Study guide

2.1 Weight-Volume Phase Relationships & Index Properties

PE Civil Geotechnical Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Site Characterization

1.1 Site Data Interpretation & Boring Plans 1.2 In Situ Testing & Field Exploration 1.3 Soil and Rock Classification Systems 1.4 Groundwater Characterization & Hydrogeology

2 Chapter 2: Soil Mechanics, Laboratory Testing, and Analysis

2.1 Weight-Volume Phase Relationships & Index Properties 2.2 Effective Stress & Pore Water Pressure Dynamics 2.3 Shear Strength Principles & Laboratory Testing 2.4 Permeability, Hydraulic Conductivity & Seepage Properties 2.5 Consolidation & Compressibility Analysis

3 Chapter 3: Construction Observation, Monitoring, QA/QC, and Safety

3.1 Earthwork Quality Control & Compaction Verification 3.2 Geotechnical Instrumentation & Field Monitoring 3.3 Trenching, Excavation Safety & OSHA Shoring Requirements 3.4 Erosion, Scour Protection & Slope Protection During Construction

4 Chapter 4: Earthquake Engineering and Dynamic Loads

4.1 Seismic Site Characterization & Ground Motion Hazards 4.2 Soil Liquefaction Triggering & Post-Liquefaction Assessment 4.3 Dynamic Soil Properties & Ground Response Analysis 4.4 Pseudostatic Analysis & Seismic Geotechnical Design

5 Chapter 5: Earth Structures, Ground Improvement, and Pavement

5.1 Slope Stability Analysis & Limit Equilibrium Methods 5.2 Embankments, Earth Dams & Levee Geotechnics 5.3 Ground Improvement Techniques & Design 5.4 Geosynthetics in Geotechnical Engineering 5.5 Flexible & Rigid Pavement Subgrades & Buried Utilities 5.6 Landfills, Caps & Containment Systems

6 Chapter 6: Groundwater and Seepage

6.1 Dewatering System Design & Well Drawdown 6.2 Flow Nets & Two-Dimensional Seepage Analysis 6.3 Uplift Pressure, Piping & Heave Safety 6.4 Subsurface Drainage Systems & Filter Criteria

7 Chapter 7: Problematic Soil and Rock Conditions

7.1 Expansive & Collapsible Soil Engineering 7.2 Organic Soils, Sensitive Clays & Soft Marine Deposits 7.3 Corrosive, Frost-Susceptible & Degradable Formations 7.4 Karst Topography, Rock Slopes & Rockfall Hazards

8 Chapter 8: Retaining Structures

8.1 Lateral Earth Pressure Theories 8.2 Rigid Retaining Wall Design 8.3 Flexible Retaining Walls & Sheet Pile Bulkheads 8.4 Temporary Support of Excavations 8.5 Mechanically Stabilized Earth (MSE) Walls & Soil Nail Structures 8.6 Cofferdams, Underpinning & Adjacent Infrastructure Effects

9 Chapter 9: Shallow Foundations

9.1 Ultimate & Allowable Bearing Capacity Theories 9.2 Effective Footing Area, Eccentricity & Combined Footings 9.3 Induced Stress Distribution & Immediate Elastic Settlement 9.4 Consolidation Settlement & Mat/Raft Foundation Design

10 Chapter 10: Deep Foundations

10.1 Driven Pile Axial Capacity & Settlement 10.2 Drilled Shaft Axial Design & Construction Methods 10.3 Lateral Load Behavior of Deep Foundations 10.4 Pile Group Dynamics, Efficiency & Downdrag 10.5 Dynamic Load Testing & Pile Integrity Evaluation

2.1 Weight-Volume Phase Relationships & Index Properties

Key Takeaways Explain This Topic AI

Soil is a three-phase system comprising solid mineral grains, water, and air; phase relationships establish fundamental volumetric (e, n, S) and gravimetric (w, γ, γd, γsat, γ') definitions.

The foundational phase identity S · e = w · Gs couples saturation degree, void ratio, gravimetric water content, and specific gravity of soil solids.

Atterberg limits (LL, PL, SL) define consistency boundaries for fine-grained soils; Plasticity Index (PI = LL - PL) and Liquidity Index (LI = (w - PL)/PI) quantify soil state and stress history.

