Study guide

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting

PE Chemical Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the PE Chemical Exam How to Use This Guide and the NCEES Handbook

2 Chapter 1: Material Balances & Flowsheet Calculations

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting 1.2 Steady-State Material Balances (Reactive & Non-Reactive Systems) 1.3 Recycle, Bypass, and Purge Operations

3 Chapter 2: Energy Balances & Thermochemistry

2.1 Enthalpy Accounting, Sensible Heat, and Phase Changes 2.2 Heats of Reaction, Formation, and Adiabatic Flame Temperatures 2.3 Unsteady-State Mass and Energy Balances

4 Chapter 3: Fluid Statics & Incompressible Pipe Flow

3.1 Fluid Statics, Pressure Measurement, and Manometry 3.2 Incompressible Flow, Friction Factors, and the Moody Diagram 3.3 Minor Losses, Equivalent Length, and Piping Networks 3.4 Pumps, Compressors, and NPSH Calculations

5 Chapter 4: Advanced Fluid Dynamics & Compressible Flow

4.1 Compressible Gas Flow, Sonic Velocity, and Choked Flow 4.2 Flow Measurement Devices (Orifices, Venturis, Rotameters) 4.3 Multiphase Flow and Fluidization Principles 4.4 Mixing, Agitation, and Agitator Scale-Up

6 Chapter 5: Thermodynamic Laws & Fundamental Relations

5.1 First and Second Laws, Heat Engines, and Carnot Efficiency 5.2 Entropy, Availability, and Exergy Analysis 5.3 Fundamental Property Relations and Maxwell Equations

7 Chapter 6: Real Gases & Equations of State

6.1 Volumetric Properties and Compressibility Factor Charts 6.2 Cubic Equations of State (vdW, RK, SRK, and Peng-Robinson) 6.3 Residual Properties and Enthalpy/Entropy Departure Functions

8 Chapter 7: Phase & Chemical Reaction Equilibria

7.1 Pure Component Vapor Pressure and Phase Equilibria 7.2 Vapor-Liquid Equilibrium (VLE), Raoult's Law, and Activity Coefficients 7.3 Chemical Reaction Equilibria and Equilibrium Constant Calculation

9 Chapter 8: Heat Transfer Mechanisms & Conduction

8.1 Steady-State Conduction in Planar, Cylindrical, and Spherical Geometries 8.2 Convective Heat Transfer and Dimensionless Correlations 8.3 Thermal Radiation, Emissivity, and Surface Radiation Exchange

10 Chapter 9: Heat Exchanger Design & Phase Change

9.1 Shell-and-Tube Exchanger Design, TEMA Standards, and LMTD 9.2 Effectiveness-NTU Method and Exchanger Rating 9.3 Boiling Regimes, Condensation Phenomena, and Fouling Resistances

11 Chapter 10: Mass Transfer Fundamentals & Diffusion

10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion 10.2 Convective Mass Transfer and Film Theories 10.3 Mass Transfer Dimensionless Numbers (Sherwood, Schmidt, Peclet)

12 Chapter 11: Distillation Operations

11.1 Vapor-Liquid Equilibrium and Relative Volatility in Distillation 11.2 McCabe-Thiele Method for Binary Distillation 11.3 Packed vs Tray Columns, Flooding, and Tray Hydraulics 11.4 Multicomponent Distillation Fundamentals and Key Components

13 Chapter 12: Rate-Controlled & Equilibrium Separations

12.1 Gas Absorption, Stripping, and the Kremser Equation 12.2 Liquid-Liquid Extraction and Ternary Phase Equilibria 12.3 Adsorption, Membrane Separations, and Drying Operations 12.4 Filtration, Crystallization, and Solid-Fluid Separations

14 Chapter 13: Chemical Kinetics & Ideal Isothermal Reactors

13.1 Reaction Rates, Rate Laws, and Order of Reaction 13.2 Temperature Dependence and the Arrhenius Equation 13.3 Batch Reactors and Continuous Stirred-Tank Reactors (CSTR) 13.4 Plug Flow Reactors (PFR) and Reactor Combinations

15 Chapter 14: Non-Ideal Flow, Non-Isothermal Reactors & Catalysis

14.1 Yield, Selectivity, and Multiple Reactions (Series and Parallel) 14.2 Non-Isothermal Reactor Design and Thermal Runaway 14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models

