Study guide

4.1 Seismic Site Characterization & Ground Motion Hazards

PE Civil Geotechnical Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Site Characterization

1.1 Site Data Interpretation & Boring Plans 1.2 In Situ Testing & Field Exploration 1.3 Soil and Rock Classification Systems 1.4 Groundwater Characterization & Hydrogeology

2 Chapter 2: Soil Mechanics, Laboratory Testing, and Analysis

2.1 Weight-Volume Phase Relationships & Index Properties 2.2 Effective Stress & Pore Water Pressure Dynamics 2.3 Shear Strength Principles & Laboratory Testing 2.4 Permeability, Hydraulic Conductivity & Seepage Properties 2.5 Consolidation & Compressibility Analysis

3 Chapter 3: Construction Observation, Monitoring, QA/QC, and Safety

3.1 Earthwork Quality Control & Compaction Verification 3.2 Geotechnical Instrumentation & Field Monitoring 3.3 Trenching, Excavation Safety & OSHA Shoring Requirements 3.4 Erosion, Scour Protection & Slope Protection During Construction

4 Chapter 4: Earthquake Engineering and Dynamic Loads

4.1 Seismic Site Characterization & Ground Motion Hazards 4.2 Soil Liquefaction Triggering & Post-Liquefaction Assessment 4.3 Dynamic Soil Properties & Ground Response Analysis 4.4 Pseudostatic Analysis & Seismic Geotechnical Design

5 Chapter 5: Earth Structures, Ground Improvement, and Pavement

5.1 Slope Stability Analysis & Limit Equilibrium Methods 5.2 Embankments, Earth Dams & Levee Geotechnics 5.3 Ground Improvement Techniques & Design 5.4 Geosynthetics in Geotechnical Engineering 5.5 Flexible & Rigid Pavement Subgrades & Buried Utilities 5.6 Landfills, Caps & Containment Systems

6 Chapter 6: Groundwater and Seepage

6.1 Dewatering System Design & Well Drawdown 6.2 Flow Nets & Two-Dimensional Seepage Analysis 6.3 Uplift Pressure, Piping & Heave Safety 6.4 Subsurface Drainage Systems & Filter Criteria

7 Chapter 7: Problematic Soil and Rock Conditions

7.1 Expansive & Collapsible Soil Engineering 7.2 Organic Soils, Sensitive Clays & Soft Marine Deposits 7.3 Corrosive, Frost-Susceptible & Degradable Formations 7.4 Karst Topography, Rock Slopes & Rockfall Hazards

8 Chapter 8: Retaining Structures

8.1 Lateral Earth Pressure Theories 8.2 Rigid Retaining Wall Design 8.3 Flexible Retaining Walls & Sheet Pile Bulkheads 8.4 Temporary Support of Excavations 8.5 Mechanically Stabilized Earth (MSE) Walls & Soil Nail Structures 8.6 Cofferdams, Underpinning & Adjacent Infrastructure Effects

9 Chapter 9: Shallow Foundations

9.1 Ultimate & Allowable Bearing Capacity Theories 9.2 Effective Footing Area, Eccentricity & Combined Footings 9.3 Induced Stress Distribution & Immediate Elastic Settlement 9.4 Consolidation Settlement & Mat/Raft Foundation Design

10 Chapter 10: Deep Foundations

10.1 Driven Pile Axial Capacity & Settlement 10.2 Drilled Shaft Axial Design & Construction Methods 10.3 Lateral Load Behavior of Deep Foundations 10.4 Pile Group Dynamics, Efficiency & Downdrag 10.5 Dynamic Load Testing & Pile Integrity Evaluation

4.1 Seismic Site Characterization & Ground Motion Hazards

Key Takeaways Explain This Topic AI

Seismic ground motions are quantified by peak parameters (PGA, PGV, PGD), spectral acceleration (Sa), and energy metrics such as Arias Intensity (Ia).

ASCE 7 and IBC categorize soil sites into Site Classes A through F based on the 30-meter average shear wave velocity (Vs30), standard penetration blow count (N60), or undrained shear strength (su).

