Study guide
2.4 Biological Wastewater Treatment & Kinetics
PE Environmental Engineering Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 0: Introduction & Exam Overview
0.1 PE Environmental Exam Format & Strategy 0.2 How to Study & Use the NCEES Reference Handbook
2 Chapter 1: Water Quality, Regulations & Supply Hydraulics
1.1 Water Quality Standards, CWA & SDWA 1.2 Water Supply Hydraulics & Pipe Networks 1.3 Hydrology & Groundwater Hydraulics
3 Chapter 2: Physical, Chemical & Biological Water Treatment
2.1 Physical & Chemical Water Treatment 2.2 Water Softening & Advanced Membrane Processes 2.3 Disinfection Kinetics & Chemistry 2.4 Biological Wastewater Treatment & Kinetics
4 Chapter 3: Residuals & Sludge Engineering
3.1 Sludge Thickening & Digestion Kinetics 3.2 Dewatering, Biosolids Disposal & Land Application
5 Chapter 4: Municipal Solid Waste Engineering & Landfills
4.1 Solid Waste Characterization & RCRA Subtitle D 4.2 Collection, Processing & Resource Recovery 4.3 Landfill Engineering & Environmental Controls
6 Chapter 5: Hazardous Waste Engineering & Environmental Sustainability
5.1 Hazardous Waste Characterization & RCRA Subtitle C 5.2 Hazardous Waste Treatment & TSDF Operations 5.3 Life Cycle Assessment (LCA) & Carbon Footprint 5.4 Green Engineering & Sustainable Infrastructure
7 Chapter 6: Air Quality Regulations, Emissions & Particulate Control
6.1 Clean Air Act Regulatory Framework & Pollutants 6.2 Emission Estimation & Continuous Monitoring 6.3 Particulate Matter Control Systems
8 Chapter 7: Gaseous Air Pollution Control & Atmospheric Dispersion
7.1 Gaseous Pollutant Control Technologies 7.2 NOx Control Systems & Combustion Modification 7.3 Atmospheric Dispersion Modeling & Indoor Air Quality
9 Chapter 8: Site Assessment, Hydrogeology & Risk Assessment
8.1 Environmental Site Assessments & Site Characterization 8.2 Subsurface Contaminant Transport & Hydrogeology 8.3 Human Health & Ecological Risk Assessment
10 Chapter 9: Remediation Technologies & Occupational Health
9.1 Soil Remediation Technologies 9.2 Groundwater Remediation Technologies 9.3 Environmental Toxicology & Occupational Health
2.4 Biological Wastewater Treatment & Kinetics
Key Takeaways Explain This Topic AI
BOD5 measures the oxygen consumed by microbes over 5 days; ultimate BOD (L0) is the total oxygen demand.
Monod kinetics describe biological growth as a function of substrate concentration.
The Activated Sludge process is governed by SRT (Mean Cell Residence Time) and the F/M ratio.
Biological Nutrient Removal (BNR) removes nitrogen via aerobic nitrification followed by anoxic denitrification.
Technologies like MBRs and MBBRs provide advanced treatment in smaller footprints compared to conventional activated sludge.
Last updated: July 2026
Biological Wastewater Treatment & Kinetics
Biological treatment harnesses dense cultures of microorganisms to consume organic pollutants and nutrients from wastewater. The primary goal is the reduction of oxygen-demanding substances to protect receiving waters from oxygen depletion.
Biochemical Oxygen Demand (BOD) Kinetics
BOD is the standard measure of organic pollution. It quantifies the amount of dissolved oxygen consumed by microorganisms while stabilizing organic matter. The standard test is run for 5 days at 20 ∘ C 20^\circ C 2 0 ∘ C ( B O D 5 BOD_5 BO D 5 ).
The reaction follows first-order kinetics:
B O D t = L 0 ( 1 − e − k t ) BOD_t = L_0 (1 - e^{-kt}) BO D t = L 0 ( 1 − e − k t )
Where:
- B O D t BOD_t BO D t = Oxygen consumed at time t t t (mg/L)
- L 0 L_0 L 0 = Ultimate carbonaceous BOD (total oxygen demand, mg/L)
- k k k = BOD reaction rate constant ( d a y − 1 day^{-1} d a y − 1 , base e e e )
- t t t = Time (days)
While BOD measures biodegradable organics, Chemical Oxygen Demand (COD) uses a strong chemical oxidant (dichromate) to measure almost all organic matter. Therefore, COD is always greater than or equal to BOD.