16 Chapter 15: Physical & Transport Properties of Fluids

15.1 Fluid Density, Specific Gravity, and Viscosity Correlations 15.2 Thermal Conductivity and Specific Heat Capacities 15.3 Estimation Methods and Corresponding States Principles

17 Chapter 16: Materials of Construction & Corrosion

16.1 Mechanical Properties and Materials Selection in Chemical Plants 16.2 Corrosion Mechanisms, Materials Degradation, and Prevention

18 Chapter 17: Process Safety & Pressure Relief Systems

17.1 Hazard Identification Methodologies (HAZOP, FMEA, What-If) 17.2 Pressure Relief Valve (PRV) and Rupture Disk Sizing 17.3 Flammability, Explosions, and Toxic Dispersion Limits 17.4 Inerting, Purging, Discharge Location, and Containment

19 Chapter 18: Process Control & Engineering Economics

18.1 Process Dynamics and Feedback Control Loops 18.2 PID Controller Tuning and Loop Stability 18.3 Chemical Plant Capital Cost Estimation and Profitability Analysis 18.4 Field Instrumentation, Control Valves, Alarms, and Safety Instrumented Systems

20 Chapter 19: Process Design, Equipment Selection & Environmental Compliance

19.1 Process Flow Diagrams, P&IDs, Scale-Up, and Plant Siting 19.2 Process Equipment Selection, Sizing, and Optimization 19.3 Emissions Evaluation, Mitigation, and Remediation

21 Chapter 20: Plant Operation, Reliability & Continuous Improvement

20.1 Operating Procedures, Startup, and Shutdown 20.2 Mechanical Integrity, Reliability, and Failure Mechanisms 20.3 Debottlenecking, Optimization, and Troubleshooting

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting

Key Takeaways Explain This Topic AI

Degree-of-freedom analysis establishes mathematical solvability before writing equations: N_DF = N_v - N_e = 0 is uniquely solvable, N_DF > 0 is underspecified, and N_DF < 0 is overspecified.

For a non-reactive physical unit operation with C chemical species, exactly C independent material balance equations can be formulated; adding the overall total mass balance produces a linearly dependent equation.

A physical stream splitter dividing 1 inlet into S exit streams with C components provides only 1 independent material balance and (S - 1)(C - 1) composition equalities because all streams share identical intensive compositions.

Sum of mole fractions (sum x_i = 1) or mass fractions (sum w_i = 1) yields 1 constraint per stream; using component molar flow rates (n_i) as primary variables eliminates summation constraints entirely.

In multi-unit chemical flowsheets, solving the overall process boundary envelope first (N_DF = 0) calculates terminal streams and systematically unzips internal units by reducing their local degrees of freedom.

Last updated: September 2026

1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting

On the computer-based NCEES PE Chemical Exam , material and energy balances represent the highest-frequency foundation across all process engineering specifications. Attempting to formulate simultaneous algebraic balances on a complex flowsheet without first performing a degree-of-freedom analysis ( N D F N_{DF} N D F ​ ) is the primary reason candidates run out of time. A systematic degrees-of-freedom audit determines whether a process unit or flowsheet has sufficient independent constraints to be solved, identifies the required sequence of calculations, and prevents wasting valuable exam minutes on ill-conditioned or redundant equations.

The Universal Conservation Law

All macroscopic material balance accounting derives from the fundamental conservation principle applied across a defined control volume: Accumulation = Input − Output + Generation − Consumption \text{Accumulation} = \text{Input} - \text{Output} + \text{Generation} - \text{Consumption} Accumulation = Input − Output + Generation − Consumption

For systems operating at steady state , system properties do not change with time ( d M / d t = 0 dM/dt = 0 d M / d t = 0 ), reducing the balance to: Input + Generation = Output + Consumption \text{Input} + \text{Generation} = \text{Output} + \text{Consumption} Input + Generation = Output + Consumption

In non-reactive systems, no chemical bonds are formed or broken; hence, generation and consumption terms are zero, yielding the direct conservation statement for total mass and each individual molecular species: Input i = Output i \text{Input}_i = \text{Output}_i Input i ​ = Output i ​

