Study guide
2.3 Disinfection Kinetics & Chemistry
PE Environmental Engineering Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 0: Introduction & Exam Overview
0.1 PE Environmental Exam Format & Strategy 0.2 How to Study & Use the NCEES Reference Handbook
2 Chapter 1: Water Quality, Regulations & Supply Hydraulics
1.1 Water Quality Standards, CWA & SDWA 1.2 Water Supply Hydraulics & Pipe Networks 1.3 Hydrology & Groundwater Hydraulics
3 Chapter 2: Physical, Chemical & Biological Water Treatment
2.1 Physical & Chemical Water Treatment 2.2 Water Softening & Advanced Membrane Processes 2.3 Disinfection Kinetics & Chemistry 2.4 Biological Wastewater Treatment & Kinetics
4 Chapter 3: Residuals & Sludge Engineering
3.1 Sludge Thickening & Digestion Kinetics 3.2 Dewatering, Biosolids Disposal & Land Application
5 Chapter 4: Municipal Solid Waste Engineering & Landfills
4.1 Solid Waste Characterization & RCRA Subtitle D 4.2 Collection, Processing & Resource Recovery 4.3 Landfill Engineering & Environmental Controls
6 Chapter 5: Hazardous Waste Engineering & Environmental Sustainability
5.1 Hazardous Waste Characterization & RCRA Subtitle C 5.2 Hazardous Waste Treatment & TSDF Operations 5.3 Life Cycle Assessment (LCA) & Carbon Footprint 5.4 Green Engineering & Sustainable Infrastructure
7 Chapter 6: Air Quality Regulations, Emissions & Particulate Control
6.1 Clean Air Act Regulatory Framework & Pollutants 6.2 Emission Estimation & Continuous Monitoring 6.3 Particulate Matter Control Systems
8 Chapter 7: Gaseous Air Pollution Control & Atmospheric Dispersion
7.1 Gaseous Pollutant Control Technologies 7.2 NOx Control Systems & Combustion Modification 7.3 Atmospheric Dispersion Modeling & Indoor Air Quality
9 Chapter 8: Site Assessment, Hydrogeology & Risk Assessment
8.1 Environmental Site Assessments & Site Characterization 8.2 Subsurface Contaminant Transport & Hydrogeology 8.3 Human Health & Ecological Risk Assessment
10 Chapter 9: Remediation Technologies & Occupational Health
9.1 Soil Remediation Technologies 9.2 Groundwater Remediation Technologies 9.3 Environmental Toxicology & Occupational Health
2.3 Disinfection Kinetics & Chemistry
Key Takeaways Explain This Topic AI
The Chick-Watson law models disinfection kinetics based on contact time and disinfectant concentration.
The CT concept is used to meet regulatory requirements for log inactivation of pathogens like Giardia.
Free chlorine consists of HOCl and OCl-, with HOCl being the significantly more potent disinfectant.
Chloramines (combined chlorine) provide a longer-lasting residual but are weaker disinfectants.
Alternative disinfectants like Ozone and UV don't leave a residual; DBPs like THMs form when chlorine reacts with natural organic matter.
Last updated: July 2026
Disinfection Kinetics & Chemistry
Disinfection is the mandatory final barrier in municipal water treatment, engineered to deactivate or destroy pathogenic micro-organisms (bacteria, viruses, and protozoan parasites such as Giardia lamblia and Cryptosporidium parvum ). Disinfection is a chemical kinetic process governed by disinfectant type, chemical concentration, exposure time, pH, temperature, and water matrix chemistry. Mastering Chick-Watson kinetics, the EPA C T CT CT concept, chlorine speciation equilibrium, breakpoint chlorination pathways, and disinfection byproduct (DBP) regulations is essential for NCEES PE exam calculations.
Disinfection Kinetics: Chick's Law & The Chick-Watson Model
Disinfection decay kinetics evaluate microbial survival as a function of disinfectant exposure over time.
