Study guide

6.3 Uplift Pressure, Piping & Heave Safety

PE Civil Geotechnical Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Site Characterization

1.1 Site Data Interpretation & Boring Plans 1.2 In Situ Testing & Field Exploration 1.3 Soil and Rock Classification Systems 1.4 Groundwater Characterization & Hydrogeology

2 Chapter 2: Soil Mechanics, Laboratory Testing, and Analysis

2.1 Weight-Volume Phase Relationships & Index Properties 2.2 Effective Stress & Pore Water Pressure Dynamics 2.3 Shear Strength Principles & Laboratory Testing 2.4 Permeability, Hydraulic Conductivity & Seepage Properties 2.5 Consolidation & Compressibility Analysis

3 Chapter 3: Construction Observation, Monitoring, QA/QC, and Safety

3.1 Earthwork Quality Control & Compaction Verification 3.2 Geotechnical Instrumentation & Field Monitoring 3.3 Trenching, Excavation Safety & OSHA Shoring Requirements 3.4 Erosion, Scour Protection & Slope Protection During Construction

4 Chapter 4: Earthquake Engineering and Dynamic Loads

4.1 Seismic Site Characterization & Ground Motion Hazards 4.2 Soil Liquefaction Triggering & Post-Liquefaction Assessment 4.3 Dynamic Soil Properties & Ground Response Analysis 4.4 Pseudostatic Analysis & Seismic Geotechnical Design

5 Chapter 5: Earth Structures, Ground Improvement, and Pavement

5.1 Slope Stability Analysis & Limit Equilibrium Methods 5.2 Embankments, Earth Dams & Levee Geotechnics 5.3 Ground Improvement Techniques & Design 5.4 Geosynthetics in Geotechnical Engineering 5.5 Flexible & Rigid Pavement Subgrades & Buried Utilities 5.6 Landfills, Caps & Containment Systems

6 Chapter 6: Groundwater and Seepage

6.1 Dewatering System Design & Well Drawdown 6.2 Flow Nets & Two-Dimensional Seepage Analysis 6.3 Uplift Pressure, Piping & Heave Safety 6.4 Subsurface Drainage Systems & Filter Criteria

7 Chapter 7: Problematic Soil and Rock Conditions

7.1 Expansive & Collapsible Soil Engineering 7.2 Organic Soils, Sensitive Clays & Soft Marine Deposits 7.3 Corrosive, Frost-Susceptible & Degradable Formations 7.4 Karst Topography, Rock Slopes & Rockfall Hazards

8 Chapter 8: Retaining Structures

8.1 Lateral Earth Pressure Theories 8.2 Rigid Retaining Wall Design 8.3 Flexible Retaining Walls & Sheet Pile Bulkheads 8.4 Temporary Support of Excavations 8.5 Mechanically Stabilized Earth (MSE) Walls & Soil Nail Structures 8.6 Cofferdams, Underpinning & Adjacent Infrastructure Effects

9 Chapter 9: Shallow Foundations

9.1 Ultimate & Allowable Bearing Capacity Theories 9.2 Effective Footing Area, Eccentricity & Combined Footings 9.3 Induced Stress Distribution & Immediate Elastic Settlement 9.4 Consolidation Settlement & Mat/Raft Foundation Design

10 Chapter 10: Deep Foundations

10.1 Driven Pile Axial Capacity & Settlement 10.2 Drilled Shaft Axial Design & Construction Methods 10.3 Lateral Load Behavior of Deep Foundations 10.4 Pile Group Dynamics, Efficiency & Downdrag 10.5 Dynamic Load Testing & Pile Integrity Evaluation

6.3 Uplift Pressure, Piping & Heave Safety

Key Takeaways Explain This Topic AI

The critical hydraulic gradient ( i c r i_{cr} i cr ​ ) causing quicksand/heave occurs when seepage force balances buoyant weight: i c r = γ ′ / γ w = ( G s − 1 ) / ( 1 + e ) i_{cr} = \gamma' / \gamma_w = (G_s - 1)/(1 + e) i cr ​ = γ ′ / γ w ​ = ( G s ​ − 1 ) / ( 1 + e ) , typically ranging from 0.9 to 1.1.

