Study guide

2.5 Consolidation & Compressibility Analysis

PE Civil Geotechnical Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Site Characterization

1.1 Site Data Interpretation & Boring Plans 1.2 In Situ Testing & Field Exploration 1.3 Soil and Rock Classification Systems 1.4 Groundwater Characterization & Hydrogeology

2 Chapter 2: Soil Mechanics, Laboratory Testing, and Analysis

2.1 Weight-Volume Phase Relationships & Index Properties 2.2 Effective Stress & Pore Water Pressure Dynamics 2.3 Shear Strength Principles & Laboratory Testing 2.4 Permeability, Hydraulic Conductivity & Seepage Properties 2.5 Consolidation & Compressibility Analysis

3 Chapter 3: Construction Observation, Monitoring, QA/QC, and Safety

3.1 Earthwork Quality Control & Compaction Verification 3.2 Geotechnical Instrumentation & Field Monitoring 3.3 Trenching, Excavation Safety & OSHA Shoring Requirements 3.4 Erosion, Scour Protection & Slope Protection During Construction

4 Chapter 4: Earthquake Engineering and Dynamic Loads

4.1 Seismic Site Characterization & Ground Motion Hazards 4.2 Soil Liquefaction Triggering & Post-Liquefaction Assessment 4.3 Dynamic Soil Properties & Ground Response Analysis 4.4 Pseudostatic Analysis & Seismic Geotechnical Design

5 Chapter 5: Earth Structures, Ground Improvement, and Pavement

5.1 Slope Stability Analysis & Limit Equilibrium Methods 5.2 Embankments, Earth Dams & Levee Geotechnics 5.3 Ground Improvement Techniques & Design 5.4 Geosynthetics in Geotechnical Engineering 5.5 Flexible & Rigid Pavement Subgrades & Buried Utilities 5.6 Landfills, Caps & Containment Systems

6 Chapter 6: Groundwater and Seepage

6.1 Dewatering System Design & Well Drawdown 6.2 Flow Nets & Two-Dimensional Seepage Analysis 6.3 Uplift Pressure, Piping & Heave Safety 6.4 Subsurface Drainage Systems & Filter Criteria

7 Chapter 7: Problematic Soil and Rock Conditions

7.1 Expansive & Collapsible Soil Engineering 7.2 Organic Soils, Sensitive Clays & Soft Marine Deposits 7.3 Corrosive, Frost-Susceptible & Degradable Formations 7.4 Karst Topography, Rock Slopes & Rockfall Hazards

8 Chapter 8: Retaining Structures

8.1 Lateral Earth Pressure Theories 8.2 Rigid Retaining Wall Design 8.3 Flexible Retaining Walls & Sheet Pile Bulkheads 8.4 Temporary Support of Excavations 8.5 Mechanically Stabilized Earth (MSE) Walls & Soil Nail Structures 8.6 Cofferdams, Underpinning & Adjacent Infrastructure Effects

9 Chapter 9: Shallow Foundations

9.1 Ultimate & Allowable Bearing Capacity Theories 9.2 Effective Footing Area, Eccentricity & Combined Footings 9.3 Induced Stress Distribution & Immediate Elastic Settlement 9.4 Consolidation Settlement & Mat/Raft Foundation Design

10 Chapter 10: Deep Foundations

10.1 Driven Pile Axial Capacity & Settlement 10.2 Drilled Shaft Axial Design & Construction Methods 10.3 Lateral Load Behavior of Deep Foundations 10.4 Pile Group Dynamics, Efficiency & Downdrag 10.5 Dynamic Load Testing & Pile Integrity Evaluation

2.5 Consolidation & Compressibility Analysis

Key Takeaways Explain This Topic AI

Terzaghi's 1D consolidation theory dictates time-dependent excess pore pressure dissipation and effective stress transfer in fine-grained saturated soils.

Preconsolidation stress (σ'p) defines stress history; soils are normally consolidated when OCR = 1 (governed by Cc) or overconsolidated when OCR > 1 (governed by Cr and Cc).

Primary consolidation settlement calculations must evaluate whether stress increments cross the preconsolidation stress boundary (Case 1 vs Case 2 overconsolidation).

Consolidation rate is controlled by dimensionless time factor Tv = Cv · t / Hdr², where Hdr reflects single vs double drainage paths.