Mathematical Architecture of Degree-of-Freedom ( N D F N_{DF} N D F ​ ) Analysis

The degrees of freedom of a process system represent the number of unknown variables that must be independently specified before the remaining system parameters can be calculated. The governing balance relationship is: N D F = N v − N e N_{DF} = N_v - N_e N D F ​ = N v ​ − N e ​

Where:

N v N_v N v ​ (Total Unknown Variables) : The total count of unknown stream variables (such as total stream flow rates F j F_j F j ​ and independent stream compositions x i j x_{ij} x ij ​ , or component flow rates n i j n_{ij} n ij ​ ).

N e N_e N e ​ (Total Independent Equations & Constraints) : The sum of all independent material balances, physical specifications, process relations, and thermodynamic equilibrium constraints. N e = N M B + N s p e c + N r e l + N s u m N_e = N_{MB} + N_{spec} + N_{rel} + N_{sum} N e ​ = N MB ​ + N s p ec ​ + N re l ​ + N s u m ​

Outcome Mathematical Meaning Engineering Consequence on PE Exam

N D F = 0 N_{DF} = 0 N D F ​ = 0 Exactly Specified A unique mathematical solution exists. Formulate the N e N_e N e ​ independent equations and solve directly.

N D F > 0 N_{DF} > 0 N D F ​ > 0 Underspecified Infinite solutions exist. More unknowns exist than equations. You must locate additional given information in the problem statement or select an arbitrary basis of calculation (e.g., 100 lbmol/h 100\text{ lbmol/h} 100 lbmol/h ).

N D F < 0 N_{DF} < 0 N D F ​ < 0 Overspecified The system has more equations than unknowns. Specifications are likely redundant or physically contradictory. Check whether you counted a dependent material balance.

Variable Formulation: Stream Variables vs. Component Flow Rates

Candidates can formulate unknown stream variables in two mathematically equivalent ways:

Stream Flow and Mole Fraction Basis : For every stream j j j containing C C C components, define 1 total flow rate F j F_j F j ​ and ( C − 1 ) (C - 1) ( C − 1 ) independent mole fractions x i j x_{ij} x ij ​ . The last mole fraction is determined by the constraint ∑ i = 1 C x i j = 1 \sum_{i=1}^C x_{ij} = 1 ∑ i = 1 C ​ x ij ​ = 1 . Total variables per stream = C C C .

Component Flow Rate Basis ( n i j n_{ij} n ij ​ ) : Directly define the molar flow rate of each component i i i in stream j j j ( n i j = F j x i j n_{ij} = F_j x_{ij} n ij ​ = F j ​ x ij ​ ). Total variables per stream = C C C . Under this formulation, summation constraints are automatically embedded, eliminating the need to write separate ∑ x i j = 1 \sum x_{ij} = 1 ∑ x ij ​ = 1 equations.

Independent Equations & Constraints Across Unit Operations

For a non-reactive process unit processing C C C chemical species:

Independent Material Balances ( N M B N_{MB} N MB ​ ) : Exactly C C C independent material balances can be written. You may choose either C C C component balances, or ( C − 1 ) (C - 1) ( C − 1 ) component balances plus 1 overall mass balance. Writing all C C C component balances plus the overall balance generates a linearly dependent equation set.

Process Specifications ( N s p e c N_{spec} N s p ec ​ ) : Explicit numerical values provided in the exam prompt (e.g., feed flow rate = 10 , 000 lb/h 10,000\text{ lb/h} 10 , 000 lb/h , distillate purity = 99.5 mol% 99.5\text{ mol\%} 99.5 mol% ).

Process Relations ( N r e l N_{rel} N re l ​ ) : Physical or contractual constraints linking variables, such as split ratios, fractional recoveries, phase equilibrium constraints ( y i = K i x i y_i = K_i x_i y i ​ = K i ​ x i ​ ), stoichiometric ratios, or specified reflux ratios.

Summary Table: Degrees-of-Freedom Characteristics for Common Equipment

Unit Operation Unknowns ( N v N_v N v ​ ) Independent Balances ( N M B N_{MB} N MB ​ ) Performance Relations ( N r e l N_{rel} N re l ​ ) Critical PE Exam Rule

Mixer / Blender Sum of all stream variables across inlets + outlet C C C species balances Stream pressure equality All species balances are independent; compositions change between inlet and outlet.