The factor of safety against bottom heave downstream of sheet pile walls is evaluated using Terzaghi's exit prism method: F S h e a v e = W ′ / U s e e p a g e = ( D ⋅ γ ′ ) / ( 0.5 ⋅ γ w ⋅ h l o s s ) FS_{heave} = W' / U_{seepage} = (D \cdot \gamma') / (0.5 \cdot \gamma_w \cdot h_{loss}) F S h e a v e ​ = W ′ / U see p a g e ​ = ( D ⋅ γ ′ ) / ( 0.5 ⋅ γ w ​ ⋅ h l oss ​ ) , where D D D is embedment depth.

Total hydro-seepage uplift force on structures is obtained by integrating pore pressure along the base: U = ∫ u ( x ) d x U = \int u(x) dx U = ∫ u ( x ) d x , requiring a minimum structural weight factor of safety F S u p l i f t = ∑ W / U ≥ 1.5 FS_{uplift} = \sum W / U \geq 1.5 F S u pl i f t ​ = ∑ W / U ≥ 1.5 .

Exit hydraulic gradient ( i e x i t = Δ h / Δ l e x i t i_{exit} = \Delta h / \Delta l_{exit} i e x i t ​ = Δ h /Δ l e x i t ​ ) must satisfy F S p i p i n g = i c r / i e x i t ≥ FS_{piping} = i_{cr} / i_{exit} \geq F S p i p in g ​ = i cr ​ / i e x i t ​ ≥ 3.0 to 4.0 to prevent backward erosion piping in cohesionless soils.

Piping risk is mitigated by increasing seepage path length (cutoff walls, clay aprons), constructing downstream inverted weighted filters, or installing relief wells.

Last updated: July 2026

  • 6.3 Uplift Pressure, Piping & Heave Safety
  • Seepage Force & Quick Condition Mechanics

Water seeping through soil exerts a drag force on individual soil grains known as seepage force . Per unit volume of soil mass ( V = 1.0 m 3 V = 1.0\text{ m}^3 V = 1.0 m 3 ), the seepage force vector j \mathbf{j} j acts parallel to the hydraulic gradient vector i \mathbf{i} i : j = i ⋅ γ w j = i \cdot \gamma_w j = i ⋅ γ w ​

When seepage occurs vertically upwards, the seepage drag force acts directly counter to the effective gravitational weight of the saturated soil mass. The vertical effective stress σ ′ \sigma' σ ′ at depth z z z subject to upward seepage becomes: σ ′ ( z ) = σ t o t a l − u = γ s a t z − ( γ w z + i γ w z ) = ( γ s a t − γ w ) z − i γ w z = γ ′ z − i γ w z \sigma'(z) = \sigma_{total} - u = \gamma_{sat} z - (\gamma_w z + i \gamma_w z) = (\gamma_{sat} - \gamma_w) z - i \gamma_w z = \gamma' z - i \gamma_w z σ ′ ( z ) = σ t o t a l ​ − u = γ s a t ​ z − ( γ w ​ z + i γ w ​ z ) = ( γ s a t ​ − γ w ​ ) z − i γ w ​ z = γ ′ z − i γ w ​ z

Where γ ′ = γ s a t − γ w \gamma' = \gamma_{sat} - \gamma_w γ ′ = γ s a t ​ − γ w ​ is the submerged (buoyant) unit weight. As the upward hydraulic gradient i i i increases, effective stress σ ′ \sigma' σ ′ diminishes. At the Critical Hydraulic Gradient ( i c r i_{cr} i cr ​ ) , effective stress reaches zero: σ ′ = 0 ⟹ γ ′ z − i c r γ w z = 0 \sigma' = 0 \implies \gamma' z - i_{cr} \gamma_w z = 0 σ ′ = 0 ⟹ γ ′ z − i cr ​ γ w ​ z = 0 ∋ c r = γ ′ γ w = γ s a t − γ w γ w \ni_{cr} = \frac{\gamma'}{\gamma_w} = \frac{\gamma_{sat} - \gamma_w}{\gamma_w} ∋ cr ​ = γ w ​ γ ′ ​ = γ w ​ γ s a t ​ − γ w ​ ​

Expressing i c r i_{cr} i cr ​ in terms of specific gravity of solids G s G_s G s ​ and void ratio e e e : γ ′ = ( G s − 1 ) γ w 1 + e ⟹ i c r = G s − 1 1 + e \gamma' = \frac{(G_s - 1)\gamma_w}{1 + e} \implies i_{cr} = \frac{G_s - 1}{1 + e} γ ′ = 1 + e ( G s ​ − 1 ) γ w ​ ​ ⟹ i cr ​ = 1 + e G s ​ − 1 ​