Secondary compression settlement occurs at constant effective stress under logarithmic creep (S_s = [Cα / (1 + ep)] · H · log10(t2 / t1)) following primary consolidation completion.

Last updated: July 2026

  • 2.5 Consolidation & Compressibility Analysis
  • 1. Fundamentals of Soil Consolidation

When a saturated cohesive soil layer is subjected to a load increment ( Δ σ \Delta\sigma Δ σ ), the incompressible pore water initially bears the entire stress increase as excess pore water pressure ( u e = Δ σ u_e = \Delta\sigma u e ​ = Δ σ ) due to low permeability. Over time, as pore water drains out, u e u_e u e ​ dissipates and stress transfers to the mineral soil matrix, increasing effective stress ( Δ σ ′ \Delta\sigma' Δ σ ′ ) and producing volumetric compression.

Total Settlement Components: S t o t a l = S i + S c + S s S_{total} = S_i + S_c + S_s S t o t a l ​ = S i ​ + S c ​ + S s ​

Where:

S i S_i S i ​ : Immediate (Elastic) Settlement: Occurs rapidly without volume change (constant w w w ).

S c S_c S c ​ : Primary Consolidation Settlement: Time-dependent volume change due to drainage of pore water under excess pore pressure gradients.

S s S_s S s ​ : Secondary Compression (Creep) Settlement: Time-dependent volume change occurring at constant effective stress after complete u e u_e u e ​ dissipation.

2. One-Dimensional Oedometer Test & Stress History

The compressibility parameters of fine-grained soils are determined using a 1D Oedometer (Consolidation) Test . Incremental vertical loads are applied to a laterally constrained cylindrical soil specimen, and equilibrium deformation is recorded at each step.

Plotting the e − log ⁡ σ ′ e - \log\sigma' e − lo g σ ′ Compression Curve

Plotting void ratio e e e against the logarithm of vertical effective stress log ⁡ 10 σ v ′ \log_{10}\sigma'_v lo g 10 ​ σ v ′ ​ reveals the soil's stress history:

Preconsolidation Stress ( σ p ′ \sigma'_p σ p ′ ​ ): The maximum historical effective vertical stress the soil has ever experienced. Determined graphically using Casagrande’s Method (finding point of maximum curvature, drawing horizontal line, tangent line, bisector, and intersecting with virgin line projection).

Overconsolidation Ratio ( O C R OCR OCR ): O C R = σ p ′ σ v 0 ′ OCR = \frac{\sigma'_p}{\sigma'_{v0}} OCR = σ v 0 ′ ​ σ p ′ ​ ​

Normally Consolidated (NC) Soil ( O C R = 1.0 OCR = 1.0 OCR = 1.0 ): In-situ effective stress σ v 0 ′ \sigma'_{v0} σ v 0 ′ ​ is the maximum historical stress ( σ v 0 ′ = σ p ′ \sigma'_{v0} = \sigma'_p σ v 0 ′ ​ = σ p ′ ​ ).

Overconsolidated (OC) Soil ( O C R > 1.0 OCR > 1.0 OCR > 1.0 ): Past stress exceeds current effective stress ( σ p ′ > σ v 0 ′ \sigma'_p > \sigma'_{v0} σ p ′ ​ > σ v 0 ′ ​ ). Caused by desiccation, glacial loading, eroded overburden, or groundwater table drops.

Underconsolidated Soil ( O C R < 1.0 OCR < 1.0 OCR < 1.0 ): Soil is currently consolidating under existing overburden (e.g., recent hydraulic fills).

Key Compressibility Indices:

Compression Index ( C c C_c C c ​ ): Slope of virgin consolidation curve: C c = e 1 − e 2 log ⁡ 10 ( σ 2 ′ / σ 1 ′ ) C_c = \frac{e_1 - e_2}{\log_{10}(\sigma'_2 / \sigma'_1)} C c ​ = lo g 10 ​ ( σ 2 ′ ​ / σ 1 ′ ​ ) e 1 ​ − e 2 ​ ​ Empirical estimation for remolded/undisturbed clays (Terzaghi & Peck): C c ≈ 0.009 ( L L − 10 ) C_c \approx 0.009 (LL - 10) C c ​ ≈ 0.009 ( LL − 10 )

Recompression (Swell) Index ( C r C_r C r ​ or C s C_s C s ​ ): Slope of recompression/rebound curve: C r ≈ 1 5 to 1 10 C c C_r \approx \frac{1}{5} \text{ to } \frac{1}{10} C_c C r ​ ≈ 5 1 ​ to 10 1 ​ C c ​

