Study guide

6.4 Subsurface Drainage Systems & Filter Criteria

PE Civil Geotechnical Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Site Characterization

1.1 Site Data Interpretation & Boring Plans 1.2 In Situ Testing & Field Exploration 1.3 Soil and Rock Classification Systems 1.4 Groundwater Characterization & Hydrogeology

2 Chapter 2: Soil Mechanics, Laboratory Testing, and Analysis

2.1 Weight-Volume Phase Relationships & Index Properties 2.2 Effective Stress & Pore Water Pressure Dynamics 2.3 Shear Strength Principles & Laboratory Testing 2.4 Permeability, Hydraulic Conductivity & Seepage Properties 2.5 Consolidation & Compressibility Analysis

3 Chapter 3: Construction Observation, Monitoring, QA/QC, and Safety

3.1 Earthwork Quality Control & Compaction Verification 3.2 Geotechnical Instrumentation & Field Monitoring 3.3 Trenching, Excavation Safety & OSHA Shoring Requirements 3.4 Erosion, Scour Protection & Slope Protection During Construction

4 Chapter 4: Earthquake Engineering and Dynamic Loads

4.1 Seismic Site Characterization & Ground Motion Hazards 4.2 Soil Liquefaction Triggering & Post-Liquefaction Assessment 4.3 Dynamic Soil Properties & Ground Response Analysis 4.4 Pseudostatic Analysis & Seismic Geotechnical Design

5 Chapter 5: Earth Structures, Ground Improvement, and Pavement

5.1 Slope Stability Analysis & Limit Equilibrium Methods 5.2 Embankments, Earth Dams & Levee Geotechnics 5.3 Ground Improvement Techniques & Design 5.4 Geosynthetics in Geotechnical Engineering 5.5 Flexible & Rigid Pavement Subgrades & Buried Utilities 5.6 Landfills, Caps & Containment Systems

6 Chapter 6: Groundwater and Seepage

6.1 Dewatering System Design & Well Drawdown 6.2 Flow Nets & Two-Dimensional Seepage Analysis 6.3 Uplift Pressure, Piping & Heave Safety 6.4 Subsurface Drainage Systems & Filter Criteria

7 Chapter 7: Problematic Soil and Rock Conditions

7.1 Expansive & Collapsible Soil Engineering 7.2 Organic Soils, Sensitive Clays & Soft Marine Deposits 7.3 Corrosive, Frost-Susceptible & Degradable Formations 7.4 Karst Topography, Rock Slopes & Rockfall Hazards

8 Chapter 8: Retaining Structures

8.1 Lateral Earth Pressure Theories 8.2 Rigid Retaining Wall Design 8.3 Flexible Retaining Walls & Sheet Pile Bulkheads 8.4 Temporary Support of Excavations 8.5 Mechanically Stabilized Earth (MSE) Walls & Soil Nail Structures 8.6 Cofferdams, Underpinning & Adjacent Infrastructure Effects

9 Chapter 9: Shallow Foundations

9.1 Ultimate & Allowable Bearing Capacity Theories 9.2 Effective Footing Area, Eccentricity & Combined Footings 9.3 Induced Stress Distribution & Immediate Elastic Settlement 9.4 Consolidation Settlement & Mat/Raft Foundation Design

10 Chapter 10: Deep Foundations

10.1 Driven Pile Axial Capacity & Settlement 10.2 Drilled Shaft Axial Design & Construction Methods 10.3 Lateral Load Behavior of Deep Foundations 10.4 Pile Group Dynamics, Efficiency & Downdrag 10.5 Dynamic Load Testing & Pile Integrity Evaluation

6.4 Subsurface Drainage Systems & Filter Criteria

Key Takeaways Explain This Topic AI

Terzaghi's retention criterion mandates D_{15,filter} / D_{85,base} <= 4 to 5 to prevent base soil particles from washing into and clogging the filter layer.

Terzaghi's permeability criterion requires D_{15,filter} / D_{15,base} >= 4 to 5 to ensure the filter provides free drainage without building up pore pressure.

To prevent segregation in granular filters, the coefficient of uniformity should satisfy C_u = D_{60}/D_{10} <= 20, and gap-graded aggregates should be strictly avoided.

Perforated drain pipe slot widths must not exceed D_{85,filter} (Slot Width <= D_{85,filter}), and circular hole diameters must not exceed 1.2 x D_{85,filter} to prevent filter aggregate intrusion.

