Study guide
5.2 Entropy, Availability, and Exergy Analysis
PE Chemical Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
About the PE Chemical Exam How to Use This Guide and the NCEES Handbook
2 Chapter 1: Material Balances & Flowsheet Calculations
1.1 Degree-of-Freedom Analysis & Process Flowsheet Accounting 1.2 Steady-State Material Balances (Reactive & Non-Reactive Systems) 1.3 Recycle, Bypass, and Purge Operations
3 Chapter 2: Energy Balances & Thermochemistry
2.1 Enthalpy Accounting, Sensible Heat, and Phase Changes 2.2 Heats of Reaction, Formation, and Adiabatic Flame Temperatures 2.3 Unsteady-State Mass and Energy Balances
4 Chapter 3: Fluid Statics & Incompressible Pipe Flow
3.1 Fluid Statics, Pressure Measurement, and Manometry 3.2 Incompressible Flow, Friction Factors, and the Moody Diagram 3.3 Minor Losses, Equivalent Length, and Piping Networks 3.4 Pumps, Compressors, and NPSH Calculations
5 Chapter 4: Advanced Fluid Dynamics & Compressible Flow
4.1 Compressible Gas Flow, Sonic Velocity, and Choked Flow 4.2 Flow Measurement Devices (Orifices, Venturis, Rotameters) 4.3 Multiphase Flow and Fluidization Principles 4.4 Mixing, Agitation, and Agitator Scale-Up
6 Chapter 5: Thermodynamic Laws & Fundamental Relations
5.1 First and Second Laws, Heat Engines, and Carnot Efficiency 5.2 Entropy, Availability, and Exergy Analysis 5.3 Fundamental Property Relations and Maxwell Equations
7 Chapter 6: Real Gases & Equations of State
6.1 Volumetric Properties and Compressibility Factor Charts 6.2 Cubic Equations of State (vdW, RK, SRK, and Peng-Robinson) 6.3 Residual Properties and Enthalpy/Entropy Departure Functions
8 Chapter 7: Phase & Chemical Reaction Equilibria
7.1 Pure Component Vapor Pressure and Phase Equilibria 7.2 Vapor-Liquid Equilibrium (VLE), Raoult's Law, and Activity Coefficients 7.3 Chemical Reaction Equilibria and Equilibrium Constant Calculation
9 Chapter 8: Heat Transfer Mechanisms & Conduction
8.1 Steady-State Conduction in Planar, Cylindrical, and Spherical Geometries 8.2 Convective Heat Transfer and Dimensionless Correlations 8.3 Thermal Radiation, Emissivity, and Surface Radiation Exchange
10 Chapter 9: Heat Exchanger Design & Phase Change
9.1 Shell-and-Tube Exchanger Design, TEMA Standards, and LMTD 9.2 Effectiveness-NTU Method and Exchanger Rating 9.3 Boiling Regimes, Condensation Phenomena, and Fouling Resistances
11 Chapter 10: Mass Transfer Fundamentals & Diffusion
10.1 Molecular Diffusion, Fick's Laws, and Equimolar Counterdiffusion 10.2 Convective Mass Transfer and Film Theories 10.3 Mass Transfer Dimensionless Numbers (Sherwood, Schmidt, Peclet)
12 Chapter 11: Distillation Operations
11.1 Vapor-Liquid Equilibrium and Relative Volatility in Distillation 11.2 McCabe-Thiele Method for Binary Distillation 11.3 Packed vs Tray Columns, Flooding, and Tray Hydraulics 11.4 Multicomponent Distillation Fundamentals and Key Components
13 Chapter 12: Rate-Controlled & Equilibrium Separations
12.1 Gas Absorption, Stripping, and the Kremser Equation 12.2 Liquid-Liquid Extraction and Ternary Phase Equilibria 12.3 Adsorption, Membrane Separations, and Drying Operations 12.4 Filtration, Crystallization, and Solid-Fluid Separations
14 Chapter 13: Chemical Kinetics & Ideal Isothermal Reactors
13.1 Reaction Rates, Rate Laws, and Order of Reaction 13.2 Temperature Dependence and the Arrhenius Equation 13.3 Batch Reactors and Continuous Stirred-Tank Reactors (CSTR) 13.4 Plug Flow Reactors (PFR) and Reactor Combinations
15 Chapter 14: Non-Ideal Flow, Non-Isothermal Reactors & Catalysis
14.1 Yield, Selectivity, and Multiple Reactions (Series and Parallel) 14.2 Non-Isothermal Reactor Design and Thermal Runaway 14.3 Heterogeneous Catalysis, Thiele Modulus, and RTD Models
16 Chapter 15: Physical & Transport Properties of Fluids
15.1 Fluid Density, Specific Gravity, and Viscosity Correlations 15.2 Thermal Conductivity and Specific Heat Capacities 15.3 Estimation Methods and Corresponding States Principles
17 Chapter 16: Materials of Construction & Corrosion
16.1 Mechanical Properties and Materials Selection in Chemical Plants 16.2 Corrosion Mechanisms, Materials Degradation, and Prevention
18 Chapter 17: Process Safety & Pressure Relief Systems
17.1 Hazard Identification Methodologies (HAZOP, FMEA, What-If) 17.2 Pressure Relief Valve (PRV) and Rupture Disk Sizing 17.3 Flammability, Explosions, and Toxic Dispersion Limits 17.4 Inerting, Purging, Discharge Location, and Containment
19 Chapter 18: Process Control & Engineering Economics
18.1 Process Dynamics and Feedback Control Loops 18.2 PID Controller Tuning and Loop Stability 18.3 Chemical Plant Capital Cost Estimation and Profitability Analysis 18.4 Field Instrumentation, Control Valves, Alarms, and Safety Instrumented Systems
20 Chapter 19: Process Design, Equipment Selection & Environmental Compliance
19.1 Process Flow Diagrams, P&IDs, Scale-Up, and Plant Siting 19.2 Process Equipment Selection, Sizing, and Optimization 19.3 Emissions Evaluation, Mitigation, and Remediation
21 Chapter 20: Plant Operation, Reliability & Continuous Improvement
20.1 Operating Procedures, Startup, and Shutdown 20.2 Mechanical Integrity, Reliability, and Failure Mechanisms 20.3 Debottlenecking, Optimization, and Troubleshooting
5.2 Entropy, Availability, and Exergy Analysis
Key Takeaways Explain This Topic AI
Entropy is a path-independent thermodynamic state property defined differentially as dS = (dQ / T)_rev; for ideal gases, specific entropy changes are computed via Delta s = C_p * ln(T2/T1) - R * ln(P2/P1).