  • 3. Primary Consolidation Settlement Formulations
  • Case 1: Normally Consolidated Clays ( σ v 0 ′ = σ p ′ \sigma'_{v0} = \sigma'_p σ v 0 ′ ​ = σ p ′ ​ )

The entire stress increment ( Δ σ ′ \Delta\sigma' Δ σ ′ ) acts along the steep virgin compression curve ( C c C_c C c ​ ): S c = C c ⋅ H 0 1 + e 0 log ⁡ 10 ( σ v 0 ′ + Δ σ ′ σ v 0 ′ ) S_c = \frac{C_c \cdot H_0}{1 + e_0} \log_{10}\left( \frac{\sigma'_{v0} + \Delta\sigma'}{\sigma'_{v0}} \right) S c ​ = 1 + e 0 ​ C c ​ ⋅ H 0 ​ ​ lo g 10 ​ ( σ v 0 ′ ​ σ v 0 ′ ​ + Δ σ ′ ​ )

Case 2: Overconsolidated Clays ( σ v 0 ′ < σ p ′ \sigma'_{v0} < \sigma'_p σ v 0 ′ ​ < σ p ′ ​ )

Subcase A: Final stress remains below preconsolidation stress ( σ v 0 ′ + Δ σ ′ ≤ σ p ′ \sigma'_{v0} + \Delta\sigma' \le \sigma'_p σ v 0 ′ ​ + Δ σ ′ ≤ σ p ′ ​ )

Deformation stays entirely on the flatter recompression curve ( C r C_r C r ​ ): S c = C r ⋅ H 0 1 + e 0 log ⁡ 10 ( σ v 0 ′ + Δ σ ′ σ v 0 ′ ) S_c = \frac{C_r \cdot H_0}{1 + e_0} \log_{10}\left( \frac{\sigma'_{v0} + \Delta\sigma'}{\sigma'_{v0}} \right) S c ​ = 1 + e 0 ​ C r ​ ⋅ H 0 ​ ​ lo g 10 ​ ( σ v 0 ′ ​ σ v 0 ′ ​ + Δ σ ′ ​ )

Subcase B: Final stress exceeds preconsolidation stress ( σ v 0 ′ + Δ σ ′ > σ p ′ \sigma'_{v0} + \Delta\sigma' > \sigma'_p σ v 0 ′ ​ + Δ σ ′ > σ p ′ ​ )

Deformation re-compresses along C r C_r C r ​ up to σ p ′ \sigma'_p σ p ′ ​ , then transitions to virgin compression along C c C_c C c ​ : S c = C r ⋅ H 0 1 + e 0 log ⁡ 10 ( σ p ′ σ v 0 ′ ) + C c ⋅ H 0 1 + e 0 log ⁡ 10 ( σ v 0 ′ + Δ σ ′ σ p ′ ) S_c = \frac{C_r \cdot H_0}{1 + e_0} \log_{10}\left( \frac{\sigma'_p}{\sigma'_{v0}} \right) + \frac{C_c \cdot H_0}{1 + e_0} \log_{10}\left( \frac{\sigma'_{v0} + \Delta\sigma'}{\sigma'_p} \right) S c ​ = 1 + e 0 ​ C r ​ ⋅ H 0 ​ ​ lo g 10 ​ ( σ v 0 ′ ​ σ p ′ ​ ​ ) + 1 + e 0 ​ C c ​ ⋅ H 0 ​ ​ lo g 10 ​ ( σ p ′ ​ σ v 0 ′ ​ + Δ σ ′ ​ )

Coefficient of Volume Compressibility Method ( m v m_v m v ​ )

Alternatively, using m v = a v 1 + e 0 = Δ e Δ σ ′ ( 1 + e 0 ) m_v = \frac{a_v}{1 + e_0} = \frac{\Delta e}{\Delta\sigma' (1 + e_0)} m v ​ = 1 + e 0 ​ a v ​ ​ = Δ σ ′ ( 1 + e 0 ​ ) Δ e ​ : S c = m v ⋅ H 0 ⋅ Δ σ ′ S_c = m_v \cdot H_0 \cdot \Delta\sigma' S c ​ = m v ​ ⋅ H 0 ​ ⋅ Δ σ ′

