Study guide

1.1 PE Power Exam Structure, Official Specification & NCEES Reference Strategy

PE Electrical and Computer Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & Power Engineering Fundamentals

1.1 PE Power Exam Structure, Official Specification & NCEES Reference Strategy 1.2 Units, Conversions, Engineering Constants & Fundamental Power Equations 1.3 Measurement & Metering Principles (Power, Energy, Power Factor) 1.4 Instrument Testing & Diagnostics (Insulation Megger & Ground Resistance)

2 Chapter 2: Circuit Analysis Fundamentals

2.1 DC Circuit Laws, Network Theorems (Thevenin, Norton, Superposition) & Transients 2.2 Single-Phase AC Steady-State Analysis, Phasors & Impedance 2.3 AC Power Relationships (Real, Reactive, Apparent Power & Power Factor Correction) 2.4 Resonance, Frequency Response & Harmonic Distortion

3 Chapter 3: Three-Phase Systems & Symmetrical Components

3.1 Three-Phase Circuit Analysis (Wye and Delta Configurations & Transformations) 3.2 Balanced Three-Phase Power Calculations & Phasor Relationships 3.3 The Per-Unit (pu) System: Bases, Conversions & System Modeling 3.4 Symmetrical Components (Fortescue Transformation, Sequence Networks & Unbalance)

4 Chapter 4: Electric Power Transformers

4.1 Transformer Theory, Equivalent Circuits & Open/Short-Circuit Testing 4.2 Transformer Voltage Regulation, Efficiency & Loss Calculations 4.3 Three-Phase Transformer Connections, Phase Shifts & Paralleling 4.4 Autotransformers, Instrument Transformers (CTs & VTs) & Special Transformers

5 Chapter 5: Rotating Machines: Induction & Synchronous

5.1 Three-Phase Induction Motors: Principles, Equivalent Circuits & Slip-Torque Characteristics 5.2 Induction Motor Starting, Speed Control & Braking Methods 5.3 Synchronous Generators: Operation, Excitation, Power-Angle Equations & V-Curves 5.4 Synchronous Motors & Condensers for Power Factor Correction

6 Chapter 6: DC Machines & Power Devices

6.1 DC Generators & Motors: Types (Shunt, Series, Compound), Characteristics & Speed Control 6.2 Power Capacitors, Shunt Reactors & Harmonic Filter Design 6.3 Battery Energy Storage Systems (BESS) & Ultra-Capacitors 6.4 Renewable Generation Integration: Solar Photovoltaics (PV) & Wind Power Systems

7 Chapter 7: Power Electronics & Industrial Controls

7.1 Power Semiconductor Switching Devices (Diodes, Thyristors, MOSFETs, IGBTs) 7.2 AC-to-DC Converters (Uncontrolled & Controlled Rectifiers) 7.3 DC-to-DC Switch-Mode Converters (Buck, Boost, Buck-Boost) & DC-AC Inverters 7.4 Variable Frequency Drives (VFDs), Motor Starters & Ladder Logic / PLC Controls

8 Chapter 8: Transmission & Distribution Systems

8.1 Transmission Line Parameters (Resistance, Inductance, Capacitance & GMD/GMR) 8.2 Line Models (Short, Medium Nominal-π, Long Lines) & ABCD Two-Port Parameters 8.3 Surge Impedance, Surge Impedance Loading (SIL) & Voltage Regulation 8.4 Distribution System Architectures, Voltage Drops & Feeder Loading 8.5 Power Flow Studies: Bus Classification, Y-Bus & Newton-Raphson Solutions 8.6 Power System Stability: Swing Equation, Equal-Area Criterion & Critical Clearing Time

9 Chapter 9: Power System Fault Analysis

9.1 Fault Analysis Fundamentals & Subtransient/Transient Machine Reactances 9.2 Three-Phase Symmetrical Fault Calculations 9.3 Single Line-to-Ground (SLG) & Line-to-Line (LL) Fault Analysis 9.4 Double Line-to-Ground (DLG) Faults & Bus Impedance Matrix (Zbus) Methods

