixed stationary boundary. The absolute molar fluxes relative to stationary coordinates are: N A = C A u A , N B = C B u B N_A = C_A u_A, \quad N_B = C_B u_B N A ​ = C A ​ u A ​ , N B ​ = C B ​ u B ​

Where:

N A , N B N_A, N_B N A ​ , N B ​ = molar fluxes relative to fixed coordinates ( kmol/(m 2 ⋅ s) \text{kmol/(m}^2\cdot\text{s)} kmol/(m 2 ⋅ s) or lbmol/(ft 2 ⋅ hr) \text{lbmol/(ft}^2\cdot\text{hr)} lbmol/(ft 2 ⋅ hr) ).

C A , C B C_A, C_B C A ​ , C B ​ = molar concentrations of species A A A and B B B ( kmol/m 3 \text{kmol/m}^3 kmol/m 3 or lbmol/ft 3 \text{lbmol/ft}^3 lbmol/ft 3 ).

C = C A + C B C = C_A + C_B C = C A ​ + C B ​ = total molar concentration of the mixture.

x A = C A / C , x B = C B / C x_A = C_A / C, \quad x_B = C_B / C x A ​ = C A ​ / C , x B ​ = C B ​ / C = mole fractions ( x A + x B = 1.0 x_A + x_B = 1.0 x A ​ + x B ​ = 1.0 ).

The mixture molar-average velocity ( v ∗ v^* v ∗ ) is defined as: v ∗ = C A u A + C B u B C = x A u A + x B u B = N A + N B C v^* = \frac{C_A u_A + C_B u_B}{C} = x_A u_A + x_B u_B = \frac{N_A + N_B}{C} v ∗ = C C A ​ u A ​ + C B ​ u B ​ ​ = x A ​ u A ​ + x B ​ u B ​ = C N A ​ + N B ​ ​

The diffusive molar flux of species A A A relative to the moving molar-average velocity frame is denoted J A ∗ J_A^* J A ∗ ​ and is governed by Fick's First Law of Diffusion : J A ∗ = C A ( u A − v ∗ ) = − C D A B d x A d z J_A^* = C_A (u_A - v^*) = -C D_{AB} \frac{dx_A}{dz} J A ∗ ​ = C A ​ ( u A ​ − v ∗ ) = − C D A B ​ d z d x A ​ ​

Where:

D A B D_{AB} D A B ​ = binary molecular diffusivity of species A A A diffusing through species B B B ( m 2 / s \text{m}^2/\text{s} m 2 / s or ft 2 / hr \text{ft}^2/\text{hr} ft 2 / hr ).

In a binary system, thermodynamics and continuity dictate that D A B = D B A D_{AB} = D_{BA} D A B ​ = D B A ​ and J A ∗ + J B ∗ = 0 J_A^* + J_B^* = 0 J A ∗ ​ + J B ∗ ​ = 0 .

The General 1-D Absolute Molar Flux Equation

Substituting v ∗ = ( N A + N B ) / C v^* = (N_A + N_B)/C v ∗ = ( N A ​ + N B ​ ) / C into the definition of J A ∗ J_A^* J A ∗ ​ yields: N A = C A v ∗ + J A ∗ = x A ( N A + N B ) − C D A B d x A d z N_A = C_A v^* + J_A^* = x_A (N_A + N_B) - C D_{AB} \frac{dx_A}{dz} N A ​ = C A ​ v ∗ + J A ∗ ​ = x A ​ ( N A ​ + N B ​ ) − C D A B ​ d z d x A ​ ​

For an ideal gas phase, where C = P / ( R T ) C = P / (R T) C = P / ( RT ) , x A = y A = p A / P x_A = y_A = p_A / P x A ​ = y A ​ = p A ​ / P , and C A = p A / ( R T ) C_A = p_A / (R T) C A ​ = p A ​ / ( RT ) : N A = y A ( N A + N B ) − D A B R T d p A d z N_A = y_A (N_A + N_B) - \frac{D_{AB}}{R T} \frac{dp_A}{dz} N A ​ = y A ​ ( N A ​ + N B ​ ) − RT D A B ​ ​ d z d p A ​ ​

Where:

P P P = total system absolute pressure ( kPa \text{kPa} kPa , bar \text{bar} bar , or atm \text{atm} atm ).

p A p_A p A ​ = partial pressure of species A A A ( kPa \text{kPa} kPa , bar \text{bar} bar , or atm \text{atm} atm ).

R R R = universal gas constant ( 8.31446 J/(mol ⋅ K) = 8.31446 kPa ⋅ m 3 / ( kmol ⋅ K) = 0.082057 L ⋅ atm / ( mol ⋅ K) 8.31446\text{ J/(mol}\cdot\text{K)} = 8.31446\text{ kPa}\cdot\text{m}^3/(\text{kmol}\cdot\text{K)} = 0.082057\text{ L}\cdot\text{atm}/(\text{mol}\cdot\text{K)} 8.31446 J/(mol ⋅ K) = 8.31446 kPa ⋅ m 3 / ( kmol ⋅ K) = 0.082057 L ⋅ atm / ( mol ⋅ K) ).

T T T = absolute thermodynamic temperature ( K \text{K} K or ∘ R ^\circ\text{R} ∘ R ).

Important

Bulk Drift vs. Diffusion:

The term y A ( N A + N B ) y_A (N_A + N_B) y A ​ ( N A ​ + N B ​ ) represents convective mass transport induced by net volumetric movement (bulk drift) toward or away from the interface. If species A A A and B B B diffuse at unequal molar rates, a pressure gradient will temporarily develop, establishing a bulk hydrodynamic flow that equalizes the total mechanical pressure. Fickian diffusion − C D A B ( d x A / d z ) -C D_{AB} (dx_A/dz) − C D A B ​ ( d x A ​ / d z ) operates superimposed on this bulk drift.

  • 2. Equimolar Counterdiffusion (EMCD)
  • Defining Characteristics

Equimolar Counterdiffusion (EMCD) occurs when one mole of species A A A diffuses in the positive z z z -direction while exactly one mole of species B B B diffuses in the opposite direction: N B = − N A ⟹ N A + N B = 0 N_B = -N_A \implies N_A + N_B = 0 N B ​ = − N A ​ ⟹ N A ​ + N B ​ = 0

Industrial and Physical Examples

Binary Distillation of Similar Compounds: When latent heats of vaporization are approximately equal ( Δ H v a p , A ≈ Δ H v a p , B \Delta H_{vap,A} \approx \Delta H_{vap,B} Δ H v a p , A ​ ≈ Δ H v a p , B ​ ), the condensing vapor of the less volatile component releases precisely enough latent heat to vaporize an equimolar quantity of the more volatile liquid component from the tray.