Stream Splitter ( S + 1 ) × C (S + 1) \times C ( S + 1 ) × C variables ( 1 1 1 inlet, S S S outlets) 1 overall mass balance ( S − 1 ) ( C − 1 ) (S - 1)(C - 1) ( S − 1 ) ( C − 1 ) composition equalities No separation occurs. Compositions of all exit streams equal feed composition. Only 1 independent material balance exists!

Separator / Column Feed + Overhead + Bottoms variables C C C species balances Recovery fractions, split ratios, phase equilibrium Overall balance is dependent if all C C C component balances are written.

Equilibrium Flash Feed + Vapor + Liquid variables C C C species balances y i = K i ( T , P ) x i y_i = K_i(T, P) x_i y i ​ = K i ​ ( T , P ) x i ​ for each component, T T T and P P P specs Must incorporate phase equilibrium K K K -values and temperature/pressure constraints.

Chemical Reactor Inlet + Outlet variables + reaction extents ( ξ r \xi_r ξ r ​ ) C C C species balances (or atomic balances) Fractional conversion X A X_A X A ​ , selectivity, equilibrium constant K e q K_{eq} K e q ​ Generation/consumption terms introduce reaction extents ξ r \xi_r ξ r ​ as additional unknowns.

The Stream Splitter Trap: Why Splitters Only Provide 1 Balance

The most frequent degree-of-freedom error on the PE exam involves the stream splitter (a simple tee or distribution manifold). In a physical splitter, a single stream is divided into two or more streams without any change in phase, temperature, or chemical composition.

For a splitter with 1 inlet and 2 exit streams containing C C C components:

Because no separation occurs, the intensive composition of both exit streams is identical to the inlet stream: x i , in = x i , 1 = x i , 2 x_{i, \text{in}} = x_{i, 1} = x_{i, 2} x i , in ​ = x i , 1 ​ = x i , 2 ​ for all components i = 1 , … , C i = 1, \dots, C i = 1 , … , C .

If you attempt to write a component balance: F in x i , in = F 1 x i , 1 + F 2 x i , 2 F_{\text{in}} x_{i, \text{in}} = F_1 x_{i, 1} + F_2 x_{i, 2} F in ​ x i , in ​ = F 1 ​ x i , 1 ​ + F 2 ​ x i , 2 ​

Substituting x i , 1 = x i , in x_{i, 1} = x_{i, \text{in}} x i , 1 ​ = x i , in ​ and x i , 2 = x i , in x_{i, 2} = x_{i, \text{in}} x i , 2 ​ = x i , in ​ yields: F in x i , in = ( F 1 + F 2 ) x i , in ⟹ F in = F 1 + F 2 F_{\text{in}} x_{i, \text{in}} = (F_1 + F_2) x_{i, \text{in}} \implies F_{\text{in}} = F_1 + F_2 F in ​ x i , in ​ = ( F 1 ​ + F 2 ​ ) x i , in ​ ⟹ F in ​ = F 1 ​ + F 2 ​

Every component balance degenerates into the identical overall total mass balance! Therefore, a stream splitter provides only 1 independent material balance equation , along with ( S − 1 ) ( C − 1 ) (S - 1)(C - 1) ( S − 1 ) ( C − 1 ) composition equality constraints. Counting C C C independent material balances on a splitter will falsely show N D F < 0 N_{DF} < 0 N D F ​ < 0 .

Subsystem Accounting & The Flowsheet "Unzipping" Strategy

Complex chemical flowsheets consist of interconnected networks of units. When faced with a multi-unit problem, evaluate degrees of freedom across four hierarchical control boundaries:

Individual Unit Operations : Draw a tight control envelope around each piece of equipment.

Mixer / Splitter Junctions : Draw envelopes around stream convergence and divergence nodes.

Subsystem Envelopes : Group multiple units together, treating internal connecting streams as internal variables.

Overall Process Boundary : Enclose the entire plant. Only streams entering or leaving the plant across the global battery limits are counted.

Tip

The PE Flowsheet Unzipping Strategy:

Calculate N D F N_{DF} N D F ​ for each individual unit operation.