Vs30 is evaluated as a travel-time weighted harmonic mean of shear wave velocities across the top 30 meters (100 feet) of the soil profile.

Design response spectra (SDS, SD1) are constructed by scaling risk-targeted maximum considered earthquake (MCE_R) spectral parameters (Ss, S1) with site amplification coefficients (Fa, Fv).

Probabilistic Seismic Hazard Analysis (PSHA) incorporates aleatory variability and epistemic uncertainty across magnitude, rupture location, and attenuation to yield hazard curves and deaggregation spectra.

Last updated: July 2026

  • 4.1 Seismic Site Characterization & Ground Motion Hazards
  • 1. Introduction & Wave Propagation Mechanics

Earthquake engineering in geotechnical practice begins with understanding how seismic waves originate from fault ruptures and propagate through the Earth's crust to reach engineering structures. Fault ruptures release stored strain energy in the form of seismic waves, broadly categorized into body waves and surface waves :

Body Waves (propagate through the interior of the earth):

Compressional or Primary Waves (P-waves): Longitudinal waves where particle motion is parallel to the direction of propagation. P-waves travel fastest through solid rock and soil, according to the velocity relation: V p = M ρ = K + 4 3 G ρ V_p = \sqrt{\frac{M}{\rho}} = \sqrt{\frac{K + \frac{4}{3}G}{\rho}} V p ​ = ρ M ​ ​ = ρ K + 3 4 ​ G ​ ​ where M M M is the constrained modulus, K K K is the bulk modulus, G G G is the shear modulus, and ρ \rho ρ is total mass density.

Shear or Secondary Waves (S-waves): Transverse waves where particle motion is perpendicular to the direction of wave propagation. S-waves cannot propagate through fluids ( G = 0 G = 0 G = 0 ) and are the primary driver of cyclic shear stresses in soil deposits during earthquake shaking. Shear wave velocity is expressed as: V s = G ρ V_s = \sqrt{\frac{G}{\rho}} V s ​ = ρ G ​ ​

Surface Waves (propagate along the earth's surface or boundary layer):

Rayleigh Waves (R-waves): Exhibit retrograde elliptical particle motion in a vertical plane aligned with propagation. Rayleigh waves decay slowly with depth and often dominate ground motion amplitude at long periods.

Love Waves (L-waves): Transverse horizontal motion confined to surface layers, requiring a velocity gradient (softer layer over stiffer substrate). Seismic Wave Taxonomy:

  • ├── Body Waves
  • │ ├── P-Waves (Compressional, parallel particle motion, fastest)
  • │ └── S-Waves (Shear, perpendicular particle motion, key for geotechnical shear stress)
  • └── Surface Waves
  • ├── Rayleigh Waves (Retrograde elliptical motion in vertical plane)
  • └── Love Waves (Transverse horizontal motion in surface layer)
  • 2. Ground Motion Intensity Measures

To quantify earthquake ground motions for geotechnical analysis and structural design, several intensity measures are utilized:

Peak Ground Acceleration ( P G A PGA PG A ): The maximum absolute amplitude of horizontal acceleration recorded on an accelerogram. It serves as the baseline parameter for simplified liquefaction and pseudostatic slope analyses.

Peak Ground Velocity ( P G V PGV PG V ): Reflects ground motion energy in the intermediate period range ( 0.5 s ≤ T ≤ 2.0 s 0.5\text{ s} \le T \le 2.0\text{ s} 0.5 s ≤ T ≤ 2.0 s ) and strongly correlates with structural drift and pipeline damage.

Peak Ground Displacement ( P G D PGD PG D ): Dominates long-period structural response and permanent ground deformation.

Spectral Acceleration ( S a S_a S a ​ ): The peak response acceleration of a single-degree-of-freedom (SDOF) system with a specified natural period T T T and critical damping ratio ζ \zeta ζ (typically 5%).