Mathematical Kinetic Derivations
Chick's Law (First-Order Microbial Inactivation): Assumes a constant disinfectant concentration and first-order decay of viable organisms: d N d t = − k N ⟹ ln ( N N 0 ) = − k t \frac{dN}{dt} = -k N \implies \ln\left(\frac{N}{N_0}\right) = -k t d t d N = − k N ⟹ ln ( N 0 N ) = − k t
Chick-Watson Law: Incorporates disinfectant concentration ( C C C , in m g / L mg/L m g / L ) raised to a coefficient of dilution ( n n n ): ln ( N N 0 ) = − k C n t \ln\left(\frac{N}{N_0}\right) = -k C^n t ln ( N 0 N ) = − k C n t
Where:
- N 0 N_0 N 0 = Initial concentration of viable micro-organisms
- N N N = Surviving micro-organism concentration at time t t t
- k k k = Specific lethality coefficient ( L / m g ⋅ m i n L/mg\cdot min L / m g ⋅ min )
- C C C = Residual disinfectant concentration ( m g / L mg/L m g / L )
n n n = Coefficient of dilution (when n = 1 n=1 n = 1 , disinfection efficiency is equally sensitive to concentration and contact time)
t t t = Contact time ( m i n min min )
Hom-Haseman Model: Accounts for initial lag phases (shoulder curves) or declining inactivation rates (retarding curves): ln ( N N 0 ) = − k C n t m \ln\left(\frac{N}{N_0}\right) = -k C^n t^m ln ( N 0 N ) = − k C n t m
Log Inactivation & Removal Efficiency
Microbial reduction is expressed as "log inactivation": Log Inactivation = log 10 ( N 0 N ) = − log 10 ( 100 − % Inactivation 100 ) \text{Log Inactivation} = \log_{10}\left(\frac{N_0}{N}\right) = -\log_{10}\left(\frac{100 - \% \text{ Inactivation}}{100}\right) Log Inactivation = lo g 10 ( N N 0 ) = − lo g 10 ( 100 100 − % Inactivation )
- 2-log inactivation: 99 % 99\% 99% reduction ( N / N 0 = 0.01 N/N_0 = 0.01 N / N 0 = 0.01 )
- 3-log inactivation: 99.9 % 99.9\% 99.9% reduction ( N / N 0 = 0.001 N/N_0 = 0.001 N / N 0 = 0.001 )
- 4-log inactivation: 99.99 % 99.99\% 99.99% reduction ( N / N 0 = 0.0001 N/N_0 = 0.0001 N / N 0 = 0.0001 )
- The EPA C T CT CT Concept & Contact Basin Hydraulics
Under the EPA Safe Drinking Water Act Surface Water Treatment Rule (SWTR), disinfection compliance is demonstrated using the C T CT CT parameter ( m g ⋅ m i n / L mg\cdot min/L m g ⋅ min / L ): C T c a l c = C a c t u a l × T 10 CT_{calc} = C_{actual} \times T_{10} C T c a l c = C a c t u a l × T 10
Where:
C a c t u a l C_{actual} C a c t u a l = Residual disinfectant concentration measured at the basin exit ( m g / L mg/L m g / L )
T 10 T_{10} T 10 = Hydraulic contact time required for 90 % 90\% 90% of the water to pass through the contact basin ( m i n min min )
Hydraulic Baffling Factors
Ideal plug flow is never achieved in real basins due to short-circuiting and dead zones. T 10 T_{10} T 10 is calculated using the theoretical hydraulic detention time ( T = V / Q T = V/Q T = V / Q ) modified by a baffling factor ( B F = T 10 / T BF = T_{10}/T BF = T 10 / T ) : T 10 = T × B F = ( V Q ) × B F T_{10} = T \times BF = \left(\frac{V}{Q}\right) \times BF T 10 = T × BF = ( Q V ) × BF
- Unbaffled / Single-inlet basin: B F ≈ 0.10 BF \approx 0.10 BF ≈ 0.10
- Poor baffling: B F ≈ 0.30 BF \approx 0.30 BF ≈ 0.30
- Average baffling: B F ≈ 0.50 BF \approx 0.50 BF ≈ 0.50
- Superior serpentine baffling: B F ≈ 0.70 BF \approx 0.70 BF ≈ 0.70
- Perfect plug flow pipe reactor: B F = 1.00 BF = 1.00 BF = 1.00
Required C T r e q CT_{req} C T re q values for target log inactivations (e.g., 3-log Giardia , 4-log Virus) are published in EPA lookup tables. C T r e q CT_{req} C T re q increases substantially at lower temperatures and higher pH levels.
