Study guide

2.2 Water Softening & Advanced Membrane Processes

PE Environmental Engineering Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 0: Introduction & Exam Overview

0.1 PE Environmental Exam Format & Strategy 0.2 How to Study & Use the NCEES Reference Handbook

2 Chapter 1: Water Quality, Regulations & Supply Hydraulics

1.1 Water Quality Standards, CWA & SDWA 1.2 Water Supply Hydraulics & Pipe Networks 1.3 Hydrology & Groundwater Hydraulics

3 Chapter 2: Physical, Chemical & Biological Water Treatment

2.1 Physical & Chemical Water Treatment 2.2 Water Softening & Advanced Membrane Processes 2.3 Disinfection Kinetics & Chemistry 2.4 Biological Wastewater Treatment & Kinetics

4 Chapter 3: Residuals & Sludge Engineering

3.1 Sludge Thickening & Digestion Kinetics 3.2 Dewatering, Biosolids Disposal & Land Application

5 Chapter 4: Municipal Solid Waste Engineering & Landfills

4.1 Solid Waste Characterization & RCRA Subtitle D 4.2 Collection, Processing & Resource Recovery 4.3 Landfill Engineering & Environmental Controls

6 Chapter 5: Hazardous Waste Engineering & Environmental Sustainability

5.1 Hazardous Waste Characterization & RCRA Subtitle C 5.2 Hazardous Waste Treatment & TSDF Operations 5.3 Life Cycle Assessment (LCA) & Carbon Footprint 5.4 Green Engineering & Sustainable Infrastructure

7 Chapter 6: Air Quality Regulations, Emissions & Particulate Control

6.1 Clean Air Act Regulatory Framework & Pollutants 6.2 Emission Estimation & Continuous Monitoring 6.3 Particulate Matter Control Systems

8 Chapter 7: Gaseous Air Pollution Control & Atmospheric Dispersion

7.1 Gaseous Pollutant Control Technologies 7.2 NOx Control Systems & Combustion Modification 7.3 Atmospheric Dispersion Modeling & Indoor Air Quality

9 Chapter 8: Site Assessment, Hydrogeology & Risk Assessment

8.1 Environmental Site Assessments & Site Characterization 8.2 Subsurface Contaminant Transport & Hydrogeology 8.3 Human Health & Ecological Risk Assessment

10 Chapter 9: Remediation Technologies & Occupational Health

9.1 Soil Remediation Technologies 9.2 Groundwater Remediation Technologies 9.3 Environmental Toxicology & Occupational Health

2.2 Water Softening & Advanced Membrane Processes

Key Takeaways Explain This Topic AI

Lime-soda ash softening removes hardness by precipitating calcium as calcium carbonate and magnesium as magnesium hydroxide.

Carbonate hardness is removed with lime; non-carbonate hardness requires soda ash.

Ion exchange uses resin to swap calcium and magnesium ions for sodium ions, requiring regeneration with NaCl.

Membrane flux is directly proportional to the transmembrane pressure minus the osmotic pressure difference.

RO membranes can remove dissolved salts, whereas MF and UF generally only remove particulate matter and macromolecules.

Last updated: July 2026

Water Softening & Advanced Membrane Processes

Water softening is the process of removing hardness-causing cations, primarily calcium ( C a 2 + Ca^{2+} C a 2 + ) and magnesium ( M g 2 + Mg^{2+} M g 2 + ), from water. Hard water leads to severe scaling in municipal distribution networks, industrial heat exchangers, boilers, and domestic appliances, while significantly suppressing the lathering action of soaps. Understanding the chemistry of chemical precipitation (lime-soda ash softening), ion exchange dynamics, and advanced pressure-driven membrane filtration systems is essential for environmental engineering practice and NCEES PE exam calculations.

Hardness Classification & Bar Graph Equivalence

Total Hardness (TH) is defined quantitatively as the sum of all multivalent metallic cations in solution, expressed in terms of calcium carbonate ( C a C O 3 CaCO_3 C a C O 3 ​ ) equivalence ( m g / L as C a C O 3 mg/L \text{ as } CaCO_3 m g / L as C a C O 3 ​ ): T H = C a 2 + + M g 2 + + other multivalent cations TH = Ca^{2+} + Mg^{2+} + \text{other multivalent cations} T H = C a 2 + + M g 2 + + other multivalent cations

Hardness is subdivided based on the anion species present in the water:

Carbonate Hardness (CH): Hardness chemically associated with bicarbonate ( H C O 3 − HCO_3^- H C O 3 − ​ ) and carbonate ( C O 3 2 − CO_3^{2-} C O 3 2 − ​ ) alkalinity. C H = min ⁡ ( T H , Alkalinity ) CH = \min(TH, \text{Alkalinity}) C H = min ( T H , Alkalinity ) .