10 Chapter 10: Power System Protection & Coordination

10.1 Protective Relaying Principles, IEEE Device Designations & Instrument Transformers 10.2 Overcurrent Protection (50/51), Time-Current Curves (TCC) & Relay Coordination 10.3 Differential Protection (87) for Transformers, Busbars & Generators 10.4 Distance / Impedance Protection (21) for Transmission Lines & Directional Relays (67)

11 Chapter 11: National Electrical Code (NEC) & Installation Design

11.1 NEC Fundamentals, Branch Circuit & Feeder Conductor Sizing (Ampacity & Derating) 11.2 Overcurrent Protection Sizing, Raceway Fill & Box Fill Calculations 11.3 Motor Branch Circuits, Controllers & Feeder Protection (NEC Article 430) 11.4 Grounding and Bonding Systems per NEC Article 250

12 Chapter 12: Electrical Safety, Standards & Facility Applications

12.1 Hazardous (Classified) Locations: Classes, Divisions, Zones, T-Codes & Sealing (NEC Articles 500-506) 12.2 Electrical Safety in the Workplace: NFPA 70E & Arc Flash Hazard Calculations 12.3 National Electrical Safety Code (NESC) Clearance & Utility Safety Requirements 12.4 Facility Applications: Illumination Design, Demand/Connected Loads & Lightning/Surge Protection 12.5 Special Occupancies & Systems: Health Care, Fire Pumps, Pools, Emergency & Standby (NEC Chapters 5-7)

1.1 PE Power Exam Structure, Official Specification & NCEES Reference Strategy

Key Takeaways Explain This Topic AI

The NCEES PE Electrical and Computer: Power exam is a year-round computer-based test of 80 questions, with 8 hours of exam time inside a 9-hour appointment (2-minute nondisclosure agreement, 8-minute tutorial, 8-hour exam, 50-minute scheduled break).

The exam is divided into two sections sharing one 480-minute clock; unused Section 1 time carries over, but Section 1 answers lock permanently on submission and unused break time never extends the exam clock.

The official specification (effective October 2025) defines nine knowledge areas, of which Electrical Safety, Circuit Analysis, and Protection each carry 10-15 questions while Rotating Machines carries only 5-8.

NCEES supplies the Power Reference Handbook plus six dated standards — NFPA 70-2020, NFPA 70E-2021, ANSI C2-2017, NFPA 497-2021, NFPA 499-2021, and NFPA 30B-2023 — and solutions based on any other revision year receive no credit.

NCEES does not publish a passing score and reports results only as pass/fail; the July 2026 pass rates for PE Power are 62% for first-time takers and 42% for repeat takers.

Last updated: August 2026

1.1 PE Electrical Exam Structure, CBT Format & NCEES Reference Strategy

The National Council of Examiners for Engineering and Surveying (NCEES) Principles and Practice of Engineering (PE) Electrical and Computer: Power Examination is the final examination requirement for professional engineering licensure in the electrical power discipline. Administered year-round as a Computer-Based Test (CBT) at authorized Pearson VUE testing centers worldwide, the exam evaluates technical competence across power system analysis, rotating machines, power electronics, transmission and distribution, protection and coordination, codes and standards, and electrical safety.

Achieving licensure as a Professional Engineer (PE) signifies legal authority to stamp and seal electrical engineering designs, serve as a principal of an engineering firm, and bid on public works. Mastering the administrative logistics, CBT testing environment, reference standards search strategy, and question pacing is just as vital to passing as technical subject matter knowledge.

  • 1. Exam Structure & Appointment Timeline
  • The PE Power examination appointment spans a total of 9 hours (540 minutes) . NCEES

publishes the breakdown exactly, and it accounts for every minute of the appointment:

  • Phase NCEES allotment
  • Nondisclosure agreement 2 minutes
  • Tutorial 8 minutes
  • Exam 8 hours (480 minutes)
  • Scheduled break 50 minutes

Total appointment 9 hours (540 minutes) +-----------------------------------------------------------------------------+