The steady-state entropy balance accounts for convective flux, thermal boundary transport, and internal irreversibility: 0 = sum (Q_dot_j / T_j) + sum (m_dot_in * s_in) - sum (m_dot_out * s_out) + S_dot_gen, where S_dot_gen > 0 for all real, irreversible processes.
Flow exergy represents the maximum theoretical shaft work obtainable when a flowing stream is brought into complete thermomechanical equilibrium with an environmental dead state (T0, P0): ex = (h - h0) - T0 * (s - s0) + u^2/2 + gz.
The Gouy-Stodola theorem establishes that the rate of available work permanently destroyed by thermodynamic irreversibility is directly proportional to entropy generation: W_dot_lost = Ex_dot_dest = T0 * S_dot_gen, where T0 is the absolute ambient temperature.
Second-Law (exergetic) efficiency eta_II = Ex_recovered / Ex_supplied pinpoints true thermodynamic waste, exposing why processes that appear 100% efficient under the First Law (e.g., direct steam injection, adiabatic throttling) destroy substantial engineering value.
Last updated: September 2026
5.2 Entropy, Availability, and Exergy Analysis
Energy conservation balances under the First Law treat all kilowatt-hours or BTUs equally, regardless of temperature or thermodynamic utility. However, 1 , 000 kJ 1,000\text{ kJ} 1 , 000 kJ of energy in high-pressure superheated steam at 500 ∘ C 500^\circ\text{C} 50 0 ∘ C has vastly greater capacity to generate mechanical work than 1 , 000 kJ 1,000\text{ kJ} 1 , 000 kJ of low-grade heat in warm wastewater at 35 ∘ C 35^\circ\text{C} 3 5 ∘ C . Exergy (or availability) and entropy analysis provide the quantitative framework for evaluating the true degradation of useful work potential in chemical processes, enabling chemical engineers to locate and minimize avoidable thermodynamic losses on the NCEES PE Chemical Exam .
1. Entropy as a Fundamental Thermodynamic State Property
Rudolf Clausius defined entropy ( S S S ) through the differential relation along an internally reversible path: d S = ( δ Q T ) r e v dS = \left( \frac{\delta Q}{T} \right)_{rev} d S = ( T δ Q ) re v
Because entropy is a state function, the integral of d S dS d S around any closed cycle is identically zero: ∮ d S = 0 \oint dS = 0 ∮ d S = 0
Consequently, the change in entropy Δ S = S 2 − S 1 \Delta S = S_2 - S_1 Δ S = S 2 − S 1 between any two thermodynamic equilibrium states is completely independent of the path taken between them. To calculate Δ S \Delta S Δ S for an irreversible real-world process, engineers construct a convenient hypothetical reversible path connecting the initial and final states.
Entropy Calculations Across Substances
Ideal Gases :
From the fundamental property relations ( T d s = d h − v d P T ds = dh - v dP T d s = d h − v d P and T d s = d u + P d v T ds = du + P dv T d s = d u + P d v ): d s = C p ( T ) d T T − R d P P = C v ( T ) d T T + R d v v ds = C_p(T) \frac{dT}{T} - R \frac{dP}{P} = C_v(T) \frac{dT}{T} + R \frac{dv}{v} d s = C p ( T ) T d T − R P d P = C v ( T ) T d T + R v d v
Assuming constant heat capacity C ˉ p \bar{C}_p C ˉ p over the operating range: Δ s = s 2 − s 1 = C ˉ p ln ( T 2 T 1 ) − R ln ( P 2 P 1 ) \Delta s = s_2 - s_1 = \bar{C}_p \ln\left(\frac{T_2}{T_1}\right) - R \ln\left(\frac{P_2}{P_1}\right) Δ s = s 2 − s 1 = C ˉ p ln ( T 1 T 2 ) − R ln ( P 1 P 2 )
For temperature-dependent polynomial heat capacities ( C p ( T ) = a + b T + c T 2 + d T 3 C_p(T) = a + bT + cT^2 + dT^3 C p ( T ) = a + b T + c T 2 + d T 3 ): Δ s = ∫ T 1 T 2 C p ( T ) T d T − R ln ( P 2 P 1 ) = a ln ( T 2 T 1 ) + b ( T 2 − T 1 ) + c 2 ( T 2 2 − T 1 2 ) + d 3 ( T 2 3 − T 1 3 ) − R ln ( P 2 P 1 ) \Delta s = \int_{T_1}^{T_2} \frac{C_p(T)}{T} dT - R \ln\left(\frac{P_2}{P_1}\right) = a \ln\left(\frac{T_2}{T_1}\right) + b(T_2 - T_1) + \frac{c}{2}(T_2^2 - T_1^2) + \frac{d}{3}(T_2^3 - T_1^3) - R \ln\left(\frac{P_2}{P_1}\right) Δ s = ∫ T 1 T 2 T C p ( T ) d T − R ln ( P 1 P 2 ) = a ln ( T 1 T 2 ) + b ( T 2 − T 1 ) + 2 c ( T 2 2 − T 1 2 ) + 3 d ( T 2 3 − T 1 3 ) − R ln ( P 1 P 2 )
Incompressible Liquids and Solids :
Liquids exhibit negligible volume change ( d v ≈ 0 dv \approx 0 d v ≈ 0 ) and identical heat capacities ( C p ≈ C v = C C_p \approx C_v = C C p ≈ C v = C ): Δ s = ∫ T 1 T 2 C ( T ) T d T ≈ C ˉ ln ( T 2 T 1 ) \Delta s = \int_{T_1}^{T_2} \frac{C(T)}{T} dT \approx \bar{C} \ln\left(\frac{T_2}{T_1}\right) Δ s = ∫ T 1 T 2 T C ( T ) d T ≈ C ˉ ln ( T 1 T 2 )
(Notice that pressure change produces virtually zero entropy change in an incompressible liquid.)