Relative density (Dr = (emax - e)/(emax - emin) × 100%) quantifies the degree of compaction for coarse-grained soils.

Non-HAZMAT chemical, electrical, and thermal soil properties—organic content, pH, sulfate/chloride, resistivity, and thermal resistivity—control corrosion protection and buried-utility design even when strength parameters look adequate.

Last updated: July 2026

  • 2.1 Weight-Volume Phase Relationships & Index Properties
  • 1. The Three-Phase Soil Model

Natural soil deposits are non-homogeneous, multi-phase systems composed of three distinct constituents:

Solid Phase ( V s , W s V_s, W_s V s ​ , W s ​ ): Mineral grains or organic matter forming the structural soil skeleton.

Liquid Phase ( V w , W w V_w, W_w V w ​ , W w ​ ): Pore water occupying a fraction or all of the void space.

Gas Phase ( V a , W a ≈ 0 V_a, W_a \approx 0 V a ​ , W a ​ ≈ 0 ): Air or soil vapor filling the remaining void space.

The total volume of a soil mass V V V and total weight W W W are defined as: V = V s + V v = V s + V w + V a V = V_s + V_v = V_s + V_w + V_a V = V s ​ + V v ​ = V s ​ + V w ​ + V a ​ W = W s + W w + W a = W s + W w ( since W a ≈ 0 ) W = W_s + W_w + W_a = W_s + W_w \quad (\text{since } W_a \approx 0) W = W s ​ + W w ​ + W a ​ = W s ​ + W w ​ ( since W a ​ ≈ 0 )

Where:

V v = V w + V a V_v = V_w + V_a V v ​ = V w ​ + V a ​ is the total volume of voids.

W s W_s W s ​ is the dry weight of solid grains.

W w W_w W w ​ is the weight of pore water.

The density of water is standardized as ρ w = 1.00 g/cm 3 = 1000 kg/m 3 \rho_w = 1.00 \text{ g/cm}^3 = 1000 \text{ kg/m}^3 ρ w ​ = 1.00 g/cm 3 = 1000 kg/m 3 , corresponding to a unit weight of γ w = 62.4 lb/ft 3 = 9.81 kN/m 3 \gamma_w = 62.4 \text{ lb/ft}^3 = 9.81 \text{ kN/m}^3 γ w ​ = 62.4 lb/ft 3 = 9.81 kN/m 3 .

  • 2. Volumetric Relationships
  • Void Ratio ( e e e )
  • The ratio of void volume to solid volume: ≠ = V v V s \ne = \frac{V_v}{V_s}  = = V s ​ V v ​ ​
  • Loose sands/soft clays: e > 0.8 e > 0.8 e > 0.8
  • Dense sands/stiff clays: e < 0.5 e < 0.5 e < 0.5
  • Porosity ( n n n )

The ratio of void volume to total volume, expressed as a fraction or percentage: n = V v V × 100 % n = \frac{V_v}{V} \times 100\% n = V V v ​ ​ × 100%

Interconversion between void ratio and porosity is derived directly from V = V s + V v V = V_s + V_v V = V s ​ + V v ​ : n = e 1 + e ⟺ e = n 1 − n n = \frac{e}{1 + e} \quad \Longleftrightarrow \quad e = \frac{n}{1 - n} n = 1 + e e ​ ⟺ e = 1 − n n ​

Degree of Saturation ( S S S )

The ratio of water volume to void volume: S = V w V v × 100 % S = \frac{V_w}{V_v} \times 100\% S = V v ​ V w ​ ​ × 100%

  • Dry soil: S = 0 % S = 0\% S = 0%
  • Saturated soil: S = 100 % S = 100\% S = 100% ( 1.0 1.0 1.0 )
  • Unsaturated/Moist soil: 0 % < S < 100 % 0\% < S < 100\% 0% < S < 100%
  • 3. Gravimetric Relationships & Specific Gravity
  • Moisture Content ( w w w )

The ratio of water weight to dry solid weight: w = W w W s × 100 % w = \frac{W_w}{W_s} \times 100\% w = W s ​ W w ​ ​ × 100%

Specific Gravity of Soil Solids ( G s G_s G s ​ )