  • | NCEES PE POWER EXAM APPOINTMENT SCHEDULE |
  • | |
  • | [0:00 - 0:02] Nondisclosure Agreement (NDA) (2 Minutes) |
  • | [0:02 - 0:10] Interface Tutorial (8 Minutes) |
  • | [0:10 - ...] Section 1: approximately 40 questions (Self-Paced) |
  • | [MID-EXAM] Optional Scheduled Break (50 Minutes) |
  • | [... - 9:00] Section 2: remaining questions (Remaining Clock) |
  • | |
  • | *Total Exam Clock Time: 8.0 Hours (480 Minutes) for 80 Questions |
  • | *Total Appointment Time: 9.0 Hours (540 Minutes) |
  • +-----------------------------------------------------------------------------+
  • The Timing Rules That Actually Matter
  • NCEES states in the Examinee Guide that "the exam is divided into two sections. You will be
  • given the entire exam time at the beginning of the test. There are no individually timed

sections." Four consequences follow, and each one is a realistic exam-day trap:

Rule Operational consequence

One shared 480-minute clock The two sections are not separately budgeted. Time you do not spend in Section 1 carries straight over to Section 2.

Section 1 locks on submit After you review and submit approximately the first half of the questions, you can no longer access them. Everything flagged in Section 1 must be answered before you submit.

Unused break time is forfeited Returning early from the 50-minute scheduled break does not add time to the exam clock. There is no reward for a short break.

Unscheduled breaks cost exam time You may raise your hand for an unscheduled break at any point, but that time is deducted from your 480 minutes, and you may not leave the building.

  • Ending the 8-minute tutorial early likewise adds no time to the exam clock. If time expires
  • before you submit, any answers already marked are still submitted and scored — so a rushed,

fully-populated answer sheet always beats a careful, partially blank one.

Important

The Point of No Return: When you submit Section 1 to begin your 50-minute scheduled break, your answers for the first

~40 questions are permanently locked. You cannot revisit Section 1 during the second section.

Ensure every flagged question in Section 1 is answered before hitting submit.

  • 1a. The Official Exam Specification You Are Being Tested Against
  • Every question traces to one of nine knowledge areas in the NCEES specification Electrical
  • and Computer—Power CBT Exam Specifications, effective beginning with the October 2025
  • examination . The question counts below are the official published ranges, and they sum to the
  • 80-question exam. Memorize this table: it tells you exactly where your study hours earn the

most marks.

# Knowledge Area Questions Official sub-topics

1 Measurement and Instrumentation 6–9 Instrument transformers and metering; insulation testing; ground resistance testing

2 General Applications 8–12 Lightning protection; surge protection; illumination/lighting; energy management and demand calculations; grounding

3 Electrical Safety 10–15 Wiring methods and installations; hazardous locations; special occupancies and systems; shock and burns

4 Circuit Analysis 10–15 Three-phase circuits; symmetrical components; per-unit system; phasor diagrams; single-phase circuits; direct current circuits

5 Power Electronic Circuits and Control Devices 5–8 Power electronics (converters, inverter-based resources, VFDs); relays, switches, Boolean and ladder logic

6 Rotating Machines 5–8 Machine types and applications; motor starting

7 Electric Power Devices 8–12 Transformers; capacitors; electrical energy storage; alternative power generation; testing

8 Transmission and Distribution Analysis (High, Medium, and Low Voltage) 8–12 Voltage drop; voltage regulation and support; power factor correction; power quality; fault current analysis; transformer connections; power flow; power system stability

9 Protection 10–15 Overcurrent protection; protective relaying; protective devices; coordination

Three structural insights fall out of this table:

  • Electrical Safety, Circuit Analysis, and Protection each carry 10–15 questions. Together
  • those three areas can supply up to 45 of the 80 items — more than half the exam. Two of the

three (Safety, Protection) are dominated by code and standards lookup, not derivation.

Rotating Machines is only 5–8 questions. Candidates routinely over-invest here because the

material is familiar from undergraduate coursework. It is one of the two smallest areas.

NCEES states the listed knowledge areas "are not exclusive or exhaustive categories." The

sub-topics are examples of the kind of knowledge tested, not a closed checklist.