Phase Transitions (Vaporization, Fusion, Sublimation) :
Phase changes for pure substances occur reversibly at constant saturation temperature and pressure: Δ s v a p = Δ h v a p T s a t \Delta s_{vap} = \frac{\Delta h_{vap}}{T_{sat}} Δ s v a p = T s a t Δ h v a p Δ s f u s = Δ h f u s T m e l t \Delta s_{fus} = \frac{\Delta h_{fus}}{T_{melt}} Δ s f u s = T m e lt Δ h f u s
Where T s a t T_{sat} T s a t and T m e l t T_{melt} T m e lt must be in absolute Kelvin or Rankine.
Two-Phase Wet Mixtures :
For wet steam or vapor-liquid mixtures of quality x x x (mass fraction of vapor): s = ( 1 − x ) s f + x s g = s f + x s f g s = (1 - x) s_f + x s_g = s_f + x s_{fg} s = ( 1 − x ) s f + x s g = s f + x s f g
2. Entropy Generation and the Irreversibility Principle
For any process occurring in an isolated system (which exchanges neither mass nor energy with its surroundings), the Second Law mandates: Δ S i s o l a t e d = S g e n ≥ 0 \Delta S_{isolated} = S_{gen} \ge 0 Δ S i so l a t e d = S g e n ≥ 0
For an open control volume operating at steady state, the rate of entropy accumulation is zero. The control volume entropy balance is formulated as: 0 = ∑ j Q ˙ j T j + ∑ i n m ˙ i n s i n − ∑ o u t m ˙ o u t s o u t + S ˙ g e n 0 = \sum_j \frac{\dot{Q}_j}{T_j} + \sum_{in} \dot{m}_{in} s_{in} - \sum_{out} \dot{m}_{out} s_{out} + \dot{S}_{gen} 0 = j ∑ T j Q ˙ j + in ∑ m ˙ in s in − o u t ∑ m ˙ o u t s o u t + S ˙ g e n
Rearranging to solve for the rate of entropy generation ( S ˙ g e n \dot{S}_{gen} S ˙ g e n ): S ˙ g e n = ∑ o u t m ˙ o u t s o u t − ∑ i n m ˙ i n s i n − ∑ j Q ˙ j T j \dot{S}_{gen} = \sum_{out} \dot{m}_{out} s_{out} - \sum_{in} \dot{m}_{in} s_{in} - \sum_j \frac{\dot{Q}_j}{T_j} S ˙ g e n = o u t ∑ m ˙ o u t s o u t − in ∑ m ˙ in s in − j ∑ T j Q ˙ j
Where:
T j T_j T j is the absolute temperature at the boundary where heat transfer rate Q ˙ j \dot{Q}_j Q ˙ j enters the control volume.
S ˙ g e n > 0 \dot{S}_{gen} > 0 S ˙ g e n > 0 for all real, irreversible chemical engineering operations.
S ˙ g e n = 0 \dot{S}_{gen} = 0 S ˙ g e n = 0 for idealized, internally and externally reversible processes.
S ˙ g e n < 0 \dot{S}_{gen} < 0 S ˙ g e n < 0 is strictly impossible and violates the Second Law.
Primary Sources of Entropy Generation in Chemical Plants
Heat Transfer Across Finite Temperature Gradients ( Δ T \Delta T Δ T ) : Heat exchange through exchanger tube walls degrades available energy.
Fluid Friction and Viscous Dissipation : Pressure drop through pipes, valves, orifice plates, and packed beds.
Unrestrained Expansion / Throttling : Pressure reduction across control valves without work extraction.
Uncontrolled Mixing : Blending of streams with differing temperatures, pressures, or chemical compositions.
Spontaneous Chemical Reactions : Highly exothermic or endothermic non-equilibrium reaction steps.
3. Availability and Flow Exergy
Exergy ( E x Ex E x )—historically termed availability —is the maximum theoretical shaft work that can be extracted from a system or stream as it is brought into complete thermomechanical and chemical equilibrium with a defined reference environment, termed the dead state ( T 0 , P 0 T_0, P_0 T 0 , P 0 ).
The Standard Dead State
In chemical engineering calculations, the terrestrial environmental dead state is universally established as:
Reference Temperature: T 0 = 25.0 ∘ C = 298.15 K T_0 = 25.0^\circ\text{C} = 298.15\text{ K} T 0 = 25. 0 ∘ C = 298.15 K ( 77.0 ∘ F = 536.67 ∘ R 77.0^\circ\text{F} = 536.67^\circ\text{R} 77. 0 ∘ F = 536.6 7 ∘ R )
Reference Pressure: P 0 = 1.00 atm = 101.325 kPa = 14.696 psia P_0 = 1.00\text{ atm} = 101.325\text{ kPa} = 14.696\text{ psia} P 0 = 1.00 atm = 101.325 kPa = 14.696 psia
Reference Composition: Atmospheric air, liquid water, and standard mineral species at ground level.