Diffusion Between Two Connected Gas Vessels: Two large vessels maintained at identical total pressure and temperature containing different gases connected by a narrow capillary tube.

Derivation of EMCD Flux and Concentration Profile

Because N A + N B = 0 N_A + N_B = 0 N A ​ + N B ​ = 0 , the bulk convective drift term collapses to zero: N A = − C D A B d x A d z = − D A B R T d p A d z N_A = -C D_{AB} \frac{dx_A}{dz} = -\frac{D_{AB}}{R T} \frac{dp_A}{dz} N A ​ = − C D A B ​ d z d x A ​ ​ = − RT D A B ​ ​ d z d p A ​ ​

At steady state with no chemical reactions, species conservation requires that d N A / d z = 0 d N_A / dz = 0 d N A ​ / d z = 0 . For an ideal gas at constant temperature and pressure, C C C and D A B D_{AB} D A B ​ are constant. Separating variables and integrating across a stagnant boundary layer of thickness z = z 2 − z 1 = δ z = z_2 - z_1 = \delta z = z 2 ​ − z 1 ​ = δ : ∫ z 1 z 2 N A d z = − D A B R T ∫ p A 1 p A 2 d p A \int_{z_1}^{z_2} N_A dz = -\frac{D_{AB}}{R T} \int_{p_{A1}}^{p_{A2}} dp_A ∫ z 1 ​ z 2 ​ ​ N A ​ d z = − RT D A B ​ ​ ∫ p A 1 ​ p A 2 ​ ​ d p A ​ N A ⋅ ( z 2 − z 1 ) = − D A B R T ( p A 2 − p A 1 ) = D A B R T ( p A 1 − p A 2 ) N_A \cdot (z_2 - z_1) = -\frac{D_{AB}}{R T} (p_{A2} - p_{A1}) = \frac{D_{AB}}{R T} (p_{A1} - p_{A2}) N A ​ ⋅ ( z 2 ​ − z 1 ​ ) = − RT D A B ​ ​ ( p A 2 ​ − p A 1 ​ ) = RT D A B ​ ​ ( p A 1 ​ − p A 2 ​ ) N A = D A B R T z ( p A 1 − p A 2 ) = C D A B z ( y A 1 − y A 2 ) \mathbf{N_A = \frac{D_{AB}}{R T z} (p_{A1} - p_{A2}) = \frac{C D_{AB}}{z} (y_{A1} - y_{A2})} N A ​ = RTz D AB ​ ​ ( p A1 ​ − p A2 ​ ) = z C D AB ​ ​ ( y A1 ​ − y A2 ​ )

Integrating from z = 0 z = 0 z = 0 to an arbitrary distance z z z demonstrates that the partial pressure profile under EMCD is strictly linear : p A ( z ) = p A 1 − ( p A 1 − p A 2 z 2 − z 1 ) z p_A(z) = p_{A1} - \left( \frac{p_{A1} - p_{A2}}{z_2 - z_1} \right) z p A ​ ( z ) = p A 1 ​ − ( z 2 ​ − z 1 ​ p A 1 ​ − p A 2 ​ ​ ) z Partial Pressure (p_A) ^

  • p_A1 |*
  • | *
  • | * <--- Strictly Linear Profile (EMCD)
  • | *
  • p_A2 |________*_________
  • 0 z (Distance)
  • 3. Diffusion of A Through Stagnant, Non-Diffusing B ( N B = 0 N_B = 0 N B ​ = 0 )
  • Defining Characteristics

In many separation units, one component moves while the surrounding carrier medium remains stationary: N B = 0 ⟹ N A + N B = N A N_B = 0 \implies N_A + N_B = N_A N B ​ = 0 ⟹ N A ​ + N B ​ = N A ​

Industrial and Physical Examples

Stefan Tube Evaporation: Liquid volatile solvent evaporating from a capillary or deep pool into an inert, insoluble gas blanket (e.g., liquid benzene or water evaporating into dry air).

Gas Absorption / Scrubbing: Absorption of a highly soluble gas (e.g., ammonia or hydrogen chloride) from an insoluble carrier gas (air or methane) into an aqueous wash stream. The carrier gas does not dissolve ( N B = 0 N_B = 0 N B ​ = 0 ).

Catalytic Surface Reactions with Non-Equimolar Stoichiometry: E.g., 2 A → B 2A \to B 2 A → B or a cracking reaction where species molar fluxes differ.

Derivation of Stagnant-B Flux and the Stefan Drift

Setting N B = 0 N_B = 0 N B ​ = 0 in the general flux equation: N A = y A N A − D A B R T d p A d z N_A = y_A N_A - \frac{D_{AB}}{R T} \frac{dp_A}{dz} N A ​ = y A ​ N A ​ − RT D A B ​ ​ d z d p A ​ ​

Rearranging to isolate N A N_A N A ​ : N A ( 1 − y A ) = − D A B R T d p A d z N_A (1 - y_A) = -\frac{D_{AB}}{R T} \frac{dp_A}{dz} N A ​ ( 1 − y A ​ ) = − RT D A B ​ ​ d z d p A ​ ​

Recognizing that in a binary gas mixture y A = p A / P y_A = p_A / P y A ​ = p A ​ / P , the factor ( 1 − y A ) = ( P − p A ) / P = p B / P (1 - y_A) = (P - p_A)/P = p_B / P ( 1 − y A ​ ) = ( P − p A ​ ) / P = p B ​ / P : N A ( p B P ) = − D A B R T d p A d z N_A \left( \frac{p_B}{P} \right) = -\frac{D_{AB}}{R T} \frac{dp_A}{dz} N A ​ ( P p B ​ ​ ) = − RT D A B ​ ​ d z d p A ​ ​

Because total pressure is uniform ( P = p A + p B = constant P = p_A + p_B = \text{constant} P = p A ​ + p B ​ = constant ), differentiating gives d p A = − d p B dp_A = -dp_B d p A ​ = − d p B ​ : N A ( p B P ) = D A B R T d p B d z N_A \left( \frac{p_B}{P} \right) = \frac{D_{AB}}{R T} \frac{dp_B}{dz} N A ​ ( P p B ​ ​ ) = RT D A B ​ ​ d z d p B ​ ​