2. CBT Interface & On-Screen Reference Materials

The CBT exam is delivered on a high-resolution split-screen monitor (typically 24-inch or dual display). The screen is split vertically into two primary panes: +------------------------------------+----------------------------------------+

  • | LEFT PANE: REFERENCES | RIGHT PANE: EXAM QUESTION |
  • | | |
  • | [Search: transformer impedance ] | Question 24 of 80 [Flag] |
  • | [Bookmarks: TOC | Ch 1 | Ch 2... ] | |
  • | | A 3-phase, 480V, 100 kVA transformer |
  • | NCEES PE Power Reference Handbook | has a per-unit impedance of 0.045 pu. |
  • | | What is the available fault current at |
  • | Section 4.3: Transformer Modeling | the secondary terminals? |
  • | Z_base = (V_LL)^2 / S_3phase | |
  • | I_base = S_3phase / (sqrt(3)*V_LL)| ( ) A. 1,202 A |
  • | I_sc = I_base / Z_pu | ( ) B. 2,670 A |
  • | | ( ) C. 2,672 A |
  • | | ( ) D. 2,890 A |
  • | | |
  • | [ Zoom + / - ] [ Page 112 / 284 ] | [ < Previous ] [ Next > ] [ Review ] |
  • +------------------------------------+----------------------------------------+
  • Reference Documents Available on the Exam
  • During the examination, candidates have electronic PDF access exclusively to the official NCEES
  • PE Electrical and Computer: Power Reference Handbook plus six design standards. NCEES names
  • each standard with its revision year , and the specification states plainly that "solutions
  • to exam questions that reference a standard of practice are scored based on this list and the
  • revision year shown. Solutions based on other standards will not receive credit."

Standard Title Why it appears on this exam

NFPA 70-2020 National Electrical Code® Ampacity (Art. 310), overcurrent protection (Art. 240), grounding and bonding (Art. 250), motors (Art. 430), transformers (Art. 450), hazardous locations (Art. 500–516), special occupancies (Art. 511–555, 620–708)

NFPA 70E-2021 Standard for Electrical Safety in the Workplace Shock approach boundaries, arc flash boundary, incident energy, PPE categories, energized work permits

ANSI C2-2017 National Electrical Safety Code® (NESC) Utility overhead/underground clearances, loading districts, joint-use poles, substation safety

NFPA 497-2021 Recommended Practice for Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations Class I gas group and T-code assignment, extent-of-classification diagrams

NFPA 499-2021 Recommended Practice for Classification of Combustible Dusts and of Hazardous (Classified) Locations Class II dust group classification and layer ignition temperatures

NFPA 30B-2023 Code for the Manufacture and Storage of Aerosol Products Aerosol occupancy classification driving electrical area classification

  • The 2020 NEC is the scored edition. This is the single most expensive version trap on the
  • exam. If you study from the 2023 or 2026 NEC you will learn renumbered sections and revised
  • values — for example the ampacity adjustment and correction tables were reorganized after the
  • 2020 cycle — and a technically correct 2023-edition answer earns zero credit. Practice from the

2020 NEC, and confirm the edition on the cover page of the PDF the exam presents to you.

Two mechanical details of the on-screen references cost candidates real minutes:

  • Standards are served one chapter at a time. NCEES splits the design standards into
  • individual chapters so the exam software can handle large files, and only one chapter can be
  • open and searched at a time. You cannot run a single global search across the whole NEC — you

must know which chapter a rule lives in before you search.

  • The handbook and the standards remain available for the entire exam , including during
  • both sections. Obtain the current handbook from your MyNCEES account and study from it
  • directly; NCEES does not sell printed copies, and the handbook is the only formula reference

you will have.

Search Optimization Tactics

Targeted Exact Keyword Matching: The CBT PDF search engine matches exact strings. Avoid generic words like "power" or "transformer" (which generate hundreds of hits). Search specific terms like "Blondel" , "GMD" , "Kelvin" , "synchronous reactance" , or exact table numbers like "Table 310.16" .

Chapter-Level Table of Contents Navigation: Use the PDF bookmark side tree to jump directly to specific disciplines (e.g., Protection , Rotating Machines , Codes and Standards ) instead of scrolling sequentially.