If one unit has N D F = 0 N_{DF} = 0 N D F ​ = 0 , solve that unit immediately. Its calculated exit streams become known inlet values for adjacent units, reducing their degrees of freedom.

If no individual unit has N D F = 0 N_{DF} = 0 N D F ​ = 0 , evaluate the Overall Process Boundary . In the vast majority of PE exam problems, the overall plant envelope has N D F = 0 N_{DF} = 0 N D F ​ = 0 ! Solving the overall envelope first determines external product, purge, and waste streams, which immediately "unzips" the interior units.

Tie Components: The PE Calculation Shortcut

A tie component is a chemical species that enters the system in a single stream and leaves in a single stream without reacting or distributing into secondary phases. m ˙ tie, in = m ˙ tie, out ⟹ F in w tie, in = F out w tie, out \dot{m}_{\text{tie, in}} = \dot{m}_{\text{tie, out}} \implies F_{\text{in}} w_{\text{tie, in}} = F_{\text{out}} w_{\text{tie, out}} m ˙ tie, in ​ = m ˙ tie, out ​ ⟹ F in ​ w tie, in ​ = F out ​ w tie, out ​

Identifying a tie component allows you to instantly solve for an unknown stream flow rate with a single algebraic step, bypassing the need to solve simultaneous linear equations: F out = F in ( w tie, in w tie, out ) F_{\text{out}} = F_{\text{in}} \left( \frac{w_{\text{tie, in}}}{w_{\text{tie, out}}} \right) F out ​ = F in ​ ( w tie, out ​ w tie, in ​ ​ )

Typical tie components on the PE exam include:

Nitrogen ( N 2 N_2 N 2 ​ ) in combustion air and flue gas.

Non-volatile dissolved mineral salts in evaporators and crystallizers.

Insoluble catalysts or carrier liquids in extraction columns.

Heavy inert hydrocarbons in gas stripping absorbers.

  • Comprehensive Worked Example: Evaporation & Crystallization Flowsheet
  • Problem Statement

An aqueous solution of potassium sulfate ( K 2 SO 4 \text{K}_2\text{SO}_4 K 2 ​ SO 4 ​ ) at 40 ∘ C 40^\circ\text{C} 4 0 ∘ C containing 15.0 wt% K 2 SO 4 15.0\text{ wt\% }\text{K}_2\text{SO}_4 15.0 wt% K 2 ​ SO 4 ​ is fed to a continuous two-stage processing plant at a rate of 10 , 000 lb/h 10,000\text{ lb/h} 10 , 000 lb/h (Stream 1).

The feed enters a continuous vacuum evaporator , where pure water vapor is boiled off overhead (Stream 2) to concentrate the solution to 40.0 wt% K 2 SO 4 40.0\text{ wt\% }\text{K}_2\text{SO}_4 40.0 wt% K 2 ​ SO 4 ​ (Stream 3).

Stream 3 enters a chilled crystallizer-filter unit operating at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C . The solubility of K 2 SO 4 \text{K}_2\text{SO}_4 K 2 ​ SO 4 ​ at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C is 10.0 wt% K 2 SO 4 10.0\text{ wt\% }\text{K}_2\text{SO}_4 10.0 wt% K 2 ​ SO 4 ​ (i.e., saturated solution is 10.0 wt% salt and 90.0 wt% water).

The crystallizer-filter produces two exit streams:

Filtrate (Stream 5): Saturated liquid mother liquor ( 10.0 wt% K 2 SO 4 10.0\text{ wt\% }\text{K}_2\text{SO}_4 10.0 wt% K 2 ​ SO 4 ​ ).

Wet Filter Cake (Stream 4): Solid K 2 SO 4 \text{K}_2\text{SO}_4 K 2 ​ SO 4 ​ crystals plus adhering mother liquor. The wet cake consists of 90.0 wt% 90.0\text{ wt\%} 90.0 wt% pure solid K 2 SO 4 \text{K}_2\text{SO}_4 K 2 ​ SO 4 ​ crystals and 10.0 wt% 10.0\text{ wt\%} 10.0 wt% entrained saturated mother liquor.

Calculate:

Perform a formal degree-of-freedom analysis on the Evaporator, Crystallizer-Filter, and Overall System.