The dimensionless ratio of the unit weight of solid grains ( γ s \gamma_s γ s ​ ) to the unit weight of water ( γ w \gamma_w γ w ​ ): G s = γ s γ w = W s V s γ w G_s = \frac{\gamma_s}{\gamma_w} = \frac{W_s}{V_s \gamma_w} G s ​ = γ w ​ γ s ​ ​ = V s ​ γ w ​ W s ​ ​

Typical values for common minerals:

  • Quartz sand: G s = 2.65 G_s = 2.65 G s ​ = 2.65
  • Clay minerals (illite, kaolinite): G s = 2.68 − 2.75 G_s = 2.68 - 2.75 G s ​ = 2.68 − 2.75
  • Organic soils: G s < 2.40 G_s < 2.40 G s ​ < 2.40
  • Heavy iron-bearing soils (hematite): G s > 3.00 G_s > 3.00 G s ​ > 3.00
  • 4. Fundamental Phase Identity: S ⋅ e = w ⋅ G s S \cdot e = w \cdot G_s S ⋅ e = w ⋅ G s ​

The identity connecting saturation, void ratio, moisture content, and specific gravity is fundamental to geotechnical analysis.

Derivation: S ⋅ e = ( V w V v ) ⋅ ( V v V s ) = V w V s S \cdot e = \left(\frac{V_w}{V_v}\right) \cdot \left(\frac{V_v}{V_s}\right) = \frac{V_w}{V_s} S ⋅ e = ( V v ​ V w ​ ​ ) ⋅ ( V s ​ V v ​ ​ ) = V s ​ V w ​ ​

From weight definitions: W w = V w γ w ⟹ V w = W w γ w W_w = V_w \gamma_w \implies V_w = \frac{W_w}{\gamma_w} W w ​ = V w ​ γ w ​ ⟹ V w ​ = γ w ​ W w ​ ​ W s = V s G s γ w ⟹ V s = W s G s γ w W_s = V_s G_s \gamma_w \implies V_s = \frac{W_s}{G_s \gamma_w} W s ​ = V s ​ G s ​ γ w ​ ⟹ V s ​ = G s ​ γ w ​ W s ​ ​

Substituting V w V_w V w ​ and V s V_s V s ​ : V w V s = W w / γ w W s / ( G s γ w ) = ( W w W s ) ⋅ G s = w ⋅ G s \frac{V_w}{V_s} = \frac{W_w / \gamma_w}{W_s / (G_s \gamma_w)} = \left(\frac{W_w}{W_s}\right) \cdot G_s = w \cdot G_s V s ​ V w ​ ​ = W s ​ / ( G s ​ γ w ​ ) W w ​ / γ w ​ ​ = ( W s ​ W w ​ ​ ) ⋅ G s ​ = w ⋅ G s ​

Thus: S ⋅ e = w ⋅ G s S \cdot e = w \cdot G_s S ⋅ e = w ⋅ G s ​

For fully saturated soil ( S = 1.0 S = 1.0 S = 1.0 ), e = w ⋅ G s e = w \cdot G_s e = w ⋅ G s ​ .

5. Unit Weight Definitions

Moist (Total) Unit Weight ( γ \gamma γ ) γ = W V = G s + S e 1 + e γ w = G s ( 1 + w ) 1 + e γ w = γ d ( 1 + w ) \gamma = \frac{W}{V} = \frac{G_s + S e}{1 + e} \gamma_w = \frac{G_s (1 + w)}{1 + e} \gamma_w = \gamma_d (1 + w) γ = V W ​ = 1 + e G s ​ + S e ​ γ w ​ = 1 + e G s ​ ( 1 + w ) ​ γ w ​ = γ d ​ ( 1 + w )

Dry Unit Weight ( γ d \gamma_d γ d ​ ) γ d = W s V = G s γ w 1 + e = γ 1 + w \gamma_d = \frac{W_s}{V} = \frac{G_s \gamma_w}{1 + e} = \frac{\gamma}{1 + w} γ d ​ = V W s ​ ​ = 1 + e G s ​ γ w ​ ​ = 1 + w γ ​

Saturated Unit Weight ( γ s a t \gamma_{sat} γ s a t ​ )