Separating variables across the diffusion path length from z = 0 z = 0 z = 0 (where p A = p A 1 , p B = p B 1 p_A = p_{A1}, p_B = p_{B1} p A ​ = p A 1 ​ , p B ​ = p B 1 ​ ) to z = δ z = \delta z = δ (where p A = p A 2 , p B = p B 2 p_A = p_{A2}, p_B = p_{B2} p A ​ = p A 2 ​ , p B ​ = p B 2 ​ ): ∫ 0 δ N A d z = D A B P R T ∫ p B 1 p B 2 d p B p B \int_0^\delta N_A dz = \frac{D_{AB} P}{R T} \int_{p_{B1}}^{p_{B2}} \frac{dp_B}{p_B} ∫ 0 δ ​ N A ​ d z = RT D A B ​ P ​ ∫ p B 1 ​ p B 2 ​ ​ p B ​ d p B ​ ​ N A δ = D A B P R T ln ⁡ ( p B 2 p B 1 ) = D A B P R T ln ⁡ ( P − p A 2 P − p A 1 ) N_A \delta = \frac{D_{AB} P}{R T} \ln\left( \frac{p_{B2}}{p_{B1}} \right) = \frac{D_{AB} P}{R T} \ln\left( \frac{P - p_{A2}}{P - p_{A1}} \right) N A ​ δ = RT D A B ​ P ​ ln ( p B 1 ​ p B 2 ​ ​ ) = RT D A B ​ P ​ ln ( P − p A 1 ​ P − p A 2 ​ ​ ) N A = D A B P R T z ln ⁡ ( P − p A 2 P − p A 1 ) \mathbf{N_A = \frac{D_{AB} P}{R T z} \ln\left( \frac{P - p_{A2}}{P - p_{A1}} \right)} N A ​ = RTz D AB ​ P ​ ln ( P − p A1 ​ P − p A2 ​ ​ )

The Log-Mean Partial Pressure of the Stagnant Gas ( p B , l m p_{B,lm} p B , l m ​ )

To cast the stagnant diffusion equation into a form that directly parallels EMCD, we introduce the log-mean partial pressure of the non-diffusing component B B B : p B , l m = p B 2 − p B 1 ln ⁡ ( p B 2 / p B 1 ) p_{B,lm} = \frac{p_{B2} - p_{B1}}{\ln(p_{B2} / p_{B1})} p B , l m ​ = ln ( p B 2 ​ / p B 1 ​ ) p B 2 ​ − p B 1 ​ ​

Since p B 2 − p B 1 = ( P − p A 2 ) − ( P − p A 1 ) = p A 1 − p A 2 p_{B2} - p_{B1} = (P - p_{A2}) - (P - p_{A1}) = p_{A1} - p_{A2} p B 2 ​ − p B 1 ​ = ( P − p A 2 ​ ) − ( P − p A 1 ​ ) = p A 1 ​ − p A 2 ​ , solving for the logarithmic term gives: ln ⁡ ( p B 2 p B 1 ) = p A 1 − p A 2 p B , l m \ln\left( \frac{p_{B2}}{p_{B1}} \right) = \frac{p_{A1} - p_{A2}}{p_{B,lm}} ln ( p B 1 ​ p B 2 ​ ​ ) = p B , l m ​ p A 1 ​ − p A 2 ​ ​

Substituting this identity back into the flux equation yields the classical engineering expression: N A = D A B P R T z p B , l m ( p A 1 − p A 2 ) = C D A B z ( P p B , l m ) ( y A 1 − y A 2 ) \mathbf{N_A = \frac{D_{AB} P}{R T z p_{B,lm}} (p_{A1} - p_{A2}) = \frac{C D_{AB}}{z} \left( \frac{P}{p_{B,lm}} \right) (y_{A1} - y_{A2})} N A ​ = RTz p B , lm ​ D AB ​ P ​ ( p A1 ​ − p A2 ​ ) = z C D AB ​ ​ ( p B , lm ​ P ​ ) ( y A1 ​ − y A2 ​ )

The Drift Enhancement Multiplier ( P / p B , l m P / p_{B,lm} P / p B , l m ​ )

Comparing the two fundamental flux expressions for an identical partial pressure driving force ( p A 1 − p A 2 ) (p_{A1} - p_{A2}) ( p A 1 ​ − p A 2 ​ ) : N A , stagnant N A , EMCD = P p B , l m \frac{N_{A,\text{stagnant}}}{N_{A,\text{EMCD}}} = \frac{P}{p_{B,lm}} N A , EMCD ​ N A , stagnant ​ ​ = p B , l m ​ P ​

Because p B , l m p_{B,lm} p B , l m ​ represents the average partial pressure of component B B B , and since p B < P p_B < P p B ​ < P , the ratio P / p B , l m P / p_{B,lm} P / p B , l m ​ is always strictly greater than 1.0 1.0 1.0 .

For dilute systems where y A ≪ 1 y_A \ll 1 y A ​ ≪ 1 (e.g., y A < 0.05 y_A < 0.05 y A ​ < 0.05 ), p B ≈ P p_B \approx P p B ​ ≈ P , so P / p B , l m ≈ 1.0 P / p_{B,lm} \approx 1.0 P / p B , l m ​ ≈ 1.0 , and the stagnant flux equation converges to the EMCD equation.

For concentrated systems where y A y_A y A ​ is large, the Stefan bulk flow carries substantial solute toward the boundary, significantly amplifying the net flux.

Non-Linear Concentration Profile in Stagnant Media

Unlike EMCD, the concentration profile for diffusion through stagnant B B B is non-linear (exponential) due to convective bulk drag: P − p A ( z ) P − p A 1 = p B ( z ) p B 1 = ( p B 2 p B 1 ) z / δ \frac{P - p_A(z)}{P - p_{A1}} = \frac{p_B(z)}{p_{B1}} = \left( \frac{p_{B2}}{p_{B1}} \right)^{z / \delta} P − p A 1 ​ P − p A ​ ( z ) ​ = p B 1 ​ p B ​ ( z ) ​ = ( p B 1 ​ p B 2 ​ ​ ) z / δ Partial Pressure (p_A) ^

p_A1 |*

| ` .

| ` . <--- Concave-Up Profile (Stagnant B)

| ` .