Calculate the evaporation rate of water in Stream 2 (lb/h).

Calculate the mass production rate of wet filter cake in Stream 4 (lb/h) and the recovery percentage of pure solid K 2 SO 4 \text{K}_2\text{SO}_4 K 2 ​ SO 4 ​ crystals.

Step 1: Stream Definitions and Compositions

Components : Two chemical species ( C = 2 C = 2 C = 2 ): Potassium Sulfate (Salt, S S S ) and Water ( W W W ).

Stream 1 (Feed) : F 1 = 10 , 000 lb/h F_1 = 10,000\text{ lb/h} F 1 ​ = 10 , 000 lb/h , w 1 , S = 0.150 w_{1,S} = 0.150 w 1 , S ​ = 0.150 , w 1 , W = 0.850 w_{1,W} = 0.850 w 1 , W ​ = 0.850 .

Stream 2 (Overhead Vapor) : V 2 = ? V_2 = ? V 2 ​ = ? , w 2 , S = 0.000 w_{2,S} = 0.000 w 2 , S ​ = 0.000 , w 2 , W = 1.000 w_{2,W} = 1.000 w 2 , W ​ = 1.000 (pure water).

Stream 3 (Evaporator Liquor) : L 3 = ? L_3 = ? L 3 ​ = ? , w 3 , S = 0.400 w_{3,S} = 0.400 w 3 , S ​ = 0.400 , w 3 , W = 0.600 w_{3,W} = 0.600 w 3 , W ​ = 0.600 .

Stream 5 (Filtrate Mother Liquor) : M 5 = ? M_5 = ? M 5 ​ = ? , w 5 , S = 0.100 w_{5,S} = 0.100 w 5 , S ​ = 0.100 , w 5 , W = 0.900 w_{5,W} = 0.900 w 5 , W ​ = 0.900 .

Stream 4 (Wet Cake) : C 4 = ? C_4 = ? C 4 ​ = ? .

Solid crystal fraction = 0.900 (pure S S S ).

Entrained solution fraction = 0.100 containing 10.0 wt% S S S and 90.0 wt% W W W .

Total salt weight fraction in wet cake: w 4 , S = 0.900 + ( 0.100 × 0.100 ) = 0.900 + 0.010 = 0.910 (91.0 wt% Salt) w_{4,S} = 0.900 + (0.100 \times 0.100) = 0.900 + 0.010 = 0.910\text{ (91.0 wt\% Salt)} w 4 , S ​ = 0.900 + ( 0.100 × 0.100 ) = 0.900 + 0.010 = 0.910 (91.0 wt% Salt)

Total water weight fraction in wet cake: w 4 , W = 0.100 × 0.900 = 0.090 (9.0 wt% Water) w_{4,W} = 0.100 \times 0.900 = 0.090\text{ (9.0 wt\% Water)} w 4 , W ​ = 0.100 × 0.900 = 0.090 (9.0 wt% Water)

Step 2: Degree-of-Freedom Analysis Table

Accounting Item Evaporator Crystallizer-Filter Overall System

Unknown Variables ( N v N_v N v ​ ) 2 ( V 2 , L 3 V_2, L_3 V 2 ​ , L 3 ​ ) 3 ( L 3 , C 4 , M 5 L_3, C_4, M_5 L 3 ​ , C 4 ​ , M 5 ​ ) 3 ( V 2 , C 4 , M 5 V_2, C_4, M_5 V 2 ​ , C 4 ​ , M 5 ​ )

  • Independent Balances ( N M B N_{MB} N MB ​ ) 2 (Salt, Water) 2 (Salt, Water) 2 (Salt, Water)
  • Specifications & Relations ( N r e l N_{rel} N re l ​ ) 0 0 0

Degrees of Freedom ( N D F N_{DF} N D F ​ ) 2 − 2 = 0 2 - 2 = 0 2 − 2 = 0 3 − 2 = + 1 3 - 2 = +1 3 − 2 = + 1 3 − 2 = + 1 3 - 2 = +1 3 − 2 = + 1

Solvability Status Solvable Now Must wait for L 3 L_3 L 3 ​ Must wait for V 2 V_2 V 2 ​

Strategic Takeaway : The Evaporator has N D F = 0 N_{DF} = 0 N D F ​ = 0 . Solving the Evaporator first determines L 3 L_3 L 3 ​ . Once L 3 L_3 L 3 ​ is known, the unknown count for the Crystallizer-Filter drops from 3 to 2 ( C 4 , M 5 C_4, M_5 C 4 ​ , M 5 ​ ), reducing its N D F N_{DF} N D F ​ to 2 − 2 = 0 2 - 2 = 0 2 − 2 = 0 !