When S = 1.0 S = 1.0 S = 1.0 : γ s a t = G s + e 1 + e γ w \gamma_{sat} = \frac{G_s + e}{1 + e} \gamma_w γ s a t ​ = 1 + e G s ​ + e ​ γ w ​

Submerged (Buoyant) Unit Weight ( γ ′ \gamma' γ ′ )

The effective weight per unit total volume underwater: γ ′ = γ s a t − γ w = G s + e 1 + e γ w − γ w = G s − 1 1 + e γ w \gamma' = \gamma_{sat} - \gamma_w = \frac{G_s + e}{1 + e} \gamma_w - \gamma_w = \frac{G_s - 1}{1 + e} \gamma_w γ ′ = γ s a t ​ − γ w ​ = 1 + e G s ​ + e ​ γ w ​ − γ w ​ = 1 + e G s ​ − 1 ​ γ w ​

6. Fine-Grained Index Properties: Atterberg Limits

Atterberg limits quantify the moisture contents at which fine-grained soils transition between physical states:

Boundary / Index Notation Definition / Formula Engineering Significance

Liquid Limit L L LL LL Water content transitioning liquid to plastic state (Casagrande cup or fall cone test). Higher L L LL LL indicates greater compressibility and swell potential.

Plastic Limit P L PL P L Water content at which soil crumbles when rolled into a 3.2 mm (1/8 in) thread. Defines lower limit of plastic behavior.

Shrinkage Limit S L SL S L Water content below which further moisture loss produces no volume reduction. Used for expansive soil evaluation.

Plasticity Index P I PI P I P I = L L − P L PI = LL - PL P I = LL − P L Range of water content over which soil remains plastic.

Liquidity Index L I LI L I L I = w − P L P I LI = \frac{w - PL}{PI} L I = P I w − P L ​ Relative in-situ soil consistency and stress history indicator.

Activity A A A A = P I % < 2 μ m A = \frac{PI}{\% < 2\,\mu\text{m}} A = % < 2 μ m P I ​ Mineralogical sensitivity (Kaolinite ~0.4, Illite ~0.9, Montmorillonite >1.5).

Interpretation of Liquidity Index ( L I LI L I ):

L I < 0 LI < 0 L I < 0 : Dry, hard, brittle soil; highly overconsolidated.

0 ≤ L I ≤ 1 0 \le LI \le 1 0 ≤ L I ≤ 1 : Plastic behavior; normal to light overconsolidation.

L I > 1 LI > 1 L I > 1 : Water content exceeds liquid limit; sensitive or quick clay vulnerable to complete strength loss upon shearing.

  • 7. Coarse-Grained Index Properties
  • Relative Density ( D r D_r D r ​ )

Used to describe the compactness of cohesionless soils (sands and gravels): D r = e m a x − e e m a x − e m i n × 100 % D_r = \frac{e_{max} - e}{e_{max} - e_{min}} \times 100\% D r ​ = e ma x ​ − e min ​ e ma x ​ − e ​ × 100%

Alternatively expressed in terms of dry unit weight: D r = [ γ d − γ d , m i n γ d , m a x − γ d , m i n ] ⋅ γ d , m a x γ d × 100 % D_r = \left[\frac{\gamma_d - \gamma_{d,min}}{\gamma_{d,max} - \gamma_{d,min}}\right] \cdot \frac{\gamma_{d,max}}{\gamma_d} \times 100\% D r ​ = [ γ d , ma x ​ − γ d , min ​ γ d ​ − γ d , min ​ ​ ] ⋅ γ d ​ γ d , ma x ​ ​ × 100%

  • Relative Density ( D r % D_r\% D r ​ % ) Descriptive Classification Engineering Behavior
  • 0 − 15 % 0 - 15\% 0 − 15% Very Loose High liquefaction susceptibility, large settlement
  • 15 − 35 % 15 - 35\% 15 − 35% Loose Contractive behavior during shear
  • 35 − 65 % 35 - 65\% 35 − 65% Medium Dense Moderate shear strength, acceptable bearing capacity
  • 65 − 85 % 65 - 85\% 65 − 85% Dense Dilative shear response, high friction angle
  • 85 − 100 % 85 - 100\% 85 − 100% Very Dense Excellent bearing capacity, minimal settlement
  • Grain Size Distribution Parameters

From the sieve analysis particle size distribution curve:

D 10 D_{10} D 10 ​ (Effective size): Diameter corresponding to 10% passing.