4. Time Rate of 1D Consolidation (Terzaghi Differential Equation)

Terzaghi derived the partial differential equation governing 1D excess pore pressure dissipation: C v ∂ 2 u e ∂ z 2 = ∂ u e ∂ t C_v \frac{\partial^2 u_e}{\partial z^2} = \frac{\partial u_e}{\partial t} C v ​ ∂ z 2 ∂ 2 u e ​ ​ = ∂ t ∂ u e ​ ​

Where the Coefficient of Consolidation ( C v C_v C v ​ ) is: C v = k m v ⋅ γ w = k ( 1 + e 0 ) a v ⋅ γ w C_v = \frac{k}{m_v \cdot \gamma_w} = \frac{k (1 + e_0)}{a_v \cdot \gamma_w} C v ​ = m v ​ ⋅ γ w ​ k ​ = a v ​ ⋅ γ w ​ k ( 1 + e 0 ​ ) ​

Dimensionless Time Factor ( T v T_v T v ​ )

The relationship between time t t t , drainage distance H d r H_{dr} H d r ​ , and consolidation progress is given by: T v = C v ⋅ t H d r 2 ⟹ t = T v ⋅ H d r 2 C v T_v = \frac{C_v \cdot t}{H_{dr}^2} \implies t = \frac{T_v \cdot H_{dr}^2}{C_v} T v ​ = H d r 2 ​ C v ​ ⋅ t ​ ⟹ t = C v ​ T v ​ ⋅ H d r 2 ​ ​

Drainage Path Length ( H d r H_{dr} H d r ​ ):

Double Drainage: Permeable strata (sand/gravel) above AND below the clay layer ⟹ H d r = H c l a y 2 \implies H_{dr} = \frac{H_{clay}}{2} ⟹ H d r ​ = 2 H c l a y ​ ​ .

Single Drainage: Permeable stratum on ONE side, impermeable boundary (bedrock/geomembrane) on the other ⟹ H d r = H c l a y \implies H_{dr} = H_{clay} ⟹ H d r ​ = H c l a y ​ .

Average Degree of Consolidation ( U % U\% U % ) and T v T_v T v ​ Relations:

For U < 60 % U < 60\% U < 60% : T v = π 4 ( U % 100 ) 2 ≈ 0.785 ( U % 100 ) 2 T_v = \frac{\pi}{4} \left( \frac{U\%}{100} \right)^2 \approx 0.785 \left( \frac{U\%}{100} \right)^2 T v ​ = 4 π ​ ( 100 U % ​ ) 2 ≈ 0.785 ( 100 U % ​ ) 2

For U > 60 % U > 60\% U > 60% : T v = 1.781 − 0.933 log ⁡ 10 ( 100 − U % ) T_v = 1.781 - 0.933 \log_{10}(100 - U\%) T v ​ = 1.781 − 0.933 lo g 10 ​ ( 100 − U % )

  • Average Degree of Consolidation ( U % U\% U % ) Time Factor ( T v T_v T v ​ )
  • 20 % 20\% 20% 0.031 0.031 0.031
  • 50 % 50\% 50% 0.197 0.197 0.197
  • 70 % 70\% 70% 0.403 0.403 0.403
  • 90 % 90\% 90% 0.848 0.848 0.848
  • 95 % 95\% 95% 1.129 1.129 1.129
  • 5. Secondary Compression Settlement (Creep)

Secondary compression occurs after primary excess pore water pressure has fully dissipated ( U = 100 % U = 100\% U = 100% ), driven by plastic adjustment of clay micro-structure under constant effective stress. S s = C α 1 + e p H 0 log ⁡ 10 ( t 2 t 1 ) = C α ϵ ⋅ H 0 log ⁡ 10 ( t 2 t 1 ) S_s = \frac{C\alpha}{1 + e_p} H_0 \log_{10}\left( \frac{t_2}{t_1} \right) = C_{\alpha\epsilon} \cdot H_0 \log_{10}\left( \frac{t_2}{t_1} \right) S s ​ = 1 + e p ​ C α ​ H 0 ​ lo g 10 ​ ( t 1 ​ t 2 ​ ​ ) = C α ϵ ​ ⋅ H 0 ​ lo g 10 ​ ( t 1 ​ t 2 ​ ​ )

Where:

C α = Δ e log ⁡ 10 ( t 2 / t 1 ) C_\alpha = \frac{\Delta e}{\log_{10}(t_2 / t_1)} C α ​ = l o g 10 ​ ( t 2 ​ / t 1 ​ ) Δ e ​ : Secondary compression index.

e p e_p e p ​ : Void ratio at the end of primary consolidation.

t 1 t_1 t 1 ​ : Time to end of primary consolidation ( U = 95 − 100 % U = 95 - 100\% U = 95 − 100% ).

t 2 t_2 t 2 ​ : Target design lifetime (e.g., 30 or 50 years).