Keyboard Shortcuts: Use standard navigation hotkeys ( Ctrl+F for search, Enter for next result, Shift+Enter for previous result) to minimize mouse travel.

3. Question Formats & Alternative Item Types (AITs)

While the majority of exam questions are traditional Multiple-Choice Questions (MCQs) with four options and one correct answer, NCEES incorporates Alternative Item Types (AITs) into the CBT pool. +-----------------------------------------------------------------------------+

  • | NCEES QUESTION FORMAT SUMMARY |
  • | |
  • | [1] Traditional Multiple-Choice (Single Response: A, B, C, D) |
  • | [2] Multiple-Select ("Select ALL that apply" or "Select THREE options") |
  • | [3] Point-and-Click (Click on a curve, phasor diagram, or schematic) |
  • | [4] Drag-and-Drop (Match labels, sequence steps, or assemble diagrams) |
  • | [5] Numeric Fill-in-the-Blank (Type the exact numerical value computed) |
  • +-----------------------------------------------------------------------------+
  • Breakdown of Alternative Item Types

Item Type Interface Action Candidate Strategy & Pitfalls

Multiple-Select Select checkboxes for all correct options. May state "Select two" or "Select all that apply" . No partial credit. Every correct box must be checked and no incorrect box checked. Evaluate each option as an independent True/False statement.

Point-and-Click Click a specific target zone on a graphic (e.g., operating point on an induction motor torque-slip curve, or an open disconnect on a one-line diagram). A target circle appears where clicked. Ensure the bullseye is positioned precisely within the intended graphical region or bus.

Drag-and-Drop Click and drag tokens (numbers, protective device IDs, wiring labels) into designated target slots. Used for single-line relay assignments (e.g., IEEE Device 50/51 vs 87), transformer winding polarity connections, or sequencing steps.

Fill-in-the-Blank Type a computed numerical value into a text box. Follow stated rounding instructions strictly (e.g., "round to the nearest tenth" or "enter to two decimal places" ). Do not include units in the input field unless specifically instructed.

  • 4. Scoring Methodology & Reported Results
  • NCEES uses criterion-referenced scoring : your performance is compared against a fixed

ability standard, not against other candidates. +-----------------------------------------------------------------------------+

  • | NCEES SCORING AND REPORTING FLOW |
  • | |
  • | [80 Exam Items] ==> [Scored Items + a limited number of unscored |
  • | pretest items, randomly placed and unidentifiable] |
  • | | |
  • | v |
  • | [Raw score -> Scaled score, adjusted for form difficulty] |
  • | | |
  • | v |
  • | [Compared to the required ability level, set by subject- |
  • | matter experts through psychometric statistical methods] |
  • | | |
  • | +--------------------------+--------------------------+ |
  • | v v |
  • | +---------------+ +---------------+ |
  • | | PASS | | FAIL | |
  • | | (No numerical | | (Diagnostic | |
  • | | score given) | | report by | |
  • | +---------------+ | subject area)| |
  • | +---------------+ |
  • +-----------------------------------------------------------------------------+

Key Scoring Facts (as published by NCEES):

  • No published passing score. NCEES states that it "does not publish the passing score
  • because it varies slightly based on difficulty." Any specific claim you encounter — 70%, or
  • 56 correct out of 80 — is not an NCEES figure. Your raw score is converted to a scaled

score that adjusts for minor difficulty differences between exam forms.

  • The standard is set by people, not by a curve. The required ability level "has been
  • determined by subject-matter experts through psychometric statistical methods," and NCEES
  • "scores each exam with no predetermined percentage of examinees that should pass or fail."

First-time takers and repeat takers are graded to the same standard.

  • Pretest items exist, but the count is not published. NCEES states that "all exams include
  • a limited number of pretest items that will not be scored," that they are "randomly placed
  • within the exam," and that they "are not identifiable as pretest items." Treat every question

as scored, because you cannot tell which are not.

  • No partial credit, and no penalty for guessing. All questions, including alternative item
  • types, are scored correct or incorrect. An unanswered question scores exactly the same as a

wrong guess. Never leave any question blank.