When i ≥ i c r i \ge i_{cr} i ≥ i cr ​ , cohesionless soils (sands and silts) completely lose shear strength ( τ f = σ ′ tan ⁡ ϕ ′ = 0 \tau_f = \sigma' \tan\phi' = 0 τ f ​ = σ ′ tan ϕ ′ = 0 ) and behave like a heavy liquid, creating a Quick Condition (quicksand). For typical soils ( G s ≈ 2.65 − 2.70 , e ≈ 0.5 − 0.8 G_s \approx 2.65-2.70, e \approx 0.5-0.8 G s ​ ≈ 2.65 − 2.70 , e ≈ 0.5 − 0.8 ), i c r i_{cr} i cr ​ ranges from 0.90 to 1.10 (frequently approximated as i c r ≈ 1.0 i_{cr} \approx 1.0 i cr ​ ≈ 1.0 ).

Terzaghi Exit Prism Heave Analysis

In sheeted excavations in sand where water table differential exists across embedded sheet piles, upward seepage occurs at the bottom of the excavation adjacent to the wall. Karl Terzaghi demonstrated that heave failure occurs within a finite prism of soil of width D / 2 D/2 D /2 and depth D D D (where D D D is the sheet pile embedment depth below excavation level). SHEET PILE WALL EXCAVATION BOTTOM HEAVE (TERZAGHI PRISM)

  • Sheet Pile Wall
  • ||
  • High Water ||
  • Side || Excavation Bottom
  • ~~~~~~~~~~~~~~~~~||~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  • || | |
  • || | Terzaghi Heave | Depth D
  • || | Prism (D x D/2) |
  • || | Submerged W' |
  • || v |
  • ||============================
  • || ^ Upward Seepage Force U
  • || | (h_p_avg * gamma_w * D/2)

Stability Factors for Heave Prism:

Submerged Weight of Soil Prism ( W ′ W' W ′ ): Per unit length of wall: W ′ = γ ′ ⋅ D ⋅ ( D 2 ) = 1 2 γ ′ D 2 W' = \gamma' \cdot D \cdot \left(\frac{D}{2}\right) = \frac{1}{2} \gamma' D^2 W ′ = γ ′ ⋅ D ⋅ ( 2 D ​ ) = 2 1 ​ γ ′ D 2

Upward Seepage Force on Prism Base ( U U U ): U = h ˉ p ⋅ γ w ⋅ ( D 2 ) = 1 2 h ˉ p γ w D U = \bar{h}_p \cdot \gamma_w \cdot \left(\frac{D}{2}\right) = \frac{1}{2} \bar{h}_p \gamma_w D U = h ˉ p ​ ⋅ γ w ​ ⋅ ( 2 D ​ ) = 2 1 ​ h ˉ p ​ γ w ​ D

Where h ˉ p \bar{h}_p h ˉ p ​ is the average excess piezometric pressure head along the base of the prism ( z = − D z = -D z = − D ).

Factor of Safety against Heave ( F S h e a v e FS_{heave} F S h e a v e ​ ): F S h e a v e = W ′ U = 1 2 γ ′ D 2 1 2 h ˉ p γ w D = γ ′ D h ˉ p γ w FS_{heave} = \frac{W'}{U} = \frac{\frac{1}{2} \gamma' D^2}{\frac{1}{2} \bar{h}_p \gamma_w D} = \frac{\gamma' D}{\bar{h}_p \gamma_w} F S h e a v e ​ = U W ′ ​ = 2 1 ​ h ˉ p ​ γ w ​ D 2 1 ​ γ ′ D 2 ​ = h ˉ p ​ γ w ​ γ ′ D ​

Standard geotechnical engineering specifications require F S h e a v e ≥ 1.50 to 2.00 FS_{heave} \ge 1.50 \text{ to } 2.00 F S h e a v e ​ ≥ 1.50 to 2.00 for temporary excavations, and F S h e a v e ≥ 2.00 to 3.00 FS_{heave} \ge 2.00 \text{ to } 3.00 F S h e a v e ​ ≥ 2.00 to 3.00 for permanent earth retention systems.

