Study guide

1.2 Handbook, ISA-5.1, and IEC 61511 on Exam Day

NCEES PE Control Systems Engineering Exam Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Handbook, ISA-5.1, and IEC 61511 on Exam Day 1.3 CBT Strategy, AITs, Calculators, and Pacing

2 Process Measurement Sensors

2.1 Pressure, Level, and Temperature Sensors 2.2 Flow, Counter, and Motion Sensors 2.3 Analytical Instruments and Sampling Systems

3 Specialty Sensors and Characteristics

3.1 Fire and Gas Detectors 3.2 Machinery Monitoring and Protection 3.3 Sensor Characteristics: Accuracy, Calibration, and Dynamics

4 Selection, Installation, and Primary Calculations

4.1 Sensor Selection and Material Compatibility 4.2 Sensor Installation Details and Drawings 4.3 Flow Calculations 4.4 Level Calculations

5 Conversions, Thermowells, and Checkout

5.1 Process Measurement Unit Conversions 5.2 Thermowell Design and Wake Frequency 5.3 Sensor Testing and Commissioning

6 Drawings, Dynamics, and PID

6.1 P&IDs, Loop Diagrams, and ISA-5.1 Symbology 6.2 Process Dynamics and Loop Response 6.3 Feedback Control and PID

7 Advanced, Discrete, and Process Applications

7.1 Feedforward, Cascade, Ratio, Override, and Split-Range 7.2 Discrete and Sequential Control 7.3 Control of Common Process Equipment

8 HMI, Alarms, Logic, and Architecture

8.1 HMI, Displays, and Control-Room Layout 8.2 Alarm Management 8.3 IEC 61131-3 Logic Implementation 8.4 DCS, PLC, SCADA Architecture and Interfaces

9 Capacity, Testing, and Cybersecurity

9.1 Capacity, Availability, Heat Load, Power, and Environment 9.2 FAT, IST, SAT, and Commissioning 9.3 Performance Monitoring and Management of Change 9.4 Control-System Cybersecurity

10 Valve Type, Trim, Sizing, and Actuators

10.1 Valve Types and Materials 10.2 Valve Trim, Leakage Class, and Characteristics 10.3 Valve Sizing, Pressure Drop, and Split-Range 10.4 Actuators and Failure Modes

11 Fluid Dynamics, Accessories, and Relief Types

11.1 Cavitation, Flashing, Choked Flow, and Noise 11.2 Valve Accessories and Installation 11.3 Pressure-Relieving Device Types and Installation 11.4 Pressure-Relieving Device Calculations

12 Motors, Solenoids, Regulators, and Checkout

12.1 Motor Starters, VSDs, and Soft Starters 12.2 Solenoid Valves and Relays as Final Elements 12.3 Self-Regulating Devices 12.4 Final Element Testing and Commissioning

13 Signal Types and Conversion

13.1 Analog and Discrete Signal Types 13.2 Buses, Topologies, and Digital Protocols 13.3 Signal Conversion, I/P, Splitters, and Bit Precision

14 Hazardous Areas, Power, and Circuits

14.1 Hazardous-Area Methods and Intrinsic Safety 14.2 Power, Grounding, Segregation, and EMI 14.3 Two-Wire, Four-Wire, and Loop Calculations

15 Media and Network Architecture

15.1 Transmission Media: Copper, Fiber, Wireless 15.2 TCP/IP, OPC, Addressing, and Architectures 15.3 OPC, Network Addressing, and Segmentation

16 Lifecycle and Risk Allocation

16.1 IEC 61511 Lifecycle Structure and Phases 16.2 Hazard and Risk Assessment 16.3 LOPA, IPLs, and SIF Identification

17 SRS, Design, and SIL Calculations

17.1 Safety Requirements Specification 17.2 SIS Design, Device Selection, and Constraints 17.3 SIL Calculations and Formulas

18 SAT, Proof Testing, and MOC

18.1 Installation, Commissioning, Validation, and SAT 18.2 Operation, Proof Testing, Demands, and Bypasses 18.3 Modification, Decommissioning, and MOC

1.2 Handbook, ISA-5.1, and IEC 61511 on Exam Day

Key Takeaways Explain This Topic AI

On exam day you may use only the searchable electronic PE Control Systems Reference Handbook plus the two 2027 supplied design standards: ANSI/ISA-5.1 (2024) and ISA/IEC 61511 Part 1 (2018).

NCEES scores solutions that reference a standard of practice against that supplied list and revision year; solutions based on other standards or other years do not receive credit.

NCEES does not sell printed copies of the handbook and does not sell or ship the design standards; personal copies stay in the Pearson VUE locker.

IEC 61508 is not the supplied process-sector standard; ISA-18.2 and IEC 62443 are useful professionally but are not on the April 2027 supplied list.

The exam search box is the allowed search method; the Examinee Guide states that Ctrl+F is not available on the supplied PDFs.

Last updated: August 2026

Why the supplied list is a scoring rule, not a suggestion

On April 14, 2027 you will not open a milk crate of International Society of Automation (ISA) books. NCEES will provide a searchable electronic PE Control Systems Reference Handbook and the design standards listed on the last page of the 2027 specification . Those files—and only those files—are the reference materials you may use. Pearson VUE will not let personal copies into the testing room.