Non-Carbonate Hardness (NCH): Hardness associated with non-alkalinity anions such as sulfate ( S O 4 2 − SO_4^{2-} S O 4 2 − ​ ), chloride ( C l − Cl^- C l − ), and nitrate ( N O 3 − NO_3^- N O 3 − ​ ). N C H = T H − C H NCH = TH - CH NC H = T H − C H . If T H ≤ Alkalinity TH \le \text{Alkalinity} T H ≤ Alkalinity , then N C H = 0 NCH = 0 NC H = 0 .

Calcium Hardness (CH) vs. Magnesium Hardness (MH): T H = C a 2 + + M g 2 + TH = Ca^{2+} + Mg^{2+} T H = C a 2 + + M g 2 + . Calcium precipitates readily at lower pH ($

To construct a milliequivalent bar graph or calculate chemical doses, concentrations in m g / L mg/L m g / L of specific ions are converted to m g / L as C a C O 3 mg/L \text{ as } CaCO_3 m g / L as C a C O 3 ​ using their equivalent weights ( E W EW E W ): Concentration as C a C O 3 ( m g / L ) = Concentration of Ion ( m g / L ) × E W C a C O 3 E W I o n \text{Concentration as } CaCO_3 (mg/L) = \text{Concentration of Ion } (mg/L) \times \frac{EW_{CaCO_3}}{EW_{Ion}} Concentration as C a C O 3 ​ ( m g / L ) = Concentration of Ion ( m g / L ) × E W I o n ​ E W C a C O 3 ​ ​ ​

Where E W C a C O 3 = 50.05 g/eq EW_{CaCO_3} = 50.05 \text{ g/eq} E W C a C O 3 ​ ​ = 50.05 g/eq , E W C a 2 + = 20.04 g/eq EW_{Ca^{2+}} = 20.04 \text{ g/eq} E W C a 2 + ​ = 20.04 g/eq , E W M g 2 + = 12.15 g/eq EW_{Mg^{2+}} = 12.15 \text{ g/eq} E W M g 2 + ​ = 12.15 g/eq , E W H C O 3 − = 61.02 g/eq EW_{HCO_3^-} = 61.02 \text{ g/eq} E W H C O 3 − ​ ​ = 61.02 g/eq , and E W C O 2 = 22.0 g/eq EW_{CO_2} = 22.0 \text{ g/eq} E W C O 2 ​ ​ = 22.0 g/eq ( C O 2 CO_2 C O 2 ​ equivalent weight is based on 2 eq/mol).

Lime-Soda Ash Softening Chemistry & Stoichiometry

Chemical precipitation softening uses hydrated lime ( C a ( O H ) 2 Ca(OH)_2 C a ( O H ) 2 ​ ) and soda ash ( N a 2 C O 3 Na_2CO_3 N a 2 ​ C O 3 ​ ) to drive C a 2 + Ca^{2+} C a 2 + and M g 2 + Mg^{2+} M g 2 + ions past their solubility limits, precipitating them as solid calcium carbonate ( C a C O 3 ( s ) CaCO_3(s) C a C O 3 ​ ( s ) , K s p ≈ 4.8 × 10 − 9 K_{sp} \approx 4.8 \times 10^{-9} K s p ​ ≈ 4.8 × 1 0 − 9 ) and magnesium hydroxide ( M g ( O H ) 2 ( s ) Mg(OH)_2(s) M g ( O H ) 2 ​ ( s ) , K s p ≈ 5.6 × 10 − 12 K_{sp} \approx 5.6 \times 10^{-12} K s p ​ ≈ 5.6 × 1 0 − 12 ).

Stoichiometric Precipitation Reactions

Neutralization of Dissolved Carbon Dioxide ( C O 2 CO_2 C O 2 ​ ): Dissolved C O 2 CO_2 C O 2 ​ does not contribute to hardness but consumes lime prior to hardness removal: C O 2 + C a ( O H ) 2 → C a C O 3 ( s ) + H 2 O CO_2 + Ca(OH)_2 \rightarrow CaCO_3(s) + H_2O C O 2 ​ + C a ( O H ) 2 ​ → C a C O 3 ​ ( s ) + H 2 ​ O

(Lime Demand = 1.0 eq of Lime per eq of C O 2 1.0 \text{ eq of Lime per eq of } CO_2 1.0 eq of Lime per eq of C O 2 ​ )