Geotextile filter design relies on Apparent Opening Size (AOS or O 95 O_{95} O 95 ​ ), requiring O 95 ≤ D 85 , b a s e O_{95} \leq D_{85,base} O 95 ​ ≤ D 85 , ba se ​ (or O 95 ≤ 2 × D 85 O_{95} \leq 2 \times D_{85} O 95 ​ ≤ 2 × D 85 ​ depending on soil C u C_u C u ​ ) for retention and adequate cross-plane permittivity ( ψ ≥ 10 ⋅ ψ s o i l \psi \geq 10 \cdot \psi_{soil} ψ ≥ 10 ⋅ ψ so i l ​ ).

Last updated: July 2026

  • 6.4 Subsurface Drainage Systems & Filter Criteria
  • Subsurface Drainage Purpose & System Elements

Subsurface drainage systems are designed to collect and convey groundwater away from structural foundations, earth retaining walls, slopes, and pavement subgrades. Effective drainage lowers excess hydrostatic pressures, prevents seepage-induced slope shear failures, eliminates frost heave, and safeguards against internal soil erosion (piping). A complete drainage system consists of three functional elements: Filter Layer (protects base soil from erosion), Drainage Layer (high-permeability conduit zone), and Collector Pipe Network (transports collected water to an outfall). TYPICAL SUBSURFACE TRENCH DRAIN CROSS-SECTION

  • |===================================| Ground Surface
  • | Impervious Clay Cap |
  • |-----------------------------------|
  • | | | |
  • | | Granular Filter Aggregate | |
  • | | Envelope (D15, D85) | | Trench Wall
  • | G| | G| (Base Soil D15, D85)
  • | E| /=======\ | E|
  • | O| / Slot \ | O|
  • | T| | Perforated| | T|
  • | E| | Collector | | E|
  • | X| \ Pipe / | X|
  • | | \=======/ | |
  • |===================================|
  • Granular Filter Design Principles & Terzaghi Criteria

To perform effectively, a filter surrounding a base soil must satisfy two conflicting requirements: Retention (void spaces must be small enough to hold back base soil grains) and Permeability (void spaces must be large enough to allow water to pass without creating back-pressure).

Terzaghi & USACE Classic Filter Rules

Karl Terzaghi established criteria relating the grain size distribution of the filter material to the base soil, using grain diameters D 15 D_{15} D 15 ​ and D 85 D_{85} D 85 ​ (diameters corresponding to 15% and 85% passing by weight):

Retention / Piping Criterion: To prevent base soil particles from migrating into filter voids: D 15 , filter D 85 , base ≤ 4 to 5 \frac{D_{15,\text{filter}}}{D_{85,\text{base}}} \le 4 \text{ to } 5 D 85 , base ​ D 15 , filter ​ ​ ≤ 4 to 5

Permeability / Free-Drainage Criterion: To ensure filter permeability is significantly higher than base soil permeability ( k filter ≈ 20 − 25 × k base k_{\text{filter}} \approx 20-25 \times k_{\text{base}} k filter ​ ≈ 20 − 25 × k base ​ ): D 15 , filter D 15 , base ≥ 4 to 5 \frac{D_{15,\text{filter}}}{D_{15,\text{base}}} \ge 4 \text{ to } 5 D 15 , base ​ D 15 , filter ​ ​ ≥ 4 to 5

Segregation & Uniformity Criterion: To avoid aggregate segregation during placement, the filter material should be uniformly graded: C u = D 60 , filter D 10 , filter ≤ 20 C_u = \frac{D_{60,\text{filter}}}{D_{10,\text{filter}}} \le 20 C u ​ = D 10 , filter ​ D 60 , filter ​ ​ ≤ 20

Prevent Base Soil Gap-Grading: The grain size distribution curve of the filter should be roughly parallel to the grain size distribution curve of the protected base soil.