Aqueous Chlorine Chemistry & Equilibrium Speciation
Chlorine gas ( C l 2 Cl_2 C l 2 ) or sodium hypochlorite ( N a O C l NaOCl N a OCl ) added to water hydrolyzes rapidly ( < 1 second <1 \text{ second} < 1 second ): C l 2 ( g ) + H 2 O → H O C l + H + + C l − Cl_2(g) + H_2O \rightarrow HOCl + H^+ + Cl^- C l 2 ( g ) + H 2 O → H OCl + H + + C l − N a O C l + H 2 O → H O C l + N a + + O H − NaOCl + H_2O \rightarrow HOCl + Na^+ + OH^- N a OCl + H 2 O → H OCl + N a + + O H −
Weak Acid Dissociation of Hypochlorous Acid
Hypochlorous acid ( H O C l HOCl H OCl ) is a weak acid that reversibly dissociates into hydrogen ion ( H + H^+ H + ) and hypochlorite ion ( O C l − OCl^- OC l − ): H O C l ⇌ H + + O C l − ( p K a ≈ 7.54 at 25 ∘ C ) HOCl \rightleftharpoons H^+ + OCl^- \quad (pK_a \approx 7.54 \text{ at } 25^\circ C) H OCl ⇌ H + + OC l − ( p K a ≈ 7.54 at 2 5 ∘ C )
The concentration sum [ H O C l ] + [ O C l − ] [HOCl] + [OCl^-] [ H OCl ] + [ OC l − ] represents Free Available Chlorine . The fraction of hypochlorous acid ( α H O C l \alpha_{HOCl} α H OCl ) is controlled strictly by pH: α H O C l = [ H O C l ] [ H O C l ] + [ O C l − ] = 1 1 + 10 pH − p K a \alpha_{HOCl} = \frac{[HOCl]}{[HOCl] + [OCl^-]} = \frac{1}{1 + 10^{\text{pH} - pK_a}} α H OCl = [ H OCl ] + [ OC l − ] [ H OCl ] = 1 + 1 0 pH − p K a 1
At pH 6.0: α H O C l ≈ 97 % \alpha_{HOCl} \approx 97\% α H OCl ≈ 97% H O C l HOCl H OCl
At pH 7.54: α H O C l = 50 % \alpha_{HOCl} = 50\% α H OCl = 50% H O C l HOCl H OCl , 50 % 50\% 50% O C l − OCl^- OC l −
At pH 9.0: α H O C l ≈ 3 % \alpha_{HOCl} \approx 3\% α H OCl ≈ 3% H O C l HOCl H OCl
Disinfection Implication: H O C l HOCl H OCl is 80 − 100 80 - 100 80 − 100 times more effective at pathogen cell membrane penetration than the negatively charged O C l − OCl^- OC l − ion. Consequently, free chlorine disinfection is far more potent at lower pH ( < 7.5 < 7.5 < 7.5 ).
Breakpoint Chlorination Chemistry
When raw water contains ammonia ( N H 3 NH_3 N H 3 ), free chlorine reacts step-wise to form chloramines (combined chlorine):
Monochloramine Formation: H O C l + N H 3 → N H 2 C l + H 2 O HOCl + NH_3 \rightarrow NH_2Cl + H_2O H OCl + N H 3 → N H 2 Cl + H 2 O
Dichloramine Formation: H O C l + N H 2 C l → N H C l 2 + H 2 O HOCl + NH_2Cl \rightarrow NHCl_2 + H_2O H OCl + N H 2 Cl → N H C l 2 + H 2 O
Trichloramine Formation: H O C l + N H C l 2 → N C l 3 + H 2 O HOCl + NHCl_2 \rightarrow NCl_3 + H_2O H OCl + N H C l 2 → NC l 3 + H 2 O
The Breakpoint Curve Phases
As the dosage of chlorine to ammonia ratio ( C l 2 : N H 3 − N Cl_2 : NH_3-N C l 2 : N H 3 − N ) increases:
Zone 1 (Initial Chlorine Demand): Chlorine reacts with reducing agents ( F e 2 + , M n 2 + , H 2 S Fe^{2+}, Mn^{2+}, H_2S F e 2 + , M n 2 + , H 2 S ). No residual forms.