D 30 D_{30} D 30 ​ : Diameter corresponding to 30% passing.

D 60 D_{60} D 60 ​ : Diameter corresponding to 60% passing.

Coefficient of Uniformity ( C u C_u C u ​ ): C u = D 60 D 10 C_u = \frac{D_{60}}{D_{10}} C u ​ = D 10 ​ D 60 ​ ​

Coefficient of Curvature ( C c C_c C c ​ ): C c = ( D 30 ) 2 D 10 ⋅ D 60 C_c = \frac{(D_{30})^2}{D_{10} \cdot D_{60}} C c ​ = D 10 ​ ⋅ D 60 ​ ( D 30 ​ ) 2 ​

USCS Grading Criteria:

Well-Graded Gravel (GW): C u ≥ 4 C_u \ge 4 C u ​ ≥ 4 and 1 ≤ C c ≤ 3 1 \le C_c \le 3 1 ≤ C c ​ ≤ 3 .

Well-Graded Sand (SW): C u ≥ 6 C_u \ge 6 C u ​ ≥ 6 and 1 ≤ C c ≤ 3 1 \le C_c \le 3 1 ≤ C c ​ ≤ 3 .

If criteria are not met, classified as Poorly-Graded (GP or SP).

8. Detailed Worked Example

Problem Statement: A moist soil sample retrieved from a bore pit has a total volume of 0.012 m 3 0.012 \text{ m}^3 0.012 m 3 and a total mass of 22.8 kg 22.8 \text{ kg} 22.8 kg . After oven-drying at 110 ∘ C 110^\circ\text{C} 11 0 ∘ C to constant mass, the dry mass is 19.5 kg 19.5 \text{ kg} 19.5 kg . Laboratory testing yields G s = 2.68 G_s = 2.68 G s ​ = 2.68 . Calculate:

  • Moisture content ( w w w )
  • Moist unit weight ( γ \gamma γ ) and dry unit weight ( γ d \gamma_d γ d ​ )
  • Void ratio ( e e e ) and porosity ( n n n )
  • Degree of saturation ( S S S )
  • Saturated unit weight ( γ s a t \gamma_{sat} γ s a t ​ ) and submerged unit weight ( γ ′ \gamma' γ ′ )

Solution Steps:

Calculate Moisture Content ( w w w ): W w = ( M − M s ) ⋅ g = ( 22.8 − 19.5 ) ⋅ 9.81 = 32.37 N W_w = (M - M_s) \cdot g = (22.8 - 19.5) \cdot 9.81 = 32.37 \text{ N} W w ​ = ( M − M s ​ ) ⋅ g = ( 22.8 − 19.5 ) ⋅ 9.81 = 32.37 N W s = 19.5 ⋅ 9.81 = 191.30 N W_s = 19.5 \cdot 9.81 = 191.30 \text{ N} W s ​ = 19.5 ⋅ 9.81 = 191.30 N w = M w M s = 22.8 − 19.5 19.5 = 3.3 19.5 = 0.1692 ⟹ 16.92 % w = \frac{M_w}{M_s} = \frac{22.8 - 19.5}{19.5} = \frac{3.3}{19.5} = 0.1692 \implies 16.92\% w = M s ​ M w ​ ​ = 19.5 22.8 − 19.5 ​ = 19.5 3.3 ​ = 0.1692 ⟹ 16.92%