Precipitation of Calcium Carbonate Hardness: Bicarbonate alkalinity reacts with lime at pH ≈ 9.3 − 10.0 \text{pH} \approx 9.3 - 10.0 pH ≈ 9.3 − 10.0 : C a ( H C O 3 ) 2 + C a ( O H ) 2 → 2 C a C O 3 ( s ) + 2 H 2 O Ca(HCO_3)_2 + Ca(OH)_2 \rightarrow 2CaCO_3(s) + 2H_2O C a ( H C O 3 ​ ) 2 ​ + C a ( O H ) 2 ​ → 2 C a C O 3 ​ ( s ) + 2 H 2 ​ O

(Lime Demand = 1.0 eq of Lime per eq of C a 2 + CH 1.0 \text{ eq of Lime per eq of } Ca^{2+} \text{ CH} 1.0 eq of Lime per eq of C a 2 + CH )

Precipitation of Magnesium Carbonate Hardness: Precipitating M g 2 + Mg^{2+} M g 2 + requires elevating the pH above 10.6 − 11.0 10.6 - 11.0 10.6 − 11.0 to form M g ( O H ) 2 Mg(OH)_2 M g ( O H ) 2 ​ . This requires two equivalents of lime: M g ( H C O 3 ) 2 + 2 C a ( O H ) 2 → M g ( O H ) 2 ( s ) + 2 C a C O 3 ( s ) + 2 H 2 O Mg(HCO_3)_2 + 2Ca(OH)_2 \rightarrow Mg(OH)_2(s) + 2CaCO_3(s) + 2H_2O M g ( H C O 3 ​ ) 2 ​ + 2 C a ( O H ) 2 ​ → M g ( O H ) 2 ​ ( s ) + 2 C a C O 3 ​ ( s ) + 2 H 2 ​ O

(Lime Demand = 2.0 eq of Lime per eq of M g 2 + CH 2.0 \text{ eq of Lime per eq of } Mg^{2+} \text{ CH} 2.0 eq of Lime per eq of M g 2 + CH )

Precipitation of Calcium Non-Carbonate Hardness: Calcium NCH (e.g., C a S O 4 CaSO_4 C a S O 4 ​ ) requires soda ash to supply the necessary carbonate ion: C a S O 4 + N a 2 C O 3 → C a C O 3 ( s ) + N a 2 S O 4 CaSO_4 + Na_2CO_3 \rightarrow CaCO_3(s) + Na_2SO_4 C a S O 4 ​ + N a 2 ​ C O 3 ​ → C a C O 3 ​ ( s ) + N a 2 ​ S O 4 ​

(Soda Ash Demand = 1.0 eq of Soda Ash per eq of C a 2 + NCH 1.0 \text{ eq of Soda Ash per eq of } Ca^{2+} \text{ NCH} 1.0 eq of Soda Ash per eq of C a 2 + NCH )

Precipitation of Magnesium Non-Carbonate Hardness: Magnesium NCH requires both lime (to convert M g 2 + Mg^{2+} M g 2 + to M g ( O H ) 2 Mg(OH)_2 M g ( O H ) 2 ​ ) and soda ash (to precipitate the added calcium): M g S O 4 + C a ( O H ) 2 + N a 2 C O 3 → M g ( O H ) 2 ( s ) + C a C O 3 ( s ) + N a 2 S O 4 MgSO_4 + Ca(OH)_2 + Na_2CO_3 \rightarrow Mg(OH)_2(s) + CaCO_3(s) + Na_2SO_4 M g S O 4 ​ + C a ( O H ) 2 ​ + N a 2 ​ C O 3 ​ → M g ( O H ) 2 ​ ( s ) + C a C O 3 ​ ( s ) + N a 2 ​ S O 4 ​

(Lime Demand = 1.0 eq 1.0 \text{ eq} 1.0 eq , Soda Ash Demand = 1.0 eq per eq of M g 2 + NCH 1.0 \text{ eq per eq of } Mg^{2+} \text{ NCH} 1.0 eq per eq of M g 2 + NCH )

Excess Lime, Split Treatment & Recarbonation

To ensure complete removal of M g ( O H ) 2 Mg(OH)_2 M g ( O H ) 2 ​ , an excess lime dose of 35 − 50 m g / L as C a C O 3 35 - 50 \ mg/L \text{ as } CaCO_3 35 − 50 m g / L as C a C O 3 ​ is added to maintain a high pH ( > 11.0 > 11.0 > 11.0 ). In split-treatment design , a portion of the raw water bypasses the primary excess-lime reactor and is mixed with the high-pH effluent in a second stage. The natural C O 2 CO_2 C O 2 ​ and H C O 3 − HCO_3^- H C O 3 − ​ in the bypassed raw water neutralize the excess lime, dramatically reducing chemical purchase costs and sludge volume.