Modern Refinements (USACE & NRCS Soil Categories)

The U.S. Army Corps of Engineers (USACE) and Natural Resources Conservation Service (NRCS) refined Terzaghi criteria by categorizing base soils according to percent passing the U.S. No. 200 sieve ( 0.075 mm 0.075\text{ mm} 0.075 mm ):

Soil Category Base Soil Description Sieve #200 Passing ( < 0.075 mm <0.075\text{ mm} < 0.075 mm ) Max Allowable Filter D 15 D_{15} D 15 ​ Retention Limit

Category 1 Fine Silts & Clays > 85 % > 85\% > 85% D 15 , filter ≤ 9 ⋅ D 85 , base D_{15,\text{filter}} \le 9 \cdot D_{85,\text{base}} D 15 , filter ​ ≤ 9 ⋅ D 85 , base ​ (or ≤ 0.5 mm \le 0.5\text{ mm} ≤ 0.5 mm )

Category 2 Silty/Clayey Sands 40 % − 85 % 40\% - 85\% 40% − 85% D 15 , filter ≤ 0.5 mm D_{15,\text{filter}} \le 0.5\text{ mm} D 15 , filter ​ ≤ 0.5 mm

Category 3 Silty Sands 15 % − 40 % 15\% - 40\% 15% − 40% D 15 , filter ≤ ( 40 − % # 200 ) / ( 40 − 15 ) ⋅ ( 4 D 85 − D 15 ) + D 15 D_{15,\text{filter}} \le (40 - \%\#200)/(40-15) \cdot (4 D_{85} - D_{15}) + D_{15} D 15 , filter ​ ≤ ( 40 − %#200 ) / ( 40 − 15 ) ⋅ ( 4 D 85 ​ − D 15 ​ ) + D 15 ​

Category 4 Clean Sands & Gravels < 15 % < 15\% < 15% D 15 , filter ≤ 4 to 5 ⋅ D 85 , base D_{15,\text{filter}} \le 4 \text{ to } 5 \cdot D_{85,\text{base}} D 15 , filter ​ ≤ 4 to 5 ⋅ D 85 , base ​

Perforated Collector Pipe Sizing

Perforated carrier pipes (corrugated HDPE or PVC underdrains) collect water from granular filter envelopes. Pipe perforations must be sized relative to the surrounding filter aggregate to prevent aggregate entry:

Slot Width Limit: Slot Width ≤ D 85 , filter \text{Slot Width} \le D_{85,\text{filter}} Slot Width ≤ D 85 , filter ​

Circular Hole Diameter Limit: Hole Diameter ≤ 1.2 ⋅ D 85 , filter \text{Hole Diameter} \le 1.2 \cdot D_{85,\text{filter}} Hole Diameter ≤ 1.2 ⋅ D 85 , filter ​

Pipe Flow Capacity (Manning's Equation):

Full-pipe volumetric discharge Q p i p e Q_{pipe} Q p i p e ​ is checked using Manning's equation: Q p i p e = k n n ⋅ A ⋅ R h 2 / 3 ⋅ S 1 / 2 Q_{pipe} = \frac{k_{n}}{n} \cdot A \cdot R_h^{2/3} \cdot S^{1/2} Q p i p e ​ = n k n ​ ​ ⋅ A ⋅ R h 2/3 ​ ⋅ S 1/2

Where n n n is Manning's roughness coefficient ( n ≈ 0.010 − 0.012 n \approx 0.010-0.012 n ≈ 0.010 − 0.012 for smooth PVC, n ≈ 0.015 − 0.020 n \approx 0.015-0.020 n ≈ 0.015 − 0.020 for corrugated HDPE), A A A is pipe area, R h = D p i p e / 4 R_h = D_{pipe}/4 R h ​ = D p i p e ​ /4 is hydraulic radius, S S S is pipe slope, and k n = 1.0 k_n = 1.0 k n ​ = 1.0 (SI units) or 1.486 1.486 1.486 (English units).

Geosynthetic Filters (Geotextiles)

Nonwoven needle-punched geotextiles frequently replace or augment aggregate filters due to lower installation costs and ease of construction. Geotextile design evaluates three critical criteria:

1. Geotextile Retention Criterion (Apparent Opening Size, A O S / O 95 AOS / O_{95} A OS / O 95 ​ ):

The Apparent Opening Size ( O 95 O_{95} O 95 ​ ) represents the sieve opening size where 95% of geotextile pores are smaller.