Base Uplift Pressure & Structural Flotation Safety

Subsurface structures such as concrete dams, weir aprons, dry docks, and deep basement slabs subjected to differential head experience hydraulic uplift forces U u p l i f t U_{uplift} U u pl i f t ​ .

Calculation of Base Uplift Pressure Profile:

Along the base of a concrete dam or mat slab of width B B B , pore water pressure u ( x ) u(x) u ( x ) at distance x x x from upstream toe is: ν ( x ) = γ w ⋅ h p ( x ) = γ w [ H 1 − n ( x ) ⋅ Δ h − z b a s e ] \nu(x) = \gamma_w \cdot h_p(x) = \gamma_w \left[ H_1 - n(x) \cdot \Delta h - z_{base} \right] ν ( x ) = γ w ​ ⋅ h p ​ ( x ) = γ w ​ [ H 1 ​ − n ( x ) ⋅ Δ h − z ba se ​ ]

Where n ( x ) n(x) n ( x ) is the cumulative equipotential drops at position x x x . The Total Uplift Force ( U U U ) per unit length is obtained by integrating u ( x ) u(x) u ( x ) across base length B B B : U = ∫ 0 B u ( x ) d x U = \int_{0}^{B} u(x) dx U = ∫ 0 B ​ u ( x ) d x UPLIFT PRESSURE DISTRIBUTION UNDER CONCRETE DAM BASE

  • Upstream Head H1 Downstream Head H2
  • ~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~
  • | | | |
  • | |________ Dam Structure ___________| |
  • | / \ |
  • | / \ |
  • | / \ |
  • |/=========================================\|
  • u_upstream |\ | u_downstream
  • = gamma_w*H1 \ / = gamma_w*H2
  • \_____ Linear/Flow Net Uplift Profile _/

Factor of Safety against Structural Flotation ( F S f l o t a t i o n FS_{flotation} F S f l o t a t i o n ​ ):

To prevent buoyant uplift (flotation) of basements or empty structures: F S f l o t a t i o n = ∑ W d e a d U u p l i f t = W c o n c r e t e + W s o i l _ c o v e r U u p l i f t ≥ 1.50 FS_{flotation} = \frac{\sum W_{dead}}{U_{uplift}} = \frac{W_{concrete} + W_{soil\_cover}}{U_{uplift}} \ge 1.50 F S f l o t a t i o n ​ = U u pl i f t ​ ∑ W d e a d ​ ​ = U u pl i f t ​ W co n cre t e ​ + W so i l _ co v er ​ ​ ≥ 1.50

Piping Mechanics & Lane's Weighted Creep Ratio

Piping (backward erosion piping) is progressive internal erosion where seepage velocities at exit points remove soil grains, creating hollow erosion pipes that track backwards upstream toward the reservoir. To prevent piping failure, the exit hydraulic gradient i e x i t i_{exit} i e x i t ​ must satisfy: F S p i p i n g = i c r i e x i t ≥ 3.0 − 4.0 FS_{piping} = \frac{i_{cr}}{i_{exit}} \ge 3.0 - 4.0 F S p i p in g ​ = i e x i t ​ i cr ​ ​ ≥ 3.0 − 4.0

Lane's Weighted Creep Theory ( C w C_w C w ​ ):

E.W. Lane developed an empirical piping risk check evaluating seepage flow path length along structural contact surfaces. Recognizing vertical contacts ( > 45 ∘ >45^\circ > 4 5 ∘ ) resist piping three times more effectively than horizontal contacts ( < 45 ∘ <45^\circ < 4 5 ∘ ): L w e i g h t e d = L V + 1 3 L H L_{weighted} = L_V + \frac{1}{3} L_H L w e i g h t e d ​ = L V ​ + 3 1 ​ L H ​ C w = L w e i g h t e d Δ H = L V + 1 3 L H Δ H C_w = \frac{L_{weighted}}{\Delta H} = \frac{L_V + \frac{1}{3} L_H}{\Delta H} C w ​ = Δ H L w e i g h t e d ​ ​ = Δ H L V ​ + 3 1 ​ L H ​ ​

Where L V L_V L V ​ is total vertical contact path length, L H L_H L H ​ is total horizontal contact path length, and Δ H \Delta H Δ H is net differential head. Minimum safe C w C_w C w ​ values specified by Lane:

  • Fine Sand: C w ≥ 7.0 C_w \ge 7.0 C w ​ ≥ 7.0
  • Medium Sand: C w ≥ 6.0 C_w \ge 6.0 C w ​ ≥ 6.0
  • Coarse Sand: C w ≥ 5.0 C_w \ge 5.0 C w ​ ≥ 5.0
  • Gravel / Clay: C w ≥ 3.0 − 4.0 C_w \ge 3.0 - 4.0 C w ​ ≥ 3.0 − 4.0
  • Engineering Countermeasures for Heave and Piping

Vertical Cutoff Walls: Driving sheet piles or slurry walls below excavation bottom increases path length L V L_V L V ​ , reducing exit gradient i e x i t i_{exit} i e x i t ​ and excess head h ˉ p \bar{h}_p h ˉ p ​ .

Downstream Weighted Filters (Inverted Filters): Placing coarse sand/gravel filter layers over downstream exit zones provides overburden surcharge W f i l t e r ′ W_{filter}' W f i lt er ′ ​ while permitting free water drainage without soil particle loss.

Relief Wells: Drilled perforated wells placed downstream relieve high sub-artesian pressures in underlying permeable layers.

Upstream Impermeable Blankets: Extended clay layers upstream lengthen horizontal seepage path L H L_H L H ​ , dissipating head prior to structure arrival.

  • Worked Numerical Examples
  • Worked Example 1: Critical Gradient & Heave Safety Factor

Problem Statement: An excavation in saturated sand ( γ s a t = 19.8 kN/m 3 \gamma_{sat} = 19.8\text{ kN/m}^3 γ s a t ​ = 19.8 kN/m 3 , G s = 2.65 G_s = 2.65 G s ​ = 2.65 ) is supported by sheet piling driven to embedment depth D = 5.0 m D = 5.0\text{ m} D = 5.0 m below the pit floor. Hydraulic analysis of the flow net reveals that average excess pressure head along the base of Terzaghi's heave prism is h ˉ p = 2.0 m \bar{h}_p = 2.0\text{ m} h ˉ p ​ = 2.0 m . Calculate:

Critical hydraulic gradient i c r i_{cr} i cr ​ .

Terzaghi heave factor of safety F S h e a v e FS_{heave} F S h e a v e ​ .

Solution:

Calculate submerged unit weight γ ′ \gamma' γ ′ and critical gradient i c r i_{cr} i cr ​ (taking γ w = 9.81 kN/m 3 \gamma_w = 9.81\text{ kN/m}^3 γ w ​ = 9.81 kN/m 3 ): γ ′ = γ s a t − γ w = 19.8 − 9.81 = 9.99 kN/m 3 \gamma' = \gamma_{sat} - \gamma_w = 19.8 - 9.81 = 9.99\text{ kN/m}^3 γ ′ = γ s a t ​ − γ w ​ = 19.8 − 9.81 = 9.99 kN/m 3 i c r = γ ′ γ w = 9.99 9.81 = 1.018 i_{cr} = \frac{\gamma'}{\gamma_w} = \frac{9.99}{9.81} = 1.018 i cr ​ = γ w ​ γ ′ ​ = 9.81 9.99 ​ = 1.018

Calculate Terzaghi heave factor of safety F S h e a v e FS_{heave} F S h e a v e ​ : F S h e a v e = γ ′ ⋅ D h ˉ p ⋅ γ w = 9.99 kN/m 3 × 5.0 m 2.0 m × 9.81 kN/m 3 = 49.95 19.62 = 2.546 ≈ 2.55 FS_{heave} = \frac{\gamma' \cdot D}{\bar{h}_p \cdot \gamma_w} = \frac{9.99\text{ kN/m}^3 \times 5.0\text{ m}}{2.0\text{ m} \times 9.81\text{ kN/m}^3} = \frac{49.95}{19.62} = 2.546 \approx 2.55 F S h e a v e ​ = h ˉ p ​ ⋅ γ w ​ γ ′ ⋅ D ​ = 2.0 m × 9.81 kN/m 3 9.99 kN/m 3 × 5.0 m ​ = 19.62 49.95 ​ = 2.546 ≈ 2.55

Since F S h e a v e = 2.55 > 1.50 FS_{heave} = 2.55 > 1.50 F S h e a v e ​ = 2.55 > 1.50 , the excavation base is safe against bottom heave.

Loading diagram... Decision Flowchart for Geotechnical Seepage Instability Analysis and Countermeasures