Following precipitation, the water is supersaturated with C a C O 3 CaCO_3 C a C O 3 ​ and has a high pH. Recarbonation involves bubbling carbon dioxide gas ( C O 2 CO_2 C O 2 ​ ) into the softened water in two stages:

First-Stage Recarbonation: Lowers pH from > 11.0 >11.0 > 11.0 to ∼ 9.5 \sim 9.5 ∼ 9.5 , converting excess O H − OH^- O H − to C O 3 2 − CO_3^{2-} C O 3 2 − ​ and precipitating residual C a C O 3 CaCO_3 C a C O 3 ​ .

Second-Stage Recarbonation: Lowers pH further to ∼ 8.3 − 8.6 \sim 8.3 - 8.6 ∼ 8.3 − 8.6 , converting insoluble C O 3 2 − CO_3^{2-} C O 3 2 − ​ to soluble H C O 3 − HCO_3^- H C O 3 − ​ , stabilizing the water against scaling prior to distribution.

Synthetic Ion Exchange Softening

Ion exchange replaces hardness ions with non-hardness cations (typically N a + Na^+ N a + ) using a synthetic cation exchange resin bed (e.g., sulfonated polystyrene divinylbenzene copolymer).

Exchange Mechanics & Regeneration Resin-2Na + + C a 2 + ⇌ Resin-Ca 2 + + 2 N a + \text{Resin-2Na}^+ + Ca^{2+} \rightleftharpoons \text{Resin-Ca}^{2+} + 2Na^+ Resin-2Na + + C a 2 + ⇌ Resin-Ca 2 + + 2 N a +

As hard water flows through the vessel, the resin selectivity favors C a 2 + Ca^{2+} C a 2 + and M g 2 + Mg^{2+} M g 2 + over N a + Na^+ N a + . Operating parameters include:

Exchange Capacity: Expressed in kilograins of C a C O 3 CaCO_3 C a C O 3 ​ per cubic foot of resin ( k g r / f t 3 kgr/ft^3 k g r / f t 3 , where 1 k g r = 1 , 000 grains 1 \ kgr = 1,000 \text{ grains} 1 k g r = 1 , 000 grains , and 1 lb = 7 , 000 grains 1 \text{ lb} = 7,000 \text{ grains} 1 lb = 7 , 000 grains ). Typical capacities range from 20 − 30 k g r / f t 3 20 - 30 \ kgr/ft^3 20 − 30 k g r / f t 3 .

Breakthrough Curve: Monitoring hardness in the effluent reveals an initial period of zero hardness followed by a rapid rise (breakthrough). When effluent hardness exceeds the operational limit, the bed is removed from service.

Regeneration Cycle: The exhausted resin is backwashed, regenerated with a concentrated saturated brine solution ( 10 − 15 % N a C l 10 - 15\% \ NaCl 10 − 15% N a Cl ), and rinsed. Mass action drives N a + Na^+ N a + back onto the resin, releasing C a 2 + Ca^{2+} C a 2 + and M g 2 + Mg^{2+} M g 2 + into a concentrated brine waste stream.

Pressure-Driven Membrane Filtration Systems

Membranes act as selective semi-permeable physical barriers for solid-liquid and solute-liquid separation.

Membrane Spectrum & Classifications

Process Pore Size Range Operating Pressure Range Target Contaminants Removed

Microfiltration (MF) 0.1 − 3.0 μ m 0.1 - 3.0 \ \mu m 0.1 − 3.0 μ m 3 − 30 p s i 3 - 30 \ psi 3 − 30 p s i ( 0.2 − 2 b a r 0.2 - 2 \ bar 0.2 − 2 ba r ) Suspended solids, turbidity, algae, protozoan cysts ( Giardia , Crypto ), bacteria

Ultrafiltration (UF) 0.01 − 0.1 μ m 0.01 - 0.1 \ \mu m 0.01 − 0.1 μ m 10 − 100 p s i 10 - 100 \ psi 10 − 100 p s i ( 0.7 − 7 b a r 0.7 - 7 \ bar 0.7 − 7 ba r ) Macromolecules, proteins, colloidal silica, all viruses

Nanofiltration (NF) 0.001 − 0.01 μ m 0.001 - 0.01 \ \mu m 0.001 − 0.01 μ m 50 − 200 p s i 50 - 200 \ psi 50 − 200 p s i ( 3.5 − 14 b a r 3.5 - 14 \ bar 3.5 − 14 ba r ) Softening membrane; multivalent ions ( C a 2 + , M g 2 + , S O 4 2 − Ca^{2+}, Mg^{2+}, SO_4^{2-} C a 2 + , M g 2 + , S O 4 2 − ​ ), natural organic matter (NOM)