Flow Exergy of a Flowing Stream ( e x ex e x )
For a continuous stream of fluid entering or leaving a control volume, the specific physical flow exergy (excluding chemical exergy) is defined as: e x = ( h − h 0 ) − T 0 ( s − s 0 ) + u 2 2 + g z ex = (h - h_0) - T_0 (s - s_0) + \frac{u^2}{2} + g z e x = ( h − h 0 ) − T 0 ( s − s 0 ) + 2 u 2 + g z
Where:
h h h and s s s are the specific enthalpy and entropy of the stream at process state ( T , P ) (T, P) ( T , P ) .
h 0 h_0 h 0 and s 0 s_0 s 0 are the specific enthalpy and entropy of the same fluid evaluated at the dead state ( T 0 , P 0 ) (T_0, P_0) ( T 0 , P 0 ) .
T 0 T_0 T 0 is the absolute temperature of the environmental dead state.
For a change in flow exergy between State 1 and State 2 across an open unit operation: Δ e x = e x 2 − e x 1 = ( h 2 − h 1 ) − T 0 ( s 2 − s 1 ) + u 2 2 − u 1 2 2 + g ( z 2 − z 1 ) \Delta ex = ex_2 - ex_1 = (h_2 - h_1) - T_0 (s_2 - s_1) + \frac{u_2^2 - u_1^2}{2} + g (z_2 - z_1) Δ e x = e x 2 − e x 1 = ( h 2 − h 1 ) − T 0 ( s 2 − s 1 ) + 2 u 2 2 − u 1 2 + g ( z 2 − z 1 )
Notice that the dead state properties h 0 h_0 h 0 and s 0 s_0 s 0 cancel completely when calculating changes between two process streams!
Exergy Transferred with Heat and Work
Exergy of Shaft Work ( E x W Ex_W E x W ) : Pure mechanical shaft work represents ordered kinetic energy; it is 100% available: E x W = W ˙ s Ex_W = \dot{W}_s E x W = W ˙ s
Exergy of Heat Transfer ( E x Q Ex_Q E x Q ) : Thermal energy transferred at boundary temperature T B T_B T B carries exergy proportional to the Carnot factor: E x Q = Q ˙ ( 1 − T 0 T B ) Ex_Q = \dot{Q} \left( 1 - \frac{T_0}{T_B} \right) E x Q = Q ˙ ( 1 − T B T 0 )
If T B > T 0 T_B > T_0 T B > T 0 : Heat is hot; exergy is positive.
If T B = T 0 T_B = T_0 T B = T 0 : Ambient heat has zero exergy ( E x Q = 0 Ex_Q = 0 E x Q = 0 ).
If T B < T 0 T_B < T_0 T B < T 0 : Cold thermal energy has positive exergy (capacity to absorb heat from the ambient dead state in a refrigeration heat engine to produce work).
4. The Gouy-Stodola Theorem and Lost Work
The fundamental connection between entropy generation and exergy destruction is codified by the Gouy-Stodola theorem : W ˙ l o s t = E x ˙ d e s t = T 0 S ˙ g e n \dot{W}_{lost} = \dot{Ex}_{dest} = T_0 \dot{S}_{gen} W ˙ l os t = E x ˙ d es t = T 0 S ˙ g e n
Where:
W ˙ l o s t \dot{W}_{lost} W ˙ l os t is the rate of lost work (the mechanical shaft power permanently destroyed by irreversibility).
E x ˙ d e s t \dot{Ex}_{dest} E x ˙ d es t is the rate of exergy destruction.
T 0 T_0 T 0 is the absolute ambient temperature of the environmental dead state ( 298.15 K 298.15\text{ K} 298.15 K or 536.67 ∘ R 536.67^\circ\text{R} 536.6 7 ∘ R ).
S ˙ g e n \dot{S}_{gen} S ˙ g e n is the net rate of entropy generation across the process and its immediate surroundings.
Work Relationships for Process Equipment
Power-Producing Equipment (Turbines / Expanders) : W ˙ a c t u a l = W ˙ r e v − W ˙ l o s t = − Δ H ˙ − T 0 S ˙ g e n \dot{W}_{actual} = \dot{W}_{rev} - \dot{W}_{lost} = -\Delta \dot{H} - T_0 \dot{S}_{gen} W ˙ a c t u a l = W ˙ re v − W ˙ l os t = − Δ H ˙ − T 0 S ˙ g e n
Irreversibility reduces the electrical power generated below the reversible maximum.
Power-Consuming Equipment (Compressors / Pumps) : W ˙ a c t u a l , i n = W ˙ r e v , i n + W ˙ l o s t = Δ H ˙ + T 0 S ˙ g e n \dot{W}_{actual, in} = \dot{W}_{rev, in} + \dot{W}_{lost} = \Delta \dot{H} + T_0 \dot{S}_{gen} W ˙ a c t u a l , in = W ˙ re v , in + W ˙ l os t = Δ H ˙ + T 0 S ˙ g e n
Irreversibility increases the electrical power consumed above the reversible minimum.