Zone 2 (Combined Residual Formation): Chlorine reacts with ammonia to form monochloramine and dichloramine. Combined residual rises to a peak at a C l 2 : N Cl_2:N C l 2 : N weight ratio of ∼ 5 : 1 \sim 5:1 ∼ 5 : 1 .
Zone 3 (Anoxic Oxidation / Breakpoint Dip): Additional chlorine oxidizes chloramines into nitrogen gas ( N 2 N_2 N 2 ) and nitrous oxide ( N 2 O N_2O N 2 O ), destroying combined chlorine. The residual drops to a minimum (the Breakpoint ) at a C l 2 : N Cl_2:N C l 2 : N weight ratio of ∼ 8 : 1 − 10 : 1 \sim 8:1 - 10:1 ∼ 8 : 1 − 10 : 1 .
Zone 4 (Free Chlorine Residual Accumulation): Past the breakpoint, all ammonia is destroyed. Any additional chlorine added forms true Free Available Chlorine ( H O C l + O C l − HOCl + OCl^- H OCl + OC l − ).
Alternative Disinfectants & Disinfection Byproducts (DBPs)
Disinfectant Primary Advantages Major Disadvantages / DBPs
Free Chlorine ( C l 2 , N a O C l Cl_2, NaOCl C l 2 , N a OCl ) Strong oxidant, leaves persistent residual, inexpensive Forms Trihalomethanes (THMs) and Haloacetic Acids (HAAs) with NOM
Chloramines ( N H 2 C l NH_2Cl N H 2 Cl ) Highly stable long-term residual, minimal THM/HAA formation Weak disinfectant ( C T CT CT values ∼ 100 × \sim 100\times ∼ 100 × higher than free C l 2 Cl_2 C l 2 ), risk of nitrification
Ozone ( O 3 O_3 O 3 ) Extremely strong oxidant, highly effective against Cryptosporidium No distribution residual, high capital cost, forms Bromate ( B r O 3 − BrO_3^- B r O 3 − ) if B r − Br^- B r − present
UV Light ( 254 n m 254 \ nm 254 nm ) Inactivates Giardia & Crypto at low doses ( m J / c m 2 mJ/cm^2 m J / c m 2 ) without chemicals No distribution residual, requires low turbidity / high UV transmittance (UVT)
Chlorine Dioxide ( C l O 2 ClO_2 Cl O 2 ) Powerful oxidant independent of pH, does not react with ammonia Requires on-site generation, forms Chlorite ( C l O 2 − ClO_2^- Cl O 2 − ) and Chlorate ( C l O 3 − ClO_3^- Cl O 3 − )
Disinfection Byproduct Regulations (Stage 1 & Stage 2 DBPR)
Reaction of chlorine or ozone with Natural Organic Matter (NOM, measured as TOC) produces regulated DBPs:
Total Trihalomethanes (TTHM): 80 μ g / L 80 \ \mu g/L 80 μg / L limit (Chloroform, Bromoform, Bromodichloromethane, Dibromochloromethane).
Haloacetic Acids (HAA5): 60 μ g / L 60 \ \mu g/L 60 μg / L limit (Monochloroacetic, Dichloroacetic, Trichloroacetic, Monobromoacetic, Dibromoacetic acids).
Bromate ( B r O 3 − BrO_3^- B r O 3 − ): 10 μ g / L 10 \ \mu g/L 10 μg / L limit (Ozonation DBP).
Chlorite ( C l O 2 − ClO_2^- Cl O 2 − ): 1.0 m g / L 1.0 \ mg/L 1.0 m g / L limit ( C l O 2 ClO_2 Cl O 2 DBP).
Compliance under Stage 2 DBPR is evaluated using a Locational Running Annual Average (LRAA) at individual monitoring sites across the distribution system.