Arias Intensity ( I a I_a I a ​ ): A cumulative measure of total seismic energy density per unit mass, integrated over the duration of shaking: I a = π 2 g ∫ 0 t d [ a ( t ) ] 2 d t I_a = \frac{\pi}{2g} \int_{0}^{t_d} [a(t)]^2 dt I a ​ = 2 g π ​ ∫ 0 t d ​ ​ [ a ( t ) ] 2 d t where a ( t ) a(t) a ( t ) is ground acceleration and t d t_d t d ​ is total motion duration. I a I_a I a ​ strongly correlates with seismic slope displacement and liquefaction triggering potential.

3. ASCE 7 / IBC Site Classification Framework

Local soil conditions dramatically alter the amplitude, frequency content, and duration of bedrock ground motions. ASCE 7-16 and ASCE 7-22 classify sites into six primary categories (Site Classes A through F) based on average soil properties within the top 30 meters (100 feet) of the subsurface profile.

Site Class Soil Profile Name / Description Average Shear Wave Velocity ( V s 30 V_{s30} V s 30 ​ ) Standard Blow Count ( N ˉ 60 \bar{N}_{60} N ˉ 60 ​ ) Undrained Shear Strength ( s ˉ u \bar{s}_u s ˉ u ​ )

A Hard rock V s 30 > 1 , 500 m/s V_{s30} > 1,500\text{ m/s} V s 30 ​ > 1 , 500 m/s ( > 5 , 000 ft/s > 5,000\text{ ft/s} > 5 , 000 ft/s ) N/A N/A

B Medium rock 760 < V s 30 ≤ 1 , 500 m/s 760 < V_{s30} \le 1,500\text{ m/s} 760 < V s 30 ​ ≤ 1 , 500 m/s ( 2 , 500 − 5 , 000 ft/s 2,500 - 5,000\text{ ft/s} 2 , 500 − 5 , 000 ft/s ) N/A N/A

C Very dense soil and soft rock 360 < V s 30 ≤ 760 m/s 360 < V_{s30} \le 760\text{ m/s} 360 < V s 30 ​ ≤ 760 m/s ( 1 , 200 − 2 , 500 ft/s 1,200 - 2,500\text{ ft/s} 1 , 200 − 2 , 500 ft/s ) N ˉ 60 > 50 \bar{N}_{60} > 50 N ˉ 60 ​ > 50 s ˉ u ≥ 100 kPa \bar{s}_u \ge 100\text{ kPa} s ˉ u ​ ≥ 100 kPa ( > 2 , 000 psf > 2,000\text{ psf} > 2 , 000 psf )

D Stiff soil profile 180 ≤ V s 30 ≤ 360 m/s 180 \le V_{s30} \le 360\text{ m/s} 180 ≤ V s 30 ​ ≤ 360 m/s ( 600 − 1 , 200 ft/s 600 - 1,200\text{ ft/s} 600 − 1 , 200 ft/s ) 15 ≤ N ˉ 60 ≤ 50 15 \le \bar{N}_{60} \le 50 15 ≤ N ˉ 60 ​ ≤ 50 50 ≤ s ˉ u ≤ 100 kPa 50 \le \bar{s}_u \le 100\text{ kPa} 50 ≤ s ˉ u ​ ≤ 100 kPa ( 1 , 000 − 2 , 000 psf 1,000 - 2,000\text{ psf} 1 , 000 − 2 , 000 psf )

E Soft clay soil profile V s 30 < 180 m/s V_{s30} < 180\text{ m/s} V s 30 ​ < 180 m/s ( < 600 ft/s < 600\text{ ft/s} < 600 ft/s ) N ˉ 60 < 15 \bar{N}_{60} < 15 N ˉ 60 ​ < 15 s ˉ u < 50 kPa \bar{s}_u < 50\text{ kPa} s ˉ u ​ < 50 kPa ( < 1 , 000 psf < 1,000\text{ psf} < 1 , 000 psf )

F Soils requiring site-specific evaluation Peat, highly organic clays, quick clays, high plasticity ( P I > 75 PI > 75 P I > 75 ), thick soft clay ( H > 36 m H > 36\text{ m} H > 36 m ) N/A Special geotechnical investigation mandatory