Second-Law (Exergetic) Efficiency
The Second-Law efficiency ( η I I \eta_{II} η II ) provides a true measure of thermodynamic excellence: η I I = Exergy Recovered (Output) Exergy Supplied (Input) = 1 − E x ˙ d e s t Exergy Supplied = 1 − T 0 S ˙ g e n Exergy Supplied \eta_{II} = \frac{\text{Exergy Recovered (Output)}}{\text{Exergy Supplied (Input)}} = 1 - \frac{\dot{Ex}_{dest}}{\text{Exergy Supplied}} = 1 - \frac{T_0 \dot{S}_{gen}}{\text{Exergy Supplied}} η II = Exergy Supplied (Input) Exergy Recovered (Output) = 1 − Exergy Supplied E x ˙ d es t = 1 − Exergy Supplied T 0 S ˙ g e n
5. Summary Table: Exergy Formulations Across Process Equipment
Process Equipment First-Law Energy Balance Entropy Generation ( S ˙ g e n \dot{S}_{gen} S ˙ g e n ) Rate of Lost Work ( W ˙ l o s t \dot{W}_{lost} W ˙ l os t ) Second-Law Efficiency ( η I I \eta_{II} η II )
Adiabatic Turbine W ˙ s = m ˙ ( h 1 − h 2 ) \dot{W}_s = \dot{m}(h_1 - h_2) W ˙ s = m ˙ ( h 1 − h 2 ) m ˙ ( s 2 − s 1 ) \dot{m}(s_2 - s_1) m ˙ ( s 2 − s 1 ) m ˙ T 0 ( s 2 − s 1 ) \dot{m} T_0 (s_2 - s_1) m ˙ T 0 ( s 2 − s 1 ) η I I = W ˙ s m ˙ ( e x 1 − e x 2 ) \eta_{II} = \frac{\dot{W}_s}{\dot{m}(ex_1 - ex_2)} η II = m ˙ ( e x 1 − e x 2 ) W ˙ s
Adiabatic Compressor W ˙ i n = m ˙ ( h 2 − h 1 ) \dot{W}_{in} = \dot{m}(h_2 - h_1) W ˙ in = m ˙ ( h 2 − h 1 ) m ˙ ( s 2 − s 1 ) \dot{m}(s_2 - s_1) m ˙ ( s 2 − s 1 ) m ˙ T 0 ( s 2 − s 1 ) \dot{m} T_0 (s_2 - s_1) m ˙ T 0 ( s 2 − s 1 ) η I I = m ˙ ( e x 2 − e x 1 ) W ˙ i n \eta_{II} = \frac{\dot{m}(ex_2 - ex_1)}{\dot{W}_{in}} η II = W ˙ in m ˙ ( e x 2 − e x 1 )
Heat Exchanger m ˙ h Δ h h = − m ˙ c Δ h c \dot{m}_h \Delta h_h = -\dot{m}_c \Delta h_c m ˙ h Δ h h = − m ˙ c Δ h c m ˙ h Δ s h + m ˙ c Δ s c \dot{m}_h \Delta s_h + \dot{m}_c \Delta s_c m ˙ h Δ s h + m ˙ c Δ s c T 0 ( m ˙ h Δ s h + m ˙ c Δ s c ) T_0 (\dot{m}_h \Delta s_h + \dot{m}_c \Delta s_c) T 0 ( m ˙ h Δ s h + m ˙ c Δ s c ) η I I = m ˙ c ( e x c , o u t − e x c , i n ) m ˙ h ( e x h , i n − e x h , o u t ) \eta_{II} = \frac{\dot{m}_c (ex_{c,out} - ex_{c,in})}{\dot{m}_h (ex_{h,in} - ex_{h,out})} η II = m ˙ h ( e x h , in − e x h , o u t ) m ˙ c ( e x c , o u t − e x c , in )
Adiabatic Throttling Valve h 1 = h 2 h_1 = h_2 h 1 = h 2 ( Δ h = 0 \Delta h = 0 Δ h = 0 ) m ˙ ( s 2 − s 1 ) > 0 \dot{m}(s_2 - s_1) > 0 m ˙ ( s 2 − s 1 ) > 0 m ˙ T 0 ( s 2 − s 1 ) \dot{m} T_0 (s_2 - s_1) m ˙ T 0 ( s 2 − s 1 ) η I I = 0 % \eta_{II} = 0\% η II = 0% (100% exergy destroyed)
Adiabatic Stream Mixer ∑ m ˙ i n h i n = m ˙ o u t h o u t \sum \dot{m}_{in} h_{in} = \dot{m}_{out} h_{out} ∑ m ˙ in h in = m ˙ o u t h o u t m ˙ o u t s o u t − ∑ m ˙ i n s i n \dot{m}_{out} s_{out} - \sum \dot{m}_{in} s_{in} m ˙ o u t s o u t − ∑ m ˙ in s in T 0 S ˙ g e n T_0 \dot{S}_{gen} T 0 S ˙ g e n η I I = m ˙ o u t e x o u t ∑ m ˙ i n e x i n \eta_{II} = \frac{\dot{m}_{out} ex_{out}}{\sum \dot{m}_{in} ex_{in}} η II = ∑ m ˙ in e x in m ˙ o u t e x o u t
6. Critical PE Exam Traps & Pitfalls
- Warning
- PE Exam Trap 1: The Adiabatic Throttling Illusion
Passing a fluid through an insulated pressure-relief or expansion valve is isenthalpic ( h 1 = h 2 h_1 = h_2 h 1 = h 2 ). Candidates frequently assume that because Δ h = 0 \Delta h = 0 Δ h = 0 and Q ˙ = 0 \dot{Q} = 0 Q ˙ = 0 , no energy loss occurred. In reality, pressure drop generates significant entropy: Δ s = − R ln ( P 2 / P 1 ) > 0 \Delta s = -R \ln(P_2/P_1) > 0 Δ s = − R ln ( P 2 / P 1 ) > 0 . The lost work is W ˙ l o s t = − m ˙ R T 0 ln ( P 2 / P 1 ) \dot{W}_{lost} = -\dot{m} R T_0 \ln(P_2/P_1) W ˙ l os t = − m ˙ R T 0 ln ( P 2 / P 1 ) . Throttling destroys 100% of the stream's pressure exergy without producing a single kilowatt of power!