  • p_A2 |_____________*____
  • 0 z (Distance)
  • 4. Transient Molecular Diffusion & Fick's Second Law

When concentration changes with respect to both position and time, species conservation in a stationary medium with constant D A B D_{AB} D A B ​ is governed by Fick's Second Law : ∂ C A ∂ t = D A B ∂ 2 C A ∂ z 2 \frac{\partial C_A}{\partial t} = D_{AB} \frac{\partial^2 C_A}{\partial z^2} ∂ t ∂ C A ​ ​ = D A B ​ ∂ z 2 ∂ 2 C A ​ ​

Semi-Infinite Medium Solution

Consider a semi-infinite liquid or solid medium initially at uniform concentration C A 0 C_{A0} C A 0 ​ . At t = 0 t = 0 t = 0 , the surface at z = 0 z = 0 z = 0 is suddenly exposed to a constant surface concentration C A s C_{As} C A s ​ . The boundary and initial conditions are:

  • C A ( z , 0 ) = C A 0 C_A(z, 0) = C_{A0} C A ​ ( z , 0 ) = C A 0 ​ for z ≥ 0 z \ge 0 z ≥ 0
  • C A ( 0 , t ) = C A s C_A(0, t) = C_{As} C A ​ ( 0 , t ) = C A s ​ for t > 0 t > 0 t > 0
  • C A ( ∞ , t ) = C A 0 C_A(\infty, t) = C_{A0} C A ​ ( ∞ , t ) = C A 0 ​ for t > 0 t > 0 t > 0

The analytical solution is formulated using the complementary error function ( erfc \text{erfc} erfc ): C A ( z , t ) − C A 0 C A s − C A 0 = erfc ( z 2 D A B t ) = 1 − erf ( z 2 D A B t ) \frac{C_A(z, t) - C_{A0}}{C_{As} - C_{A0}} = \text{erfc}\left( \frac{z}{2 \sqrt{D_{AB} t}} \right) = 1 - \text{erf}\left( \frac{z}{2 \sqrt{D_{AB} t}} \right) C A s ​ − C A 0 ​ C A ​ ( z , t ) − C A 0 ​ ​ = erfc ( 2 D A B ​ t ​ z ​ ) = 1 − erf ( 2 D A B ​ t ​ z ​ )

Instantaneous Surface Molar Flux

Evaluating the flux at the interface ( z = 0 z = 0 z = 0 ) using Fick's first law: N A ( 0 , t ) = − D A B ∂ C A ∂ z ∣ z = 0 = D A B π t ( C A s − C A 0 ) N_A(0, t) = -D_{AB} \left. \frac{\partial C_A}{\partial z} \right|_{z=0} = \sqrt{\frac{D_{AB}}{\pi t}} (C_{As} - C_{A0}) N A ​ ( 0 , t ) = − D A B ​ ∂ z ∂ C A ​ ​ ​ z = 0 ​ = π t D A B ​ ​ ​ ( C A s ​ − C A 0 ​ )

Note

Significance for Mass Transfer Theories:

The time-dependent decay of surface flux as t − 1 / 2 t^{-1/2} t − 1/2 forms the mathematical foundation of Higbie's Penetration Theory and Danckwerts' Surface Renewal Theory , where turbulent eddies expose fresh liquid elements to a gas interface for brief contact times.

  • 5. Estimation of Diffusivity in Gases, Liquids, and Porous Media
  • 1. Fuller-Schettler-Giddings (FSG) Correlation for Binary Gases

For low-pressure binary gas mixtures ( P < 10 bar P < 10\text{ bar} P < 10 bar ), the semi-empirical Fuller-Schettler-Giddings (FSG) method provides superior accuracy (typical error < 5 % < 5\% < 5% ): D A B = 1.013 × 10 − 7 ⋅ T 1.75 ( 1 M A + 1 M B ) 0.5 P [ ( ∑ v ) A 1 / 3 + ( ∑ v ) B 1 / 3 ] 2 D_{AB} = \frac{1.013 \times 10^{-7} \cdot T^{1.75} \left( \frac{1}{M_A} + \frac{1}{M_B} \right)^{0.5}}{P \left[ \left(\sum v\right)_A^{1/3} + \left(\sum v\right)_B^{1/3} \right]^2} D A B ​ = P [ ( ∑ v ) A 1/3 ​ + ( ∑ v ) B 1/3 ​ ] 2 1.013 × 1 0 − 7 ⋅ T 1.75 ( M A ​ 1 ​ + M B ​ 1 ​ ) 0.5 ​

Where:

D A B D_{AB} D A B ​ = binary gas diffusivity ( m 2 / s \text{m}^2/\text{s} m 2 / s ).

T T T = absolute temperature ( K \text{K} K ).

P P P = absolute pressure ( bar \text{bar} bar ).

M A , M B M_A, M_B M A ​ , M B ​ = molecular weights ( g/mol \text{g/mol} g/mol ).

∑ v \sum v ∑ v = sum of atomic diffusion volumes (e.g., C = 15.9 , H = 2.31 , O = 6.11 , N = 4.54 , Air = 19.7 \text{C} = 15.9, \text{H} = 2.31, \text{O} = 6.11, \text{N} = 4.54, \text{Air} = 19.7 C = 15.9 , H = 2.31 , O = 6.11 , N = 4.54 , Air = 19.7 ).