6. Comprehensive Worked Example

Problem Description: A 4.0 m thick saturated clay layer is buried between two permeable sand layers (Double drainage condition). The properties of the clay are:

  • Initial void ratio: e 0 = 0.90 e_0 = 0.90 e 0 ​ = 0.90
  • Compression Index: C c = 0.36 C_c = 0.36 C c ​ = 0.36
  • Recompression Index: C r = 0.06 C_r = 0.06 C r ​ = 0.06
  • Coefficient of consolidation: C v = 3.2 m 2 / year C_v = 3.2 \text{ m}^2/\text{year} C v ​ = 3.2 m 2 / year

Initial effective vertical overburden stress at layer mid-height: σ v 0 ′ = 80 kPa \sigma'_{v0} = 80 \text{ kPa} σ v 0 ′ ​ = 80 kPa

Preconsolidation stress: σ p ′ = 120 kPa \sigma'_p = 120 \text{ kPa} σ p ′ ​ = 120 kPa ( O C R = 1.50 OCR = 1.50 OCR = 1.50 )

A wide embankment surcharge increases vertical stress at mid-height by Δ σ ′ = 100 kPa \Delta\sigma' = 100 \text{ kPa} Δ σ ′ = 100 kPa .

Calculate:

Preconsolidation status and total primary consolidation settlement ( S c S_c S c ​ ).

Time required in days to achieve 50% primary consolidation ( U = 50 % , T v = 0.197 U = 50\%, T_v = 0.197 U = 50% , T v ​ = 0.197 ).

Time required in years to achieve 90% primary consolidation ( U = 90 % , T v = 0.848 U = 90\%, T_v = 0.848 U = 90% , T v ​ = 0.848 ).

Detailed Solution:

Calculate Primary Consolidation Settlement ( S c S_c S c ​ ):

Check stress range: σ v 0 ′ = 80 kPa \sigma'_{v0} = 80 \text{ kPa} σ v 0 ′ ​ = 80 kPa σ p ′ = 120 kPa \sigma'_p = 120 \text{ kPa} σ p ′ ​ = 120 kPa σ f ′ = σ v 0 ′ + Δ σ ′ = 80 + 100 = 180 kPa \sigma'_f = \sigma'_{v0} + \Delta\sigma' = 80 + 100 = 180 \text{ kPa} σ f ′ ​ = σ v 0 ′ ​ + Δ σ ′ = 80 + 100 = 180 kPa

Since σ f ′ ( 180 kPa ) > σ p ′ ( 120 kPa ) \sigma'_f (180 \text{ kPa}) > \sigma'_p (120 \text{ kPa}) σ f ′ ​ ( 180 kPa ) > σ p ′ ​ ( 120 kPa ) , this is an Overconsolidated Case 2 (Subcase B) calculation.