- Warning
- PE Exam Trap 2: Ambient Dead-State Temperature in Gouy-Stodola
When applying W ˙ l o s t = T 0 S ˙ g e n \dot{W}_{lost} = T_0 \dot{S}_{gen} W ˙ l os t = T 0 S ˙ g e n , T 0 T_0 T 0 is the absolute ambient environment temperature (e.g., 298.15 K 298.15\text{ K} 298.15 K or 536.67 ∘ R 536.67^\circ\text{R} 536.6 7 ∘ R ), NOT the fluid stream temperature! Substituting stream temperature T 1 T_1 T 1 or T 2 T_2 T 2 into the Gouy-Stodola equation is a frequent exam mistake.
- Warning
- PE Exam Trap 3: Confusing Isentropic Efficiency with Second-Law Efficiency
For a turbine, isentropic efficiency is η t = ( h 1 − h 2 ) / ( h 1 − h 2 s ) \eta_t = (h_1 - h_2) / (h_1 - h_{2s}) η t = ( h 1 − h 2 ) / ( h 1 − h 2 s ) . Second-Law efficiency is η I I = ( h 1 − h 2 ) / ( e x 1 − e x 2 ) = ( h 1 − h 2 ) / [ ( h 1 − h 2 ) + T 0 ( s 2 − s 1 ) ] \eta_{II} = (h_1 - h_2) / (ex_1 - ex_2) = (h_1 - h_2) / [(h_1 - h_2) + T_0(s_2 - s_1)] η II = ( h 1 − h 2 ) / ( e x 1 − e x 2 ) = ( h 1 − h 2 ) / [( h 1 − h 2 ) + T 0 ( s 2 − s 1 )] . These values are mathematically distinct; η I I \eta_{II} η II is typically higher than η t \eta_t η t because the exhaust steam still retains substantial thermal exergy relative to the environment.
- 7. Step-by-Step Worked Numerical Example: Steam Turbine Exergy Destruction
- Problem Statement
A continuous chemical plant boiler supplies superheated steam at P 1 = 4.00 MPa P_1 = 4.00\text{ MPa} P 1 = 4.00 MPa ( 40.0 bar 40.0\text{ bar} 40.0 bar ) and T 1 = 400.0 ∘ C T_1 = 400.0^\circ\text{C} T 1 = 400. 0 ∘ C to an uninsulated adiabatic steam turbine at a mass flow rate of m ˙ = 10.00 kg/s \dot{m} = 10.00\text{ kg/s} m ˙ = 10.00 kg/s . The steam expands through the turbine stages and exhausts at P 2 = 0.100 MPa P_2 = 0.100\text{ MPa} P 2 = 0.100 MPa ( 1.00 bar 1.00\text{ bar} 1.00 bar ). The turbine operates with an isentropic efficiency of η t = 0.820 \eta_t = 0.820 η t = 0.820 ( 82.0 % 82.0\% 82.0% ).
The plant environmental dead state is T 0 = 25.0 ∘ C = 298.15 K T_0 = 25.0^\circ\text{C} = 298.15\text{ K} T 0 = 25. 0 ∘ C = 298.15 K and P 0 = 0.100 MPa P_0 = 0.100\text{ MPa} P 0 = 0.100 MPa .
Thermodynamic Data from Steam Tables:
Inlet State 1 ( 4.00 MPa , 400.0 ∘ C 4.00\text{ MPa}, 400.0^\circ\text{C} 4.00 MPa , 400. 0 ∘ C ):
- Enthalpy: h 1 = 3 , 214.5 kJ/kg h_1 = 3,214.5\text{ kJ/kg} h 1 = 3 , 214.5 kJ/kg
- Entropy: s 1 = 6.7714 kJ/(kg ⋅ K) s_1 = 6.7714\text{ kJ/(kg}\cdot\text{K)} s 1 = 6.7714 kJ/(kg ⋅ K)
Exhaust Pressure ( 0.100 MPa 0.100\text{ MPa} 0.100 MPa ):
Saturated liquid: h f = 417.51 kJ/kg h_f = 417.51\text{ kJ/kg} h f = 417.51 kJ/kg , s f = 1.3028 kJ/(kg ⋅ K) s_f = 1.3028\text{ kJ/(kg}\cdot\text{K)} s f = 1.3028 kJ/(kg ⋅ K)
Saturated vapor: h g = 2 , 675.0 kJ/kg h_g = 2,675.0\text{ kJ/kg} h g = 2 , 675.0 kJ/kg , s g = 7.3598 kJ/(kg ⋅ K) s_g = 7.3598\text{ kJ/(kg}\cdot\text{K)} s g = 7.3598 kJ/(kg ⋅ K)
Latent properties: h f g = 2 , 257.5 kJ/kg h_{fg} = 2,257.5\text{ kJ/kg} h f g = 2 , 257.5 kJ/kg , s f g = 6.0570 kJ/(kg ⋅ K) s_{fg} = 6.0570\text{ kJ/(kg}\cdot\text{K)} s f g = 6.0570 kJ/(kg ⋅ K)
Calculate:
The ideal isentropic exhaust state ( h 2 s h_{2s} h 2 s ) and the isentropic shaft power output ( W ˙ s i s \dot{W}_s^{is} W ˙ s i s ).
The actual shaft power delivered by the turbine ( W ˙ a c t u a l \dot{W}_{actual} W ˙ a c t u a l ) and the actual exhaust state properties ( h 2 , x 2 , s 2 h_2, x_2, s_2 h 2 , x 2 , s 2 ).