Scaling Relations for Gases: D A B ∝ T 1.75 P ⟹ D A B ( T 2 , P 2 ) = D A B ( T 1 , P 1 ) ( T 2 T 1 ) 1.75 ( P 1 P 2 ) D_{AB} \propto \frac{T^{1.75}}{P} \implies D_{AB}(T_2, P_2) = D_{AB}(T_1, P_1) \left( \frac{T_2}{T_1} \right)^{1.75} \left( \frac{P_1}{P_2} \right) D A B ​ ∝ P T 1.75 ​ ⟹ D A B ​ ( T 2 ​ , P 2 ​ ) = D A B ​ ( T 1 ​ , P 1 ​ ) ( T 1 ​ T 2 ​ ​ ) 1.75 ( P 2 ​ P 1 ​ ​ )

2. Wilke-Chang Correlation for Dilute Liquid Solutions

Liquid diffusion is constrained by molecular packing and solvent viscosity. The Wilke-Chang correlation applies to small solute molecules ( A A A ) diffusing through dilute liquid solvent ( B B B ): D A B = 7.4 × 10 − 8 ⋅ ( ϕ M B ) 0.5 ⋅ T μ B ⋅ V A 0.6 D_{AB} = \frac{7.4 \times 10^{-8} \cdot (\phi M_B)^{0.5} \cdot T}{\mu_B \cdot V_A^{0.6}} D A B ​ = μ B ​ ⋅ V A 0.6 ​ 7.4 × 1 0 − 8 ⋅ ( ϕ M B ​ ) 0.5 ⋅ T ​

Where:

D A B D_{AB} D A B ​ = liquid diffusivity ( cm 2 / s \text{cm}^2/\text{s} cm 2 / s ; multiply by 10 − 4 10^{-4} 1 0 − 4 to convert to m 2 / s \text{m}^2/\text{s} m 2 / s ).

ϕ \phi ϕ = solvent association factor:

  • Water: ϕ = 2.6 \phi = 2.6 ϕ = 2.6
  • Methanol: ϕ = 1.9 \phi = 1.9 ϕ = 1.9
  • Ethanol: ϕ = 1.5 \phi = 1.5 ϕ = 1.5
  • Unassociated solvents (benzene, hexane, toluene, diethyl ether): ϕ = 1.0 \phi = 1.0 ϕ = 1.0

M B M_B M B ​ = molecular weight of solvent ( g/mol \text{g/mol} g/mol ).

T T T = absolute temperature ( K \text{K} K ).

μ B \mu_B μ B ​ = dynamic viscosity of solvent ( cP \text{cP} cP ; 1 cP = 10 − 3 Pa ⋅ s = 1 mPa ⋅ s 1\text{ cP} = 10^{-3}\text{ Pa}\cdot\text{s} = 1\text{ mPa}\cdot\text{s} 1 cP = 1 0 − 3 Pa ⋅ s = 1 mPa ⋅ s ).

V A V_A V A ​ = molar volume of solute at its normal boiling point ( cm 3 / mol \text{cm}^3/\text{mol} cm 3 / mol ).

Scaling Relations for Liquids: Because liquids are essentially incompressible, liquid diffusivity is practically independent of pressure at industrial pressures ( < 50 bar < 50\text{ bar} < 50 bar ). Temperature scaling depends heavily on solvent viscosity: D A B ∝ T μ B ( T ) ⟹ D A B ( T 2 ) = D A B ( T 1 ) ( T 2 T 1 ) ( μ B ( T 1 ) μ B ( T 2 ) ) D_{AB} \propto \frac{T}{\mu_B(T)} \implies D_{AB}(T_2) = D_{AB}(T_1) \left( \frac{T_2}{T_1} \right) \left( \frac{\mu_B(T_1)}{\mu_B(T_2)} \right) D A B ​ ∝ μ B ​ ( T ) T ​ ⟹ D A B ​ ( T 2 ​ ) = D A B ​ ( T 1 ​ ) ( T 1 ​ T 2 ​ ​ ) ( μ B ​ ( T 2 ​ ) μ B ​ ( T 1 ​ ) ​ )

3. Knudsen Diffusion in Porous Solids

When gas diffusion occurs within micro-porous catalyst pellets or zeolites where pore diameter ( d p o r e d_{pore} d p ore ​ ) is smaller than the molecular mean free path ( λ \lambda λ ): λ = k B T 2 π d m o l 2 P \lambda = \frac{k_B T}{\sqrt{2} \pi d_{mol}^2 P} λ = 2 ​ π d m o l 2 ​ P k B ​ T ​

The Knudsen number is defined as K n = λ / d p o r e Kn = \lambda / d_{pore} K n = λ / d p ore ​ :

K n < 0.01 Kn < 0.01 K n < 0.01 : Fickian molecular bulk diffusion dominates; collisions occur between gas molecules.

0.01 ≤ K n ≤ 10 0.01 \le Kn \le 10 0.01 ≤ K n ≤ 10 : Transition regime; both pore wall collisions and intermolecular collisions matter.

K n > 10 Kn > 10 K n > 10 : Knudsen diffusion dominates ; molecules collide almost exclusively with pore walls.

The Knudsen diffusivity ( D K , A D_{K,A} D K , A ​ ) is given by kinetic theory: D K , A = d p o r e 3 8 R T π M A = 48.5 ⋅ d p o r e T M A D_{K,A} = \frac{d_{pore}}{3} \sqrt{\frac{8 R T}{\pi M_A}} = 48.5 \cdot d_{pore} \sqrt{\frac{T}{M_A}} D K , A ​ = 3 d p ore ​ ​ π M A ​ 8 RT ​ ​ = 48.5 ⋅ d p ore ​ M A ​ T ​ ​

Tip

Knudsen Pressure Independence:

Notice that P P P does not appear anywhere in the Knudsen diffusivity equation! In the pure Knudsen regime, diffusivity is completely independent of total system pressure and scales strictly as T 0.5 M A − 0.5 T^{0.5} M_A^{-0.5} T 0.5 M A − 0.5 ​ . In the transition regime, the Bosanquet formula combines bulk and Knudsen resistances in series: 1 D e f f = 1 D A B + 1 D K , A \frac{1}{D_{eff}} = \frac{1}{D_{AB}} + \frac{1}{D_{K,A}} D e ff ​ 1 ​ = D A B ​ 1 ​ + D K , A ​ 1 ​

6. Summary Comparison Table: Diffusion Regimes and Transport Equations

Transport Regime Governing Flux Equation Net Bulk Drift ( v ∗ v^* v ∗ ) Concentration Profile Pressure Dependence Temperature Dependence Typical Diffusivity Range

Equimolar Counterdiffusion (EMCD) N A = D A B R T z ( p A 1 − p A 2 ) N_A = \frac{D_{AB}}{R T z} (p_{A1} - p_{A2}) N A ​ = RT z D A B ​ ​ ( p A 1 ​ − p A 2 ​ ) v ∗ = 0 v^* = 0 v ∗ = 0 ( N B = − N A N_B = -N_A N B ​ = − N A ​ ) Strictly linear across film D A B ∝ 1 / P D_{AB} \propto 1/P D A B ​ ∝ 1/ P ; N A N_A N A ​ independent of P P P for fixed Δ p A \Delta p_A Δ p A ​ D A B ∝ T 1.75 D_{AB} \propto T^{1.75} D A B ​ ∝ T 1.75 10 − 5 − 10 − 4 m 2 / s 10^{-5} - 10^{-4}\text{ m}^2/\text{s} 1 0 − 5 − 1 0 − 4 m 2 / s (Gases)