The specification is explicit about years. Solutions to exam questions that reference a standard of practice are scored based on this list and the revision year shown. Solutions based on other standards will not receive credit. That sentence is why a perfectly good plant standard operating procedure can still be a wrong exam answer. If the item is testing ANSI/ISA-5.1 , the credited identification rules are the 2024 edition, not the 2009 edition many of us still have tabbed at the office. If the item is testing functional safety in the process sector, the credited framework is ISA/IEC 61511, Part 1, 2018 , not a memory of IEC 61508 from a general functional-safety course.

NCEES does not sell printed copies of the handbook and does not provide (sell) design standards . You obtain the handbook through MyNCEES for study. You obtain ISA/IEC standards from the publisher or a bookseller for study. On exam day both appear as searchable PDF files with linked chapters . The NCEES Examinee Guide (May 2026) adds a software detail that costs people minutes: use the search box on the left of the supplied reference pane. Ctrl+F is not available.

The two 2027 design standards—by exact title

The April 2027 supplied list is short. Memorize the names and years; do not pad it with “standards everyone uses.”

  • Abbreviation on the spec Title and year Publisher listed
  • ANSI/ISA-5.1 Instrumentation and Control – Symbols and Identification, 2024 ISA

ISA/IEC 61511 Functional Safety – Safety Instrumented Systems for the Process Industry Sector, Part 1 : Framework, definitions, system, hardware and application programming requirements, 2018 ISA

ANSI/ISA-5.1 (2024) is the symbology and identification standard behind piping and instrumentation diagrams (P&IDs), loop numbers, balloon letters, and typical identification structures. If a drag-and-drop item asks you to complete a tag or to interpret a balloon, the credited convention is 2024 ISA-5.1 as supplied—not “how our mill tags transmitters.”

ISA/IEC 61511 Part 1 (2018) is the process-industry safety-instrumented-system (SIS) standard. It is not the generic IEC 61508 functional-safety standard used across many sectors, and the 2027 exam does not supply 61511 Parts 2 and 3. When a question is about lifecycle, safety requirements specification, or hardware/application-programming requirements in the process sector, search 61511-1 (2018) rather than arguing from 61508 vocabulary you used on a different project.

What is not supplied—even if you use it at work

Two documents show up constantly in professional practice and are not on the 2027 supplied list:

ISA-18.2 (alarm management) is a major plant standard. Domain 2.C still tests human factors and alarm management as exam knowledge . That does not put ISA-18.2 on the searchable PDF rack.

IEC 62443 (industrial automation and control-system security) is how many teams talk about cybersecurity. Domain 2.G still tests cybersecurity practices . That does not put 62443 in the exam software.

If an item can be answered from the handbook, from ISA-5.1 (2024), from 61511-1 (2018), or from first-principles engineering in the specification’s knowledge areas, you can score it. If your only path is “I remember the clause number in 62443-3-3,” you do not have that book.

Loading diagram... What you can use at the PE Control Systems workstation vs what stays in the locker

Exam traps that look like professionalism

Trap 1 — Bringing personal ISA books. A current 2024 ISA-5.1 hardcover is still not allowed in the room. The credited copy is the NCEES-supplied PDF. Put the book in the locker with your phone.

Trap 2 — Using 2009 ISA-5.1 from memory. Many loop sheets in North America still reflect older identification habits. If 2024 5.1 changed a letter, balloon, or identification rule, the 2009 memory is an uncredited standard year. Search the supplied 2024 file.

Trap 3 — Confusing IEC 61508 with IEC 61511. 61508 is generic functional safety. 61511 is the process-sector SIS standard NCEES listed. A safety integrity level (SIL) narrative that is true in 61508 can still be the wrong citation—and a wrong citation gets no credit when the item is keyed to 61511-1 (2018).

Trap 4 — Assuming ISA-18.2 or IEC 62443 will be searchable. They will not. Do not plan an exam-day lookup of alarm rationalization worksheets or 62443 security levels.

Exam-day scenario: the 2009 balloon

Priya has marked up a 2009 ISA-5.1 at work for eight years. On a point-and-click P&ID item she is sure the balloon letter for a computing function is the 2009 letter she uses on her unit. She does not open the supplied ANSI/ISA-5.1 (2024) PDF because “I already know 5.1.” If 2024 reassigned or clarified that identification, her click is scored against 2024 , not against her plant culture. The correct move is a 20-second left-pane search on the function letter in the supplied 2024 file , then the click.

The same discipline applies to SIS. If a fill-in-the-blank asks for a 61511 Part 1 definition (for example a lifecycle phase name), search ISA/IEC 61511 Part 1 (2018) . Do not paste a 61508 term that is “close enough.” Close enough is a zero on an all-or-nothing item.

Practice this before exam day: log into MyNCEES, open the PE Control Systems Reference Handbook , and search the way the exam software searches. You cannot buy a printed NCEES handbook from NCEES to tab with sticky notes, and those tabs would be confiscated anyway.