Step 3: Evaporator Material Balances

Because Salt is a tie component between Stream 1 and Stream 3 (no salt leaves in vapor Stream 2): Salt In = Salt Out \text{Salt In} = \text{Salt Out} Salt In = Salt Out F 1 w 1 , S = L 3 w 3 , S F_1 w_{1,S} = L_3 w_{3,S} F 1 ​ w 1 , S ​ = L 3 ​ w 3 , S ​ 10 , 000 lb/h × 0.150 = L 3 × 0.400 10,000\text{ lb/h} \times 0.150 = L_3 \times 0.400 10 , 000 lb/h × 0.150 = L 3 ​ × 0.400 1 , 500 lb/h = 0.400 L 3 ⟹ L 3 = 1 , 500 0.400 = 3 , 750 lb/h 1,500\text{ lb/h} = 0.400 L_3 \implies L_3 = \frac{1,500}{0.400} = 3,750\text{ lb/h} 1 , 500 lb/h = 0.400 L 3 ​ ⟹ L 3 ​ = 0.400 1 , 500 ​ = 3 , 750 lb/h

Total mass balance across Evaporator: F 1 = V 2 + L 3 F_1 = V_2 + L_3 F 1 ​ = V 2 ​ + L 3 ​ 10 , 000 lb/h = V 2 + 3 , 750 lb/h ⟹ V 2 = 10 , 000 − 3 , 750 = 6 , 250 lb/h 10,000\text{ lb/h} = V_2 + 3,750\text{ lb/h} \implies V_2 = 10,000 - 3,750 = \mathbf{6,250\text{ lb/h}} 10 , 000 lb/h = V 2 ​ + 3 , 750 lb/h ⟹ V 2 ​ = 10 , 000 − 3 , 750 = 6 , 250 lb/h

Water evaporated overhead is 6,250 lb/h .

Step 4: Crystallizer-Filter Material Balances

Now L 3 = 3 , 750 lb/h L_3 = 3,750\text{ lb/h} L 3 ​ = 3 , 750 lb/h is known. Total mass balance across the Crystallizer-Filter: L 3 = C 4 + M 5 ⟹ M 5 = 3 , 750 − C 4 L_3 = C_4 + M_5 \implies M_5 = 3,750 - C_4 L 3 ​ = C 4 ​ + M 5 ​ ⟹ M 5 ​ = 3 , 750 − C 4 ​

Salt balance across Crystallizer-Filter: L 3 w 3 , S = C 4 w 4 , S + M 5 w 5 , S L_3 w_{3,S} = C_4 w_{4,S} + M_5 w_{5,S} L 3 ​ w 3 , S ​ = C 4 ​ w 4 , S ​ + M 5 ​ w 5 , S ​ 3 , 750 × 0.400 = C 4 ( 0.910 ) + ( 3 , 750 − C 4 ) ( 0.100 ) 3,750 \times 0.400 = C_4 (0.910) + (3,750 - C_4)(0.100) 3 , 750 × 0.400 = C 4 ​ ( 0.910 ) + ( 3 , 750 − C 4 ​ ) ( 0.100 ) 1 , 500 = 0.910 C 4 + 375 − 0.100 C 4 1,500 = 0.910 C_4 + 375 - 0.100 C_4 1 , 500 = 0.910 C 4 ​ + 375 − 0.100 C 4 ​ 1 , 500 − 375 = 0.810 C 4 1,500 - 375 = 0.810 C_4 1 , 500 − 375 = 0.810 C 4 ​ 1 , 125 = 0.810 C 4 ⟹ C 4 = 1 , 125 0.810 = 1 , 388.89 lb/h 1,125 = 0.810 C_4 \implies C_4 = \frac{1,125}{0.810} = \mathbf{1,388.89\text{ lb/h}} 1 , 125 = 0.810 C 4 ​ ⟹ C 4 ​ = 0.810 1 , 125 ​ = 1 , 388.89 lb/h