Calculate Moist and Dry Unit Weights: γ = W V = 22.8 kg × 9.81 m/s 2 0.012 m 3 = 223.67 N 0.012 m 3 = 18 , 639 N/m 3 = 18.64 kN/m 3 \gamma = \frac{W}{V} = \frac{22.8 \text{ kg} \times 9.81 \text{ m/s}^2}{0.012 \text{ m}^3} = \frac{223.67 \text{ N}}{0.012 \text{ m}^3} = 18,639 \text{ N/m}^3 = 18.64 \text{ kN/m}^3 γ = V W ​ = 0.012 m 3 22.8 kg × 9.81 m/s 2 ​ = 0.012 m 3 223.67 N ​ = 18 , 639 N/m 3 = 18.64 kN/m 3 γ d = γ 1 + w = 18.64 1 + 0.1692 = 15.94 kN/m 3 \gamma_d = \frac{\gamma}{1 + w} = \frac{18.64}{1 + 0.1692} = 15.94 \text{ kN/m}^3 γ d ​ = 1 + w γ ​ = 1 + 0.1692 18.64 ​ = 15.94 kN/m 3

Calculate Void Ratio ( e e e ) and Porosity ( n n n ): Using γ d = G s γ w 1 + e \gamma_d = \frac{G_s \gamma_w}{1 + e} γ d ​ = 1 + e G s ​ γ w ​ ​ : 1 + e = G s γ w γ d = 2.68 × 9.81 15.94 = 26.29 15.94 = 1.649 1 + e = \frac{G_s \gamma_w}{\gamma_d} = \frac{2.68 \times 9.81}{15.94} = \frac{26.29}{15.94} = 1.649 1 + e = γ d ​ G s ​ γ w ​ ​ = 15.94 2.68 × 9.81 ​ = 15.94 26.29 ​ = 1.649 e = 1.649 − 1 = 0.649 e = 1.649 - 1 = 0.649 e = 1.649 − 1 = 0.649 n = e 1 + e = 0.649 1.649 = 0.3936 ⟹ 39.36 % n = \frac{e}{1 + e} = \frac{0.649}{1.649} = 0.3936 \implies 39.36\% n = 1 + e e ​ = 1.649 0.649 ​ = 0.3936 ⟹ 39.36%

Calculate Degree of Saturation ( S S S ): Using S ⋅ e = w ⋅ G s S \cdot e = w \cdot G_s S ⋅ e = w ⋅ G s ​ : S = w ⋅ G s e = 0.1692 × 2.68 0.649 = 0.4535 0.649 = 0.6987 ⟹ 69.87 % S = \frac{w \cdot G_s}{e} = \frac{0.1692 \times 2.68}{0.649} = \frac{0.4535}{0.649} = 0.6987 \implies 69.87\% S = e w ⋅ G s ​ ​ = 0.649 0.1692 × 2.68 ​ = 0.649 0.4535 ​ = 0.6987 ⟹ 69.87%

Calculate γ s a t \gamma_{sat} γ s a t ​ and γ ′ \gamma' γ ′ : γ s a t = G s + e 1 + e γ w = 2.68 + 0.649 1.649 × 9.81 = 3.329 1.649 × 9.81 = 19.81 kN/m 3 \gamma_{sat} = \frac{G_s + e}{1 + e} \gamma_w = \frac{2.68 + 0.649}{1.649} \times 9.81 = \frac{3.329}{1.649} \times 9.81 = 19.81 \text{ kN/m}^3 γ s a t ​ = 1 + e G s ​ + e ​ γ w ​ = 1.649 2.68 + 0.649 ​ × 9.81 = 1.649 3.329 ​ × 9.81 = 19.81 kN/m 3 γ ′ = γ s a t − γ w = 19.81 − 9.81 = 10.00 kN/m 3 \gamma' = \gamma_{sat} - \gamma_w = 19.81 - 9.81 = 10.00 \text{ kN/m}^3 γ ′ = γ s a t ​ − γ w ​ = 19.81 − 9.81 = 10.00 kN/m 3

Soil Chemical, Electrical, and Thermal Properties (Non-HAZMAT)

Beyond index and strength properties, several non-hazardous chemical, electrical, and thermal soil characteristics govern durability of buried infrastructure, concrete mix design, and utility performance. These properties are typically screened from disturbed bulk samples and do not require environmental (HAZMAT) sampling protocols.