4. Calculation of 30-Meter Average Shear Wave Velocity ( V s 30 V_{s30} V s 30 ​ )

V s 30 V_{s30} V s 30 ​ is defined as the time-weighted harmonic mean shear wave velocity across the top 30 meters of the site. It represents the total travel time of an S-wave propagating vertically through the upper 30 m: V s 30 = ∑ i = 1 n d i ∑ i = 1 n d i V s i = 30 m ∑ i = 1 n d i V s i V_{s30} = \frac{\sum_{i=1}^{n} d_i}{\sum_{i=1}^{n} \frac{d_i}{V_{si}}} = \frac{30\text{ m}}{\sum_{i=1}^{n} \frac{d_i}{V_{si}}} V s 30 ​ = ∑ i = 1 n ​ V s i ​ d i ​ ​ ∑ i = 1 n ​ d i ​ ​ = ∑ i = 1 n ​ V s i ​ d i ​ ​ 30 m ​

where:

d i d_i d i ​ = thickness of layer i i i (in meters), such that ∑ i = 1 n d i = 30 m \sum_{i=1}^{n} d_i = 30\text{ m} ∑ i = 1 n ​ d i ​ = 30 m .

V s i V_{si} V s i ​ = shear wave velocity of layer i i i (in m/s).

Similarly, average equivalent SPT blow count ( N ˉ 60 \bar{N}_{60} N ˉ 60 ​ ) for cohesionless layers is calculated as: N ˉ 60 = ∑ d i ∑ d i N 60 , i \bar{N}_{60} = \frac{\sum d_i}{\sum \frac{d_i}{N_{60,i}}} N ˉ 60 ​ = ∑ N 60 , i ​ d i ​ ​ ∑ d i ​ ​

5. Construction of Design Response Spectrum

Under ASCE 7 procedure, short-period ( S s S_s S s ​ at T = 0.2 s T = 0.2\text{ s} T = 0.2 s ) and 1-second period ( S 1 S_1 S 1 ​ at T = 1.0 s T = 1.0\text{ s} T = 1.0 s ) Risk-Targeted Maximum Considered Earthquake ( M C E R MCE_R MC E R ​ ) spectral accelerations mapped for bedrock (Site Class B/C boundary) are modified by site coefficients F a F_a F a ​ and F v F_v F v ​ to determine maximum site accelerations: S M S = F a S s S_{MS} = F_a S_s S MS ​ = F a ​ S s ​ S M 1 = F v S 1 S_{M1} = F_v S_1 S M 1 ​ = F v ​ S 1 ​

The Design Spectral Acceleration parameters ( S D S S_{DS} S D S ​ and S D 1 S_{D1} S D 1 ​ ) are taken as two-thirds of the M C E R MCE_R MC E R ​ values: S D S = 2 3 S M S = 2 3 F a S s S_{DS} = \frac{2}{3} S_{MS} = \frac{2}{3} F_a S_s S D S ​ = 3 2 ​ S MS ​ = 3 2 ​ F a ​ S s ​ S D 1 = 2 3 S M 1 = 2 3 F v S 1 S_{D1} = \frac{2}{3} S_{M1} = \frac{2}{3} F_v S_1 S D 1 ​ = 3 2 ​ S M 1 ​ = 3 2 ​ F v ​ S 1 ​

Key transition periods for building the design curve are defined as: T s = S D 1 S D S T_s = \frac{S_{D1}}{S_{DS}} T s ​ = S D S ​ S D 1 ​ ​ T 0 = 0.2 T s = 0.2 S D 1 S D S T_0 = 0.2 T_s = 0.2 \frac{S_{D1}}{S_{DS}} T 0 ​ = 0.2 T s ​ = 0.2 S D S ​ S D 1 ​ ​

The design spectral response acceleration S a ( T ) S_a(T) S a ​ ( T ) across period T T T is constructed in four period ranges:

For 0 ≤ T < T 0 0 \le T < T_0 0 ≤ T < T 0 ​ : S a = S D S ( 0.4 + 0.6 T T 0 ) S_a = S_{DS} \left(0.4 + 0.6 \frac{T}{T_0}\right) S a ​ = S D S ​ ( 0.4 + 0.6 T 0 ​ T ​ )

For T 0 ≤ T ≤ T s T_0 \le T \le T_s T 0 ​ ≤ T ≤ T s ​ : S a = S D S S_a = S_{DS} S a ​ = S D S ​

For T s < T ≤ T L T_s < T \le T_L T s ​ < T ≤ T L ​ (where T L T_L T L ​ is the mapped long-period transition period, typically 4–12 s): S a = S D 1 T S_a = \frac{S_{D1}}{T} S a ​ = T S D 1 ​ ​

  • For T > T L T > T_L T > T L ​ : S a = S D 1 T L T 2 S_a = \frac{S_{D1} T_L}{T^2} S a ​ = T 2 S D 1 ​ T L ​ ​
  • 6. Seismic Hazard Analysis: PSHA vs. DSHA

Evaluation of ground motion hazards is performed using two alternative paradigms:

Deterministic Seismic Hazard Analysis (DSHA):

Selects a specific controlling seismic source scenario (controlling fault, maximum credible earthquake magnitude M m a x M_{max} M ma x ​ , and minimum distance R R R ).

Uses Ground Motion Models (GMMs / attenuation relations) to compute median or 84th-percentile ground motion intensity parameters.

Produces a single controlling worst-case ground motion scenario but ignores earthquake recurrence frequencies.

Probabilistic Seismic Hazard Analysis (PSHA):

Accounts for all potential seismic sources, rupture probabilities, magnitude recurrence statistics (Gutenberg-Richter relation log ⁡ N = a − b M \log N = a - bM lo g N = a − b M ), and ground motion variability.

Integrates probability distributions over magnitude, distance, and ground motion attenuation to construct a site seismic hazard curve (annual rate of exceedance λ \lambda λ vs. peak parameter).

Standard PE exam design return periods:

Design Earthquake (DE): 10% probability of exceedance in 50 years → \rightarrow → Return Period T R ≈ 475 years T_R \approx 475\text{ years} T R ​ ≈ 475 years .

Maximum Considered Earthquake ( M C E R MCE_R MC E R ​ ): 2% probability of exceedance in 50 years → \rightarrow → Return Period T R ≈ 2 , 475 years T_R \approx 2,475\text{ years} T R ​ ≈ 2 , 475 years . λ = − ln ⁡ ( 1 − P e ) t ⟹ T R = 1 λ \lambda = -\frac{\ln(1 - P_e)}{t} \implies T_R = \frac{1}{\lambda} λ = − t ln ( 1 − P e ​ ) ​ ⟹ T R ​ = λ 1 ​

Deaggregation: Identifies the principal contributing earthquake magnitude ( M ∗ M^* M ∗ ) and source distance ( R ∗ R^* R ∗ ) that govern the probabilistic hazard at a specific design period.

7. Field & Geophysical Testing Techniques

Determination of dynamic subsurface profile properties relies on specialized field methods:

Crosshole Seismic Survey (ASTM D4428): Involves two or more cased boreholes. S-waves are generated in one hole and recorded at identical depths in adjacent holes. Provides highly accurate, direct layer-by-layer V s V_s V s ​ measurements.

Downhole Seismic Survey: Uses a single borehole. Surface impact source generates waves detected by a downhole geophone receiver array at incremental depths.

Multichannel Analysis of Surface Waves (MASW): Non-destructive surface wave method measuring Rayleigh wave dispersion to invert V s V_s V s ​ profile without drilling.

Seismic CPT (sCPT): Geophone embedded inside CPT cone allows simultaneous measurement of tip resistance q c q_c q c ​ , sleeve friction f s f_s f s ​ , pore pressure u 2 u_2 u 2 ​ , and interval shear wave velocity V s V_s V s ​ .