Filtrate flow rate: M 5 = 3 , 750 − 1 , 388.89 = 2 , 361.11 lb/h M_5 = 3,750 - 1,388.89 = 2,361.11\text{ lb/h} M 5 ​ = 3 , 750 − 1 , 388.89 = 2 , 361.11 lb/h

Step 5: Overall Flowsheet Verification & Crystal Recovery

Overall total mass balance verification: Total Input = F 1 = 10 , 000.00 lb/h \text{Total Input} = F_1 = 10,000.00\text{ lb/h} Total Input = F 1 ​ = 10 , 000.00 lb/h Total Output = V 2 + C 4 + M 5 = 6 , 250.00 + 1 , 388.89 + 2 , 361.11 = 10 , 000.00 lb/h (Exact Closure) \text{Total Output} = V_2 + C_4 + M_5 = 6,250.00 + 1,388.89 + 2,361.11 = 10,000.00\text{ lb/h (Exact Closure)} Total Output = V 2 ​ + C 4 ​ + M 5 ​ = 6 , 250.00 + 1 , 388.89 + 2 , 361.11 = 10 , 000.00 lb/h (Exact Closure)

Overall water balance verification: Water In = 10 , 000 × 0.850 = 8 , 500.00 lb/h \text{Water In} = 10,000 \times 0.850 = 8,500.00\text{ lb/h} Water In = 10 , 000 × 0.850 = 8 , 500.00 lb/h Water Out = 6 , 250.00 + ( 1 , 388.89 × 0.090 ) + ( 2 , 361.11 × 0.900 ) = 6 , 250.00 + 125.00 + 2 , 125.00 = 8 , 500.00 lb/h \text{Water Out} = 6,250.00 + (1,388.89 \times 0.090) + (2,361.11 \times 0.900) = 6,250.00 + 125.00 + 2,125.00 = 8,500.00\text{ lb/h} Water Out = 6 , 250.00 + ( 1 , 388.89 × 0.090 ) + ( 2 , 361.11 × 0.900 ) = 6 , 250.00 + 125.00 + 2 , 125.00 = 8 , 500.00 lb/h

Pure solid K 2 SO 4 \text{K}_2\text{SO}_4 K 2 ​ SO 4 ​ crystals recovered in the filter cake: m ˙ crystals = 0.900 × C 4 = 0.900 × 1 , 388.89 lb/h = 1 , 250.00 lb/h \dot{m}_{\text{crystals}} = 0.900 \times C_4 = 0.900 \times 1,388.89\text{ lb/h} = \mathbf{1,250.00\text{ lb/h}} m ˙ crystals ​ = 0.900 × C 4 ​ = 0.900 × 1 , 388.89 lb/h = 1 , 250.00 lb/h

Percent recovery of salt from the original feed: Recovery % = ( 1 , 250.00 lb/h 1 , 500.00 lb/h ) × 100 % = 83.33 % \text{Recovery \%} = \left( \frac{1,250.00\text{ lb/h}}{1,500.00\text{ lb/h}} \right) \times 100\% = \mathbf{83.33\%} Recovery % = ( 1 , 500.00 lb/h 1 , 250.00 lb/h ​ ) × 100% = 83.33%

The remaining 250.00 lb/h 250.00\text{ lb/h} 250.00 lb/h of salt leaves dissolved in the filtrate ( 2 , 361.11 × 0.100 = 236.11 lb/h 2,361.11 \times 0.100 = 236.11\text{ lb/h} 2 , 361.11 × 0.100 = 236.11 lb/h ) and dissolved in the cake adhering liquid ( 125.00 × ( 0.10 / 0.90 ) = 13.89 lb/h 125.00 \times (0.10/0.90) = 13.89\text{ lb/h} 125.00 × ( 0.10/0.90 ) = 13.89 lb/h ). Total unrecovered salt = 236.11 + 13.89 = 250.00 lb/h 236.11 + 13.89 = 250.00\text{ lb/h} 236.11 + 13.89 = 250.00 lb/h .