Organic Content, pH, Sulfate, and Chloride

Organic content (ASTM D2974, loss-on-ignition) quantifies the percentage of organic matter by mass. Soils exceeding roughly 5 % 5\% 5% organic content show increased compressibility and reduced strength relative to inorganic soils of similar index properties; soils exceeding 20 20 20 – 75 % 75\% 75% (agency-dependent threshold) are classified as peat (Pt) under USCS. pH (ASTM G51) below 5.5 5.5 5.5 indicates acidic conditions that accelerate corrosion of buried ferrous metals and can aggressively attack certain concrete admixtures. Water-soluble sulfate content controls ACI 318 concrete exposure class (S0–S3) selection and cement type (Type II vs. Type V) for foundations in contact with soil. Chloride content independently drives reinforcing-steel corrosion risk and is tested alongside sulfate for "aggressive soil" classification on transportation and buried-structure projects.

Cation Exchange Capacity (CEC)

CEC measures a clay's capacity to hold and exchange cations on particle surfaces and is a strong proxy for clay mineralogy and expansive potential . High-CEC smectite/montmorillonite clays ( 80 80 80 – 150 meq / 100 g 150\text{ meq}/100\text{g} 150 meq /100 g ) are associated with high swell potential, while low-CEC kaolinite clays ( 3 3 3 – 15 meq / 100 g 15\text{ meq}/100\text{g} 15 meq /100 g ) are relatively inert. CEC results are cross-checked against Atterberg limits and activity ( A = P I / % clay A = PI/\%\text{clay} A = P I /% clay ) when screening for expansive-soil risk.

Electrical Resistivity and Corrosion Classification

Soil electrical resistivity, measured in the field by the Wenner four-pin method (ASTM G57), is the primary screening parameter for corrosivity of buried metallic infrastructure (steel pipe, ductile iron, corrugated metal culverts). Lower resistivity indicates a more electrically conductive, more corrosive soil environment.

  • Resistivity Range (ohm-cm) Typical Corrosivity Classification
  • > 20,000 > 20{,}000 > 20 , 000 Essentially noncorrosive
  • 10,000 – 20,000 10{,}000\text{–}20{,}000 10 , 000 – 20 , 000 Mildly corrosive
  • 5,000 – 10,000 5{,}000\text{–}10{,}000 5 , 000 – 10 , 000 Moderately corrosive
  • 3,000 – 5,000 3{,}000\text{–}5{,}000 3 , 000 – 5 , 000 Corrosive
  • 1,000 – 3,000 1{,}000\text{–}3{,}000 1 , 000 – 3 , 000 Highly corrosive
  • < 1,000 < 1{,}000 < 1 , 000 Severely corrosive

(Bands are representative; agency-specific tables such as AASHTO/state DOT criteria may shift thresholds slightly.)

Thermal Conductivity and Resistivity

Soil thermal properties govern buried electrical duct ampacity (heat dissipation from cables) and frost-depth prediction (via the modified Berggren equation). Thermal resistivity (the inverse of conductivity, in ∘ C ⋅ cm / W ^\circ\text{C}\cdot\text{cm}/\text{W} ∘ C ⋅ cm / W ) is lowest for saturated, dense, coarse-grained soils and highest for dry, low-density soils — moisture and density, not mineralogy alone, dominate the result.

  • Condition Approx. Thermal Resistivity ( ∘ C ⋅ cm / W ^\circ\text{C}\cdot\text{cm}/\text{W} ∘ C ⋅ cm / W )
  • Dry sand ≈ 120 \approx 120 ≈ 120
  • Moist clay ≈ 60 \approx 60 ≈ 60
  • Saturated sand/clay 40 – 60 40\text{–}60 40 – 60
  • Worked Example: Resistivity-Based Corrosivity Classification

A four-pin Wenner resistivity survey along a proposed steel water-transmission main alignment returns a native-moisture reading of ρ = 2,400 Ω -cm \rho = 2{,}400\ \Omega\text{-cm} ρ = 2 , 400 Ω -cm . Comparing against the classification table, this value falls in the 1,000 1{,}000 1 , 000 – 3,000 Ω -cm 3{,}000\ \Omega\text{-cm} 3 , 000 Ω -cm band, classifying the soil as Highly Corrosive . Per typical utility corrosion-control practice, this classification triggers a recommendation for cathodic protection (sacrificial anode or impressed current) and/or a dielectric polyethylene encasement on the buried steel main, rather than relying on standard mill-applied coatings alone.

Loading diagram... Three-Phase Soil Element Representation