Reverse Osmosis (RO) < 0.001 μ m < 0.001 \ \mu m < 0.001 μ m (dense polymer) 200 − 1200 p s i 200 - 1200 \ psi 200 − 1200 p s i ( 14 − 83 b a r 14 - 83 \ bar 14 − 83 ba r ) Monovalent ions ( N a + , C l − Na^+, Cl^- N a + , C l − ), dissolved salts, trace micropollutants, PFAS

Governing Flux and Osmotic Equations

Water flux ( J w J_w J w ​ , in L / m 2 ⋅ h L/m^2\cdot h L / m 2 ⋅ h or g f d gfd g fd ) across a reverse osmosis or nanofiltration membrane is governed by the net driving pressure: J w = A ( Δ P − Δ π ) J_w = A (\Delta P - \Delta \pi) J w ​ = A ( Δ P − Δ π )

Where:

A A A = Water permeability coefficient of the membrane ( L / m 2 ⋅ h ⋅ b a r L/m^2\cdot h \cdot bar L / m 2 ⋅ h ⋅ ba r )

Δ P \Delta P Δ P = Transmembrane pressure gradient ( P f e e d − P p e r m e a t e − Δ P f r i c t i o n 2 P_{feed} - P_{permeate} - \frac{\Delta P_{friction}}{2} P f ee d ​ − P p er m e a t e ​ − 2 Δ P f r i c t i o n ​ ​ )

Δ π \Delta \pi Δ π = Osmotic pressure differential across the active layer ( π f e e d / b o u n d a r y − π p e r m e a t e \pi_{feed/boundary} - \pi_{permeate} π f ee d / b o u n d a ry ​ − π p er m e a t e ​ )

Osmotic pressure ( π \pi π ) is estimated using the Van 't Hoff equation for dilute solutions: π = i M R T \pi = i M R T π = i MRT

Where i i i is the van 't Hoff factor (number of ions per molecule, e.g., i = 2 i=2 i = 2 for N a C l NaCl N a Cl ), M M M is molar concentration ( m o l / L mol/L m o l / L ), R R R is the ideal gas constant ( 0.0821 L ⋅ a t m / m o l ⋅ K 0.0821 \ L\cdot atm/mol\cdot K 0.0821 L ⋅ a t m / m o l ⋅ K ), and T T T is absolute temperature ( K K K ).

Solute flux ( J s J_s J s ​ ) across the membrane is driven by concentration gradient: J s = B ( C m − C p ) J_s = B (C_m - C_p) J s ​ = B ( C m ​ − C p ​ )

Where B B B is the solute permeability coefficient and C m C_m C m ​ is the solute concentration at the membrane surface.

Operational Metrics & Fouling Management

Recovery Rate ( R R R ): Percentage of raw feedwater converted into purified permeate product: R = Q p Q f × 100 % R = \frac{Q_p}{Q_f} \times 100\% R = Q f ​ Q p ​ ​ × 100%

Solute Rejection ( R r e j R_{rej} R re j ​ ): Efficiency of solute retention: R r e j = ( 1 − C p C f ) × 100 % R_{rej} = \left(1 - \frac{C_p}{C_f}\right) \times 100\% R re j ​ = ( 1 − C f ​ C p ​ ​ ) × 100%

Concentration Polarization (CP): Solutes rejected by the membrane accumulate at the boundary layer, elevating local concentration ( C m > C b C_m > C_b C m ​ > C b ​ ). The concentration polarization factor is modeled as C P = C m − C p C b − C p = exp ⁡ ( J w k ) CP = \frac{C_m - C_p}{C_b - C_p} = \exp\left(\frac{J_w}{k}\right) CP = C b ​ − C p ​ C m ​ − C p ​ ​ = exp ( k J w ​ ​ ) , where k k k is the boundary layer mass transfer coefficient. Elevated C P CP CP increases osmotic pressure and accelerates membrane scaling.

Fouling Control & CIP: Pretreatment (cartridge filters, antiscalant dosing, acid addition) minimizes mineral scaling ( C a S O 4 , C a C O 3 CaSO_4, CaCO_3 C a S O 4 ​ , C a C O 3 ​ ) and biofouling. Periodic Clean-In-Place (CIP) operations utilize low-pH citric acid flushes (to dissolve mineral scale) and high-pH caustic flushes with surfactants (to strip organic and biological foulants).