Diffusion of A in Stagnant B N A = D A B P R T z p B , l m ( p A 1 − p A 2 ) N_A = \frac{D_{AB} P}{R T z p_{B,lm}} (p_{A1} - p_{A2}) N A ​ = RT z p B , l m ​ D A B ​ P ​ ( p A 1 ​ − p A 2 ​ ) v ∗ = y A N A / C > 0 v^* = y_A N_A / C > 0 v ∗ = y A ​ N A ​ / C > 0 (Stefan drift) Non-linear (concave upward) D A B ∝ 1 / P D_{AB} \propto 1/P D A B ​ ∝ 1/ P ; N A ∝ P N_A \propto P N A ​ ∝ P via P / p B , l m P/p_{B,lm} P / p B , l m ​ enhancement D A B ∝ T 1.75 D_{AB} \propto T^{1.75} D A B ​ ∝ T 1.75 10 − 5 − 10 − 4 m 2 / s 10^{-5} - 10^{-4}\text{ m}^2/\text{s} 1 0 − 5 − 1 0 − 4 m 2 / s (Gases)

Liquid-Phase Molecular Diffusion N A = C D A B z ( x A 1 − x A 2 ) N_A = \frac{C D_{AB}}{z} (x_{A1} - x_{A2}) N A ​ = z C D A B ​ ​ ( x A 1 ​ − x A 2 ​ ) Variable; negligible for dilute solutes Approximately linear Practically independent of P P P ( < 50 bar <50\text{ bar} < 50 bar ) D A B ∝ T / μ B D_{AB} \propto T / \mu_B D A B ​ ∝ T / μ B ​ 10 − 10 − 10 − 9 m 2 / s 10^{-10} - 10^{-9}\text{ m}^2/\text{s} 1 0 − 10 − 1 0 − 9 m 2 / s (Liquids)

Knudsen Diffusion (Porous Media) N A = D K , A R T z ( p A 1 − p A 2 ) N_A = \frac{D_{K,A}}{R T z} (p_{A1} - p_{A2}) N A ​ = RT z D K , A ​ ​ ( p A 1 ​ − p A 2 ​ ) Negligible Linear along pore axis Independent of P P P ( D K ∝ P 0 D_K \propto P^0 D K ​ ∝ P 0 ) D K ∝ T 0.5 D_{K} \propto T^{0.5} D K ​ ∝ T 0.5 10 − 7 − 10 − 5 m 2 / s 10^{-7} - 10^{-5}\text{ m}^2/\text{s} 1 0 − 7 − 1 0 − 5 m 2 / s (Porous solids)

  • 7. Comprehensive Worked Numerical Example: Stefan Tube Evaporator Rating
  • Problem Statement

A chemical plant storage tank vent incorporates a vertical Stefan tube apparatus to quantify solvent evaporation losses. Liquid benzene ( A A A , C 6 H 6 \text{C}_6\text{H}_6 C 6 ​ H 6 ​ , M A = 78.11 g/mol M_A = 78.11\text{ g/mol} M A ​ = 78.11 g/mol ) is maintained at the bottom of a vertical tube at a constant temperature of T = 298.15 K T = 298.15\text{ K} T = 298.15 K ( 25.0 ∘ C 25.0^\circ\text{C} 25. 0 ∘ C ) and an ambient total pressure of P = 1.00 atm = 101.325 kPa P = 1.00\text{ atm} = 101.325\text{ kPa} P = 1.00 atm = 101.325 kPa .

The distance from the liquid benzene meniscus to the open top of the tube is fixed at z = 0.150 m z = 0.150\text{ m} z = 0.150 m ( 15.0 cm 15.0\text{ cm} 15.0 cm ). Dry air ( B B B , insoluble in liquid benzene) flows continuously across the top of the tube at high velocity such that the partial pressure of benzene at the tube exit is effectively zero.

Given Physical Data at 25.0 ∘ C 25.0^\circ\text{C} 25. 0 ∘ C :

Vapor pressure of benzene: P A ∗ = 100.0 mmHg = 13.332 kPa = 0.13158 atm P_A^* = 100.0\text{ mmHg} = 13.332\text{ kPa} = 0.13158\text{ atm} P A ∗ ​ = 100.0 mmHg = 13.332 kPa = 0.13158 atm .

Binary gas diffusivity of benzene in air: D A B = 8.80 × 10 − 6 m 2 / s D_{AB} = 8.80 \times 10^{-6}\text{ m}^2/\text{s} D A B ​ = 8.80 × 1 0 − 6 m 2 / s .

Universal gas constant: R = 8.31446 J/(mol ⋅ K) = 8.31446 Pa ⋅ m 3 / ( mol ⋅ K ) R = 8.31446\text{ J/(mol}\cdot\text{K)} = 8.31446\text{ Pa}\cdot\text{m}^3/(\text{mol}\cdot\text{K}) R = 8.31446 J/(mol ⋅ K) = 8.31446 Pa ⋅ m 3 / ( mol ⋅ K ) .

Calculate:

The partial pressures of air at the liquid interface ( p B 1 p_{B1} p B 1 ​ ) and at the tube exit ( p B 2 p_{B2} p B 2 ​ ).

The log-mean partial pressure of air ( p B , l m p_{B,lm} p B , l m ​ ) and the Stefan drift enhancement factor ( P / p B , l m P / p_{B,lm} P / p B , l m ​ ).

The steady-state evaporative molar flux of benzene ( N A N_A N A ​ ) in mol/(m 2 ⋅ s) \text{mol/(m}^2\cdot\text{s)} mol/(m 2 ⋅ s) .

The molar flux that would occur if equimolar counterdiffusion prevailed ( N A , EMCD N_{A,\text{EMCD}} N A , EMCD ​ ), and the percentage increase attributable to bulk drift.

The areal mass loss rate of benzene in kg/(m 2 ⋅ hr) \text{kg/(m}^2\cdot\text{hr)} kg/(m 2 ⋅ hr) .