8. Comprehensive Step-by-Step Worked Example

Problem Statement:

A geotechnical site investigation for a high-rise foundation in Seattle, WA provides the following subsurface stratigraphy down to 30 meters depth:

Layer 1 ( 0 − 4 m 0 - 4\text{ m} 0 − 4 m ): Loose silty sand, V s 1 = 140 m/s V_{s1} = 140\text{ m/s} V s 1 ​ = 140 m/s

Layer 2 ( 4 − 12 m 4 - 12\text{ m} 4 − 12 m ): Dense sand, V s 2 = 260 m/s V_{s2} = 260\text{ m/s} V s 2 ​ = 260 m/s

Layer 3 ( 12 − 22 m 12 - 22\text{ m} 12 − 22 m ): Very dense gravelly sand, V s 3 = 420 m/s V_{s3} = 420\text{ m/s} V s 3 ​ = 420 m/s

Layer 4 ( 22 − 30 m 22 - 30\text{ m} 22 − 30 m ): Weathered bedrock, V s 4 = 650 m/s V_{s4} = 650\text{ m/s} V s 4 ​ = 650 m/s

Mapped short-period acceleration S s = 1.50 g S_s = 1.50g S s ​ = 1.50 g and 1-second period acceleration S 1 = 0.60 g S_1 = 0.60g S 1 ​ = 0.60 g .

Site amplification coefficients from ASCE 7 for this Site Class are F a = 1.00 F_a = 1.00 F a ​ = 1.00 and F v = 1.50 F_v = 1.50 F v ​ = 1.50 .

Calculate:

The 30-meter average shear wave velocity ( V s 30 V_{s30} V s 30 ​ ).

Determine the ASCE 7 Site Class.

Compute design spectral parameters S D S S_{DS} S D S ​ , S D 1 S_{D1} S D 1 ​ , and transition periods T 0 T_0 T 0 ​ and T s T_s T s ​ .

Calculate the Design Spectral Acceleration S a S_a S a ​ at a structural period T = 0.50 s T = 0.50\text{ s} T = 0.50 s .

Solution:

Step 1: Compute V s 30 V_{s30} V s 30 ​

Layer thicknesses ( d i d_i d i ​ ):

Layer 1: d 1 = 4 m d_1 = 4\text{ m} d 1 ​ = 4 m , V s 1 = 140 m/s ⟹ d 1 V s 1 = 4 140 = 0.02857 s V_{s1} = 140\text{ m/s} \implies \frac{d_1}{V_{s1}} = \frac{4}{140} = 0.02857\text{ s} V s 1 ​ = 140 m/s ⟹ V s 1 ​ d 1 ​ ​ = 140 4 ​ = 0.02857 s

Layer 2: d 2 = 8 m d_2 = 8\text{ m} d 2 ​ = 8 m , V s 2 = 260 m/s ⟹ d 2 V s 2 = 8 260 = 0.03077 s V_{s2} = 260\text{ m/s} \implies \frac{d_2}{V_{s2}} = \frac{8}{260} = 0.03077\text{ s} V s 2 ​ = 260 m/s ⟹ V s 2 ​ d 2 ​ ​ = 260 8 ​ = 0.03077 s

Layer 3: d 3 = 10 m d_3 = 10\text{ m} d 3 ​ = 10 m , V s 3 = 420 m/s ⟹ d 3 V s 3 = 10 420 = 0.02381 s V_{s3} = 420\text{ m/s} \implies \frac{d_3}{V_{s3}} = \frac{10}{420} = 0.02381\text{ s} V s 3 ​ = 420 m/s ⟹ V s 3 ​ d 3 ​ ​ = 420 10 ​ = 0.02381 s

Layer 4: d 4 = 8 m d_4 = 8\text{ m} d 4 ​ = 8 m , V s 4 = 650 m/s ⟹ d 4 V s 4 = 8 650 = 0.01231 s V_{s4} = 650\text{ m/s} \implies \frac{d_4}{V_{s4}} = \frac{8}{650} = 0.01231\text{ s} V s 4 ​ = 650 m/s ⟹ V s 4 ​ d 4 ​ ​ = 650 8 ​ = 0.01231 s