Monod Substrate Utilization Kinetics
The growth of biomass in a reactor is limited by the availability of food (substrate). This is modeled by the Monod equation :
μ = μ m a x S K s + S \mu = \frac{\mu_{max} S}{K_s + S} μ = K s + S μ ma x S
Where:
- μ \mu μ = Specific growth rate of the biomass ( d a y − 1 day^{-1} d a y − 1 )
- μ m a x \mu_{max} μ ma x = Maximum specific growth rate
- S S S = Substrate concentration (mg/L of BOD)
K s K_s K s = Half-velocity constant (substrate concentration at which μ = 0.5 μ m a x \mu = 0.5 \mu_{max} μ = 0.5 μ ma x )
This demonstrates that at high substrate concentrations ( S ≫ K s S \gg K_s S ≫ K s ), growth is zero-order (maximum rate). At low concentrations ( S ≪ K s S \ll K_s S ≪ K s ), growth is first-order with respect to the substrate.
The Activated Sludge Process
Activated sludge is a suspended-growth process. Wastewater enters an aeration basin where mixed liquor (biomass + wastewater) is continuously aerated. The mixture then flows to a secondary clarifier, where the biomass settles. Most of the settled sludge is returned to the aeration basin (Return Activated Sludge, RAS) to maintain a high active biomass concentration, known as Mixed Liquor Suspended Solids (MLSS) . A fraction is wasted (Waste Activated Sludge, WAS) to control the system age.
Key Operational Parameters
Mean Cell Residence Time ( θ c \theta_c θ c or SRT) : Also known as Sludge Age. It is the average time a microbe spends in the system. S R T = Mass of MLSS in Aeration Basin Mass of Solids Wasted per Day = V ⋅ X Q w ⋅ X r + Q e f f ⋅ X e SRT = \frac{\text{Mass of MLSS in Aeration Basin}}{\text{Mass of Solids Wasted per Day}} = \frac{V \cdot X}{Q_w \cdot X_r + Q_{eff} \cdot X_e} SRT = Mass of Solids Wasted per Day Mass of MLSS in Aeration Basin = Q w ⋅ X r + Q e ff ⋅ X e V ⋅ X
Food-to-Microorganism Ratio (F/M) : Represents the daily organic loading per unit of biomass. F / M = Q ⋅ S 0 V ⋅ X F/M = \frac{Q \cdot S_0}{V \cdot X} F / M = V ⋅ X Q ⋅ S 0 Where Q Q Q is inflow, S 0 S_0 S 0 is influent BOD, V V V is basin volume, and X X X is MLSS concentration. A low F/M ratio corresponds to a high SRT (starvation conditions, good settling). A high F/M ratio corresponds to a low SRT (rapid growth, poor settling).
Hydraulic Retention Time (HRT) : The average time water spends in the aeration basin. H R T = V / Q HRT = V / Q H RT = V / Q .
Attached Growth and Advanced Technologies
Trickling Filters : Fixed-film systems where wastewater is distributed over a bed of rocks or plastic media. Microbes form a biofilm on the media. Oxygen is supplied by natural draft.
Moving Bed Biofilm Reactors (MBBR) : Suspended plastic carriers provide surface area for biofilm growth within an aerated tank. It combines the benefits of activated sludge and fixed-film systems.
Membrane Bioreactors (MBR) : Replaces the secondary clarifier of the activated sludge process with microfiltration or ultrafiltration membranes immersed directly in the aeration basin. This allows for extremely high MLSS concentrations and a very small physical footprint, producing high-quality effluent.
Biological Nutrient Removal (BNR)
Conventional activated sludge removes carbon but not nitrogen or phosphorus. BNR requires specific environmental zones (aerobic, anoxic, and anaerobic).
Nitrogen Removal
Nitrification : An aerobic process where autotrophic bacteria (Nitrosomonas and Nitrobacter) oxidize toxic ammonia to nitrite, then to nitrate. N H 4 + + 2 O 2 → N O 3 − + 2 H + + H 2 O NH_4^+ + 2O_2 \rightarrow NO_3^- + 2H^+ + H_2O N H 4 + + 2 O 2 → N O 3 − + 2 H + + H 2 O This process requires immense amounts of oxygen and destroys alkalinity, lowering the pH.
Denitrification : An anoxic process (no dissolved oxygen, but nitrate is present). Heterotrophic bacteria strip the oxygen from nitrate, releasing harmless nitrogen gas. N O 3 − + Organics → N 2 ( g ) + C O 2 + H 2 O NO_3^- + \text{Organics} \rightarrow N_2(g) + CO_2 + H_2O N O 3 − + Organics → N 2 ( g ) + C O 2 + H 2 O
Enhanced Biological Phosphorus Removal (EBPR)
EBPR involves cycling biomass through an anaerobic zone (no DO, no nitrate) followed by an aerobic zone. Under anaerobic stress, Phosphorus Accumulating Organisms (PAOs) release phosphorus to consume volatile fatty acids. When subsequently aerated, they undergo "luxury uptake," consuming much more phosphorus than they released. The phosphorus is permanently removed when the sludge is wasted.