The rate of entropy generation within the turbine ( S ˙ g e n \dot{S}_{gen} S ˙ g e n ).
The rate of lost work ( W ˙ l o s t \dot{W}_{lost} W ˙ l os t ) destroyed by internal fluid friction and irreversibility.
The change in flow exergy rate across the turbine ( Δ E x ˙ \Delta \dot{Ex} Δ E x ˙ ).
The Second-Law (exergetic) efficiency ( η I I \eta_{II} η II ) of the turbine.
- Step-by-Step Solution
- Step 1: Ideal Isentropic Expansion ( 1 → 2 s 1 \to 2s 1 → 2 s )
In an ideal reversible expansion, entropy is conserved: s 2 s = s 1 = 6.7714 kJ/(kg ⋅ K) s_{2s} = s_1 = 6.7714\text{ kJ/(kg}\cdot\text{K)} s 2 s = s 1 = 6.7714 kJ/(kg ⋅ K)
Because s f ( 1.3028 ) < s 2 s < s g ( 7.3598 ) s_f (1.3028) < s_{2s} < s_g (7.3598) s f ( 1.3028 ) < s 2 s < s g ( 7.3598 ) , the ideal exhaust is a two-phase wet steam mixture. Evaluate isentropic quality x 2 s x_{2s} x 2 s : x 2 s = s 2 s − s f s f g = 6.7714 − 1.3028 6.0570 = 5.4686 6.0570 = 0.902856 (90.29% vapor) x_{2s} = \frac{s_{2s} - s_f}{s_{fg}} = \frac{6.7714 - 1.3028}{6.0570} = \frac{5.4686}{6.0570} = 0.902856\text{ (90.29\% vapor)} x 2 s = s f g s 2 s − s f = 6.0570 6.7714 − 1.3028 = 6.0570 5.4686 = 0.902856 (90.29% vapor)
Evaluate isentropic exhaust enthalpy h 2 s h_{2s} h 2 s : h 2 s = h f + x 2 s h f g = 417.51 + ( 0.902856 × 2 , 257.5 ) = 417.51 + 2 , 038.19 = 2 , 455.70 kJ/kg h_{2s} = h_f + x_{2s} h_{fg} = 417.51 + (0.902856 \times 2,257.5) = 417.51 + 2,038.19 = 2,455.70\text{ kJ/kg} h 2 s = h f + x 2 s h f g = 417.51 + ( 0.902856 × 2 , 257.5 ) = 417.51 + 2 , 038.19 = 2 , 455.70 kJ/kg
Isentropic work per unit mass and total isentropic power: w s i s = h 1 − h 2 s = 3 , 214.5 − 2 , 455.70 = 758.80 kJ/kg w_s^{is} = h_1 - h_{2s} = 3,214.5 - 2,455.70 = 758.80\text{ kJ/kg} w s i s = h 1 − h 2 s = 3 , 214.5 − 2 , 455.70 = 758.80 kJ/kg W ˙ s i s = m ˙ × w s i s = ( 10.00 kg/s ) × ( 758.80 kJ/kg ) = 7 , 588.0 kW ( 7.588 MW ) \dot{W}_s^{is} = \dot{m} \times w_s^{is} = (10.00\text{ kg/s}) \times (758.80\text{ kJ/kg}) = \mathbf{7,588.0\text{ kW} \quad (7.588\text{ MW})} W ˙ s i s = m ˙ × w s i s = ( 10.00 kg/s ) × ( 758.80 kJ/kg ) = 7 , 588.0 kW ( 7.588 MW )
Step 2: Actual Turbine Expansion
Using the isentropic efficiency η t = 0.820 \eta_t = 0.820 η t = 0.820 : w a c t u a l = η t × w s i s = 0.820 × 758.80 kJ/kg = 622.22 kJ/kg w_{actual} = \eta_t \times w_s^{is} = 0.820 \times 758.80\text{ kJ/kg} = 622.22\text{ kJ/kg} w a c t u a l = η t × w s i s = 0.820 × 758.80 kJ/kg = 622.22 kJ/kg W ˙ a c t u a l = m ˙ × w a c t u a l = ( 10.00 kg/s ) × ( 622.22 kJ/kg ) = 6 , 222.2 kW ( 6.222 MW ) \dot{W}_{actual} = \dot{m} \times w_{actual} = (10.00\text{ kg/s}) \times (622.22\text{ kJ/kg}) = \mathbf{6,222.2\text{ kW} \quad (6.222\text{ MW})} W ˙ a c t u a l = m ˙ × w a c t u a l = ( 10.00 kg/s ) × ( 622.22 kJ/kg ) = 6 , 222.2 kW ( 6.222 MW )
Actual exhaust enthalpy ( h 2 h_2 h 2 ): h 2 = h 1 − w a c t u a l = 3 , 214.5 − 622.22 = 2 , 592.28 kJ/kg h_2 = h_1 - w_{actual} = 3,214.5 - 622.22 = 2,592.28\text{ kJ/kg} h 2 = h 1 − w a c t u a l = 3 , 214.5 − 622.22 = 2 , 592.28 kJ/kg
Actual exhaust quality ( x 2 x_2 x 2 ): x 2 = h 2 − h f h f g = 2 , 592.28 − 417.51 2 , 257.5 = 2 , 174.77 2 , 257.5 = 0.963353 (96.34% vapor) x_2 = \frac{h_2 - h_f}{h_{fg}} = \frac{2,592.28 - 417.51}{2,257.5} = \frac{2,174.77}{2,257.5} = 0.963353\text{ (96.34\% vapor)} x 2 = h f g h 2 − h f = 2 , 257.5 2 , 592.28 − 417.51 = 2 , 257.5 2 , 174.77 = 0.963353 (96.34% vapor)
Actual exhaust entropy ( s 2 s_2 s 2 ): s 2 = s f + x 2 s f g = 1.3028 + ( 0.963353 × 6.0570 ) = 1.3028 + 5.8350 = 7.1378 kJ/(kg ⋅ K) s_2 = s_f + x_2 s_{fg} = 1.3028 + (0.963353 \times 6.0570) = 1.3028 + 5.8350 = \mathbf{7.1378\text{ kJ/(kg}\cdot\text{K)}} s 2 = s f + x 2 s f g = 1.3028 + ( 0.963353 × 6.0570 ) = 1.3028 + 5.8350 = 7.1378 kJ/(kg ⋅ K)
(Notice that s 2 > s 1 s_2 > s_1 s 2 > s 1 , verifying entropy generation due to blade friction and expansion turbulence.)