Total travel time through upper 30 meters: ∑ i = 1 4 d i V s i = 0.02857 + 0.03077 + 0.02381 + 0.01231 = 0.09546 s \sum_{i=1}^{4} \frac{d_i}{V_{si}} = 0.02857 + 0.03077 + 0.02381 + 0.01231 = 0.09546\text{ s} i = 1 ∑ 4 ​ V s i ​ d i ​ ​ = 0.02857 + 0.03077 + 0.02381 + 0.01231 = 0.09546 s V s 30 = 30 m 0.09546 s = 314.3 m/s \mathbf{V_{s30}} = \frac{30\text{ m}}{0.09546\text{ s}} = \mathbf{314.3\text{ m/s}} V s30 ​ = 0.09546 s 30 m ​ = 314.3 m/s

Step 2: ASCE 7 Site Class Determination

Since 180 m/s ≤ V s 30 = 314.3 m/s ≤ 360 m/s 180\text{ m/s} \le V_{s30} = 314.3\text{ m/s} \le 360\text{ m/s} 180 m/s ≤ V s 30 ​ = 314.3 m/s ≤ 360 m/s , the site is classified as Site Class D (Stiff Soil) .

Step 3: Calculate Design Spectral Parameters

S M S = F a S s = 1.00 × 1.50 g = 1.50 g S_{MS} = F_a S_s = 1.00 \times 1.50g = 1.50g S MS ​ = F a ​ S s ​ = 1.00 × 1.50 g = 1.50 g

S M 1 = F v S 1 = 1.50 × 0.60 g = 0.90 g S_{M1} = F_v S_1 = 1.50 \times 0.60g = 0.90g S M 1 ​ = F v ​ S 1 ​ = 1.50 × 0.60 g = 0.90 g

S D S = 2 3 S M S = 2 3 × 1.50 g = 1.00 g S_{DS} = \frac{2}{3} S_{MS} = \frac{2}{3} \times 1.50g = \mathbf{1.00g} S D S ​ = 3 2 ​ S MS ​ = 3 2 ​ × 1.50 g = 1.00g

S D 1 = 2 3 S M 1 = 2 3 × 0.90 g = 0.60 g S_{D1} = \frac{2}{3} S_{M1} = \frac{2}{3} \times 0.90g = \mathbf{0.60g} S D 1 ​ = 3 2 ​ S M 1 ​ = 3 2 ​ × 0.90 g = 0.60g

Transition periods:

T s = S D 1 S D S = 0.60 g 1.00 g = 0.60 s T_s = \frac{S_{D1}}{S_{DS}} = \frac{0.60g}{1.00g} = \mathbf{0.60\text{ s}} T s ​ = S D S ​ S D 1 ​ ​ = 1.00 g 0.60 g ​ = 0.60 s

T 0 = 0.20 × T s = 0.20 × 0.60 s = 0.12 s T_0 = 0.20 \times T_s = 0.20 \times 0.60\text{ s} = \mathbf{0.12\text{ s}} T 0 ​ = 0.20 × T s ​ = 0.20 × 0.60 s = 0.12 s

Step 4: Calculate Design Acceleration S a ( T = 0.50 s ) S_a(T = 0.50\text{ s}) S a ​ ( T = 0.50 s )

Since T 0 ( 0.12 s ) ≤ T ( 0.50 s ) ≤ T s ( 0.60 s ) T_0 (0.12\text{ s}) \le T (0.50\text{ s}) \le T_s (0.60\text{ s}) T 0 ​ ( 0.12 s ) ≤ T ( 0.50 s ) ≤ T s ​ ( 0.60 s ) , the building period falls within the plateau region of the design spectrum: S a ( 0.50 s ) = S D S = 1.00 g \mathbf{S_a(0.50\text{ s})} = S_{DS} = \mathbf{1.00g} S a ​ ( 0.50 s ) = S D S ​ = 1.00g

Loading diagram... ASCE 7 Design Response Spectrum Regions