Apply the two-part formula: S c = C r ⋅ H 0 1 + e 0 log ⁡ 10 ( σ p ′ σ v 0 ′ ) + C c ⋅ H 0 1 + e 0 log ⁡ 10 ( σ f ′ σ p ′ ) S_c = \frac{C_r \cdot H_0}{1 + e_0} \log_{10}\left(\frac{\sigma'_p}{\sigma'_{v0}}\right) + \frac{C_c \cdot H_0}{1 + e_0} \log_{10}\left(\frac{\sigma'_f}{\sigma'_p}\right) S c ​ = 1 + e 0 ​ C r ​ ⋅ H 0 ​ ​ lo g 10 ​ ( σ v 0 ′ ​ σ p ′ ​ ​ ) + 1 + e 0 ​ C c ​ ⋅ H 0 ​ ​ lo g 10 ​ ( σ p ′ ​ σ f ′ ​ ​ ) S c 1 = 0.06 × 4.0 m 1 + 0.90 log ⁡ 10 ( 120 80 ) = 0.24 1.90 log ⁡ 10 ( 1.50 ) = 0.1263 × 0.1761 = 0.0222 m = 2.22 cm S_{c1} = \frac{0.06 \times 4.0 \text{ m}}{1 + 0.90} \log_{10}\left(\frac{120}{80}\right) = \frac{0.24}{1.90} \log_{10}(1.50) = 0.1263 \times 0.1761 = 0.0222 \text{ m} = 2.22 \text{ cm} S c 1 ​ = 1 + 0.90 0.06 × 4.0 m ​ lo g 10 ​ ( 80 120 ​ ) = 1.90 0.24 ​ lo g 10 ​ ( 1.50 ) = 0.1263 × 0.1761 = 0.0222 m = 2.22 cm S c 2 = 0.36 × 4.0 m 1 + 0.90 log ⁡ 10 ( 180 120 ) = 1.44 1.90 log ⁡ 10 ( 1.50 ) = 0.7579 × 0.1761 = 0.1335 m = 13.35 cm S_{c2} = \frac{0.36 \times 4.0 \text{ m}}{1 + 0.90} \log_{10}\left(\frac{180}{120}\right) = \frac{1.44}{1.90} \log_{10}(1.50) = 0.7579 \times 0.1761 = 0.1335 \text{ m} = 13.35 \text{ cm} S c 2 ​ = 1 + 0.90 0.36 × 4.0 m ​ lo g 10 ​ ( 120 180 ​ ) = 1.90 1.44 ​ lo g 10 ​ ( 1.50 ) = 0.7579 × 0.1761 = 0.1335 m = 13.35 cm S c = S c 1 + S c 2 = 2.22 cm + 13.35 cm = 15.57 cm ( 0.1557 m ) S_c = S_{c1} + S_{c2} = 2.22 \text{ cm} + 13.35 \text{ cm} = 15.57 \text{ cm} \quad (0.1557 \text{ m}) S c ​ = S c 1 ​ + S c 2 ​ = 2.22 cm + 13.35 cm = 15.57 cm ( 0.1557 m )

Calculate Time for 50% Consolidation ( t 50 t_{50} t 50 ​ ):

Double drainage ⟹ H d r = H c l a y 2 = 4.0 m 2 = 2.0 m \implies H_{dr} = \frac{H_{clay}}{2} = \frac{4.0 \text{ m}}{2} = 2.0 \text{ m} ⟹ H d r ​ = 2 H c l a y ​ ​ = 2 4.0 m ​ = 2.0 m .

Using t = T v ⋅ H d r 2 C v t = \frac{T_v \cdot H_{dr}^2}{C_v} t = C v ​ T v ​ ⋅ H d r 2 ​ ​ : t 50 = 0.197 × ( 2.0 m ) 2 3.2 m 2 / year = 0.197 × 4.0 3.2 = 0.788 3.2 = 0.24625 years t_{50} = \frac{0.197 \times (2.0 \text{ m})^2}{3.2 \text{ m}^2/\text{year}} = \frac{0.197 \times 4.0}{3.2} = \frac{0.788}{3.2} = 0.24625 \text{ years} t 50 ​ = 3.2 m 2 / year 0.197 × ( 2.0 m ) 2 ​ = 3.2 0.197 × 4.0 ​ = 3.2 0.788 ​ = 0.24625 years

Convert to days: t 50 = 0.24625 years × 365.25 days/year = 89.9 days ≈ 90 days t_{50} = 0.24625 \text{ years} \times 365.25 \text{ days/year} = 89.9 \text{ days} \approx 90 \text{ days} t 50 ​ = 0.24625 years × 365.25 days/year = 89.9 days ≈ 90 days

Calculate Time for 90% Consolidation ( t 90 t_{90} t 90 ​ ): t 90 = 0.848 × ( 2.0 m ) 2 3.2 m 2 / year = 0.848 × 4.0 3.2 = 3.392 3.2 = 1.06 years t_{90} = \frac{0.848 \times (2.0 \text{ m})^2}{3.2 \text{ m}^2/\text{year}} = \frac{0.848 \times 4.0}{3.2} = \frac{3.392}{3.2} = 1.06 \text{ years} t 90 ​ = 3.2 m 2 / year 0.848 × ( 2.0 m ) 2 ​ = 3.2 0.848 × 4.0 ​ = 3.2 3.392 ​ = 1.06 years

Loading diagram... e - log σ' Consolidation Curve and Preconsolidation Stress