  • Current pass rates (NCEES, updated July 2026): first-time takers 62% (volume 1,344);
  • repeat takers 42% (volume 721). The roughly 20-point gap between first-time and repeat
  • performance is typical across PE disciplines and reflects candidate preparation, not a harsher

standard — NCEES grades both groups identically.

  • Results are pass/fail only. Computer-based results are typically available 7–10 days after
  • testing through your MyNCEES account. A failing report includes a diagnostic breakdown of

relative strengths and weaknesses by subject area; a passing report includes no numeric score.

5. Time Management & The 3-Pass Strategy

With 80 questions across 480 minutes of testing time, candidates have an average of 6.0 minutes (360 seconds) per question . +-----------------------------------------------------------------------------+

  • | THE 3-PASS PACING STRATEGY |
  • | |
  • | PASS 1: The Quick Solvers (0 - 3 Minutes per Question) |
  • | - Solve immediate conceptual questions, simple 1-step formulas, and |
  • | direct NEC code lookups. |
  • | - Flag any question requiring complex derivations or long calculations. |
  • | |
  • | PASS 2: The Core Calculations (4 - 7 Minutes per Question) |
  • | - Work through flagged fault calculations, transformer equivalent models, |
  • | unbalanced 3-phase circuits, and multi-step motor equations. |
  • | |
  • | PASS 3: The Grinders & Educated Guesses (Final 15-20 Minutes) |
  • | - Tackle unfamiliar code nuances, complex AITs, and tedious derivations. |
  • | - Eliminate impossible answers, make an educated guess on all remaining |
  • | unanswered items, and confirm 100% completion before submission. |
  • +-----------------------------------------------------------------------------+
  • Calculator Efficiency Strategy

NCEES permits only specific non-programmable scientific calculators (e.g., TI-36X Pro , Casio fx-115ES PLUS / fx-991EX , HP 35s ).

Complex Number Mode: Master rectangular-to-polar ( R ↔ P R \leftrightarrow P R ↔ P ) conversions, complex arithmetic ( ( V 1 ∠ θ 1 ) / ( Z ∠ θ 2 ) (\mathbf{V}_1 \angle \theta_1) / (\mathbf{Z} \angle \theta_2) ( V 1 ​ ∠ θ 1 ​ ) / ( Z ∠ θ 2 ​ ) ), and conjugate operations ( S = V I ∗ \mathbf{S} = \mathbf{V}\mathbf{I}^* S = V I ∗ ). Entering complex numbers directly in polar mode saves 2 to 3 minutes per AC circuit problem.

System of Linear Equations: Use the matrix/equation solver for 2 × 2 2 \times 2 2 × 2 and 3 × 3 3 \times 3 3 × 3 mesh/nodal equations.

Constant Storage: Store frequent constants (such as ω = 376.991 \omega = 376.991 ω = 376.991 , 3 ≈ 1.73205 \sqrt{3} \approx 1.73205 3 ​ ≈ 1.73205 , μ 0 = 1.2566 × 10 − 6 \mu_0 = 1.2566 \times 10^{-6} μ 0 ​ = 1.2566 × 1 0 − 6 ) into calculator memory registers ( A , B , C , D , X , Y A, B, C, D, X, Y A , B , C , D , X , Y ) at the start of each session.

  • 6. Exam Day Traps & Pitfalls +-----------------------------------------------------------------------------+
  • | TOP EXAM DAY PITFALLS |
  • | |
  • | [!] Uneven Time Allocation: Spending >10 minutes on a stubborn early |
  • | question in Session 1, leaving insufficient time for easy items. |
  • | [!] Reference Version Mismatch: Studying the 2023/2026 NEC instead of the |
  • | scored NFPA 70-2020 edition. Wrong-edition answers earn zero credit. |
  • | [!] Line-to-Line vs Line-to-Neutral Errors: Applying V_LL where V_LN is |
  • | required in per-phase equivalent circuits (missing the sqrt(3) factor)|
  • | [!] Sign Convention Inversion: Misinterpreting lagging vs leading vars |
  • | in power factor correction problems. |
  • | [!] Rounding Too Early: Rounding intermediate per-unit or impedance values|
  • | before the final calculation step, causing answer divergence. |
  • +-----------------------------------------------------------------------------+