Step 1: Boundary Partial Pressures

At the liquid meniscus ( z = 0 z = 0 z = 0 ):

Benzene is in thermodynamic phase equilibrium with its pure liquid: p A 1 = P A ∗ = 13 , 332.2 Pa = 0.13158 atm p_{A1} = P_A^* = 13,332.2\text{ Pa} = 0.13158\text{ atm} p A 1 ​ = P A ∗ ​ = 13 , 332.2 Pa = 0.13158 atm

Air partial pressure is determined by Dalton's Law: p B 1 = P − p A 1 = 101 , 325 Pa − 13 , 332.2 Pa = 87 , 992.8 Pa = 0.86842 atm p_{B1} = P - p_{A1} = 101,325\text{ Pa} - 13,332.2\text{ Pa} = \mathbf{87,992.8\text{ Pa}} = 0.86842\text{ atm} p B 1 ​ = P − p A 1 ​ = 101 , 325 Pa − 13 , 332.2 Pa = 87 , 992.8 Pa = 0.86842 atm

At the open tube exit ( z = 0.150 m z = 0.150\text{ m} z = 0.150 m ):

Air sweep strips benzene completely: p A 2 = 0.0 Pa p_{A2} = 0.0\text{ Pa} p A 2 ​ = 0.0 Pa

Air partial pressure equals total pressure: p B 2 = P − p A 2 = 101 , 325.0 Pa = 1.0000 atm p_{B2} = P - p_{A2} = \mathbf{101,325.0\text{ Pa}} = 1.0000\text{ atm} p B 2 ​ = P − p A 2 ​ = 101 , 325.0 Pa = 1.0000 atm

Step 2: Log-Mean Partial Pressure and Stefan Drift Factor

Evaluating the logarithmic mean of the stagnant carrier gas: p B , l m = p B 2 − p B 1 ln ⁡ ( p B 2 / p B 1 ) = 101 , 325.0 − 87 , 992.8 ln ⁡ ( 101 , 325.0 / 87 , 992.8 ) p_{B,lm} = \frac{p_{B2} - p_{B1}}{\ln(p_{B2} / p_{B1})} = \frac{101,325.0 - 87,992.8}{\ln(101,325.0 / 87,992.8)} p B , l m ​ = ln ( p B 2 ​ / p B 1 ​ ) p B 2 ​ − p B 1 ​ ​ = ln ( 101 , 325.0/87 , 992.8 ) 101 , 325.0 − 87 , 992.8 ​ p B 2 p B 1 = 101 , 325.0 87 , 992.8 = 1.151515 \frac{p_{B2}}{p_{B1}} = \frac{101,325.0}{87,992.8} = 1.151515 p B 1 ​ p B 2 ​ ​ = 87 , 992.8 101 , 325.0 ​ = 1.151515 ln ⁡ ( 1.151515 ) = 0.141072 \ln(1.151515) = 0.141072 ln ( 1.151515 ) = 0.141072 p B , l m = 13 , 332.2 Pa 0.141072 = 94 , 506.5 Pa = 0.93271 atm p_{B,lm} = \frac{13,332.2\text{ Pa}}{0.141072} = \mathbf{94,506.5\text{ Pa}} = 0.93271\text{ atm} p B , l m ​ = 0.141072 13 , 332.2 Pa ​ = 94 , 506.5 Pa = 0.93271 atm

The Stefan drift enhancement factor is: P p B , l m = 101 , 325.0 Pa 94 , 506.5 Pa = 1.07215 ≈ 1.072 \frac{P}{p_{B,lm}} = \frac{101,325.0\text{ Pa}}{94,506.5\text{ Pa}} = \mathbf{1.07215} \approx \mathbf{1.072} p B , l m ​ P ​ = 94 , 506.5 Pa 101 , 325.0 Pa ​ = 1.07215 ≈ 1.072

Bulk convective flow enhances diffusion by 7.22 % 7.22\% 7.22% above pure molecular diffusion.

Step 3: Evaporative Molar Flux Calculation

Using the stagnant diffusion formula: N A = D A B P R T z p B , l m ( p A 1 − p A 2 ) N_A = \frac{D_{AB} P}{R T z p_{B,lm}} (p_{A1} - p_{A2}) N A ​ = RT z p B , l m ​ D A B ​ P ​ ( p A 1 ​ − p A 2 ​ )

Evaluate the product R T z R T z RT z : R T z = ( 8.31446 Pa ⋅ m 3 / ( mol ⋅ K ) ) × ( 298.15 K ) × ( 0.150 m ) R T z = (8.31446\text{ Pa}\cdot\text{m}^3/(\text{mol}\cdot\text{K})) \times (298.15\text{ K}) \times (0.150\text{ m}) RT z = ( 8.31446 Pa ⋅ m 3 / ( mol ⋅ K )) × ( 298.15 K ) × ( 0.150 m ) R T z = 2 , 478.96 × 0.150 = 371.843 Pa ⋅ m 4 / mol R T z = 2,478.96 \times 0.150 = 371.843\text{ Pa}\cdot\text{m}^4/\text{mol} RT z = 2 , 478.96 × 0.150 = 371.843 Pa ⋅ m 4 / mol

Substitute all values in consistent SI units: N A = ( 8.80 × 10 − 6 m 2 / s ) × ( 101 , 325 Pa ) ( 371.843 Pa ⋅ m 4 / mol ) × ( 94 , 506.5 Pa ) × ( 13 , 332.2 Pa − 0 ) N_A = \frac{(8.80 \times 10^{-6}\text{ m}^2/\text{s}) \times (101,325\text{ Pa})}{(371.843\text{ Pa}\cdot\text{m}^4/\text{mol}) \times (94,506.5\text{ Pa})} \times (13,332.2\text{ Pa} - 0) N A ​ = ( 371.843 Pa ⋅ m 4 / mol ) × ( 94 , 506.5 Pa ) ( 8.80 × 1 0 − 6 m 2 / s ) × ( 101 , 325 Pa ) ​ × ( 13 , 332.2 Pa − 0 ) N A = 0.89166 ( 371.843 ) × ( 94 , 506.5 ) × 13 , 332.2 = 0.89166 × 13 , 332.2 35 , 141 , 600 N_A = \frac{0.89166}{(371.843) \times (94,506.5)} \times 13,332.2 = \frac{0.89166 \times 13,332.2}{35,141,600} N A ​ = ( 371.843 ) × ( 94 , 506.5 ) 0.89166 ​ × 13 , 332.2 = 35 , 141 , 600 0.89166 × 13 , 332.2 ​ N A = 11 , 887.8 35 , 141 , 600 = 3.3828 × 10 − 4 mol/(m 2 ⋅ s) = 0.3383 mmol/(m 2 ⋅ s) N_A = \frac{11,887.8}{35,141,600} = \mathbf{3.3828 \times 10^{-4}\text{ mol/(m}^2\cdot\text{s)}} = \mathbf{0.3383\text{ mmol/(m}^2\cdot\text{s)}} N A ​ = 35 , 141 , 600 11 , 887.8 ​ = 3.3828 × 1 0 − 4 mol/(m 2 ⋅ s) = 0.3383 mmol/(m 2 ⋅ s)