For steady flow in granular soils with C u ≤ 2 C_u \le 2 C u ​ ≤ 2 or C u ≥ 8 C_u \ge 8 C u ​ ≥ 8 : O 95 , geotextile ≤ D 85 , base O_{95,\text{geotextile}} \le D_{85,\text{base}} O 95 , geotextile ​ ≤ D 85 , base ​

For soils with 2 < C u < 8 2 < C_u < 8 2 < C u ​ < 8 : O 95 , geotextile ≤ B ⋅ D 85 , base where B = C u 2 to 1.5 O_{95,\text{geotextile}} \le B \cdot D_{85,\text{base}} \quad \text{where } B = \frac{C_u}{2} \text{ to } 1.5 O 95 , geotextile ​ ≤ B ⋅ D 85 , base ​ where B = 2 C u ​ ​ to 1.5

2. Geotextile Cross-Plane Permittivity Criterion ( ψ \psi ψ ):

Permittivity ψ \psi ψ measures flow capacity perpendicular to the geotextile plane ( k g / t g k_g / t_g k g ​ / t g ​ ): ψ = k g t g ≥ 10 ⋅ ψ soil = 10 ⋅ ( k soil L soil ) \psi = \frac{k_{g}}{t_g} \ge 10 \cdot \psi_{\text{soil}} = 10 \cdot \left(\frac{k_{\text{soil}}}{L_{\text{soil}}}\right) ψ = t g ​ k g ​ ​ ≥ 10 ⋅ ψ soil ​ = 10 ⋅ ( L soil ​ k soil ​ ​ )

3. Clogging Resistance:

To prevent fines from clogging geotextile pores, nonwoven geotextiles should have a percent open area A O ≥ 4 % A_O \ge 4\% A O ​ ≥ 4% , or satisfy Gradient Ratio test criteria ( G R ≤ 3.0 GR \le 3.0 GR ≤ 3.0 ).

Subsurface Drainage Configurations & Prefabricated Vertical Drains

Chimney Drains: Inclined or vertical aggregate drainage layers placed inside earth dams to intercept embankment core seepage.

Blanket Drains: Horizontal drainage layers beneath dam downstream toes, highway pavements, or building basements.

French / Trench Drains: Deep narrow trenches filled with filter aggregate enclosing a perforated pipe.

Prefabricated Vertical Drains (PVDs / Wick Drains): Flat plastic cores wrapped in nonwoven geotextile installed on 1.0 − 2.5 m 1.0-2.5\text{ m} 1.0 − 2.5 m grids into thick soft clay deposits. PVDs convert slow vertical 1D consolidation into rapid radial horizontal drainage, reducing primary consolidation time from years to months ( t ∝ H d 2 t \propto H_d^2 t ∝ H d 2 ​ ).

  • Worked Numerical Examples
  • Worked Example 1: Granular Filter Design

Problem Statement: A base sand protecting an embankment core has the following grain size metrics: D 15 , base = 0.03 mm D_{15,\text{base}} = 0.03\text{ mm} D 15 , base ​ = 0.03 mm and D 85 , base = 0.24 mm D_{85,\text{base}} = 0.24\text{ mm} D 85 , base ​ = 0.24 mm . Design the allowable D 15 D_{15} D 15 ​ grain size range for a granular filter aggregate according to classic Terzaghi criteria.

Solution:

Calculate Retention Limit ( D 15 , filter D_{15,\text{filter}} D 15 , filter ​ upper bound): D 15 , filter ≤ 5 ⋅ D 85 , base = 5 × 0.24 mm = 1.20 mm D_{15,\text{filter}} \le 5 \cdot D_{85,\text{base}} = 5 \times 0.24\text{ mm} = 1.20\text{ mm} D 15 , filter ​ ≤ 5 ⋅ D 85 , base ​ = 5 × 0.24 mm = 1.20 mm

Calculate Permeability Limit ( D 15 , filter D_{15,\text{filter}} D 15 , filter ​ lower bound): D 15 , filter ≥ 4 to 5 ⋅ D 15 , base = 5 × 0.03 mm = 0.15 mm D_{15,\text{filter}} \ge 4 \text{ to } 5 \cdot D_{15,\text{base}} = 5 \times 0.03\text{ mm} = 0.15\text{ mm} D 15 , filter ​ ≥ 4 to 5 ⋅ D 15 , base ​ = 5 × 0.03 mm = 0.15 mm

Specify Filter Envelope Range: 0.15 mm ≤ D 15 , filter ≤ 1.20 mm 0.15\text{ mm} \le D_{15,\text{filter}} \le 1.20\text{ mm} 0.15 mm ≤ D 15 , filter ​ ≤ 1.20 mm

Any clean sand-gravel mixture with D 15 D_{15} D 15 ​ between 0.15 mm 0.15\text{ mm} 0.15 mm and 1.20 mm 1.20\text{ mm} 1.20 mm (and C u ≤ 20 C_u \le 20 C u ​ ≤ 20 ) satisfies both retention and free drainage.

Loading diagram... Integrated Chimney and Blanket Drainage System inside Earth Dam Embankment