Step 3: Rate of Entropy Generation ( S ˙ g e n \dot{S}_{gen} S ˙ g e n )
Because the turbine is well-insulated and adiabatic ( Q ˙ = 0 \dot{Q} = 0 Q ˙ = 0 ): S ˙ g e n = m ˙ ( s 2 − s 1 ) = ( 10.00 kg/s ) × ( 7.1378 − 6.7714 ) kJ/(kg ⋅ K) \dot{S}_{gen} = \dot{m} (s_2 - s_1) = (10.00\text{ kg/s}) \times (7.1378 - 6.7714)\text{ kJ/(kg}\cdot\text{K)} S ˙ g e n = m ˙ ( s 2 − s 1 ) = ( 10.00 kg/s ) × ( 7.1378 − 6.7714 ) kJ/(kg ⋅ K) S ˙ g e n = 10.00 × 0.3664 = 3.664 kW/K ( 3 , 664 W/K ) \dot{S}_{gen} = 10.00 \times 0.3664 = \mathbf{3.664\text{ kW/K} \quad (3,664\text{ W/K})} S ˙ g e n = 10.00 × 0.3664 = 3.664 kW/K ( 3 , 664 W/K )
Step 4: Rate of Lost Work ( W ˙ l o s t \dot{W}_{lost} W ˙ l os t )
Apply the Gouy-Stodola theorem with absolute ambient temperature T 0 = 298.15 K T_0 = 298.15\text{ K} T 0 = 298.15 K : W ˙ l o s t = T 0 S ˙ g e n = 298.15 K × 3.664 kW/K = 1 , 092.4 kW ( 1.0924 MW ) \dot{W}_{lost} = T_0 \dot{S}_{gen} = 298.15\text{ K} \times 3.664\text{ kW/K} = \mathbf{1,092.4\text{ kW} \quad (1.0924\text{ MW})} W ˙ l os t = T 0 S ˙ g e n = 298.15 K × 3.664 kW/K = 1 , 092.4 kW ( 1.0924 MW )
Step 5: Change in Flow Exergy Across the Turbine ( Δ E x ˙ \Delta \dot{Ex} Δ E x ˙ ) Δ E x ˙ = m ˙ ( e x 1 − e x 2 ) = m ˙ [ ( h 1 − h 2 ) − T 0 ( s 1 − s 2 ) ] \Delta \dot{Ex} = \dot{m} (ex_1 - ex_2) = \dot{m} \left[ (h_1 - h_2) - T_0 (s_1 - s_2) \right] Δ E x ˙ = m ˙ ( e x 1 − e x 2 ) = m ˙ [ ( h 1 − h 2 ) − T 0 ( s 1 − s 2 ) ] Δ E x ˙ = m ˙ ( h 1 − h 2 ) + m ˙ T 0 ( s 2 − s 1 ) = W ˙ a c t u a l + W ˙ l o s t \Delta \dot{Ex} = \dot{m} (h_1 - h_2) + \dot{m} T_0 (s_2 - s_1) = \dot{W}_{actual} + \dot{W}_{lost} Δ E x ˙ = m ˙ ( h 1 − h 2 ) + m ˙ T 0 ( s 2 − s 1 ) = W ˙ a c t u a l + W ˙ l os t Δ E x ˙ = 6 , 222.2 kW + 1 , 092.4 kW = 7 , 314.6 kW ( 7.315 MW ) \Delta \dot{Ex} = 6,222.2\text{ kW} + 1,092.4\text{ kW} = \mathbf{7,314.6\text{ kW} \quad (7.315\text{ MW})} Δ E x ˙ = 6 , 222.2 kW + 1 , 092.4 kW = 7 , 314.6 kW ( 7.315 MW )
Step 6: Second-Law Efficiency ( η I I \eta_{II} η II ) η I I = W ˙ a c t u a l Δ E x ˙ = 6 , 222.2 kW 7 , 314.6 kW = 0.8507 (85.07%) \eta_{II} = \frac{\dot{W}_{actual}}{\Delta \dot{Ex}} = \frac{6,222.2\text{ kW}}{7,314.6\text{ kW}} = \mathbf{0.8507\text{ (85.07\%)}} η II = Δ E x ˙ W ˙ a c t u a l = 7 , 314.6 kW 6 , 222.2 kW = 0.8507 (85.07%)
(Engineering Insight: While the isentropic efficiency based strictly on mechanical expansion enthalpy drop is 82.0 % 82.0\% 82.0% , the exergetic Second-Law efficiency is 85.1 % 85.1\% 85.1% . This demonstrates that the steam exhausted at 0.10 MPa 0.10\text{ MPa} 0.10 MPa still retains significant thermal exergy that can be utilized in downstream district heating or chemical reboilers.)