Step 4: Comparison to Equimolar Counterdiffusion (EMCD)

If equimolar counterdiffusion were incorrectly assumed: N A , EMCD = D A B R T z ( p A 1 − p A 2 ) = 8.80 × 10 − 6 371.843 × 13 , 332.2 = 3.1552 × 10 − 4 mol/(m 2 ⋅ s) N_{A,\text{EMCD}} = \frac{D_{AB}}{R T z} (p_{A1} - p_{A2}) = \frac{8.80 \times 10^{-6}}{371.843} \times 13,332.2 = \mathbf{3.1552 \times 10^{-4}\text{ mol/(m}^2\cdot\text{s)}} N A , EMCD ​ = RT z D A B ​ ​ ( p A 1 ​ − p A 2 ​ ) = 371.843 8.80 × 1 0 − 6 ​ × 13 , 332.2 = 3.1552 × 1 0 − 4 mol/(m 2 ⋅ s)

Ratio verification: N A N A , EMCD = 3.3828 × 10 − 4 3.1552 × 10 − 4 = 1.0721 = P p B , l m \frac{N_A}{N_{A,\text{EMCD}}} = \frac{3.3828 \times 10^{-4}}{3.1552 \times 10^{-4}} = \mathbf{1.0721} = \frac{P}{p_{B,lm}} N A , EMCD ​ N A ​ ​ = 3.1552 × 1 0 − 4 3.3828 × 1 0 − 4 ​ = 1.0721 = p B , l m ​ P ​

Step 5: Areal Mass Loss Rate of Benzene

Convert molar flux to hourly mass emission rate per unit area: m ˙ A ′ ′ = N A ⋅ M A = ( 3.3828 × 10 − 4 mol/(m 2 ⋅ s) ) × ( 78.11 g/mol ) = 0.026423 g/(m 2 ⋅ s) \dot{m}_A'' = N_A \cdot M_A = (3.3828 \times 10^{-4}\text{ mol/(m}^2\cdot\text{s)}) \times (78.11\text{ g/mol}) = 0.026423\text{ g/(m}^2\cdot\text{s)} m ˙ A ′′ ​ = N A ​ ⋅ M A ​ = ( 3.3828 × 1 0 − 4 mol/(m 2 ⋅ s) ) × ( 78.11 g/mol ) = 0.026423 g/(m 2 ⋅ s) m ˙ A ′ ′ = 0.026423 g/(m 2 ⋅ s) × 3 , 600 s 1 hr × 1 kg 1 , 000 g = 0.09512 kg/(m 2 ⋅ hr) \dot{m}_A'' = 0.026423\text{ g/(m}^2\cdot\text{s)} \times \frac{3,600\text{ s}}{1\text{ hr}} \times \frac{1\text{ kg}}{1,000\text{ g}} = \mathbf{0.09512\text{ kg/(m}^2\cdot\text{hr)}} m ˙ A ′′ ​ = 0.026423 g/(m 2 ⋅ s) × 1 hr 3 , 600 s ​ × 1 , 000 g 1 kg ​ = 0.09512 kg/(m 2 ⋅ hr)

  • 8. Critical NCEES PE Exam Traps & Pitfalls
  • Trap 1: Omitting the P / p B , l m P / p_{B,lm} P / p B , l m ​ Factor in Evaporator and Scrubber Sizing

Whenever an exam question describes evaporation of a liquid into a gas blanket or absorption of a solute from an inert carrier (such as air, N 2 \text{N}_2 N 2 ​ , or methane), the non-volatile/insoluble gas is stagnant ( N B = 0 N_B = 0 N B ​ = 0 ). Neglecting the log-mean factor P / p B , l m P / p_{B,lm} P / p B , l m ​ underpredicts mass flux by 5 % 5\% 5% to 50 % 50\% 50% depending on solute concentration. Always check whether N B = − N A N_B = -N_A N B ​ = − N A ​ (EMCD) or N B = 0 N_B = 0 N B ​ = 0 (stagnant B B B ).

Trap 2: Incorrect Temperature and Pressure Scaling of Diffusivities

Candidates frequently confuse the scaling of gas versus liquid diffusivities:

Gas Diffusivity: D A B ∝ T 1.75 / P D_{AB} \propto T^{1.75} / P D A B ​ ∝ T 1.75 / P . Doubling the absolute pressure halves the gas diffusivity ( D A B ∝ 1 / P D_{AB} \propto 1/P D A B ​ ∝ 1/ P ).

Liquid Diffusivity: D A B ∝ T / μ B D_{AB} \propto T / \mu_B D A B ​ ∝ T / μ B ​ . Moderately increasing total pressure from 1 bar 1\text{ bar} 1 bar to 10 bar 10\text{ bar} 10 bar has zero effect on liquid diffusivity because liquids are incompressible, but temperature changes dramatically alter diffusivity via solvent viscosity μ ( T ) \mu(T) μ ( T ) .

Trap 3: Confusing Diffusive Flux ( J A ∗ J_A^* J A ∗ ​ ) with Total Absolute Flux ( N A N_A N A ​ )

J A ∗ J_A^* J A ∗ ​ is defined relative to the mixture's moving molar-average velocity ( v ∗ v^* v ∗ ), whereas N A N_A N A ​ is measured relative to stationary apparatus walls. On the PE exam, equipment mass balances always require the absolute flux N A N_A N A ​ . The two are identical only in Equimolar Counterdiffusion ( N A + N B = 0 N_A + N_B = 0 N A ​ + N B ​ = 0 ) or in infinitely dilute solutions ( x A → 0 x_A \to 0 x A ​ → 0 ).